The document summarizes the specifications of the VM 50 Vickers Hardness Tester. It can test metals from soft to medium hardness with a wide testing range from 5 to 50 kgf. The tester has a motorized loading and unloading cycle along with a built-in projection screen for accurate results. It is suitable for measuring the hardness of precision metallic parts.
The document summarizes the specifications of the VM 50 Vickers Hardness Tester. It can test metals from soft to medium hardness with a wide testing range from 5 to 50 kgf. The tester has a motorized loading and unloading cycle along with a built-in projection screen for accurate results. It is suitable for measuring the hardness of precision metallic parts.
The document summarizes the specifications of the VM 50 Vickers Hardness Tester. It can test metals from soft to medium hardness with a wide testing range from 5 to 50 kgf. The tester has a motorized loading and unloading cycle along with a built-in projection screen for accurate results. It is suitable for measuring the hardness of precision metallic parts.
The document summarizes the specifications of the VM 50 Vickers Hardness Tester. It can test metals from soft to medium hardness with a wide testing range from 5 to 50 kgf. The tester has a motorized loading and unloading cycle along with a built-in projection screen for accurate results. It is suitable for measuring the hardness of precision metallic parts.
to get accurate Result Features : Testing range is very wide, from soft metal such as lead, upto the hardest, like hard steel. Same hardness number is obtained on the same specimen, regardless of the load applied. The indication is tiny and allows testing of a precision finished part. Loading and unloading cycle is motorized. Thin sheet metal is perfectly tested because the load applied very small. Built-in projection screen to get accurate results.
Application : 'FIE' Vickers Hardness Tester is a simple and accurate means to produce Optional - and measure the diamond indentation. Auto Turret Mechanism These testers are suitable for measuring the hardness of precision metallic for indexing indentor & parts with wide testing range - from soft to hard and their accurate results are objective from loading widely acclaimed. station to measurement station. These testers strictly confirm to IS : 1501-2 and ISO 6507-2.
Technical Specifications : For Auto Turret Machine after clicking on cycle start button Test Loads 5,10,20,30,50 kgf. indexing mechanism will operate automatically & loading mechanism starts, once loading finishes again indexing Optional Test Load 1 kgf. mechanism will positioned at measuring station. Optical Magnification 70 X Construction : Optical Measuring Range (mm) 0.1 to 1.0 The robust machine frame is designed to accommodate the high Max. Test Height (mm) 200 precision loading system and an optical projection screen. Specimen is placed on a testing table. The test cycle is fully automatic. Scale least count (mm) 0.001 The accurate load is applied on a diamond indenter by means of a Throat Depth (mm) 135 lever and weights. After a specific laps of time, the load is removed automatically. The objective is indexed with the test piece and the Machine Dimension (mm) L585 x W290 x H 860 diamond indentation is projected on the measuring screen. Weight (Approx.) 70 kg The diagonals of the indentation can be measured by means of the micrometer thimble of the projection screen. Power Supply 220 VAC, 50 Hz, 1 Phase Standard Accessories : Number of special accessories are available on request and as per special requirement. Standard Test Block 1 No. Diamond Indenter 1 No. Weights 1 Set Flat Anvil 1 No. Vee-type anvil (Small & Big) 1 No. each Spanners 1 Set Electric Cord 1 No. Halogen Lamp 1 No. Telescopic Cover 1 Set Instruction Manual 1 Book
Due to constant Research & Development, Specifications and Features are subject to change without notice.
