Untitled

EQUIPMENT FLUIDS
Oils Diesel Engine Oil

2925808
Health and Safety
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin
or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS)
before using this product. For a copy of the MSDS, visit us on the web at www.catmsds.com.
2925816
Cat® DEO™
Recommended Use
• Low-emission diesel engines including Cat® engines with ACERT® Technology.
• Heavy-duty diesel engines made by other manufacturers that recommend API CI-4
and CH-4. See “Typical Characteristics” for more information.
• Automotive gasoline engines that require API SL or SJ category oils.
See “Typical Characteristics” for more information.
• Cat earthmoving, commercial, marine and on-highway truck diesel engines, excluding
3600, C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126 MUI
Marine diesel engines with closed crankcase ventilation systems should use Cat SAEO™.
Discover the Difference
• Cat DEO is developed, tested and approved by Caterpillar to meet the same high standards
as all genuine Cat parts.
• Factory-Fill — Used as standard factory-fill for Cat machines.
• Increased Engine Life — Resists oxidation and prevents build-up of deposits on pistons
and rings.
• Extended Drain Intervals — Extends oil drain intervals while providing excellent engine
protection and performance when used in conjunction with our S•O•SSM Services oil
analysis program.
• Proven Performance — Tested thoroughly in Cat diesel engines including Cat engines
Equipment Fluids
with ACERT Technology to ensure excellent engine life and performance.

• Long-Lasting Protection — Improved soot control and enhanced shear stability
enable oil to maintain proper viscosity for longer operating periods in Cat engines with
ACERT Technology, especially those equipped with HEUI systems.
5-2
Diesel Engine Oil Oils
2925841
Cat® DEO™ (Continued)
Typical Characteristics {A}
Location Worldwide Worldwide Canada, Canada, Brazil Brazil Egypt and
Mexico and Mexico and Saudi Arabia
United States United States
SAE Viscosity SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40
Grade
API Service CI-4, CH-4 CI-4, CH-4 CI-4 PLUS, CI-4, CH-4 CI-4, CH-4 CI-4, CH-4 CI-4, CH-4
Classifications — CI-4, CH-4
Diesel
API Service SL SL SL SL SL SL SJ
Classifications —
Gasoline
ACEA E5/B3/A2/ E5
Classifications E7-08
Caterpillar ECF-2 ECF-2 ECF-2 ECF-2 ECF-2 ECF-2 ECF-2
Performance Level
Volvo Performance VDS-3 VDS-2 VDS-3 VDS-3 VDS-3 VDS-2
Level
MB Performance MB228.3 MB228.3
Level
Cummins CES CES 20071/76 CES 20071/76 CES CES CES 20071/76 CES
Performance Level 20071/72/76/77 20071/76/78 20071/72/76/77 20071/72/76/77
Mack EO-M Plus EO-M Plus, EO-NPP, EO-M EO-M Plus, EO-M Plus EO-M Plus EO-M Plus
Equipment Fluids
Performance Level EO-M EO-M
MAN Performance M3275 3275
Level
RVI Performance RLD RLD
Level
{A} The values shown are typical values and should not be used as quality control parameters to either accept or reject product.
Specifications are subject to change without notice.
5-3
2925854
Location Worldwide Worldwide Canada, Canada, Brazil Brazil Egypt and
Mexico, and Mexico, and Saudi Arabia
United States United States
Allison C4
Performance
Level
Flash Point, °C 230 222 224 220 220 222 240
(ASTM D92)
Pour Point, °C -30 -36 -30 -33 -33 -36 -33
(ASTM D97)
SAE Viscosity SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40 SAE 10W-30 SAE 15W-40
Grade
Viscosity 103 76 120.5 76 105 75 105
cSt @ 40° C
(ASTM D445)
Viscosity 14.2 11.5 15.5 11.5 14.4 11.2 14.0
cSt @ 100° C
(ASTM D445)
Viscosity Index 135 144 135 145 141 142 135
(ASTM D2270)
Sulfated Ash, % 1.3 1.3 1.3 1.3 1.1 1.1 1.2
wt. (ASTM D874)
TBN 11.3 10.4 10.4 10.4 10.6 10.6 10.3
(ASTM D2896)
Equipment Fluids
Zinc, % wt. 0.146 0.146 0.146 0.146 0.133 0.133 0.123

(ASTM D4951)
Gravity @ 16° C 29.3 31.3 30 31.7 28.7 31.5 29
API (ASTM D287)
Gravity @ 0.88 0.87 0.88 0.87 0.88 0.87 0.88
16° C Specific
English Volume Metric Volume English Volume Metric Volume

