TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES

Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 1 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Permanent Facility
1 CHEMICAL- LUBRICANTS Gases Dew Point ASTM D2029
Acidity / Neutralization value
2 CHEMICAL- LUBRICANTS Insulating oil IEC 61125
after oxidation
Acidity / Neutralization value
3 CHEMICAL- LUBRICANTS Insulating oil IS : 12422
after oxidation
4 CHEMICAL- LUBRICANTS Insulating oil Acidity/ Neutralization Value IEC 62021
5 CHEMICAL- LUBRICANTS Insulating oil Corrosive Sulphur IS 1448 (Part 15)
6 CHEMICAL- LUBRICANTS Insulating oil Density IS 1448 (Part 16)
7 CHEMICAL- LUBRICANTS Insulating oil Density ISO 3675
8 CHEMICAL- LUBRICANTS Insulating oil Flash Point IS 1448 (Part 21)
9 CHEMICAL- LUBRICANTS Insulating oil Flash Point ISO 2719
10 CHEMICAL- LUBRICANTS Insulating oil IFT at 27°C ASTM D971
11 CHEMICAL- LUBRICANTS Insulating oil IFT at 27°C IS 6104
12 CHEMICAL- LUBRICANTS Insulating oil Inhibitor IEC 60666
13 CHEMICAL- LUBRICANTS Insulating oil K.viscosity at 40° C IS 1448 (Part 25)
14 CHEMICAL- LUBRICANTS Insulating oil Moisture content IEC 60814
15 CHEMICAL- LUBRICANTS Insulating oil Moisture content IS 13567
16 CHEMICAL- LUBRICANTS Insulating oil Sludge content after oxidation IEC 61125
17 CHEMICAL- LUBRICANTS Insulating oil Sludge content after oxidation IS : 12422
18 CHEMICAL- LUBRICANTS Insulating oil Sludge content after oxidation IS 12177
19 CHEMICAL- LUBRICANTS Transformer oil Acetylene ASTM D3612
20 CHEMICAL- LUBRICANTS Transformer oil Acetylene IEC 60567
21 CHEMICAL- LUBRICANTS Transformer oil Acetylene IS : 9434
22 CHEMICAL- LUBRICANTS Transformer oil Carbon Dioxide ASTM D3612
23 CHEMICAL- LUBRICANTS Transformer oil Carbon Dioxide IEC 60567
24 CHEMICAL- LUBRICANTS Transformer oil Carbon Dioxide IS : 9434
25 CHEMICAL- LUBRICANTS Transformer oil Carbon Monoxide ASTM D3612
26 CHEMICAL- LUBRICANTS Transformer oil Carbon Monoxide IEC 60567
27 CHEMICAL- LUBRICANTS Transformer oil Carbon Monoxide IS : 9434
Dissolved gas analysis (total
28 CHEMICAL- LUBRICANTS Transformer oil IEC 60567
has content )

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 2 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Dissolved gas analysis (Total
29 CHEMICAL- LUBRICANTS Transformer oil IS : 9434
gas content )
Dissolved gas analysis(total
30 CHEMICAL- LUBRICANTS Transformer oil ASTM D3612
gas content )
31 CHEMICAL- LUBRICANTS Transformer oil Ethane ASTM D3612
32 CHEMICAL- LUBRICANTS Transformer oil Ethane IEC 60567
33 CHEMICAL- LUBRICANTS Transformer oil Ethane IS : 9434
34 CHEMICAL- LUBRICANTS Transformer oil Ethylene ASTM D3612
35 CHEMICAL- LUBRICANTS Transformer oil Ethylene IEC 60567
36 CHEMICAL- LUBRICANTS Transformer oil Ethylene IS : 9434
37 CHEMICAL- LUBRICANTS Transformer oil Hydrogen ASTM D3612
38 CHEMICAL- LUBRICANTS Transformer oil Hydrogen IEC 60567
39 CHEMICAL- LUBRICANTS Transformer oil Hydrogen IS : 9434
40 CHEMICAL- LUBRICANTS Transformer oil Methane ASTM D3612
41 CHEMICAL- LUBRICANTS Transformer oil Methane IEC 60567
42 CHEMICAL- LUBRICANTS Transformer oil Methane IS : 9434
CHEMICAL- METALLIC
43 COATINGS & TREATMENT Plating Thickness (Ag) Thickness ASTM B568
SOLUTIONS
CHEMICAL- METALLIC
44 COATINGS & TREATMENT Plating Thickness (Au) Thickness ASTM B568
SOLUTIONS
CHEMICAL- METALLIC
45 COATINGS & TREATMENT Plating Thickness (Cu) Thickness ASTM B568
SOLUTIONS
CHEMICAL- METALLIC
46 COATINGS & TREATMENT Plating Thickness (Ni) Thickness ASTM B568
SOLUTIONS
CHEMICAL- METALLIC
47 COATINGS & TREATMENT Plating Thickness (Sn) Thickness ASTM B568
SOLUTIONS
CHEMICAL- METALLIC
48 COATINGS & TREATMENT Plating Thickness (Zn) Thickness ASTM B568
SOLUTIONS
CHEMICAL- METALS &
49 Brass Copper IS 3685
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 3 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
50 BRASS Lead IS 3685
ALLOYS
CHEMICAL- METALS &
51 Carbon Steel & Low Alloy Steel Carbon ISO 14707
ALLOYS
CHEMICAL- METALS &
52 Carbon Steel & Low Alloy Steel Chromium ISO 14707
ALLOYS
CHEMICAL- METALS &
53 Carbon Steel & Low Alloy Steel Copper ISO 14707
ALLOYS
CHEMICAL- METALS &
54 Carbon Steel & Low Alloy Steel Manganese ISO 14707
ALLOYS
CHEMICAL- METALS &
55 Carbon Steel & Low Alloy Steel Nickel ISO 14707
ALLOYS
CHEMICAL- METALS &
