MAHARASHTRA POLLUTION CONTROL BOARD

Tel: 0231 -2652952 Udyog Bhavan Building ,

Fax: 0231 - 2660448 Near Collectarate Office,
Website: http://mpcb.gov.in Kolhapur-416 002
Email:
srokolhapur@mpcb.gov.in

GREEN/S.S.I (G15) Date: 19/03/2023

No:- Format1.0/SRO/UAN
No.0000163857/CE/2303001409
To,
Vineet Tex Fab
Plot No -T 57 and T 61,Unit No -2,,Kagal-
Hatkanangale Five Star MIDC Area.Talandage
Tal-Hatkanangale,Dist-Kolhapur Your Service is Our Duty

Sub: Consent to Establish under Green Category.

Ref: Application for Consent to Establish vide UAN No.MPCB-

CONSENT-0000163857

Your application No.MPCB-CONSENT-0000163857 Dated 01.03.2023

For: Grant of Consent to Establish under Section 25 of the Water (Prevention & Control of
Pollution) Act, 1974 & under Section 21 of the Air (Prevention & Control of Pollution) Act,
1981 and Authorization under Rule 6 of the Hazardous & Other Wastes (Management &
Transboundary Movement) Rules 2016 is considered and the consent is hereby granted
subject to the following terms and conditions and as detailed in the schedule I, II, III & IV
annexed to this order:

1. The consent to establish is granted for a period up to commissioning of the

unit or up to 5 year whichever is earlier.
2. The capital investment of the project is Rs.4.8 Crs. (As per C.A Certificate
submitted by industry )
3. Consent is valid for the manufacture of:
Sr Maximum
Product UOM
No Quantity
Products
1 Cotton & Synthetic Fabrics 1200000 Mtrs/M
(Only weaving without textile processing i.e. Sizing, Bleaching, Dying etc. and any
types of chemicals use.)
4. Conditions under Water (P&CP), 1974 Act for discharge of effluent:
Sr Permitted (in
Description Standards to Disposal Path
No CMD)
1. Trade effluent 0 As per Schedule-I Not Applicable
2. Domestic effluent 0.40 As per Schedule-I On land for gardening
5. Conditions under Air (P& CP) Act, 1981 for air emissions:
Description of stack / Number of Standards to be
Sr No. Stack No.
source Stack achieved
NA
Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)
Page 1 of 7
/QMS.PO6_F01/00
 6. Non-Hazardous Wastes:
Sr No Type of Waste Quantity UoM Treatment Disposal
1 Waste Cloth 550 Kg NA Sell
7. Conditions under Hazardous & Other Wastes (M & T M) Rules 2016 for
treatment and disposal of hazardous waste:
Sr No Category No./ Type Quantity UoM Treatment Disposal
NA

8. The Board reserves the right to review, amend, suspend, revoke this consent and the
same shall be binding on the industry.
9. This consent should not be construed as exemption from obtaining necessary NOC/
permission from any other Government authorities.
10. The applicant shall obtain Consent to Operate from Maharashtra Pollution Control
Board before actual commencement of the Unit/Activity. (Establish)

Received Consent fee of -

Sr.No Amount(Rs.) Transaction/DR.No. Date Transaction Type
1 15000.00 TXN2303001680 11/03/2023 Online Payment
Copy to:
1. Regional Officer, MPCB, Kolhapur
2. Chief Accounts Officer, MPCB,Sion, Mumbai

Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)

Page 2 of 7
/QMS.PO6_F01/00
 SCHEDULE-I
Terms & conditions for compliance of Water Pollution Control:
1. A] Generation - As per your application the treated effluent generation is Nil.
B] Treatment - NA
C] Disposal - NA
2. A] As per your application, you have provided Septic Tank followed by Soak pit for
the treatment of 0.40 CMD of sewage.

B] The Applicant shall operate the sewage treatment system to treat the sewage so
as to achieve the following standards.