(gal) (L) Qty. Part Number 1 (gal) (L) Qty. Part Number 1
SAE 10W-30 SAE 15W-40 (Continued)
5 -- -- 3E-9709 Bulk -- -- 155-6199
55 -- -- 3E-9708 -- 1 -- 123-4077
Bulk -- -- 155-6198 -- 4 -- 3E-9902
-- 5 -- 335-9830 -- 5 -- 3E-9901
-- 18 -- 283-1709 -- 18 -- 3E-9900
-- 20 -- 3E-9844 -- 19 -- 3E-9849
-- 200 -- 130-7055 -- 20 -- 3E-9848
-- 208 -- 3E-9707 -- 60 -- 121-4038
-- 1000 -- 148-3539 -- 200 -- 3E-9842
-- 1004 -- 5P-2586 -- 205 -- 3E-9841
-- 1100 -- 384-8146 -- 208 -- 3E-9840
SAE 15W-40 -- 900 -- 381-7213
0.250 (1 Qt.) -- 4 3E-9715 -- 1000 -- 3E-9838
1 -- -- 248-7518 -- 1040 -- 201-0775
5 -- -- 3E-9713 -- 1100 -- 384-8147
55 -- -- 3E-9712 -- 2000 -- 120-5285
(Continued)
5-4
2925854
English Volume Metric Volume
(gal) (L) Qty. Part Number 1
SAE 15W-40 (Continued)
-- 10 000 -- 119-5131
-- 10 004 -- 8T-9548
1
Part numbers listed below are not available in all regions. See your Cat dealer for part numbers appropriate for your region.
2925896
Cat® DEO™ Monograde
For Cat 3600 Series Diesel Engines
Recommended Use
• Cat® DEO Monograde is recommended for use in 3600 series diesel engines operating on distillate diesel fuels.
• Cat DEO Monograde is recommended for older Cat engines equipped with precombustion fuel injection systems that
permit the use of American Petroleum Institute CD or CF oil.
• Cat DEO Monograde can be used with low-sulfur diesel fuel and protects Cat engines operating on higher sulfur diesel
fuels (3600 Series engines operating on fuel containing up to 1.30% sulfur, and precombustion engines operating on fuel
containing up to 0.065% sulfur fuel.)
• Cat DEO Monograde is developed, tested and approved by Caterpillar to meet the same high standards as all Genuine Cat Parts.
• Increased Engine Life — Resists oxidation and prevents build-up of deposits on pistons and rings.
• Extended Drain Intervals — Extends oil drain intervals while providing excellent engine protection and performance when
used in conjunction with our S•O•SSM Services oil analysis program.
• Proven Performance — Tested in Cat 3600 Series diesel engines worldwide.
Equipment Fluids
SAE Viscosity Grade SAE 40 {B}
API Service Classification CF {C}
CCMC D3
Caterpillar Performance Level (engine) 1M-PC
Allison Performance Level (transmission) C-3
Flash Point, °C (ASTM D92) 234
Pour Point, °C (ASTM D97) -32
Viscosity cSt @ 40° C (ASTM D445) 133
Viscosity cSt @ 100° C (ASTM D445) 13.8
Viscosity Index (ASTM D2270) 107
Sulfated Ash, % wt. (ASTM D874) 1.8
TBN (ASTM D2896) 13.5
Zinc, % wt. (ASTM D4951) 0.11
Gravity @ 16° C API (ASTM D287) 26.2
Phosphorus, % wt. (ASTM D1091) 0.10
{B} Passes FZG DIN 51354-2 A/8, 3/90 FLS 12.
{C} Can be used in applications where the obsolete API CD classification oil is recommended.

(gal) (L) Part Number (gal) (L) Part Number
SAE 40 SAE 40 (Continued)
0.250 (1 Qt.) -- 8C-3707 55 -- 8C-3704
1 -- 8C-3706 Bulk -- 155-6202
5 -- 8C-3705 -- 18 9X-2004
(Continued)
5-5
2925896
Cat® DEO™ Monograde (Continued)
For Cat 3600 Series Diesel Engines

SAE 40 (Continued) SAE 40 (Continued)
-- 19 9X-8529 -- 1000 9X-6272
-- 20 7X-7843 -- 1200 203-1044
-- 200 9X-8528 -- 2000 119-5134
-- 205 7X-7842 -- 10 000 119-5133
-- 10 004 8C-3703
2925944
Cat® DEO Cold Weather
Best Performance and Protection for Cold Weather Applications
Cat® DEO Cold Weather is a synthetic diesel engine oil designed with an extremely stable
formula tailored to provide long-lasting engine protection over a wide temperature range,
-40° F (-40° C) to 104° F (40° C). The backwards compatibility of Cat DEO Cold Weather makes
it well suited for mixed fleets of new and old machines. When used in engines equipped with
emissions reduction technologies, Cat DEO Cold Weather delivers the full life and performance
of aftertreatment components. Cat DEO Cold Weather exceeds the performance requirements
of Cat ECF-3 (Engine Crankcase Fluid Specification) and the API CJ-4 and API SM categories.
Cat DEO Cold Weather takes the trouble out of starting your engine when temperatures are
very low. The special formulation flows readily at low temperatures, reducing startup wear and
improving fuel economy in some applications. The outstanding thermal stability and oxidation
Equipment Fluids
resistance of Cat DEO Cold Weather keeps engine components cleaner, further reducing wear.
In testing, Cat DEO Cold Weather was shown to reduce piston deposits by more than 30% and
to have more than 80% better viscosity control than ECF-3 standards. These results demonstrate
that Cat DEO Cold Weather will help lower your owning and operating costs through fewer oil
changes and repairs.
Benefits
• Easier Engine Starts — Excellent low temperature performance eliminates hard starts
• Reduced Engine Wear — Improved detergents keep engine components cleaner
• Minimized Deposits — Reduced oxidation breakdown and thermal degradation improves
stability which minimizes the formation of deposits, sludge and varnish
• Full Component Life — Specially designed additives deliver superior engine protection
while supporting consistent emissions performance and extending the life of
aftertreatment system components
• Extended Drain Intervals — When regular S•O•SSM Oil Analysis is utilized, long oil life
is possible
Applications
Cat DEO Cold Weather is the preferred diesel engine oil for low temperature applications.1
Cat DEO Cold Weather supports consistent emissions performance in engines equipped with
aftertreatment devices designed to meet: 2
• 2007/2010 On-Highway exhaust emissions standards (US)
• Tier 4 (US)
• Stage IIIB/IV (EU)
• Step 4 (Japan)
(Continued)
5-6
2925944
Cat® DEO Cold Weather (Continued)
SAE Viscosity Grade 0W-40
API Service Classification Diesel: CJ-4, CI-4 PLUS/CI-4, CH-4; Gasoline: SM
OEM Performance Cat ECF-3, Cummins CES 20081, Mack EO-N PP ‘03
Viscosity cST @ 40° C (ASTM D445) 87
Viscosity cST @ 100° C (ASTM D445) 15.2
Viscosity Index (ASTM 2270) 186
Phosphorous, % wt. (ATM D4951) 0.111
Sulfur, % wt. (ASTM D2622) 0.4
TBN (ASTM D2896) 7.8
Zinc, %wt. (ASTM D4951) 0.121
Specific Gravity @ 16° C 0.844