56 Carbon Steel & Low Alloy Steel Niobium ISO 14707
ALLOYS
CHEMICAL- METALS &
57 Carbon Steel & Low Alloy Steel Phosphorus ISO 14707
ALLOYS
CHEMICAL- METALS &
58 Carbon Steel & Low Alloy Steel Silicon ISO 14707
ALLOYS
CHEMICAL- METALS &
59 Carbon Steel & Low Alloy Steel Sulfur ISO 14707
ALLOYS
CHEMICAL- METALS &
60 Carbon Steel & Low Alloy Steel Titanium ISO 14707
ALLOYS
CHEMICAL- METALS &
61 Carbon Steel & Low Alloy Steel Vanadium ISO 14707
ALLOYS
CHEMICAL- METALS &
62 Copper & its alloys Oxygen Content ASTM E2575
ALLOYS
CHEMICAL- METALS &
63 Copper Phosphorus Brazing alloys Silver IS 4646 (Part 1)
ALLOYS
CHEMICAL- METALS &
64 Stainless Steel Carbon ISO 14707
ALLOYS
CHEMICAL- METALS &
65 Stainless Steel Chromium ISO 14707
ALLOYS
CHEMICAL- METALS &
66 Stainless steel Cobalt ISO 14707
ALLOYS
CHEMICAL- METALS &
67 Stainless Steel Copper ISO 14707
ALLOYS
CHEMICAL- METALS &
68 Stainless Steel Manganese ISO 14707
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 4 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
69 Stainless Steel Molybdenum ISO 14707
ALLOYS
CHEMICAL- METALS &
70 Stainless Steel Nickel ISO 14707
ALLOYS
CHEMICAL- METALS &
71 Stainless Steel Niobium ISO 14707
ALLOYS
CHEMICAL- METALS &
72 Stainless Steel Phosphorus ISO 14707
ALLOYS
CHEMICAL- METALS &
73 Stainless Steel Silicon ISO 14707
ALLOYS
CHEMICAL- METALS &
74 Stainless Steel Sulfur ISO 14707
ALLOYS
CHEMICAL- METALS &
75 Stainless Steel Titanium ISO 14707
ALLOYS
CHEMICAL- METALS &
76 Stainless Steel Vanadium ISO 14707
ALLOYS
CHEMICAL- PAINTS &
77 Enamelled round copper wire Resistance to insulating oil IS 13730 (Part 0) Sec 1
SURFACE COATING
CHEMICAL- PAINTS &
78 Paints, Enamel & Varnishes Acid/Alkali Resistance IS 14209
SURFACE COATING
CHEMICAL- PAINTS &
79 Paints, Enamel & Varnishes Color IS 5
SURFACE COATING
CHEMICAL- PAINTS &
80 Paints, Enamel & Varnishes Compatibility ASTM D3359
SURFACE COATING
CHEMICAL- PAINTS &
81 Paints, Enamel & Varnishes Consistency IS 101 (Part 1) Section 5
SURFACE COATING
CHEMICAL- PAINTS &
82 Paints, Enamel & Varnishes Drying Time, Hard IS 101 (Part 3) Section 1
SURFACE COATING
CHEMICAL- PAINTS &
83 Paints, Enamel & Varnishes Drying TIme, Surface IS 101 (Part 3) Section 1
SURFACE COATING
CHEMICAL- PAINTS &
84 Paints, Enamel & Varnishes Drying Time, Tack IS 101 (Part 3) Section 1
SURFACE COATING
CHEMICAL- PAINTS &
85 Paints, Enamel & Varnishes Finish IS : 101 (Part 3) Section 4
SURFACE COATING
CHEMICAL- PAINTS &
86 Paints, Enamel & Varnishes Nonvolatile matter % IS 101 (Part 8) Section 2
SURFACE COATING
CHEMICAL- PAINTS &
87 Paints, Enamel & Varnishes Pigment content IS 101 (Part 8) Section 2
SURFACE COATING

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 5 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- PAINTS &
88 Paints, Enamel & Varnishes Pot life IS 14209
SURFACE COATING
CHEMICAL- PAINTS &
89 Paints, Enamel & Varnishes Resistance to acid IS 2932 (Part 1)
SURFACE COATING
CHEMICAL- PAINTS &
90 Paints, Enamel & Varnishes Resistance to alkali IS 2932 (Part 1)
SURFACE COATING
CHEMICAL- PAINTS &
91 Paints, Enamel & Varnishes Resistance to heat IS 101 (Part 7) Section 3
SURFACE COATING
CHEMICAL- PAINTS &
92 Paints, Enamel & Varnishes Resistance to Humidity IS 101 (Part 6) Section 1
SURFACE COATING
CHEMICAL- PAINTS &
93 Paints, Enamel & Varnishes Scratch hardness IS 101 (Part 5) Section 2
SURFACE COATING
CHEMICAL- PAINTS &
94 Paints, Enamel & Varnishes Volatile matter % IS 101 (Part 2) Section 2
SURFACE COATING
CHEMICAL- PAINTS &
95 Paints, Enamel & Varnishes Volume solid % IS 101 (Part 8) Section 6
SURFACE COATING
CHEMICAL- PAINTS &
96 Paints, Enamel & Varnishes Wt. in Kg/ 10 ltrs. IS 101 (Part 1) Section 7
SURFACE COATING
CHEMICAL- PAINTS &
97 Varnish-bonded glass fibre-braided conductors Cure test IS 6181
SURFACE COATING
CHEMICAL- PAINTS &
98 Winding Wires Resistance to insulating oil IEC: 60851 (Part-4)
SURFACE COATING
CHEMICAL- PAINTS &
99 Winding Wires Resistance to solvent IEC: 60851 (Part-4)
SURFACE COATING
CHEMICAL- PAPER AND
100 Kraft paper, crepe and tissue paper Ash content IEC 60554 (Part 2)
PULP
CHEMICAL- PAPER AND
101 Kraft paper, crepe and tissue paper Ash content IS 9335 (Part 2)
PULP
CHEMICAL- PAPER AND Conductivity of aqueous
102 Kraft paper, crepe and tissue paper IEC 60554 (Part 2)
PULP extract.
