GFSI BENCHMARKING REQUIREMENTS VERSION 2020

PART III
REQUIREMENTS
FOR THE CONTENT
OF STANDARDS
CI Processing of Perishable
Animal Products
 The GFSI Benchmarking Requirements version 2020

PRODUCTION OF (BIO) CHEMICALS AND

K BIO-CULTURES USED AS FOOD INGREDIENTS
OR PROCESSING AIDS IN FOOD PRODUCTION

RETAIL /
WHOLESALE

FI
AI
FARMING OFF
C0 CI
PROCESSING OF
ANIMALS FOR
PERISHABLE
MEAT / MILK /
ANIMAL
EGGS / HONEY ANIMAL
PRODUCTS
PRIMARY
CONVERSION

AII CII
PROCESSING
SING OF
PERISHABLE
FARMING PLANT PRODUCTS
D OF FISH AND
SEAFOOD

CIII
PROCESSING
N
PRODUCTION
OF FEED
BI HA LE
OF PERISHABLE
ND
ANIMAL AND
CTS
PLANT PRODUCTS
(MIXED
FARMING OF
PRODUCTS)
PLANTS (OTHER
ER
THAN GRAINS
AND PULSES)

BIII CIV
PROCESSING
NG OF
BII TABLE
AMBIENT STABLE
ND
ANIMAL AND
PRE-PROCESSS PLANT PRODUCTS
HANDLING OF (MIXED
FARMING OF PLANT PRODUCTS PRODUCTS)
GRAINS AND
PULSES
E
CATERING

FII FOOD BROKER / AGENT

G PROVISION OF STORAGE AND DISTRIBUTION SERVICES

H PROVISION OF FOOD SAFETY SERVICES

I PRODUCTION OF FOOD PACKAGING

JI HYGIENIC DESIGN OF FOOD BUILDINGS AND PROCESSING EQUIPMENT

(FOR BUILDING CONSTRUCTORS AND EQUIPMENT MANUFACTURERS)

JII HYGIENIC DESIGN OF FOOD BUILDINGS AND PROCESSING EQUIPMENT (FOR BUILDING AND EQUIPMENT USERS)

2 CI - Processing of Perishable Animal Products

Part III - CI Processing
of Perishable
Animal Products
Part III of the GFSI Benchmarking Requirements in this document. The detailed content of each
defines the key elements required in a Certification individual Certification Programme must however be
Programme in relation to: independently developed and is not expected to be a
direct copy of the GFSI Benchmarking Requirements.
• Hazard and Risk Management Systems (Hazard
Analysis and Critical Control Points (HACCP) or GFSI has defined in a Glossary terms used in key
HACCP based systems); elements. Part IV, the Glossary, is an integrated
• Food Safety Management Systems; part of the GFSI Benchmarking Requirements and
• Good Industry Practices, Good Manufacturing definitions shall be applied accordingly in Certification
Practices, Good Agricultural Practices. Programmes. In the GFSI Benchmarking Requirements,
food is used as an umbrella term and refers to the
This document applies to Certification Programmes object of each of the scope, i.e. food, feed, packaging
applying for the scope of recognition CI - Processing as applicable.
of perishable animal products. This scope includes the
following product, services and activities: Certification Programmes requiring Certification
Bodies to operate according to ISO / IEC 17021 shall
• Production and packing of animal products ensure they meet the ISO 22000 requirements as
including fish and seafood, meat, eggs, dairy and well as the Benchmarking Requirements for applicable
fish products, perishable pet food from animal sectors outlined in Part III. If this was not possible, then
products only. the ISO 22000 requirements shall prevail.
• Deboning, cutting, washing, trimming, grading,
pasteurisation, cooking, curing, fermentation, Certification Programmes requiring Certification
smoking, chilling, freezing, packed in modified Bodies to operate according to ISO / IEC 17065 shall
atmosphere, packed in vacuum packing. ensure they meet the Benchmarking Requirements for
applicable sectors outlined in Part lll.
The requirements – named key elements – were
identified by a multi-stakeholder group including The Codex Alimentarius Guidelines on food hygiene
industry experts to ensure relevance to this scope and its HACCP annex constitutes an internationally-
while ensuring harmonisation of food safety standards recognised reference for food business operators
across industry. Although the structure of each scope and competent authorities to oversee food safety. As
of Part III of the Benchmarking Requirements is such, in addition to the following key elements, the
aligned, some of the key elements may be specific to Certification Programme Owner shall ensure that the
the industry included in this scope. site has knowledge and align their practices to best
industry practices and the Codex Alimentarius General
GFSI-recognised Certification Programme Owners Principles of Food Hygiene.
are required to address each key element outlined