-- 5 347-8468 -- Bulk 347-8471
5.3 20 347-8469 1.1 4 361-0923
Equipment Fluids
54.2 205 347-8470
1
Oil recommendations for 3116 and 3126 MUI Marine and MaK diesel engines can be found in the Operations & Maintenance Manual (OMM).
2
Aftertreatment devices can include Diesel Particulate Filters (DPF), Diesel Oxidation Catalyst (DOC), Selective Catalytic Reduction (SCR)
and/or Lean NOx Trap (LNT).
2925976
Cat® DEO-ULS™
(For the United States, Canada, and Mexico only)
Recommended Use
• Cat DEO-ULS exceeds the performance requirements of Cat ECF-3 (Engine Crankcase Fluid
Specification) and API CJ-4.
• Preferred for all 2007 on-highway, non-road Tier 4 U.S. EPA engines and Euro Stage IIIB
engines equipped with aftertreatment systems using 15-ppm sulfur fuel.
• May also be used with engines not equipped with aftertreatment systems using 2,000-ppm
(or less) sulfur fuel without affecting the oil change interval.
• Cat DEO-ULS is developed and tested to provide superior protection and life for
Cat engines.
• Better Detergents — Protect against piston and ring groove deposits.
• Advanced Additive Package — Improves protection of the engine and the Diesel
Particulate Filter (DPF).
• Enhanced Dispersants — Provide better soot-related viscosity control, prevents viscosity
loss from shearing and reduce oil consumption.
• Improved Protection from Thermal and Oxidative Breakdown — Withstands higher sump
temperatures while offering low-temperature pumpability.
(Continued)
5-7
2926001
Cat® DEO-ULS™ (Continued)
(For the United States, Canada, and Mexico only)

SAE Viscosity Grade SAE 15W-40 SAE 10W-30
API Service Classification — Diesel CJ-4, CI-4 PLUS/CI-4, CH-4
API Service Classification — Gasoline SM/SL
Caterpillar Performance Level ECF-3 ECF-3
Volvo Performance Level VDS-4/VDS-3 VDS-4/VDS-3
ACEA Performance Level E9-08/E7-04 E9-08/E7-04
Cummins Performance Level CES 20081
Mack Performance Level EO-O Premium Plus
DDC Performance Level PGOS 93K218
Flash Point, °C (ASTM D92) 236 230
Pour Point, °C (ASTM D97) -30 -27
Viscosity cSt @ 40° C (ASTM D445) 114 79
Viscosity cSt @ 100° C (ASTM D445) 15.0 11.9
Viscosity Index (ASTM D2270) 137 145
Sulfated Ash, % wt. (ASTM D874) 0.98 0.97 (ASTM D4739)
TBN (ASTM D2896) 10.4 10.4
Phosphorus, % wt. (ASTM D4951) 0.100 0.100
Sulfur, % wt. (ASTM D2622) 0.3 0.3
Gravity @ 16° C Specific 0.876
Equipment Fluids

(gal) (L) Qty. Part Number (gal) (L) Qty. Part Number
SAE 15W-40 Cat DEO-ULS 10W-30
1 -- -- 291-3866 1 -- 4 317-3081
5 -- -- 291-3868 5 -- -- 317-3083
55 -- -- 291-3869 55 -- -- 317-3084
Cat DEO-ULS 15W-40 Bulk -- -- 319-2260
Bulk -- -- 300-7913 -- 1 -- 341-0729
-- 1 -- 300-7914 -- 1200 -- 385-5942
-- 1000 -- 381-7214 -- 20 -- 308-1476
-- 20 -- 300-7915 -- 208 -- 317-3085
-- 208 -- 301-2233 -- 5 -- 368-4792
-- 4 -- 378-6535 -- Bulk -- 346-0465
-- 5 -- 368-4791
-- Bulk -- 349-2581
-- Bulk — Rail -- 335-2491
5-8
2926023
Cat® SAEO™
Recommended Use
• Cat Special Application Engine Oil is the only oil approved by Caterpillar for use in
the 3116 and 3126 Marine Diesel Engines with mechanical unit injection and a closed
crankcase ventilation system. This system circulates blowby gases from the engine
crankcase to the turbocharger inlet. These blowby gases can form harmful deposits
in the turbocharger and the aftercooler. Cat Special Application Engine Oil is designed
to reduce or eliminate the formation of these harmful deposits. 1
• Stops the buildup of deposits in the turbocharger compressor and the aftercooler that
can reduce power and cause an increase in smoke.
• Maintains stable oil consumption within the specified oil change interval and from
one interval to the next.
• Stabilizes functional chemistry throughout each service interval.
• Stops the buildup of deposits on pistons and rings that can increase oil consumption.
• Helps to eliminate the formation of deposits on pistons that are abrasive enough to polish
the hone pattern from the surface of the liners.
• Prevents the clumping of soot particles that can cause an abnormal increase in viscosity,
piston deposits, or sludge.

SAE Viscosity Grade SAE 30 SAE 40
Manufacturer 1K 1K
Manufacturer C4
Flash Point, °C (ASTM D92) 232 232
Equipment Fluids
Pour Point, °C (ASTM D97) -23 -18
Sulfated Ash, % wt. (ASTM D874) 0.9 0.9
TBN (ASTM D2896) 6.5 6.5
Zinc, % wt. (ASTM D1549) 0.12 0.12

SAE 30 SAE 40
1 -- 170-5262 1 -- 170-5261
5 -- 198-7368 5 -- 198-7369
Bulk -- 161-5824 -- 20 7X-7840
-- 20 9X-6462 -- 208 7X-7843
-- 208 9X-6463
1
Cat SAEO should not be used in 3406, 3126, C-10, C-12, or 3116 low emission on-highway truck engines. Use Cat DEO multi-grade oils.
5-9
Oils Natural Gas Engine Oil
2926056
Cat® NGEO™
Recommended Use
• Designed for engines using gaseous fuels.
• Compatible with exhaust catalyst applications that require a low-phosphorus oil.
• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain less than
0.43 mg hydrogen sulfide per mega Joule (0.35 mg hydrogen sulfide per BTU).
• Cat NGEO is formulated from select base stocks blended with special additives to provide
an economical engine oil for natural gas applications. Cat NGEO is developed, tested and
approved by Caterpillar to meet the same high standards as all Genuine Cat Parts.
• High-Endurance Lubrication — Performs throughout the long oil change intervals common
for gaseous fuel engines.
• Reduced Piston and Cylinder Wear — Anti-oxidation and anti-nitration properties prevent
carbon deposit buildup to minimize scuffing, scoring and wear.
• Increased Valve Life — Protects against damage to guide faces and seals.
• Corrosion Protection — Neutralizes acids to prevent rust and copper corrosion.
• High-Temperature Performance — Provides excellent thermal stability and resists foaming
and sludge formation.