CHEMICAL- PAPER AND Conductivity of aqueous
103 Kraft paper, crepe and tissue paper IS 9335 (Part 2)
PULP extract.
CHEMICAL- PAPER AND
104 Kraft paper, crepe and tissue paper pH of aqueous extract IEC 60554 (Part 2)
PULP
CHEMICAL- PAPER AND
105 Kraft paper, crepe and tissue paper pH of aqueous extract IS 9335 (Part 2)
PULP
CHEMICAL- PAPER AND
106 Press board and paper Moisture content TR10269P
PULP

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 6 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- PAPER AND
107 Press board and press paper Ash content ISO 2144
PULP
CHEMICAL- PAPER AND Conductivity of aqueous
108 Press board and press paper IEC 60641 (Part 2)
PULP extract.
CHEMICAL- PAPER AND
109 Press board and press paper Effect on insulating oil BS EN 60763 (Part 2)
PULP
CHEMICAL- PAPER AND
110 Press board and press paper Increase in acidity IEC 60296
PULP
CHEMICAL- PAPER AND
111 Press board and press paper Increase in acidity IEC 62021 (Part 1)
PULP
CHEMICAL- PAPER AND
112 Press board and press paper Increase in sludge content IEC 61125
PULP
CHEMICAL- PAPER AND
113 Press board and press paper pH of aqueous extract IEC 60641 (Part 2)
PULP
CHEMICAL- PAPER AND
114 Timber Moisture Content IS 11215
PULP
CHEMICAL- PLASTIC &
115 B stage resin impregnates insulating tapes & folium. Binder content IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
116 B stage resin impregnates insulating tapes & folium. Breaking load IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
117 B stage resin impregnates insulating tapes & folium. Breaking load IEC 60626 (Part 2)
RESINS
CHEMICAL- PLASTIC &
118 B stage resin impregnates insulating tapes & folium. Glass IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
119 B stage resin impregnates insulating tapes & folium. Mica IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
120 B stage resin impregnates insulating tapes & folium. Polyester IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
121 B stage resin impregnates insulating tapes & folium. Resin flow IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
122 B stage resin impregnates insulating tapes & folium. Substance IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
123 B stage resin impregnates insulating tapes & folium. Thickness IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
124 B stage resin impregnates insulating tapes & folium. Volatile matter IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
125 Moulding micanite sheet Binder content IEC 60371 (Part 2)
RESINS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 7 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- PLASTIC &
126 Moulding micanite sheet Mica IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
127 Moulding micanite sheet Mold ability IS 2464
RESINS
CHEMICAL- PLASTIC &
128 Moulding micanite sheet Substance IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
129 Moulding micanite sheet Volatile matter IEC 60371 (Part 2)
RESINS
CHEMICAL- PLASTIC &
130 Resin Epoxide Equivalent ISO 3001
RESINS
CHEMICAL- PLASTIC &
131 Resin & Hardeners Viscosity ASTM D2196
RESINS
CHEMICAL- PLASTIC &
132 Resin & Hardeners Viscosity ASTM D2196
RESINS
ELECTRICAL- CABLES &
133 Cables - Paper, Rubber, Silicone, PVC, PTFE, XLPE insulated Conductor resistance IS 10810 (Part 5)
WIRES
ELECTRICAL- CABLES &
134 Cables - Paper, Rubber, Silicone, PVC, PTFE, XLPE insulated Electrical strength/ BDV IS 10810 (Part 45)
WIRES
ELECTRICAL- CABLES & Insulation Resistance (Volume
135 Cables - Paper, Rubber, Silicone, PVC, PTFE, XLPE insulated IS 10810 (Part 43)
WIRES & Surface resistivity)
ELECTRICAL-
Bare conductors, Silver, Copper, Brass, Aluminum and
136 CONDUCTORS & Conductivity (%IACS) ASTM E 1004
alloys
CONDUCTING MATERIALS
ELECTRICAL-
Electrical Conductors (Bare conductors, Silver, Copper, Resistivity (ohm.mm2 /m)
137 CONDUCTORS & ASTM B 193
Brass, Aluminum and alloys etc.) Conductivity (MS/m))
CONDUCTING MATERIALS
ELECTRICAL-
Electrical Conductors (Bare conductors, Silver, Copper, Resistivity (ohm.mm2 /m)
138 CONDUCTORS & IS 3635
Brass, Aluminum and alloys etc.) Conductivity (mS/m))
CONDUCTING MATERIALS
ELECTRICAL-
Enameled and varnished glass covered round and
139 CONDUCTORS & Heat Shock IEC 60851 (Part 6)
rectangular copper conductor
CONDUCTING MATERIALS
ELECTRICAL-
Enameled and varnished glass covered round and
140 CONDUCTORS & Adherence IEC 60851 (Part 3)
rectangular copper conductor
CONDUCTING MATERIALS
ELECTRICAL-
Enameled and varnished glass covered round and
141 CONDUCTORS & Break down voltage IEC 60851 (Part 5)
rectangular copper conductor
CONDUCTING MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 8 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL-
Enameled and varnished glass covered round and
142 CONDUCTORS & Resistivity (ohm.mm2 /m) IS 3635