Version 2020 3
 The GFSI Benchmarking Requirements version 2020

SECTION 1: HACCP AND RISK MANAGEMENT

SYSTEMS REQUIREMENTS

REFERENCE ELEMENT THE STANDARD SHALL REQUIRE THAT

A Hazard and Risk Management System prerequisite

programmes shall be implemented to identify and
Hazard and Risk control food safety hazards, including allergens, shall
HACCP 1.1
management system be implemented.
This system shall be systematic, comprehensive and
shall take into consideration relevant law.

This shall be a HACCP system, based on the Annex

Hazard and Risk
HACCP 1.1.2 of Codex Alimentarius General Principles of Food
management system
Hygiene.

The scope of the Hazard and Risk Management System

Hazard and Risk
HACCP 1.2 shall be defined per product / product category and /
management system
or per process or production step.

Hazard and Risk The Hazard and Risk Management System shall be
HACCP 1.3
management system applicable to the site’s scope of certification.

The Hazard and Risk Management System shall be

Hazard and Risk
HACCP 1.4 reviewed regularly, and in case of any change that
management system
impacts food safety.

4 CI - Processing of Perishable Animal Products

SECTION 2: FOOD SAFETY MANAGEMENT
SYSTEMS REQUIREMENTS

REFERENCE ELEMENT THE STANDARD SHALL REQUIRE THAT

A clear organisational structure identifying the job

Management functions and responsibilities of at least those employees
FSM 1
responsibility whose activities affect food safety shall be established,
implemented and maintained.

Evidence of the senior management’s commitment

to establish, implement, maintain and continuously
Management improve the Food Safety Management System shall
FSM 2 commitment and be provided. This shall include elements of food safety
food safety culture culture, at a minimum consisting of: communication,
training, feedback from employees and performance
measurement on food safety related activities.

The senior management shall review all elements of the

Food Safety Management System, including the Hazard
and Risk Management System HACCP plan or HACCP-
FSM 3 Management review
based plans regularly, and in case of any change that
impacts food safety, to ensure their continuing suitability
and effectiveness.

Procedures shall be established, implemented and

FSM 4.1 Food safety legislation maintained to ensure compliance with applicable legis-
lation (both countries of production and intended sale).

The elements of the Food Safety Management System

Food Safety shall be established, implemented, maintained and con-
FSM 5
Management system tinuously improved and shall have a scope appropriate
to the range of business activities to be covered.

A clear, concise and documented food safety policy

Food safety policy statement shall be in place, as well as measurable
FSM 6
and objectives objectives specifying the extent of the organisation’s
commitment to meet the food safety needs.

A food defence threat assessment procedure shall be

FSM 7.1 Food defence established, implemented and maintained to identify
potential threats and prioritise food defence measures.

A documented food defence plan shall be in place spec-

FSM 7.2 Food defence ifying the measures implemented to mitigate the public
health risks from any identified food defence threats.

Version 2020 5
 The GFSI Benchmarking Requirements version 2020

This food defence plan shall be supported by the Food

FSM 7.3 Food defence
Safety Management System.

A food fraud vulnerability assessment procedure

shall be established, implemented and maintained to
FSM 8.1 Food fraud
identify potential vulnerability and prioritise food fraud
mitigation measures.

A documented food fraud plan shall be in place specifying

FSM 8.2 Food fraud the measures implemented to mitigate the public health
risks from the identified food fraud vulnerabilities.

This food fraud mitigation plan shall be supported by the

FSM 8.3 Food fraud
organisation's Food Safety Management System.

A procedure shall be established, implemented

and maintained for the management and control of
Documentation
FSM 9.1 documented information required to demonstrate the
requirements
effective operation and control of processes and the
Food Safety Management System.

All the above-mentioned documented information

shall be securely stored for the time period required to
Documentation meet customer and legal requirements, or for a period
FSM 9.2.1
requirements exceeding the shelf-life of the food if customer or legal
requirements are not available. It shall be effectively
controlled and readily accessible when needed.

Specified requirements or specifications shall be

Specified requirements established, implemented and maintained for all inputs
FSM 10.1
/ Specifications to the process, including services that are purchased or
provided and have an effect on food safety.