SAE Viscosity Grade SAE 40
Gravity, API 27.5
Equipment Fluids

TBN, mg KOH/g (ASTM D2896) 6.2
Phosphorus, % wt. (Spectro or AA) 0.030
Calcium, % wt. (Spectro or AA) 0.125

-- 200 197-6911 -- 208 105-3336
-- 19 121-0327 -- 209 166-3491
-- 205 9X-8527 -- 1000 159-8156
2926089
Cat® NGEO EL250™

Applications
• For natural gas engines and other engines requiring low ash oil.
Features
• Increased detergent concentration and acid neutralizing capability to assure less lacquer and deposits on pistons
and valves.
• Control of sludge formulation.
• Outstanding resistance to oil nitration and oxidation.
Benefits
• Improves ring and liner service life.
• Increased soot-handling capability.
(Continued)
5-10
Natural Gas Engine Oil Oils
2926089
Cat® NGEO EL250™ (Continued)
• Protection against valve guide face and seat damage, piston scuffing, scoring and piston/cylinder wear, foam and corrosion
damage, and piston carbon deposits.
English Volume (gal) Metric Volume (L) Part Number

SAE 40
-- 20 216-9221
-- 208 216-9224
-- Bulk 7X-2426
2926123
Cat® NGEO EL350™
Recommended Use
• Provides superior lubrication in high-horsepower gaseous-fueled engines.
• Compatible with exhaust catalyst applications that require a low-phosphorus oil.
• Compatible with “lean burn” engines requiring low-ash oil.
• Provides optimum engine and oil life with low-sulfur gaseous fuels that contain less than
0.43 mg hydrogen per mega Joule (0.35 mg hydrogen sulfide per BTU).
• May be used in engines that use high-sulfur gas or bio-gas, provided that shorter drain
intervals are employed.
• Cat NGEO EL350 is developed, tested and approved by Caterpillar to meet the same
high standards as all genuine Cat parts.
• Factory-Fill — Used as standard factory-fill for Cat natural gas engines.
• Reduced Piston and Cylinder Wear — Anti-oxidation and anti-nitration properties prevent
deposit buildup to minimize scuffing, scoring and wear.
Equipment Fluids
• Increased Spark Plug and Valve Life — Excellent detergent and dispersant additives
protect against deposits and damage.
• Corrosion Protection — Acid neutralizers protect parts from rust and copper corrosion.
• Extended Drain Intervals — Provide extended oil drain capabilities when used in
conjunction with our S•O•SSM Services oil analysis program.

Gravity @ 16° C, API (ASTM D287) 29.3
Gravity @ 16° C, Specific 0.882
TBN, mg KOH/g (ASTM D2896) 6.2
Phosphorus, % wt. (Spectro or AA) 0.03
Calcium, % wt. (Spectro or AA) 0.13

5 -- 225-5082 -- 1000 249-2309
55 -- 225-5083 -- 20 225-5084
Bulk -- 272-3217 -- 205 269-1971
(Continued)
5-11
Oils Natural Gas Engine Oil
2926123
Cat® NGEO EL350™ (Continued)
SAE 40 (Continued)
-- 208 225-5085
-- Bulk 283-0781
2969251
Cat® NGEO Advanced 40
Cat® NGEO Advanced 40 is an SAE 40 viscosity grade. The oil is designed to specifications that provide superior lubrication
performance in Cat® natural gas engines. Cat NGEO Advanced 40 is formulated from select base stocks blended with special
additives to provide:
• Excellent oxidation stability and nitration control properties
• Good thermal stability for high temperature deposit control
• Reduced carbon and sludge formation
Reduced Piston and Cylinder Liner Wear
• High temperature deposit control properties prevent deposit buildup on pistons and piston rings to minimize scuffing,
scoring, and wear.
Increased Spark Plug and Valve Life
• Excellent detergent and dispersant additives protect against deposits and damage.
Corrosion Protection
• Acid neutralizers protect parts from rust and copper corrosion.
NGEO Advanced 40 provides optimum engine and oil life with low-sulfur gaseous fuels that contain less than 0.43 mg hydrogen
per mega Joule (0.35 mg hydrogen sulfide per BTU). NGEO Advanced 40 may be used in engines that use high-sulfur gas,
provided that shorter drain intervals are employed.
Equipment Fluids

Viscosity Grade SAE 40
Viscosity cSt (D445)
40° C 115
100° C 12.7
Total Base Number, mg KOH/g (ASTM D2896) 6
Phosphorus, % wt. (Spectro) 0.03
Calcium, % wt. (Spectro) 0.15