rectangular copper conductor
CONDUCTING MATERIALS
ELECTRICAL-
143 CONDUCTORS & Paper covered conductor, flexible, round, rectangular Resistivity (ohm.mm2 /m) IS 3635
CONDUCTING MATERIALS
ELECTRICAL-
144 CONDUCTORS & Polyester film mica, Kapton taped conductor Heat shock IEC 60851 (Part 6)
CONDUCTING MATERIALS
ELECTRICAL-
145 CONDUCTORS & Polyester film mica, Kapton taped conductor Adherence IEC 60851 (Part 3)
CONDUCTING MATERIALS
ELECTRICAL-
146 CONDUCTORS & Polyester film mica, Kapton taped conductor Break down voltage IEC 60851 (Part 5)
CONDUCTING MATERIALS
ELECTRICAL-
147 CONDUCTORS & Polyester film mica, Kapton taped conductor Resistivity (ohm.mm2 /m) IS 3635
CONDUCTING MATERIALS
ELECTRICAL- INSULATING
148 MATERIALS & Carbon Brush Milli Volt drop test IS 13466
INSULATORS
ELECTRICAL- INSULATING
Cotton, Glass, Woven Polyester, Rayon, Nylon, Nomex,
149 MATERIALS & Electrical strength IS 2584
Polyimide (Treated/ Untreated) Tape/ Sheet
INSULATORS
ELECTRICAL- INSULATING
Cotton, Glass, Woven Polyester, Rayon, Nylon, Nomex,
150 MATERIALS & Tensile/Breaking Strength IS 1969 (Part 1)
Polyimide (Treated/ Untreated) Tape/ Sheet
INSULATORS
ELECTRICAL- INSULATING
Cotton, Glass, Woven Polyester, Rayon, Nylon, Nomex,
151 MATERIALS & Tensile/Breaking Strength IS 7809 (Part 2)
Polyimide (Treated/ Untreated) Tape/ Sheet
INSULATORS
ELECTRICAL- INSULATING
Cotton, Glass, Woven Polyester, Rayon, Nylon, Nomex,
152 MATERIALS & Volume resistivity IS 3396
Polyimide (Treated/ Untreated) Tape/ Sheet
INSULATORS
ELECTRICAL- INSULATING
Cotton, Glass, Woven Polyester, Rayon, Nylon, Nomex,
153 MATERIALS & Water absorption ASTM D 570
Polyimide (Treated/ Untreated) Tape/ Sheet
INSULATORS
ELECTRICAL- INSULATING
154 MATERIALS & Electrical Insulators Electric strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
155 MATERIALS & Electrical Insulators Electric strength IS 9431
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 9 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
Epoxide glass fabric tube, glass filament wound epoxy
156 MATERIALS & Comparative tracking index IS 2824
bonded tube, FBR rods
INSULATORS
ELECTRICAL- INSULATING
Epoxide glass fabric tube, glass filament wound epoxy
157 MATERIALS & Electrical strength IS 2584
bonded tube, FBR rods
INSULATORS
ELECTRICAL- INSULATING
Epoxide glass fabric tube, glass filament wound epoxy
158 MATERIALS & Water absorption ASTM D 570
bonded tube, FBR rods
INSULATORS
ELECTRICAL- INSULATING
Epoxide glass fabric tube, glass filament wound epoxy
159 MATERIALS & Comparative tracking index IEC 60112
bonded tube, FBR rods
INSULATORS
ELECTRICAL- INSULATING
160 MATERIALS & Glass and Polyimide Fibre Sheet /Tape Volume resistivity ASTM D 257
INSULATORS
ELECTRICAL- INSULATING
161 MATERIALS & Insulating Oil, PXE Electrical strength IS 6792
INSULATORS
ELECTRICAL- INSULATING
162 MATERIALS & Insulating Oil, PXE Resistivity IS 6103
INSULATORS
ELECTRICAL- INSULATING
163 MATERIALS & Insulating Oil, PXE Tan delta (Dissipation factor) IS 6262
INSULATORS
ELECTRICAL- INSULATING
164 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Electrical strength IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
165 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Density IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
166 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Hill count IS 9335 (Part 3) Sec. 3
INSULATORS
ELECTRICAL- INSULATING
167 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Moisture contents IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
168 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Substance IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
169 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Tensile strength (Tensile Index) IS 9335 (Part 2)
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 10 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
170 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Thickness IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
171 MATERIALS & Kraft Paper/ Tissue Paper/ Creepe, Nomex Water absorption IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
172 MATERIALS & Kraft Paper/ Tissue Paper/Crepe, Nomax Elongation IS 9335 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
173 MATERIALS & Comparative-tracking index IEC 60112
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
174 MATERIALS & Dissipation factor ASTM D 150
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
175 MATERIALS & Comparative-tracking index IS 2824
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
176 MATERIALS & Dissipation factor IS 4486
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
177 MATERIALS & Electrical Strength IS 1998
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
178 MATERIALS & Insulation Resistance IS 1998