Sr.No Parameters Standards (mg/l)

1 Suspended Solids Not to exceed 100
2 BOD 3 days 27oC Not to exceed 100

C] The treated sewage shall be recycled for secondary purposes to the maximum
extent and remaining shall be discharged on land for gardening within premise
after confirming above standards. In no case, sewage shall find its way for
gardening / outside factory premises.
3. The Board reserves its rights to review plans, specifications or other data relating to
plant setup for the treatment of waterworks for the purification there of & the system
for the disposal of sewage or trade effluent or in connection with the grant of any
consent conditions. The Applicant shall obtain prior consent of the Board to take steps
to establish the unit or establish any treatment and disposal system or an extension or
addition thereto.
4. The industry shall ensure replacement of pollution control system or its parts after
expiry of its expected life as defined by manufacturer so as to ensure the compliance
of standards and safety of the operation thereof.
5. The Applicant shall comply with the provisions of the Water (Prevention & Control of
Pollution) Act, 1974 and as amended, by installing water meters and other provisions
as contained in the said act:
Water consumption quantity
Sr. No. Purpose for water consumed
(CMD)
Industrial Cooling, spraying in mine pits
1. 0.00
or boiler feed
2. Domestic purpose 0.50
Processing whereby water gets polluted
3. 0.00
& pollutants are easily biodegradable
Processing whereby water gets polluted
4. & pollutants are not easily 0.00
biodegradable and are toxic
5. Gardening 0

6. The Applicant shall provide Specific Water Pollution control system as per the
conditions of EP Act, 1986 and rule made there under from time to time/
Environmental Clearance/ CREP guidelines.

Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)

Page 3 of 7
/QMS.PO6_F01/00
 SCHEDULE-II
Terms & conditions for compliance of Air Pollution Control:
Not Applicable
SCHEDULE-III
Details of Bank Guarantees:
Consent
Sr.
(C2E/ Amt of BG Submission Purpose of Compliance Validity
No
C2O Imposed Period BG Period Date
.
/C2R)
NA

BG Forfeiture History
Amount of Amount of Reason of
Consent Submission Purpose
Srno. BG BG BG
(C2E/C2O/C2R) Period of BG
imposed Forfeiture Forfeiture
NA
BG Return details
Srno. Consent (C2E/C2O/C2R) BG imposed Purpose of BG Amount of BG Returned
NA

Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)

Page 4 of 7
/QMS.PO6_F01/00
 SCHEDULE-IV
General Conditions:
1. The Energy source for lighting purpose shall preferably be LED based
2. The PP shall harvest rainwater from roof tops of the buildings and storm water drains to
recharge the ground water and utilize the same for different industrial applications within
the plant
3. Conditions for D.G. Set
a) Noise from the D.G. Set should be controlled by providing an acoustic enclosure or by
treating the room acoustically.
b) Industry should provide acoustic enclosure for control of noise. The acoustic enclosure/
acoustic treatment of the room should be designed for minimum 25 dB (A) insertion loss
or for meeting the ambient noise standards, whichever is on higher side. A suitable
exhaust muffler with insertion loss of 25 dB (A) shall also be provided. The measurement
of insertion loss will be done at different points at 0.5 meters from acoustic
enclosure/room and then average.
c) Industry should make efforts to bring down noise level due to DG set, outside industrial
premises, within ambient noise requirements by proper sitting and control measures.
d) Installation of DG Set must be strictly in compliance with recommendations of DG Set
manufacturer.
e) A proper routine and preventive maintenance procedure for DG set should be set and
followed in consultation with the DG manufacturer which would help to prevent noise
levels of DG set from deteriorating with use.
f) D.G. Set shall be operated only in case of power failure.
g) The applicant should not cause any nuisance in the surrounding area due to operation of
D.G. Set.
h) The applicant shall comply with the notification of MoEFCC, India on Environment
(Protection) second Amendment Rules vide GSR 371(E) dated 17.05.2002 and its
amendments regarding noise limit for generator sets run with diesel.
4. The applicant shall maintain good housekeeping.
5. The non-hazardous solid waste arising in the factory premises, sweepings, etc. be disposed
of scientifically so as not to cause any nuisance / pollution. The applicant shall take
necessary permissions from civic authorities for disposal of solid waste.
6. The applicant shall not change or alter the quantity, quality, the rate of discharge,
temperature or the mode of the effluent/emissions or hazardous wastes or control
equipments provided for without previous written permission of the Board. The industry will
not carry out any activity, for which this consent has not been granted/without prior consent
of the Board.
7. The Board reserves the right to review, amend, suspend, revoke this consent and the same
shall be binding upon you.
8. The industry shall submit quarterly statement in respect of industries obligation towards
consent and pollution control compliance's duly supported with documentary evidences
(format can downloaded from MPCB official site).
9. The industry shall submit official e-mail address and any change will be duly informed to the
MPCB.
10. The industry shall achieve the National Ambient Air Quality standards prescribed vide
Government of India, Notification No. B-29016/20/90/PCI-L dated. 18.11.2009 as amended.
11. This consent should not be construed as exemption from obtaining necessary NOC/
permission from any other Government authorities.
12. The industry shall ensure replacement of pollution control system or its parts after expiry of
its expected life as defined by manufacturer so as to ensure the compliance of standards
and safety of the operation thereof.

Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)

Page 5 of 7
/QMS.PO6_F01/00
 13. You shall operate OCEMS installed for source emission round 'O' clock and transmit data
online to CPCB and MPCB server. You shall also monitor effluent quality, stack emissions and
ambient air quality monthly/quarterly. You shall conduct Dioxin Furan monitoring by third
party NABL Accredited agency once in year and submit report to Sub Regional Officer.
14. You shall ensure collection, and segregation of BMW regularly to treat and dispose Off within
48 hrs from generation.
15. Whenever due to any accident or other unforeseen act or even, such emissions occur or is
apprehended to occur in excess of standards laid down, such information shall be forthwith
Reported to Board, concerned Police Station, office of Directorate of Health Services,
Department of Explosives, Inspectorate of Factories and Local Body. In case of failure of
pollution control equipments, the production process connected to it shall be stopped.
16. The applicant shall provide an alternate electric power source sufficient to operate all
pollution control facilities installed to maintain compliance with the terms and conditions of
the consent. In the absence, the applicant shall stop, reduce or otherwise, control
production to abide by terms and conditions of this consent.
17. The industry shall recycle/reprocess/reuse/recover Hazardous Waste as per the provision
contain in the Hazardous and Other Wastes (M & TM) Rules 2016, which can be recycled
/processed /reused /recovered and only waste which has to be incinerated shall go to
incineration and waste which can be used for land filling and cannot be
recycled/reprocessed etc. should go for that purpose, in order to reduce load on incineration
and landfill site/environment.
18. An inspection book shall be opened and made available to the Board’s officers during their
visit to the applicant.
19. You shall not Rent, Lend, Sell, Transfer or Close Down the facility or otherwise transport the
Bio Medical waste for any other purpose without obtaining prior written permission of the
MPC Board.
20. Separate drainage system shall be provided for collection of trade and sewage effluents.
Terminal manholes shall be provided at the end of the collection system with arrangement
for measuring the flow. No effluent shall be admitted in the pipes/sewers downstream of the
terminal manholes. No effluent shall find its way other than in designed and provided
collection system.
21. Neither storm water nor discharge from other premises shall be allowed to mix with the
effluents from the factory.
22. The industry should not cause any nuisance in surrounding area.
23. The industry shall take adequate measures for control of noise levels from its own sources
within the premises so as to maintain ambient air quality standard in respect of noise to less
than 75 dB (A) during day time and 70 dB (A) during night time. Day time is reckoned in
between 6 a.m. and 10 p.m. and night time is reckoned between 10 p.m. and 6 a.m.
24. You shall ensure that fugitive emissions from the activity are controlled so as to maintain
clean and safe environment in and around the facility premises.
25. The applicant shall provide ports in the chimney/(s) and facilities such as ladder, platform
etc. for monitoring the air emissions and the same shall be open for inspection to/and for
use of the Board’s Staff. The chimney(s) vents attached to various sources of emission shall
be designated by numbers such as S-1, S-2, etc. and these shall be painted/ displayed to
facilitate identification.
26. The Board reserves its rights to review plans, specifications or other data relating to plant
setup for the treatment of waterworks for the purification thereof & the system for the
disposal of sewage or trade effluent or in connection with the grant of any consent
conditions. The Applicant shall obtain prior consent of the Board to take steps to establish
the unit or establish any treatment and disposal system or an extension or addition thereto
27. The applicant shall install a separate meter showing the consumption of energy for
operation of domestic and industrial effluent treatment plants and air pollution control
system. A register showing consumption of chemicals used for treatment shall be
maintained.

Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)

Page 6 of 7
/QMS.PO6_F01/00
 28. The applicant shall bring minimum 33% of the available open land under green coverage/
plantation. The applicant shall submit a yearly statement by 30th September every year on
available open plot area, number of trees surviving as on 31st March of the year and
number of trees planted by September end.
29. The Board reserves its rights to review plans, specifications or other data relating to plant
setup for the treatment of waterworks for the purification thereof & the system for the
disposal of sewage or trade effluent or in connection with the grant of any consent
conditions.
30. The firm shall submit to this office, the 30th day of September every year, the Environment
Statement Report for the financial year ending 31st March in the prescribed FORM-V as per
the provisions of Rule 14 of the Environment (Protection) (second Amendment) Rules, 1992.
31. You should monitor effluent quality, stack emissions and ambient air quality
monthly/quarterly. You shall conduct Dioxin Furan monitoring by third party NABL
Accredited agency once in every year and submit report to Sub Regional Officer.
32. The Board reserves its rights to vary all or any of the condition in the consent, if due to any
technological improvement or otherwise such variation (including the change of any control
equipment, other in whole or in part is necessary).
33. The applicant shall provide facility for collection of environmental samples and samples of
trade and sewage effluents, air emissions and hazardous waste to the Board staff at the
terminal or designated points and shall pay to the Board for the services rendered in this
behalf.
34. You shall obtain necessary prior permission for providing additional control equipment with
necessary specifications and operation thereof or alteration or shall ensure replacement of
pollution control system or its parts after expiry of its expected life as defined by
manufacturer so as to ensure the compliance of standards and safety of the operation
thereof.
35. You shall strictly comply with the Water (P&CP) Act, 1974, Air (P&CP) Act, 1981 and
Environmental Protection Act, 1986 and industry specific standard under EP Rules 1986
which are available on MPCB website (www.mpcb.gov.in).
36. You shall create the Environmental Cell by appointing an Environmental Engineer and
Chemist for looking after day-to-day activities related to compliance of CCA.
37. You should comply with the Hazardous and Other Wastes (M & TM) Rules, 2016 , Bio Medical
Waste Management Rules,2016 and submit the Annual Returns as per Rule 6(5) & 20(2) of
Hazardous and Other Wastes (M & TM) Rules, 2016 for the preceding year in Form-IV by
30th June of every year
38. You should comply with the Hazardous and Other Wastes (M & TM) Rules, 2016 , Bio Medical
Waste Management Rules,2016 and submit the Annual Returns as per Rule 6(5) & 20(2) of
Hazardous and Other Wastes (M & TM) Rules, 2016 for the preceding year in Form-IV by
30th June of every year

This certificate is digitally & electronically signed.

Vineet Tex Fab/CE/UAN No.MPCB-CONSENT-0000163857/Indus-Id.205718 (19-03-2023 10:58:16 pm)

Page 7 of 7
/QMS.PO6_F01/00