Cat NGEO Advanced 40
-- 208 331-7031
-- Bulk 331-7032
5 -- 381-2364
55 -- 381-2365
-- 1000 381-2367
-- 20 331-7030
5-12
Hydraulic Oil Oils
2926163
Cat® Bio HYDO™ Advanced
High Performing, Environmentally Friendly
Cat® Bio HYDO™ Advanced is an environmentally friendly hydraulic fluid that has the drain interval of premium mineral-based
oil. Developed for use in any environment, Cat BIO HYDO Advanced provides superior performance across a wide temperature
range and many applications, including: Construction, Forestry, Dredging, Ports, and Tunnel Boring.
Benefits:
Environmentally Friendly
• Non-toxic formula
• Readily biodegradable
• EU Flower eco-label certified
Extended Drain Intervals
• Excellent oxidation stability
• Comparable to premium mineral-based hydraulic oils
Exceptional System Protection
• Superior wear protection
• Corrosion resistance
• Fast air release
Features
• Long Life — Cat Bio HYDO Advanced outperforms the previously recommended Cat Bio HYDO and competitive brands.
In fact, Cat Bio HYDO Advanced performance is comparable to premium mineral-based hydraulic oils. Like Cat HYDO
Advanced, Cat Bio HYDO Advanced can be taken up to a 6,000 hour drain interval with Cat S•O•SSM Fluid Analysis.
• Biodegradable — readily biodegradable and non-toxic, so that it can be used in environmentally sensitive areas without
concern.
• Wide temperature Range Protection — maintains consistent wear protection throughout the entire temperature range,
-22° F (-30° C) — 113° F (45° C). From cold start through to operating temperature, Cat Bio HYDO Advanced gives you the
Equipment Fluids
best system protection.
• Improved Flow Through Filters — retains its ability to flow through filters even when water is present.
• Seal Compatibility — Cat Bio HYDO Advanced is highly compatible with the seals used in Cat Hydraulic systems.
This means fewer leaks and lower maintenance costs.
• Component Protection — specially developed additives form a protective layer on wear surfaces, reducing wear
in hydraulic pumps and other components. Cat BIO HYDO Advanced provides excellent corrosion protection to steel
and bronze components, even at high temperatures.
(Continued)
5-13
Oils Hydraulic Oil
2926163
Cat® Bio HYDO™ Advanced (Continued)
Cat Bio HYDO Advanced Typical Characteristics {A}
Characteristics Cat Bio HYDO Advanced Typical Environmentally Typical Premium Benefits of Cat Bio
(HEES) Friendly Synthetic Ester Industrial Hydraulic HYDO Advanced
HEES Hydraulic Oil {B} Oil {B}, HVLP {B}, HV {B}
Oxidation Stability More than 3,000 hrs Less than 500 hrs (Dry) 2,000 hrs Long Drain
Test, ASTM D493 (Dry) Interval Results in
(Longer is better) Reduced Owning &
Operating Cost
Long Drain Interval Yes No No --
Capability
Suitable for use in Yes Yes No Low Environmental
Environmentally Impact
Sensitive Areas
Renewable Content, >80% >50% None --
ASTM D6866
Viscosity at 100° C, 8.6 cSt 8.1-9.0 cSt 8.0 cSt Excellent Wear
ASTM D445 Protection and
Wide Operating
Temperature Range
Viscosity at 40° C, 44.3 cSt 46 cSt 46 cSt Cat Bio HYDO Advanced
ASTM D445 is Recommended for
Ambient Temperatures
from -30° C to +45° C
Viscosity Index, 176 150-180 140 --
Equipment Fluids
ASTM D2270
(Higher is Better) {C}
Viscosity at 100° C, 8.6 cSt 9 cSt 6.6 cSt --
ASTM D445 During Use
After Shear {C}
Pour Point, ASTM D 97 -45° C -36° C -36° C --
Brookfield Viscosity at 1,227 cP 2,500 cP 2,500 cP --
-20° C ASTM D2983
Brookfield Viscosity at 3,039 cP -- -- --
-30° C ASTM D2983
{A} The values shown here are typical values and should not be used as quality control parameters to either accept or reject product.
{B} Not recommended for use in Cat Hydraulic systems.
{C} High Viscosity Index oils containing viscosity modifier additives will become thinner during use, this will reduce the level of protection.
(Continued)
5-14
Hydraulic Oil Oils
2969440
Cat® Bio HYDO™ Advanced (Continued)
Cat Bio HYDO Advanced Typical Characteristics {A} (Continued)
Characteristics Cat Bio HYDO Advanced Typical Environmentally Typical Premium Benefits of Cat Bio
(HEES) Friendly Synthetic Ester Industrial Hydraulic HYDO Advanced
HEES Hydraulic Oil {B} Oil {B}, HVLP {B}, HV {B}
FZG Gear Test, >12 12 11 Excellent Wear
DIN 51534, Fail Stage Protection and
(Higher is better) {D} Wide Operating
Temperature Range
4-Ball Wear Test, 0.35 mm — — Cat Bio HYDO Advanced
ASTM D4172 is recommended for
Ambient Temperatures
from -30° C to +45° C
35VQ25 Total Wear, mg 25 mg <90 mg <90 mg --
(Lower is better)
Air Release at 50° C 1 minute 7 min-13 min 7 min-13 min Faster Air Release
(ASTM D3427) Reduces Cavitation
(Lower is better) Damage
Copper Strip Corrosion, 1A at 150° C 1B at 100° C 1B at 100° C Best in Class Corrosion
ASTM D130, 3 Hours Protection
(1A is better than 1B,
1A at 150° C is better
than 1A at 100° C)
Corrosion Protection, Pass Pass Pass --
ASTM D665B
Equipment Fluids
{A} The values shown here are typical values and should not be used as quality control parameters to either accept or reject product.
{B} Not recommended for use in Cat Hydraulic systems.
{D} In addition to high FZG rating, the oil must demonstrate excellent protection to hydraulic pumps and motors, excellent corrosion protection
and compatibility with metal and seals.
Cat Bio Hydo Advanced

-- 5 143-3218
5.3 -- 339-3249
55 -- 339-3250
-- 20 341-2442
-- 208 341-2443
5-15
Oils Hydraulic Oil
2926201
Cat® HYDO™ Advanced 10
6,000 Hour Extended Drain Intervals
Cat is introducing a new hydraulic oil to the fluid product line, Cat HYDO Advanced 10.
This new oil is a combination of premium additives and specially selected and controlled
higher quality base oils designed to provide extended drain intervals and extra protection
to hydraulic system components.
Cat HYDO Advanced 10 represents a significant performance breakthrough in hydraulic oil

technology. This oil has been developed with an optimized formulation that has been subjected
to severe qualification testing in the field and laboratory for thousands of hours. The result is the
best product available for Cat hydraulic systems.
Features & Benefits
• 6,000 hour extended drain intervals — up to the hours of Cat HYDO 10W when monitored
with Cat S•O•SSM Services oil analysis program-every 500 hours. Reduces owning and
operating costs and increases uptime.
• Enhances long lasting anti-wear protection — specially developed additives form a
protective layer on the wear surfaces, reducing component wear in high-pressure piston,
vane and gear hydraulic pumps.
• Holds water in dispersion — contains emulsifiers specially designed to disperse water.
Cat does not recommend oils that “separate,” “shed” or “release” water. Separated water
drawn through the hydraulic system can damage pumps and other components. If this
water freezes, it can cause serious damage.
• Backward compatibility — the only hydraulic oil you need to stock for your maintenance
operations. Preferred fill for Cat equipment.
• Improved filtration properties — special detergent dispersants keep components clean
Equipment Fluids
and improve transport of contaminants through the filters. Compatible with Cat Ultra High
Efficiency filters.
• Improved corrosion protection — protects metal surfaces from rust. Better corrosion
protection than most oils in the Cat line-up.
• Faster air release — rapid air separation reduces air release time, preventing cavitation,
Cat HYDO Advanced 10 air release time of less than 4 minutes is far superior compared
to Cat HYDO 10W at 7-10 minutes air release time (per ASTM D3427 testing).
• Wide temperature range protection — maintains consistent wear protection at both cold
and hot temperatures. Designed to flow readily at cold temperature start up, and maintains
excellent wear protection at operating temperatures.
• Improved oil stability — 250% increase in oxidation stability per ASTM D943. Improved oil
stability and wear protection make Cat HYDO Advanced 10 last longer.
(Continued)
5-16
Hydraulic Oil Oils
2926201
Cat® HYDO™ Advanced 10 (Continued)
Cat HYDO Advanced 10 Typical Characteristics {A}
Characteristics HYDO Advanced 10 Typical Diesel Engine Typical Premium HYDO Advanced 10
Oil API CF SAE 10W Industrial Hydraulic Oil, Advantages
HVLP or HV
SAE Viscosity Grade 10W 10W Varies
Viscosity
cSt @ 40° C (ASTM D445) 42 40 46 Better wear protection,
wider operating
temperature range
cSt @ 100° C (ASTM D445) 6.7 6.3 8.0 --
Viscosity Index 114 105 146 --