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
179 MATERIALS & Surface resistivity IS 3396
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy, Tensile strength & Cross
180 MATERIALS & IS 1998
Polyester, FRP, Polycarbonate, PTFE, Nylon) breaking
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
181 MATERIALS & Volume resistivity IS 3396
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
Laminated Sheets and Mouldings (Phenolic, epoxy,
182 MATERIALS & Water absorption IS 1998
Polyester, FRP, Polycarbonate, PTFE, Nylon)
INSULATORS
ELECTRICAL- INSULATING
183 MATERIALS & Mica Paper Tape and Sheet Electrical strength IS 2584
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 11 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
184 MATERIALS & Moulding, Micanite Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
185 MATERIALS & Natrium treated PTFE Tape Elongation at Break IS 7809 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
186 MATERIALS & Natrium treated PTFE Tape Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
187 MATERIALS & Natrium treated PTFE Tape Surface resistivity IS 2259
INSULATORS
ELECTRICAL- INSULATING
188 MATERIALS & Natrium treated PTFE Tape Tensile strength IS 7809 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
189 MATERIALS & Camber IS 11298 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
190 MATERIALS & Dissipation factor IEC 60674 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
191 MATERIALS & Electrical strength IS 2584
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
192 MATERIALS & Shrinkage IS 11298 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
193 MATERIALS & Space factor IEC 60674 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
194 MATERIALS & Thickness IS 11298 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
195 MATERIALS & Volume resistivity IEC 60674 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
196 MATERIALS & Water absorption ASTM D 570
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
197 MATERIALS & Tensile strength IEC 60674 (Part 2)
adhesive
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 12 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
198 MATERIALS & Camber IEC 60674 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
199 MATERIALS & Dissipation factor ASTM D 150
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
200 MATERIALS & Shrinkage IEC 60674 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
201 MATERIALS & Volume resistivity ASTM D 257
adhesive
INSULATORS
ELECTRICAL- INSULATING
Polyester film, PP film, Polyvinyl, Polyimide, adhesive / non
202 MATERIALS & Elongation at Break IEC 60674 (Part 2)
adhesive
INSULATORS
ELECTRICAL- INSULATING
203 MATERIALS & Polyester Glass Mat Sheet Comparative tracking index IEC 60112
INSULATORS
ELECTRICAL- INSULATING
204 MATERIALS & Polyester Glass Mat Sheet Dissipation factor ASTM D 150
INSULATORS
ELECTRICAL- INSULATING
205 MATERIALS & Polyester Glass Mat Sheet Comparative tracking index IS 2824
INSULATORS
ELECTRICAL- INSULATING
206 MATERIALS & Polyester Glass Mat Sheet Dissipation factor IS 4486
INSULATORS
ELECTRICAL- INSULATING
207 MATERIALS & Polyester Glass Mat Sheet Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
208 MATERIALS & Polyester Glass Mat Sheet Insulation resistance IS 1998
INSULATORS
ELECTRICAL- INSULATING
209 MATERIALS & Polyester Glass Mat Sheet Water absorption IS 1998
INSULATORS
ELECTRICAL- INSULATING
210 MATERIALS & Press Board & Press Paper Compressibility IEC 60763 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
211 MATERIALS & Press Board & Press Paper Density IEC 60763 (Part 2)
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 13 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
212 MATERIALS & Press Board & Press Paper Density IS 8570
INSULATORS
ELECTRICAL- INSULATING
213 MATERIALS & Press Board & Press Paper Electrical strength IS 8570
INSULATORS
ELECTRICAL- INSULATING
214 MATERIALS & Press Board & Press Paper Moisture contents IEC 60763 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
215 MATERIALS & Press Board & Press Paper Moisture contents IS 8570
INSULATORS
ELECTRICAL- INSULATING
216 MATERIALS & Press Board & Press Paper Oil Absorption IEC 60763 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
217 MATERIALS & Press Board & Press Paper Oil Absorption IS 8570
INSULATORS
ELECTRICAL- INSULATING
218 MATERIALS & Press Board & Press Paper Shrinkage IEC 60763 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
219 MATERIALS & Press Board & Press Paper Shrinkage IS 8570
INSULATORS
ELECTRICAL- INSULATING
220 MATERIALS & Press Board & Press Paper Tensile strength IS 8570
INSULATORS
ELECTRICAL- INSULATING
221 MATERIALS & Press Board & Press Paper Compressibility IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
