Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 225 views

    ACP Setting

    Uploaded by

    Chiranjeet Das
    This document provides instructions for resetting an alarm chain on a train coach. It describes how pulling the alarm chain causes air pressure to exhaust from the passenger emergency valve (PEV). It identifies the coach using an indicator light and describes isolating the PEV using an isolation cock if resetting fails. The document includes diagrams showing the locations of the alarm chain pulling device, indicator light, isolation cock, and PEV, as well as procedures for resetting the alarm chain and isolating or dummying the PEV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ACP Setting

    Uploaded by

    Chiranjeet Das
    225 views20 pages
    This document provides instructions for resetting an alarm chain on a train coach. It describes how pulling the alarm chain causes air pressure to exhaust from the passenger emergency valve (PEV). It identifies the coach using an indicator light and describes isolating the PEV using an isolation cock if resetting fails. The document includes diagrams showing the locations of the alarm chain pulling device, indicator light, isolation cock, and PEV, as well as procedures for resetting the alarm chain and isolating or dummying the PEV.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for resetting an alarm chain on a train coach. It describes how pulling the alarm chain causes air pressure to exhaust from the passenger emergency valve (PEV). It identifies the coach using an indicator light and describes isolating the PEV using an isolation cock if resetting fails. The document includes diagrams showing the locations of the alarm chain pulling device, indicator light, isolation cock, and PEV, as well as procedures for resetting the alarm chain and isolating or dummying the PEV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    225 views20 pages

    ACP Setting

    Uploaded by

    Chiranjeet Das
    This document provides instructions for resetting an alarm chain on a train coach. It describes how pulling the alarm chain causes air pressure to exhaust from the passenger emergency valve (PEV). It identifies the coach using an indicator light and describes isolating the PEV using an isolation cock if resetting fails. The document includes diagrams showing the locations of the alarm chain pulling device, indicator light, isolation cock, and PEV, as well as procedures for resetting the alarm chain and isolating or dummying the PEV.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 20

    BTC-CNW-BSL-C-Rly 1

    Alarm Chain Re-setting


    Alarm Chain pulling

    After pulling alarm


    chain device BP
    pressure will
    exhaust from PEV.

    BTC-CNW-BSL-C-Rly 4
    Alarm Chain Re-setting
    Indicator
    will
    identify
    the coach.
    Alarm Chain Re-setting
    Pull down
    Alarm chain
    in
    Lower direction
    ISOLATION OF ALARM CHAIN DEVICE
    PEAV Isolation cock

    In case resetting could not be done from


    chain pulling device.

    Isolate the PEAV from Isolating cock.

    It will be located last End of a Coach

    BP pressure will get restore


    immediately .

    BTC-CNW-BSL-C-Rly 7
    Alarm Chain Re-setting
    • After pulling alarm
    Alarm Chain pulling Device
    chain device BP
    pressure will exhaust
    from PEV.
    • Indicator will glow to
    identify the coach.
    • For resetting it put the
    special key in slot and Key slot

    rotate clockwise.

    BTC-CNW-BSL-C-Rly 9
    Types of ACP Devices in LHB Coaches

    BTC-CNW-BSL-C-Rly 10
    ALARM CHAIN PULLING PROCESS

    NORMAL POSITION CHAIN PULLING PROCESS

    BTC-CNW-BSL-C-Rly 11
    ACP LED INDICATOR OUTSIDE THE COACHES

    ACP Indicator ACP Indicator

    BTC-CNW-BSL-C-Rly 12
    Location of PEAV in LHB Coach

    BTC-CNW-BSL-C-Rly 13
    ALARM CHAIN RE-SETTING PROCEDURE IN BOTH DESIGNS

    Resetting Procedure Resetting Procedure

    BTC-CNW-BSL-C-Rly 14
    Identification of ACP in case of LED indication failure

    BTC-CNW-BSL-C-Rly 15
    Identification of ACP in case of LED indication failure
    ISOLATION OF ALARM CHAIN DEVICE

    In case resetting could


    not be done from chain
    pulling device.
    Isolate the PEAV from
    Isolating cock.
    It will be located near
    foot step diagonal to
    BP pressure will get
    restore immediately .
    PEAV Isolation cock

    BTC-CNW-BSL-C-Rly 17
    Location of Hissing sound from PEV in LHB Coach

    PEAV 19 mm PEAV
    Choke Isolation cock

    BTC-CNW-BSL-C-Rly 18
    DUMMING PROCEDURE OF PEAV

    • In case of failure of PEV


    Isolating cock.
    • Screw UP 18 MM
    Dummy in first design.
    • Screw UP 22 MM
    dummy in second design
    after opening the pipe
    with pipe wrench.

    You might also like