(ASTM D2270)
Viscosity after Shear 6.7 6.3 6.6 --
(cSt, during use) {B}
FZG Gear Test DIN 51534, 12 12 11 --

Fail Stage {C}
35VQ25 Vickers Total 33 mg 40-90 mg <90 mg --

Wear Test
Equipment Fluids
4 Ball (40 kg/30 min/ 0.37 mm Varies Varies --
600 rpm/93° C ASTM D4172)
Pour Point, °C (ASTM D97) -39 -30 -36 --
Pumping @ -30° C mPaS 15,000 Varies Varies --

(ASTM D4684)
Zinc, % wt. (ASTM D4951) 0.090 Varies <0.040 --

typical
Copper Strip Corrosion 1A @ 150° C 1A @ 100° C 1A @ 100° C Corrosion protection

(3 hr, ASTM D130) {D}
{B} Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce protection level.
{C} Higher is typically better, but too much active anti-wear additives may lead to reduced component life.
{D} 1A is better than 1B, 1A at 150° C is better than 1A at 100° C.
(Continued)
5-17
Oils Hydraulic Oil
2926227
Cat HYDO Advanced 10 Typical Characteristics
Characteristics HYDO Advanced 10 Typical Diesel Engine Oil Typical Premium HYDO Advanced 10
API CF SAE 10W Industrial Hydraulic Oil, Advantages
HVLP or HV
Rust Protection Pass Varies Varies Corrosion protection
(ASTM D665B) {E}
Oxidation stability, hours >5,000 2,000 hours 2,000 hours Long Drain Interval,
(ASTM D943) lower owning and
operating costs
Long Drain Interval, Yes No No --
confirmed by
field testing
Filterability, Wet, E DIN Pass Fail Pass Reduced filter plugging
ISO 13357-1 improves contamination
control, due to better
filtration
Air Release @ 50° C 4 minutes 7-10 minutes 7-13 minutes Better air release
(ASTM D3427) reduces cavitation
damage
Foam Test {F} Varies Varies --
Seq. 1 ml. (ASTM D892) 0/0 --
Seq. 2 ml. (ASTM D892) 5/0 --
Seq. 3 ml. (ASTM D892) 0/0 --
Equipment Fluids
Cleanliness No interference with Interferes with optical Varies Accurate contamination

optical particle counters particle counters control
Ability to keep water in Yes Yes No Sludge control
emulsion and water damage
prevention
{E} May be difficult to pass with 10W engine oils.
{F} New oil, as received, with 0.1% water by volume added.
English Volume Metric Volume Package English Volume Metric Volume Package
(gal) (L) Quantity Part Number (gal) (L) Quantity Part Number
1 -- 4 309-6932 -- 60 -- 309-6941
5 -- -- 309-6931 -- 200 -- 309-6940
55 -- -- 309-6930 -- 205 -- 309-6939
Bulk -- -- 314-5168 -- 208 -- 309-6938
Bulk Railcar -- -- 309-6929 -- 1000 -- 309-6937
-- 5 -- 309-6945 -- 2000 -- 309-6936
-- 18 -- 309-6944 -- 10 000 -- 309-6935
-- 19 -- 309-6943 -- 15 000 -- 309-6934
-- 20 -- 309-6942 -- 15 004 -- 314-5169
5-18
Hydraulic Oil Oils
2926239
Cat® HYDO™ Advanced 30
6,000 Hour Extended Drain Intervals
Caterpillar is introducing a new Cat® HYDO Advanced 30 hydraulic oil to the fluid product line. Cat HYDO Advanced 30
compliments the recently introduced Cat HYDO Advanced 10. These new oils are a combination of premium additives and
specially selected and controlled higher quality base oils designed to provide extended drain intervals and extra protection
to hydraulic system components.
Cat HYDO Advanced 30 and 10 represent a significant performance breakthrough in hydraulic oil technology. These oils have
been developed with an optimized formulation that has been subjected to severe qualification testing in the field and laboratory
for thousands of hours. The result is the best product available for Cat machine hydraulic systems.
Cat HYDO Advanced 30 is an oil specifically formulated for working in consistently hot climates with temperatures ranging
above 40° C (104° F).
Features & Benefits
• 6,000 hour extended drain intervals — up to triple the hours of Cat® HYDO 30 when monitored with Cat® S•O•SSM Services oil
analysis program — every 500 hours. Reduces owning and operating costs and increases uptime.
• Enhances long lasting anti-wear protection — specially developed additives form a protective layer on the wear surfaces,
reducing component wear in high-pressure piston, vane, and gear hydraulic pumps.
• Holds water in dispersion — contains emulsifiers specifically designed to disperse water. Cat does not recommend oils that
“separate,” “shed,” or “release” water. Separated water drawn through the hydraulic system can damage pumps and other
components. If this water freezes, it can cause serious damage.
• Backward compatibility — the only hydraulic oil you need to stock for your maintenance operations. Preferred fill for
Cat equipment.
• Improved filtration properties — special detergent dispersants keep components clean and improve transport of
contaminants through the filters. Compatible with Cat Ultra High Efficiency filters.
• Improved corrosion protection — protects metal surfaces from rust. Better corrosion protection than most oils in the
Cat line-up.
Equipment Fluids
• Wide temperature range protection — maintains consistent wear protection at both cold and hot temperatures.
Designed to flow readily at cold temperature start up, and maintains excellent wear protection at operating temperatures.
• Improved oil stability — 250% increase in oxidation stability per ASTM D943. Improved oil stability and wear protection
make Cat HYDO Advanced last longer.
(Continued)
5-19
Oils Hydraulic Oil
2926239
Cat HYDO Advanced 30 Typical Characteristics {A}
Characteristics HYDO Advanced 30 HYDO Advanced 30 Advantages
SAE Viscosity Grade 30 Better wear protection, wider operating
temperature range
Viscosity --
cSt @ 40° C (ASTM D445) 90 --
cSt @ 100° C (ASTM D445) 10.6 --
Viscosity Index (ASTM D2270) 100 --
Viscosity after Shear (cST, during use) {B} 10.6 --
4 Ball (40 kg/30 min/600 rpm/93° C 0.30 mm --
ASTM D4172)
Pour Point, °C (ASTM D97) -24 --
Brookfeld Viscosity @ -20° C 13,600 --
(ASTM D2983) mPaS
Zinc, % wt. (ASTM D495) typical 0.090 --
Copper Strip Corrosion 1A @ 150° C Corrosion protection
(3 hr, ASTM D130) {C}
Rust Protection (ASTM D665B) Pass --
Oxidation stability, hours (ASTM D943) >5,000 Longer drain interval; lower owning
and operating costs
Long Drain Interval, confirmed by Yes --
field testing
Equipment Fluids
Filterability, Wet, E DIN ISO 13357-1 Pass Reduced filter plugging; improves
contamination control due to
better filtration
Foam Test {D} Reduces foaming
Seq. 1 ml. (ASTM D892) 0/0 --
Seq. 3 ml. (ASTM D892) 0/0 --
Seq. 3 ml. (ASTM D892) 0/0 --
Cleanliness No interference with optical Accurate contamination control
particle counters
Ability to keep water in emulsion Yes Sludge control and water
damage prevention
{B} Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce protection level.
{C} 1A is better than 1B, 1A at 150° C is better than 1A at 100° C.
{D} New oil, as received, with 0.1% water by volume added.
Metric Volume (L) Part Number Metric Volume (L) Part Number
18 319-5920 208 319-5923
20 319-5921 Bulk 319-5919
200 319-5922
5-20
Transmission and Drive Train Oil Oils
2926266
Cat® TDTO™
Recommended Use
• Preferred lubricant for Cat power shift transmissions, most final drives and wet brake
compartments.
• Cat machine compartments where TO-4 and TO-4M specification oils are recommended.
• Other manufacturers’ machines that recommend TO-4 or TO-4M or specification oils for
their transmissions, final drives and wet brake compartments.
• Cat TDTO is developed, tested and approved by Caterpillar to meet the same high
standards as all genuine Cat parts.
• Factory-Fill — Used as standard factory-fill for Cat machine compartments where TO-4 oils
are specified.
• Longer Clutch Life — Prolongs clutch disc life up to 45%.
• Optimum Wear Life — Ensures long life and excellent performance for gears, bearings and
friction disc material.
• System-Matched Formula — Engineered as an integral part of Cat power shift
transmissions, most wet brake compartments, and Hydrostatic Systems.