222 MATERIALS & Press Board & Press Paper Density IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
223 MATERIALS & Press Board & Press Paper Electrical strength IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
224 MATERIALS & Press Board & Press Paper Electrical strength IEC 60763 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
225 MATERIALS & Press Board & Press Paper Flexibility IS 1576
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 14 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
226 MATERIALS & Press Board & Press Paper Moisture contents IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
227 MATERIALS & Press Board & Press Paper Oil Absorption IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
228 MATERIALS & Press Board & Press Paper Shrinkage IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
229 MATERIALS & Press Board & Press Paper Tensile strength IEC 60641 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
230 MATERIALS & PTFE Tape Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
231 MATERIALS & PTFE Tape Elongation at Break IS 7809 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
232 MATERIALS & PTFE Tape Surface resistance IS 2259
INSULATORS
ELECTRICAL- INSULATING
233 MATERIALS & PTFE Tape Tensile strength IS 7809 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
234 MATERIALS & PVC Adhesive/ Non Adhesive Tape Adhesion strength IS 7809 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
235 MATERIALS & PVC Adhesive/ Non Adhesive Tape Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
236 MATERIALS & PVC Sheet Flexible Tensile strength IS 3400 (Part 1)
INSULATORS
ELECTRICAL- INSULATING
237 MATERIALS & PVC Sheet Flexible Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
238 MATERIALS & PVC Sheet Flexible Tensile strength IS 6307
INSULATORS
ELECTRICAL- INSULATING
239 MATERIALS & PVC Sheet Flexible Volume resistivity IS 3396
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 15 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
240 MATERIALS & RTD, BTD Insulation Resistance IS 2848
INSULATORS
ELECTRICAL- INSULATING
241 MATERIALS & RTD, BTD HV Test IS 2584
INSULATORS
ELECTRICAL- INSULATING
242 MATERIALS & RTD, BTD Lead pull test TSD01083
INSULATORS
ELECTRICAL- INSULATING
243 MATERIALS & Rubber mat sheet Insulation resistance IS 15652
INSULATORS
ELECTRICAL- INSULATING
244 MATERIALS & Rubber, Cork Sheet Ageing characteristics IS 3400 (Part 6)
INSULATORS
ELECTRICAL- INSULATING
245 MATERIALS & Rubber, Cork Sheet Change in volume IS 4253 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
246 MATERIALS & Rubber, Cork Sheet Compressibility IS 4253 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
247 MATERIALS & Rubber, Cork Sheet Compression set IS 3400 (Part 10) Sec. 1
INSULATORS
ELECTRICAL- INSULATING
248 MATERIALS & Rubber, Cork Sheet Elongation at Break IS 3400 (Part 1)
INSULATORS
ELECTRICAL- INSULATING
249 MATERIALS & Rubber, Cork Sheet Flexibility IS 4253 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
250 MATERIALS & Rubber, Cork Sheet Hardness IS 3400 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
251 MATERIALS & Rubber, Cork Sheet Recovery IS 4253 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
252 MATERIALS & Rubber, Cork Sheet Side flow BHEL SPEC AA 59802
INSULATORS
ELECTRICAL- INSULATING
253 MATERIALS & Rubber, Cork Sheet Surface resistivity IS 3396
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 16 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
254 MATERIALS & Rubber, Cork Sheet Tensile strength IS 3400 (Part 1)
INSULATORS
ELECTRICAL- INSULATING
255 MATERIALS & Rubber, Cork Sheet Volume resistivity IS 3396
INSULATORS
ELECTRICAL- INSULATING
256 MATERIALS & Rubber, Cork, Rubber mat sheet Electrical strength IS 15652
INSULATORS
ELECTRICAL- INSULATING
257 MATERIALS & Rubber, Cork, Rubber mat sheet Electrical strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
258 MATERIALS & Seasoned Hardwood/ UDEL Wood Electrical strength IEC 61061 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
259 MATERIALS & Seasoned Hardwood/ UDEL Wood Electrical strength IS 1708 (Part 1)
INSULATORS
ELECTRICAL- INSULATING
260 MATERIALS & Sleeves Electrical strength IS 11654 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
261 MATERIALS & Sleeves Tensile strength IS 11654 (Part 2)
INSULATORS
ELECTRICAL- INSULATING
262 MATERIALS & Sleeves Water Absorption ASTM D 570
INSULATORS
ELECTRICAL- INSULATING
263 MATERIALS & Space Heaters HV Test IS 302 (Part 2) Sec. 30
INSULATORS
ELECTRICAL- INSULATING
264 MATERIALS & Space Heaters Insulation Resistance IS 302 (Part 2) Sec. 30
INSULATORS
ELECTRICAL- INSULATING
265 MATERIALS & Space Heaters Leakage current IS 302 (Part 2) Sec. 30
INSULATORS
ELECTRICAL- INSULATING