Specified requirements A review process of the specified requirements or

FSM 10.2
/ Specifications specifications shall be in place.

Effective procedures and instructions shall be established,

FSM 11 Procedures implemented and maintained for all processes and
operations having an effect on food safety.

The resources needed to establish, implement, maintain,

FSM 12 Resource management review and improve the Food Safety Management
System shall be identified and assigned.

6 CI - Processing of Perishable Animal Products

 A purchasing procedure shall be established, imple-
mented and maintained to ensure that all inputs to the
Purchasing and process, including externally purchased materials and
FSM 13.1.2
supplier performance services which have an effect on food safety, conform to
specified requirements or specifications as well as food
safety and regulatory requirements.

A procedure for the evaluation, approval and continued

monitoring of suppliers which have an effect on food
safety shall be established, implemented and maintained.
Purchasing and The procedure shall address procurement in emergency
FSM 13.2.1
supplier performance situations to ensure that food still conforms to the docu-
mented specified requirements or specifications, and the
supplier has been evaluated. The results of evaluations,
investigations and follow up actions shall be recorded.

Outsourced processes that may have an effect on food

Purchasing and safety shall be identified and controlled.
FSM 13.3
supplier performance Such controls shall be documented in the Food Safety
Management System.

Procedures shall be established, implemented and main-

tained to ensure product identification from the supplier
FSM 14.1.1 Traceability
(minimum one step back) through any processes undertak-
en to the recipient of the food (minimum one step forward).

Documented tests of the traceability system shall be

FSM 14.2 Traceability
undertaken to ensure this is operating effectively.

Product design and development procedure shall be

established, implemented and maintained for new
FSM 15 Product development
products and changes to product or manufacturing pro-
cesses to ensure safe and legal products are produced.

An allergen management plan shall be established,

implemented and maintained. This shall include a risk
assessment of allergen cross contamination, implement-
FSM 16.1 Allergen management
ed controls to reduce or eliminate that risk, and labelling
of the food in compliance with the allergen labelling
legislation in the country of intended sale.

Control of measuring
The equipment / devices used to measure parameters
FSM 17.1 and monitoring
critical to ensure food safety shall be identified.
equipment / devices

Control of measuring The identified equipment / devices shall be regularly

FSM 17.2 and monitoring calibrated; calibration shall be traceable to a national or
equipment / devices international standard or method.

Version 2020 7
 The GFSI Benchmarking Requirements version 2020

Finished product shall be labelled to ensure safe use

Product labelling and
FSM 18.1.1 of food, in compliance with the applicable food safety
product information
legislation in the country of intended sale.

When product is unlabelled, all relevant product

Product labelling and
FSM 18.2 information shall be made available to ensure the safe
product information
use of the food by the customer or consumer.

A procedure shall be established, implemented and main-

tained to ensure that analyses of food parameters critical
to food safety are undertaken by competent laboratories
FSM 19.1 Testing
and using appropriate sampling and testing methods
and that such analyses are performed in accordance with
the applicable requirements of ISO/IEC 17025.

A risk-based approach shall be in place to define the

Environmental microbiological environmental monitoring programme
FSM 19.2
monitoring which shall be established, implemented and maintained
to reduce the risk of food contamination.

An internal audit procedure shall be established,

FSM 20 Internal audit implemented and maintained; it shall cover all elements
of the Food Safety Management System.

A procedure for the management of complaints and

complaint data shall be established, implemented and
FSM 21 Complaint handling
maintained to ensure that complaints are assessed and
corrective actions implemented, when necessary.

An incident management procedure, including product

Serious incident recall and withdrawal, shall be established, implemented
FSM 22
management and maintained. The recall procedure shall be regularly
tested for effectiveness.

A product release procedure shall be established,

FSM 23 Product release
implemented and maintained.

A procedure shall be established, implemented and

maintained to ensure that any non-conformity impact-
Control of non-
FSM 24.1 ing food safety and any non-conforming products are
conformity
clearly identified and controlled to prevent unintended
use or delivery.

A procedure shall be established, implemented and

maintained for the determination and implementation
FSM 25 Corrective actions
of corrective actions in the event of any significant non-
conformity relating to food safety.