SAE Viscosity Grade SAE 10W SAE 30 SAE 50
Caterpillar Test TO-4 TO-4 TO-4
Allison Test C-4 C-4 C-4
ISO Viscosity Grade 46 100 220
Flash Point, °C (°F) (ASTM D92) 202 (395) 224 (435) 240 (464)
Pour Point, °C (°F) (ASTM D97) -33 (-27) min. -18 (0) min. -15 (5) min.
Equipment Fluids
Viscosity cP @ -25° C (ASTM D5293) 6840
Viscosity cSt @ 40° C (ASTM D445) 42.0 100 195
Viscosity cSt @ 100° C (ASTM D445) 6.3 11.2 18.0
Viscosity Index (ASTM D2270) 97 97 96
Sulfated Ash, % wt. (ASTM D4951) 1.2 1.2 1.2
TBN (ASTM D2896) 7.9 7.9 7.9
Zinc, % wt. (ASTM D4951) 0.127 0.127 0.127
Gravity API (ASTM D287) 29.7 27.0 24.7
Phosphorus, % wt. (ASTM D4951) 0.110 0.110 0.110
Calcium, % wt. 0.298 0.298 0.298
(Continued)
5-21
Oils Transmission and Drive Train Oil
2926266
Cat® TDTO™ (Continued)
SAE 10W SAE 30 (Continued)
5 -- -- 8T-9568 -- 20 -- 7X-7855
55 -- -- 8T-9569 -- 200 -- 7X-2888
Bulk -- -- 155-6212 -- 205 -- 7X-7854
-- 5 -- 100-7019 -- 208 -- 9X-6466
-- 19 -- 145-0995 -- 1000 -- 7X-7611
-- 20 -- 7X-7852 -- Bulk -- 2P-9869
-- 25 -- 9X-8525 SAE 50
-- 200 -- 112-2866 5 -- -- 8T-9576
-- 205 -- 7X-7851 55 -- -- 8T-9577
-- 208 -- 103-2528 Bulk -- -- 155-6214
-- 209 -- 123-3104 -- 5 -- 9X-8443
-- 1000 -- 166-0393 -- 18 -- 9X-2012
-- Bulk -- 3P-0659 -- 19 -- 9X-8531
SAE 30 -- 20 -- 7X-7858
1 -- 4 248-7521 -- 200 -- 9X-8530
5 -- -- 8T-9572 -- 205 -- 7X-7857
55 -- -- 8T-9573 -- 208 -- 3E-9478
Bulk -- -- 155-6213 -- 1000 -- 7X-7612
-- 5 -- 9X-6467 -- Bulk -- 5P-1228
Equipment Fluids
-- 18 -- 9X-2010
-- 19 -- 9X-8469
2926333
Cat TDTO-TMS™
®
Recommended Use
• Cat transmissions, wet brakes and hydraulic compartments that must operate in wide
temperature ranges.
• Cat machine compartments where TO-4 and TO-4M specification oils are recommended.
• Other manufacturers’ machines that recommend TO-4 or TO-4M specification oils for their
transmissions, final drives and wet brake compartments.
• Cat TDTO-TMS is a proprietary formulation that was specifically developed, tested and
approved by Caterpillar to ensure peak performance in your transmission and to meet the
same high standards as all genuine Cat parts.
• Longer Component Life — Reduces wear on transmission gears.
• Improved Cold-Weather Performance — Improves performance and efficiency of
transmissions in cold weather, especially for machines with electronic controls.
• Optimum Wear Life — Ensures long life and excellent performance for gears, bearings and
friction disc material.
• Fewer Oils, Fewer Changes — Can be used in multiple compartments with extended drain
intervals over multiple seasons.
(Continued)
5-22
Transmission and Drive Train Oil Oils
2926333
Cat® TDTO-TMS™ (Continued)
SAE Viscosity Grade Multi-Viscosity
Caterpillar Test TO-4M, TO-4
Allison Test C-4
Gravity, API (ASTM D287) 29.2
Flash Point, °C (°F) (ASTM D92) 222 (432)
Pour Point, °C (°F) (ASTM D97) -39 (-38)
TBN (ASTM D2896) 8.4
Zinc, % wt. (ASTM D4951) 0.127
Calcium, % wt. 0.298
KRL Shear Stability 10.0%