266 MATERIALS & Space Heaters Wattage IS 302 (Part 2) Sec. 30
INSULATORS
ELECTRICAL- INSULATING
267 MATERIALS & Varnish , Paint & Enamel Comparative tracking index IEC 60112
INSULATORS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 17 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- INSULATING
268 MATERIALS & Varnish , Paint & Enamel Surface Resistivity ASTM D 257
INSULATORS
ELECTRICAL- INSULATING
269 MATERIALS & Varnish , Paint & Enamel Volume Resistivity ASTM D 257
INSULATORS
ELECTRICAL- INSULATING
270 MATERIALS & Varnish , Paint & Enamel Comparative tracking index IS 2824
INSULATORS
ELECTRICAL- INSULATING
271 MATERIALS & Varnish , Paint & Enamel Electric strength IS 2584
INSULATORS
ELECTRICAL- INSULATING
272 MATERIALS & Varnish , Paint & Enamel Surface Resistivity IS 3396
INSULATORS
ELECTRICAL- INSULATING
273 MATERIALS & Varnish , Paint & Enamel Volume Resistivity IS 3396
INSULATORS
ELECTRICAL- MAGNETIC
274 Magnetic sheet steel CRNGO, CRGO Total specific Iron losses (w/kg) IEC 60404 (Part 3)
MATERIALS
ELECTRICAL- MAGNETIC
275 Magnetic sheet steel CRNGO, CRGO Adherence Test IS 649
MATERIALS
ELECTRICAL- MAGNETIC
276 Magnetic sheet steel CRNGO, CRGO Ageing Test IS 649
MATERIALS
ELECTRICAL- MAGNETIC
277 Magnetic sheet steel CRNGO, CRGO Anisotropy of losses IS 649
MATERIALS
ELECTRICAL- MAGNETIC
278 Magnetic sheet steel CRNGO, CRGO Bend Test IS 649
MATERIALS
ELECTRICAL- MAGNETIC
279 Magnetic sheet steel CRNGO, CRGO Magnetic Polarization IEC 60404 (Part 3)
MATERIALS
ELECTRICAL- MAGNETIC
280 Magnetic sheet steel CRNGO, CRGO Magnetic Polarization IS 649
MATERIALS
ELECTRICAL- MAGNETIC
281 Magnetic sheet steel CRNGO, CRGO Stacking factor IS 649
MATERIALS
ELECTRICAL- MAGNETIC
282 Magnetic sheet steel CRNGO, CRGO Surface coating thickness IS 649
MATERIALS

ELECTRICAL- MAGNETIC
283 Magnetic sheet steel CRNGO, CRGO Surface Insulation resistivity IS 649
MATERIALS
ELECTRICAL- MAGNETIC
284 Magnetic sheet steel CRNGO, CRGO Total specific Iron losses (w/kg) IS 649
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 18 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
ELECTRICAL- ROTATING Harmonic analysis of Electrical
285 Electrical machines(Transformers & Hydrogenerators ) IEC 60034 (Part 1)
ELECTRICAL MACHINES machines
ELECTRICAL- ROTATING Harmonic analysis of Electrical
286 Electrical machines(Transformers & Hydro generators) IS 7132
ELECTRICAL MACHINES machines( Cl.12.2)
MECHANICAL-
287 MECHANICAL PROPERTIES aluminium % Elongation (A) IS 1608 (Part 1)
OF METALS
MECHANICAL-
288 MECHANICAL PROPERTIES aluminium 0.2% Proof stress, (Rp) IS 1608 (Part 1)
OF METALS
MECHANICAL-
289 MECHANICAL PROPERTIES aluminium Tensile Strength (Rm) IS 1608 (Part 1)
OF METALS
MECHANICAL-
290 MECHANICAL PROPERTIES Copper material alloys & products % Elongation (A) IS 1608 (Part 1)
OF METALS
MECHANICAL-
291 MECHANICAL PROPERTIES Copper material alloys & products 0.2% Proof stress, (Rp) IS 1608 (Part 1)
OF METALS
MECHANICAL-
292 MECHANICAL PROPERTIES Copper material alloys & products Bend test IS 1599
OF METALS
MECHANICAL-
293 MECHANICAL PROPERTIES Copper material alloys & products Brinell hardness test IS1500 (Part 1)
OF METALS
MECHANICAL-
294 MECHANICAL PROPERTIES Copper material alloys & products Tensile test (Rm) IS 1608 (Part 1)
OF METALS
MECHANICAL-
295 MECHANICAL PROPERTIES Copper material alloys & products Vickers Hardness Test (HV5) IS 1501 (Part 1)
OF METALS
MECHANICAL-
296 MECHANICAL PROPERTIES Ferrous materials alloys & products % Reduction in area ASTM E8/E8M
OF METALS
MECHANICAL-
297 MECHANICAL PROPERTIES Ferrous materials alloys & products % Elongation ASTM E8/E8M
OF METALS
MECHANICAL-
298 MECHANICAL PROPERTIES Ferrous materials alloys & products % Elongation (A) IS 1608 (Part 1)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 19 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
299 MECHANICAL PROPERTIES Ferrous materials alloys & products % Reduction in area,(Z) IS 1608 (Part 1)
OF METALS
MECHANICAL-
300 MECHANICAL PROPERTIES Ferrous materials alloys & products 0.2% Proof stress, (Rp) IS 1608 (Part 1)
OF METALS
MECHANICAL-
301 MECHANICAL PROPERTIES Ferrous materials alloys & products Bend test IS 1599
OF METALS
MECHANICAL-
302 MECHANICAL PROPERTIES Ferrous materials alloys & products Rockwell (HRB scale) IS 1586 (Part1)
OF METALS
MECHANICAL-
303 MECHANICAL PROPERTIES Ferrous materials alloys & products Rockwell (HRC scale) IS 1586 (Part1)
OF METALS
MECHANICAL-
304 MECHANICAL PROPERTIES Ferrous materials alloys & products Tensile test ASTM E8/E8M
OF METALS
MECHANICAL-
305 MECHANICAL PROPERTIES Ferrous materials alloys & products Tensile test (Rm) IS 1608 (Part 1)
OF METALS
MECHANICAL-
306 MECHANICAL PROPERTIES Ferrous materials alloys & products Yield strength ASTM E8/E8M
OF METALS
MECHANICAL-
