Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Patio: Installation Instructions Wall Hung Toilet P-Trap (8") K-18131IN-S Before You Begin

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PATIO

INSTALLATION INSTRUCTIONS
WALL HUNG TOILET P-TRAP (8")
K-18131IN-S

BEFORE YOU BEGIN


WARNING: Risk of personal injury or product damage. Handle with care.
Vitreous China can break or chip if the bolts and nuts are over-tightened, or if the product is handled carelessly.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for any damage.
If the In-wall tank is not installed, refer to the manufacturer's instructions before installation.
ORDERING INFORMATION
Patio Wall-hung Toilet.........................K-18131IN-S*
Includes Bowl...............................K-4187IN-WD*
Includes Quiet Close Toilet Seat.........K-10614IN*
*Available in “-0(White)” & “-96(Biscuit)”
RECOMMENDED TANKS
Description In-w all Tank Cover/Face Plate
Hydro Tower 310 In-Wall tank 3/6 L K-4178IN-2-NA
K-4177IN-2**
Hydro Tower 310 In-Wall tank 3/4.5 L K-4179IN-2-NA
K-8857IN-2**
Hydro Tower 310 In-Wall tank 3/6 L Side Inlet K-4178IN-2S-NA **indicates finishes "-CP","MS1","-B04" & "-B07"
Hydro Tower 310 In-Wall tank 3/4.5 L Side Inlet K-4179IN-2S-NA

KOHLER RECOMMENDED SUPPORTS*** FOR TOILET INSTALLATION


SKU Description M12 Rack Bolt M16 Rack Bolt Wall Bracket M12 Chair Bracket In Wall Tank frame
1213309-0 1223947-0 1224238-0 1225108-0 97504IN-NA
SKU Code 1213309-1CP-0 1223947-1CP-0
1213309-1BLM-0 1223947-1BLM-0

ROUGHING-IN
3/4"
P Trap
(2 cm) Units : Inches (cm)
2"
2-3/16"
(5.5 cm)
(5 cm) RECOMMENDED TOOLS AND MATERIALS

4"
13-25/32" (10.2 cm) 15-3/4" Measuring Tape Teflon Tape Silicon Sealant File
(35 cm)
(40 cm)
12-3/16"
(31 cm)
8-1/4" 3/4"
(21 cm) (2 cm)

Hacksaw Spirit Level 10” Adjustable Wrench

16-15/16"
(43 cm)
NOTES:
· Fixture dimensions are nominal and conform to tolerances as per ASME Standard A112. 19.2M.
· Product illustrations shown are representative only; actual products may vary.
6-1/8" 11-1/32"
7-3/32" (28 cm)
14-7/32"
(36.1 cm) (18 cm) (15.6 cm) · Kohler reserves the right to make changes in product characteristics, packaging or availability at
any time without notice.
CAUTION : Do not use white cement or high lime-content cement to install this toilet.
13-31/32"
(35.5 cm) The expansion of cement due to rise in temperature may cause the toilet to crack or
21-1/16"
(53.5 cm)
be damaged. Kohler is not responsible for any damage due to installation with the use
of cement.

1161438-IN01-D
INSTALLATION GUIDELINE
1 Cut bolts if needed. File bolt ends. 2 Remove Inlet Plug.
Inds
3 Slide the gaskets on the Inlet & Outlet pipe 4
as shown.
Slide the inlet pipe into the wall openings
at water inlet to test the fitment of inlet pipe
Inds

with toilet.

80 MM

Inlet Plug

5 Note the distance between the wall & the


toilet at the location shown. 6 Remove the toilet. Cut & file the inlet pipe
to proper length by removing excess 7 Slide the outlet pipe into the wall openings
at waste outlet to test the fitment of outlet
8 Note the distance between the wall & the
toilet at the location shown.
Measure excess length “A” on the inlet pipe. length “A”. pipe with toilet. Measure excess length “B” of the outlet pipe.
Outlet
Inlet

9 Remove the toilet. Cut & file the outlet pipe


to proper length by removing excess 10 Add silicon sealant in the gasket grooves. 11 Mount the toilet on the projected studs. 12 Level the toilet with Spirit level.
length “B”.

13 Insert rubber, washer & fixing nut for Flush the toilet. Check for leaks. Recommended Installation Parts:
securing the toilet with the wall. Cut the 14 Seal connections if required. 15 Seal around the edges. Do not
use cement.
extra length of the stud projecting out.
Place the plastic caps.
1169504 1169507 1169522
Inlet Connection***
Washer
Plastic cap

1169520 1046327-S
Nut
1046327 (includes 1169520)
Rubber insert
Outlet Connection***
Recommended supports*** for Toilet installation : *** Installation parts shown aren’t supplied with
the product, to be procured separately.

Note: Dimension A & B (as represented in


pictures 6 to 10 above) to be adjusted as per
specific site requirements.

M12
{ 1213309-0/
1213309-1CP-0/
1213309-1BLM-0/ 1224238-0
Toll Free 1800 103 2244
1223947-0/
1223947-1CP-0/
1223947-1BLM-0 { M16 1225108-0
97504IN-NA kohler.co.in
1161438-IN01-D -2- © 2006 Kohler Co.

You might also like