Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

African Longfinned Tetra

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

AFRICAN LONGFINNED TETRA , Brycinus longipinnis

By Chase Klinesteker SWAM, March/April, 1991

Male African Longfinned Tetra, Photo by Darrell Ullisch

DESCRIPTION
The African Longfinned Tetra, Brycinus longipinnis, is an active schooling fish related to the Congo Tetra. It has
silvery sides and large scales with a subtle blue-green coloration. The eye is red, and the most prominent
marking is a heavy horizontal black line on the side of the body from about ¾ back to the base of the tail.
There also is a yellowish cast in the coloration, depending on the light angle and conditions. The dorsal fin of
the male can be extremely long and flowing, often extending beyond the tail. Although it is not often seen in
shops, the high activity, long flowing dorsal, attractive coloration, and peaceful nature make this fish very
desirable in a community aquarium.

The Longfinned Tetra is from tropical West Africa and was first introduced to the hobby in 1928. Soft, slightly
acid water is usually recommended, but not a necessity. It is large for a tetra, attaining about 4 ½ inches,
although I have not seen them that large. Growth is fairly slow, and I suspect that it is a fairly long-lived fish.
Water quality is important, as it is sensitive to nitrates, possibly even more so than its cousin, the Congo Tetra.
Once in an established aquarium, there doesn’t seem to be a problem, but I have found that they ship poorly
unless there is plenty of room per fish in the bag. Their higher activity level probably consumes more oxygen
than normal, and may be one reason they are not frequently imported. Because of their size and constant
swimming, I would recommend a 30 gallon or larger tank for them with lots of open space. Clean, well
oxygenated water and regular water changes are important. Several authors have recommended peat
filtration, although I have not found that to be necessary. I suspect their natural habitat to be fast flowing
rivers because of their streamlined body and constant swimming. 75 to 78 degrees seems to be a good
temperature for them.

FEEDING
Brycinnus longipinnis swims in midwater and feeds mainly at the surface. Some cover or floating plants can be
helpful as it can be timid or easily frightened, especially in smaller groups. They will eat just about any food,
including dry food, frozen brine shrimp, daphnia, white worms, frozen beef liver, and beef heart. Some
imported fish have been finicky about eating for me at first, but once they became adjusted, they did fine.
Water quality seems to affect their appetite somewhat also. They can be extremely heavy eaters and seem to
do best on a variety of high protein foods.
SHARE BREEDING INFORMATION
Most references I found stated that the African Longfinned Tetra had not been bred in captivity. Two sources
from Europe, however, did refer to an occasional spawning but gave few details. If this fish has been bred at
least a few times in the last 60 years since its introduction, I am disappointed that no information has been
recorded in the reference literature. Perhaps the breeders felt the information unimportant, or did not wish
to write an article, or even felt the “secret” might get them a few extra dollars when they sold the fry. I do not
know the status of the African Longfinned Tetra in the wild, but the natural habitats of many fish we keep in
the hobby are threatened by environmental damage or political unrest. If we do not share or publish the
information on breeding difficult fish, they may become extinct or unavailable to the hobby. Whenever I see
in reference books: “This species has been bred, but no details available”, I wonder why. We are very
fortunate in the Kalamazoo-Detroit area. SWAMAS has a very strong BAP program and a number of our
presentations have been given by professional breeders very willing to share their knowledge.

SPAWNING
Darrell Ullisch gave me a pair of Brycinus longipinnis about a year and a half ago and I obtained 3 more
specimens after that. Sexing adults is not difficult. The male is slightly larger, has the long dorsal fin
extension, and has a convex anal fin. The females’ anal fin is concave on the bottom edge. With 2 males and 3
females, I set out to try and condition them for spawning and get the females to fill with eggs. For the first
few months they ate little and were concave in the belly area, probably a result of adjusting from the wild.
Gradually they began eating more and more, but I could not get the females to fill with eggs. Finally, after
feeding 2 to 3 times per day with beef liver, white worms, and frozen brine shrimp, I got one female to show a
slight convexity, but certainly not a plumpness. The pair was about 2 ½ inches, so I set up a bare 10 gallon
tank with fresh softened water (Culligan) and plastic plants in a dimly lit area with a temperature of about 75
degrees. The filter was a foam filter under gravel in a pan. After aging the water about 12 hours and knocking
the bubbles off the plants, I introduced the pair of African Longfinned Tetras. For 3 days there was no activity
and the fish hid in the plants. The fourth morning I got up and found 200 to 300 eggs scattered all over the
bottom with no attempt by the parents to eat them. The eggs are large (2mm.) and very similar to Congo
Tetra eggs. This spawning had a high fertility rate of about 80%. I removed the parents and siphoned off
about half the eggs, placing them in rainwater with methylene blue in a dimly lit container with light aeration.
The remaining eggs I left in the breeding tank and added methylene blue to control fungus, keeping the filter
going strongly. Trying different conditions for hatching eggs can tell me what the best conditions are for
hatching. In 4 days the eggs began to hatch and in 2 more days were all hatched. An excellent hatch was
obtained under both conditions. In 4-5 more days I had about 200 free-swimming fry (lest you think this was a
snap, I bred the same pair again two months later under what I thought were the same conditions, and got a
very poor hatch of only 15 fry. Such is the fickleness of breeding fish!).

FEEDING THE FRY


The fry are slender, have small mouths, and need infusoria for 2-3 days before they will take newly hatched
brine shrimp. A small amount of Liquifry 2-3 times per day was fed. The fry must constantly swim or they will
sink, so it was necessary to use a strong air flow to the filter to keep the water moving and the oxygen content
high. It also keeps the food in front of the fry continually. The slender fry have small stomachs at this point,
so use care not to overfeed and pollute the water. Once the fry are eating newly hatched brine shrimp, the
job becomes easier. Just feed them often enough, as they digest their food quickly. In about 3 weeks they
were taking finely ground dry food as well. I managed to spread the fry to other tanks quickly, and in 3
months had about 150 fry from 1 to1 ½ inches long. These fry fed quite aggressively in larger schools and will
even attack sinking pellets on the bare bottomed tank, leaving little for the catfish or other slower fish. I have
kept these fish with several other species of fish and have not noticed fin-nipping behavior at all.
SUMMARY
In Summary, the African Longfinned Tetra is a lively, peaceful, and attractive fish capable of being as popular
and available as its cousin the Congo Tetra. I highly recommend it as a fine addition to any larger community
tank. I encourage all hobbyists not to be afraid to try and breed difficult or previously unbred fish---you may
have just the right conditions to obtain success. All fish breed, it’s just that some haven’t done so in captivity.
Use common sense, clean water, and a variety of foods. Give it a try, and good luck. I may be reading your
article in the near future!

You might also like