8 CI - Processing of Perishable Animal Products

SECTION 3: GOOD INDUSTRY
PRACTICE REQUIREMENTS

REFERENCE ELEMENT THE STANDARD SHALL REQUIRE THAT

The site shall be located and maintained to enable the

GMP 1 Site environment reception, storage, production and distribution of safe
food and to prevent its contamination.

All grounds within the site shall be maintained to

GMP 2 Local environment prevent contamination and enable the production of
safe products.

The site, both the exterior and the interior, shall be

designed, constructed and maintained to minimise food
Site design, construction,
safety risks.
GMP 3 layout and flow
The layout and flow of operations shall be suitable for
of operations
the intended purpose and designed to minimise food
safety risks.

Procedures shall be established, implemented and

maintained to prevent or minimise risk of contamination
Product contamination
GMP 4.1 and cross-contamination of purchased materials, work
risk and segregation
in progress, rework, packaging and finished product
covering all aspects of food safety.

Employee facilities including hand washing and toilet

facilities, and public facilities where applicable, shall
GMP 5 Employee facilities
be provided, designed and operated to minimise food
safety risks.

Personal hygiene, Documented personal hygiene standards shall be

GMP 6.1 protective clothing and established, implemented and maintained to minimise
medical screening food safety risks.

Personal hygiene,
Suitable protective clothing shall be provided to
GMP 6.2 protective clothing and
minimise food safety risks.
medical screening

A medical screening procedure shall be established,

Personal hygiene, implemented and maintained to identify conditions
GMP 6.3 protective clothing and impacting food safety and that any person affected shall
medical screening immediately report illness or symptoms to management,
subject to legal restrictions in the country of operation.

Version 2020 9
 The GFSI Benchmarking Requirements version 2020

Personal hygiene, The requirements 6.1, 6.2, and 6.3 shall apply to
GMP 6.4 protective clothing and employees, contractors and visitors commensurate to
medical screening their impact on food safety.

Procedure shall be established, implemented and

maintained to ensure that all employees are trained, and
GMP 7 Training
retrained as necessary to have an understanding in food
safety, commensurate with their activity.

Procedure of housekeeping, cleaning and disinfection

shall be established, implemented and maintained. Its
Housekeeping, cleaning effectiveness in minimising food safety risks shall be
GMP 8.1.1
and disinfection verified, based on the risks associated with the product
or activity.
Cleaning activities shall not represent a food safety risk.

Cleaning facilities, equipment and chemical materials

Housekeeping, cleaning
GMP 8.2 shall be suitable for their intended use and shall be
and disinfection
stored and used appropriately.

Rework shall be managed to minimise food safety risks

GMP 9 Rework
and not to compromise traceability.

A programme of site inspections / checks shall be

established, implemented and maintained to ensure
GMP 10 Site inspections / checks the site environment and processing equipment are
maintained in a suitable condition to ensure food safety,
as applicable to the activity of the site.

Air, compressed gases, and water (including ice and

steam) in any form which could impact food safety shall
be regularly monitored, and adequately stored and
GMP 11 Air and water quality
handled in order to minimise food safety risks.
Water not intended for use in food production, if available
on site, shall be managed to minimise food safety risks.

A procedure shall be established, implemented and

GMP 12.1 Waste management maintained for the collection, storage and disposal of
waste material, including waste water and drainage.

A procedure shall be established, implemented and

GMP 13 Pest control maintained to prevent, monitor and control or eliminate
the risk of pest infestation at the site.

10 CI - Processing of Perishable Animal Products

 Appropriate procedures for the reception of purchased
Reception of materials shall be established, implemented and
GMP 14
purchased materials maintained to assure that only materials that meet food
safety requirements are accepted.

All containers and vehicles used for transportation in

a way that could impact food safety shall be designed,
GMP 15 Transport
constructed and maintained to minimise food safety
risks. They shall be suitable for the intended purpose.

Food shall be held or stored in designated areas and

GMP 16.1 Storage handled under controlled conditions to minimise food
safety risks.

A procedure shall be established, implemented and

maintained to ensure that purchased materials, work in
GMP 17 Stock management
progress and finished products are used in the correct
order, and within the allocated shelf life when applicable.

Equipment shall be suitable for the intended purpose.

GMP 18 Equipment Equipment shall be designed, constructed, maintained,
used and stored to minimise food safety risks.

Effective planned maintenance shall be in place for the

site and equipment to minimise food safety risks.
GMP 19 Maintenance
Maintenance activities shall not represent food safety
risks.

Version 2020 11