MSDS Ken Tool

This SDS is being provided to your company for the purpose of providing current health and safety information
to your management
and for your employees who work with this product. Please read the information on these sheets and then provide this information to
those people at your company whose responsibility it is to comply with FEDERAL, STATE and COMMUNITY RIGHT TO KNOW
regulations. Also, make this information available to any employee who requests it.
If Ken-Tool considers the formula of this product to be a trade secret, the exact chemical names of the ingredient(s) and the
percentages in which they are combined will not appear in the body of this sheet. The exact composition is available upon request to
physicians, industrial hygienists and other health professionals. For chemical emergencies, spills, leaks, fire or exposure call
CHEMTREC (800) 424-9300, in Canada CANUTEC 613-996-6666.
All non-emergency questions should be directed to customer service Phone: (330) 535-7177 Fax: (330) 535-1345
for assistance. Ken-Tool 768 E. North St. Akron, OH 44305
Ken-Tool Heavy Paste
1. Identification of the substance/preparation and of the

company/undertaking
Trade Name: Heavy Paste
Product Code: 35840
Relevant identified uses of the substance or mixture and uses advised against:
Tire Mounting & Bead Pack Lubricant
Details of the supplier of the safety data sheet:

This Safety Data Sheet has been updated in accordance with the Global Harmonized
System (GHS)
Manufacturer/Supplier:
Niagara Lubricant Co., Inc.
PO Box 369
Buffalo, NY 14207
Tel: (716) 874-2300
Fax: (716) 874-8092
Information Department:
SDS Coordinator (716) 874-2300
Emergency telephone number:

See preface at top of page for CHEMTREC
2. Hazards Identification
Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008
GHS06 Skull and crossbones
Acute Tox. 1 H304 May be fatal if swallowed
GHS07
Acute Tox. 5 H313 May be harmful in contact with skin

Eye Irrit. 2B H320 Causes eye irriation
Label elements:
Labeling according to Regulation (EC) No 1272/2008
The product is classified and labeled according to the CLP regulation.
Hazard Pictograms: None printed on label
Signal word: Warning
Hazard determining components of labeling: None listed on label
Hazard Statements
H320 Causes eye irritation.
Precautionary Statements
P301/P310 IF SWALLOWED: Immediately call a POISON CENTER or
doctor/physician.
P305/P351/P338 IF IN EYES: Rinse continually with water for several minutes. Remove
contact lenses if easy to do so. Continue rinsing.
Classification system:
NFPA ratings
Health: 1
Fire: 0
Reactivity: 0
HMIS ratings
Health: 1
Fire: 0
Reactivity: 0
Other Hazards:
Results of PBT and vPvB assessment
PBT: Data not available
vPvB: Data not available
3. Composition/Information on ingredients
Chemical characterization: Mixture
Description: Tire Mounting & Bead Pack Lubricant
CAS No. Description % Range

CAS: Mixture Proprietary blend of soap
EINECS: Mixture & corrosion preventatives 0 – 100%
SVHC
This product does not contain any Substance of Very High Concern (SVHC) on the
European Chemicals Agency (ECHA) candidate list.
4. First Aid Measures

General Advice: In the case of accident or if you feel ill, seek medical attention.
Inhalation: Avoid breathing vapors or mists. Move to fresh air. Seek medical attention.
Skin contact: Wash immediately with soap and water. If skin irritation persists, seek
medical attention.
Eye contact: Rinse thoroughly with water for at least 15 minutes and seek medical
attention.
Ingestion: Induce vomiting. Seek medical attention immediately.
Information for doctor: Indication of any immediate medical attention and special
treatment needed.
5. Fire Fighting Measures
Suitable extinguishing media: Non-flammable paste
Specific hazards: Not applicable
Special protective equipment for firefighters: In the event of fire, wear self-contained
breathing apparatus.
Extinguishing media which must not be used for safety reasons: Not applicable
Specific methods: Not applicable
6. Accidental Release Measures

Personal precautions: Ensure adequate ventilation. Avoid contact with skin and eyes
Environmental precautions: Local authorities should be advised if significant spillages
cannot be contained. Do not contaminate surface water. Prevent further leakage or
spillage.
Methods and material for containment and cleaning up: Package all material in
plastic, cardboard or metal containers for disposal in compliance with all federal, state
and local regulations.
See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.
See section 13 for disposal information.
7. Handling and Storage

Handling:
Technical measures/precautions: Use only in area well ventilated area.
Safe handling advice: Avoid breathing vapors. Harmful or Fatal if Swallowed.
Storage: Store in a cool, well-ventilated area away from heat, oxidizers and all sources of
ignition.
Incompatible products: No known incompatibilities.
Specific end use(s): No further relevant information available.
8. Exposure Controls/Personal Protection

General protective and hygienic measures: The usual precautionary measures for
handling chemicals should be followed. Keep away from foodstuffs, beverages, and feed.
Remove all soiled and contaminated clothing.
Engineering measures to reduce exposure: Ensure adequate ventilation.
Respiratory protection: No personal respiratory protective equipment normally
required.
Skin and body protection: Avoid contact with skin.
Eye protection: Avoid contact with eyes. If splashes are likely to occur, wear goggles
Hand protection: Preventive skin protection—neoprene gloves.
Control Parameters
PEL: N/A
REL: N/A
TLV: N/A
Additional Information:
PEL/REL = Permissible/Recommended Exposure Limit (OSHA—Occupational Safety
and Health Administration)
TLV = Threshold Limit Value (ACGIH—American Conference of Government
Industrial Hygienists)
9. Physical and Chemical Properties