307 MECHANICAL PROPERTIES Ferrous materials alloys & products Brinell hardness test IS 1500 (Part1)
OF METALS
MECHANICAL-
308 MECHANICAL PROPERTIES Ferrous materials alloys & products Brinell hardness test IS 1500 (Part1)
OF METALS
MECHANICAL-
Charpy Impact Test, V & U
309 MECHANICAL PROPERTIES Ferrous materials alloys & products IS 1757 (Part 1)
Notch
OF METALS
MECHANICAL-
Impact Test Izod ( Room
310 MECHANICAL PROPERTIES Ferrous materials alloys & products IS 1598
temperature)
OF METALS
MECHANICAL-
311 MECHANICAL PROPERTIES Ferrous materials alloys & products Vickers Hardness Test (HV10) IS 1501 (Part 1)
OF METALS
MECHANICAL-
312 MECHANICAL PROPERTIES Ferrous materials alloys & products Vickers Hardness Test (HV30) IS 1501 (Part 1)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 20 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
313 MECHANICAL PROPERTIES silver Vickers Hardness Test (HV5) IS 1501 (Part 1)
OF METALS
MECHANICAL-
314 MECHANICAL PROPERTIES welds & welded test specimens Bend test ASME Section IX (QW-160)
OF METALS
MECHANICAL-
315 MECHANICAL PROPERTIES welds & welded test specimens Tensile Strength (Rm) ASME Section IX (QW-150)
OF METALS
MECHANICAL-
Charpy Impact Test (RT to -60
316 MECHANICAL PROPERTIES welds & welded test specimens ASME Section IX (QW-170)
deg C)
OF METALS
MECHANICAL-
317 Aluminium and aluminium alloy material and components Micro structural analysis ASM Handbook vol-9-
METALLOGRAPHY TEST
MECHANICAL- Case depth -Microscopic
318 Case hardened components IS-6416
METALLOGRAPHY TEST method
MECHANICAL- Case depth-Hardness survey
319 Case hardened components IS-6416
METALLOGRAPHY TEST method
MECHANICAL-
320 Copper and copper alloy material and components Micro structural analysis ASM Handbook vol-9-
METALLOGRAPHY TEST
MECHANICAL-
321 Copper and Copper Alloys Mercurous nitrate IS-2305
METALLOGRAPHY TEST
MECHANICAL-
322 Ferrous Macro Etch ASTM E340
METALLOGRAPHY TEST
MECHANICAL-
323 Ferrous material and components Micro structural analysis ASM Handbook vol-9
METALLOGRAPHY TEST
MECHANICAL-
324 Ferrous materials Inclusion content ASTM E – 45-18A Method - A
METALLOGRAPHY TEST
MECHANICAL-
325 Ferrous materials Macro Etch IS-11371
METALLOGRAPHY TEST
MECHANICAL-
326 Ferrous materials and components Grain size ASTM E-112
METALLOGRAPHY TEST
MECHANICAL-
327 Ferrous materials and components Micro hardness Test (HV0.1) IS:1501 Part-1
METALLOGRAPHY TEST
MECHANICAL-
328 Non Ferrous metal Alloys and components Micro hardness Test (HV0.3) IS:1501 Part-1
METALLOGRAPHY TEST
MECHANICAL-
329 Other non ferrous material and components Micro structural analysis ASM Handbook vol-9-
METALLOGRAPHY TEST

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 21 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- NOISE & Vibration measurement on
330 Rotating Machines IEC 60034-14
VIBRATION rotating electrical machines
MECHANICAL- NOISE & Vibration measurement on
331 Rotating Machines IEC 60034-14
VIBRATION rotating electrical machines
MECHANICAL- NOISE & Vibration measurement on
332 Rotating Machines IEC 60034-14
VIBRATION rotating electrical machines
MECHANICAL- NOISE & Vibration measurement on
333 Rotating Machines IS 12075
VIBRATION rotating electrical machines
MECHANICAL- NOISE & Vibration measurement on
334 Rotating Machines IS 12075
VIBRATION rotating electrical machines
Transformers/Shunt reactors
MECHANICAL- NOISE &
335 Transformers/Shunt reactors Noise level measurement on IEC 60076-10
VIBRATION
transformers and reactors
MECHANICAL- PLASTICS
336 Laminated pressboard Flexural strength IEC 60763 (Part 2)
AND PLASTIC PRODUCTS
MECHANICAL- PLASTICS
337 Thermosetting synthetic resin bonded laminated sheets Compression Strength IS 1998
AND PLASTIC PRODUCTS
MECHANICAL- PLASTICS
338 Thermosetting synthetic resin bonded laminated sheets Cross breaking Strength IS 1998
AND PLASTIC PRODUCTS
MECHANICAL- PLASTICS
339 Thermosetting synthetic resin bonded laminated sheets Shear strength IS 1998
AND PLASTIC PRODUCTS
MECHANICAL- PLASTICS
340 Thermosetting synthetic resin bonded laminated sheets Tensile strength IS 1998
AND PLASTIC PRODUCTS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 TESTING LABORATORIES, TECHNICAL SERVICES DIVISION, BHEL, TECHNICAL SERVICES
Laboratory Name :
DEPARTMENT, BHOPAL, MADHYA PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5480 Page No 22 of 22
Validity 13/10/2022 to 12/10/2024 Last Amended on 10/11/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Site Facility
MECHANICAL- NOISE & Vibration measurement on
1 Rotating Machines IS 12075
VIBRATION rotating electrical machines
Transformers/Shunt reactors
MECHANICAL- NOISE &
2 Transformers/Shunt reactors Noise level measurement on IEC 60076-10
VIBRATION
transformers and reactors

This is annexure to 'Certificate of Accreditation' and does not require any signature.