Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Leyland 804 Tractor UK Market Specifications - 1980 Model Year

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Leyland 804 Tractor UK Market Specifications - 1980 model year

Engine
Type Leyland 4/98 TT Diesel Turbocharged
Maximum power 82 hp @ 2200 rpm
Maximum torque 291.4 Nm (215 lbf ft) @ 1600 rpm
Number of Cylinders 4
Cubic Capacity 3.77 ltr
Bore / Stroke 98 / 125 mm
Compression ratio 16.8:1
Fuel pump CAV DPA
Air cleaner Dry cyclonic
Clutch
Type Dual Independent dry plate. Optional Cerametallic main plate
Diameter 11 inch. Actuation; Main, hydraulic. PTO, mechanical
Gearbox
Type Constant mesh change between ranges, full Synchromesh between gears.
4WD provided via drop box, sliding collar engagement & central drive shaft
Number of Gears 9 F & 3 R speeds provided by 3 ranges each with 3 speeds & 1 reverse gear
Rear axle
Type Spiral bevel crown wheel and pinion
Final reduction Spur gear
Differential lock Pedal operated
Hydraulics
Type Live with Position, Draught control and Auxiliary services
Draught sensing Double acting top link
Pump Twin chamber driven off front of engine
Capacity at max. Revs 6.05 galls/min each chamber, valve to give combined flow of 12.1 gall/min
Pressure 2600 psi
Lift Capacity at link ends 2358 kg (5200 lb) with assistor ram
Linkage Category ll with stabiliser bars and in-cab levelling
Auxiliary 1 single & 1 double acting spool valve, optional 2nd double acting valve
Power Take Off
Type Two speed Independent with hand and foot pedal, 6 & 21 spline stub shaft
Maximum power 70 hp @ 540 rpm
Maximum power 74 hp @ 655 rpm
Brakes
Type Hyd. actuated oil immersed discs, self equalising through balance valve
Parking Hand lever with ratchet and balance linkage operating both brakes
Electrical system
Battery 128 amp/hr
Alternator / Output Lucas 17 ACR / 36 amps
Starter Lucas M50G
Steering
Type Hydrostatic power steering
Cab
Type Explorer quiet cab with tinted glass & heater
Front axle
Type Central driven spiral bevel crown wheel to epicyclic hub reduction units
Drawbar
Type Automatic pick-up hitch and universal drawbar
Tyres
Std. Size 11.00 x 28 (6 ply) Front 14.00 x 34 (6 ply) Rear
Weight Complete with Explorer Cab 3300 kg (7276 lb)

You might also like