General Information
Appearance: Amber Paste
Odor: Odorless
Flash Point (method): COC > 399’F
pH @70° F: 9.5-10.5
Decomposition temperature: Not determined
Auto Ignition: Product will not self-ignite
Explosion Danger: Product is not explosive, however, may form harmful air/vapor
mixtures when heated
Explosion Limits:
LEL: Not determined
UEL: Not determined
Water Solubility: Infinite
Vapor density: >1 (air = 1)
Evaporation rate: < 1 (butyl acetate = 1)
Viscosity: N/A
Specific gravity: 1.0
10. Stability and Reactivity

Stability: Stable under recommended storage conditions.
Polymerization: None under normal processing.
Conditions to avoid: Heat, as it may produce noxious vapors/fumes.
Materials to avoid: No known incompatibilities.
Hazardous decomposition products: None reasonably foreseeable.
11. Toxicological Information
Caution: Contains diethylene glycol. Harmful or fatal if swallowed. If swallowed ,
induce vomiting. Give plenty of water. Seek medical attention. Avoid breathing vapors or
mists. Skin and eye irritant.
12. Ecological Information

Toxicity
Aquatic toxicity: No information available
General Notes: Do not allow undiluted product or large quantities of it to reach ground
water, water course, or sewage system.
Results of PBT/vPvB assessment:

PBT (Persistent Bio-accumulative & Toxic): Not determined
vPvB (Very Persistent & Very Bio-accumulative): Not determined
13. Disposal Considerations

Waste from residues / unused products: Waste disposal must be in accordance with
appropriate Federal, State, and local regulations.
Contaminated packaging: Disposal must be made according to local and federal
regulations.
Ewc waste disposal no: Not applicable
Further information: According to the European Waste Catalogue, Waste Codes are not
product specific, but application specific.
14. Transport Information

General Transportation Statement
DOT non regulated
IATA non regulated (country variations may apply)
IMDG. non regulated
Other information:
The description shown may not apply to all shipping situations. Consult 49CFR, or
appropriate Dangerous Goods Regulations, for additional description requirements and
mode-specific or quantity-specific shipping requirements
15. Regulatory Information

Safety, health, and environmental regulations/legislation specific for the substance
or mixture
SARA (Superfund Amendments and Reauthorization Act)

Section 355 (extremely hazardous substances): None of the ingredients are listed.
Section 313 (specific toxic chemical listings): None of the ingredients are listed.
TSCA (Toxic Substances Control Act): Ken-Tool certifies that all components listed
below for the subject finished product are on the TSCA Inventory of Chemical
Substances and are not subject to any chemical specific regulation under TSCA section
12(b) export notification requirements delineated at 40 CFR part 707, subpart D.
Carcinogens: None of the ingredients are listed

Reproductive toxicity: None of the ingredients are listed.
Carcinogenic Categories:
EPA (Enviromental Protection Agency): None of the ingredients are listed
IARC (International Agency for Research on Cancer): None of the ingredients are listed
NTP (National Toxicology Program): None of the ingredients are listed
16. Other Information

************************************************************************
Ken-Tool provides the information contained herein in good faith but makes no
representation as to its comprehensiveness or accuracy. This document is intended
only as a guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the information
must exercise their independent judgment in determining its appropriateness for a
particular purpose. Ken-Tool MAKES NO REPRESENTATIONS OR
WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET
FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION
REFERS. ACCORDINGLY, Ken-Tool WILL NOT BE RESPONSIBLE FOR
DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS
INFORMATION.
************************************************************************
Prepared by: Health & Safety
Phone Number: 905 793-4311 (Canada)
Effective Date: 03/4/13 * * * * * Supercedes: 5/4/10

MSDS Ken Tool

Uploaded by

Copyright:

Available Formats

MSDS Ken Tool

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MSDS Ken Tool

Uploaded by

Copyright:

Available Formats

This SDS is being provided to your company for the purpose of providing current health and safety information

Ken-Tool Heavy Paste

1. Identification of the substance/preparation and of the

Details of the supplier of the safety data sheet:

Emergency telephone number:

GHS06 Skull and crossbones

Acute Tox. 1 H304 May be fatal if swallowed

Acute Tox. 5 H313 May be harmful in contact with skin

Hazard Pictograms: None printed on label

Signal word: Warning

Hazard determining components of labeling: None listed on label

H320 Causes eye irritation.

CAS No. Description % Range

4. First Aid Measures

6. Accidental Release Measures

See Section 7 for information on safe handling.

7. Handling and Storage

8. Exposure Controls/Personal Protection

9. Physical and Chemical Properties

10. Stability and Reactivity

12. Ecological Information

Results of PBT/vPvB assessment:

13. Disposal Considerations

14. Transport Information

IATA non regulated (country variations may apply)

IMDG. non regulated

15. Regulatory Information

SARA (Superfund Amendments and Reauthorization Act)

Carcinogens: None of the ingredients are listed

16. Other Information

Effective Date: 03/4/13 * * * * * Supercedes: 5/4/10

You might also like