Multi-Viscosity Multi-Viscosity (Continued)
Equipment Fluids
5 -- 154-0195 -- 20 154-0196
55 -- 154-0194 -- 208 154-0197
Bulk -- 154-0192 -- Bulk 154-0193
2926363
Cat® TDTO™ Cold Weather
Best Performance and Protection for Cold Weather Applications
Cat TDTO Cold Weather is a synthetic blend lubricant that provides superior performance
and protection in transmissions, torque converters, final drives, hydraulics and/or wet brakes
at temperatures down to -40° F (-40° C). The special formulation creates optimal friction
performance and controls transmission slippage while eliminating clutch glazing. Cat TDTO Cold
Weather has excellent compatibility with all materials used in Cat machines, including friction
materials, seals and elastomers. The outstanding thermal stability and oxidation resistance
gives Cat TDTO Cold Weather long drain intervals.
Benefits:
Performance
• Easier Engine Starts
• Greater Machine Rim Pull and Breakout Force
• Long Drain Intervals
Protection
• Promotes Transmission Durability
• Increased Clutch, Gears and Bearing Life
• Optimal Cold Weather Friction Performance
(Continued)
5-23
Oils Transmission and Drive Train Oil
2926363
Cat® TDTO™ Cold Weather (Continued)
Applications
Cat TDTO Cold Weather is the preferred transmission and drive train oil for low temperature
operation in certain applications and can be used in wet brakes and hydraulics. Refer to
SEBU6250 for more information.
Cat TDTO Cold Weather is also recommended for applications with the following original
equipment manufacturer requirements:
• Cat TO-4
• Allison C-4
• Komatsu Micro-Clutch
• Vickers 35VQ25
Long Drain Intervals
With the use of Cat S•O•SSM Oil Analysis and Cat Filters, Cat TDTO Cold Weather is capable
of long change intervals.

SAE Viscosity Grade 0W-20
Gravity @ 16° C (60° F)
Gravity @ API (ASTM D287) 30.8
Specific Gravity 0.872
Flash Point @ °C (ASTM D92) 170
Pour Point @ °C (ASTM D97) -54
Kinematic Viscosity (ASTM D445)
cSt @ 40° C 32.9
cSt @ 100° C 7.5
Equipment Fluids
Brookfield Viscosity (ASTM D2983)

cP @ -40° C 7,000
Total Base Number (TBN) (ASTM D664) 7.9
Low Temperature Pumpability @ °C (ASTM D4684) -54
Phosphorus, ppm 1,060
Zinc, ppm 1,250
Calcium, ppm 3,000
Sulfated Ash, % wt. 1.2

-- 4 4 341-1949 -- 205 -- 228-6070
-- 4 1 332-8851 Bulk -- -- 301-4523
-- 20 -- 228-6069
5-24
Final Drive and Axle Oil Oils
2926400
Cat® FDAO™
Recommended Use
• Preferred lubricant for Cat Off-Highway Truck front wheels, differentials and final drives.
• Preferred lubricant for Cat Large Track-Type Tractor, Pipelayer, and Track Skidder final
drives (steel-tracked machines with elevated final drives except the D5M, D6M and 561M).
• Compatible with Cat final drives and axles that previously specified TO-4 lubricants and
do not contain friction material.
• Cat FDAO is developed, tested and approved by Caterpillar to meet the same high
• Factory-Fill — Used as standard factory-fill for Cat Off-Highway Trucks and Large
Track-Type Tractors.
• Extended Drain Intervals — Allows for double-length drain intervals in off-highway truck
final drives, as compared to TO-4 commercial oils.
• Minimal Foaming — Formulated to protect against the damaging effects of air.

ISO Viscosity Grade 320
Caterpillar Test FD-1
Gravity, 16° C API (ASTM D287) 25.9
Gravity, 16° C Specific 0.899
Pour Point, °C (°F) (ASTM D97) -15 (5)
Equipment Fluids
Viscosity cP @ -10° C (ASTM D2983) 75,000
Copper Strip (ASTM D130, 2 hrs @ 100° C) 1A

5 -- 184-6022 -- 200 198-7672
55 -- 184-6021 -- 205 201-9855
Bulk -- 184-6020 -- 208 184-8056
-- 18 206-5210 -- 1000 221-3445
-- 20 184-8055 -- 1200 202-9753
-- Bulk 184-8054
5-25
Oils Final Drive and Axle Oil
2926434
Cat® FDAO SYN™
Recommended Use
• Preferred lubricant for Cat Off-Highway Truck and D11R carrydozer front wheels,
differentials and final drives operating under high load factors.
• Compatible with Cat final drives and axles that previously specified Cat FDAO or TO-4
lubricants and do not contain friction material.
• Cat FDAO SYN is developed, tested and approved by Caterpillar to meet the same high
• Extended Drain Intervals — Extend drain intervals up to a factor of three in off-highway
truck final drives, as compared to Cat TDTO and TO-4 oils.
• Minimal Foaming — Formulated to protect against the damaging effects of air.
• Longer Bearing and Gear Life — Has demonstrated the capability to double bearing life
and quadruple gear life when compared to TDTO and T0-4 oils used in off-highway truck
final drives.

SAE Viscosity Grade Multigrade
ISO Viscosity Grade 320
Caterpillar Test FD-1
Gravity, 16° C API (ASTM D287) 33.4
Flash Point, °C (°F) (ASTM D92) 246 (474) min.
Equipment Fluids

Copper Strip (ASTM D130, 2 hrs @ 100° C) 1A

Multi-Viscosity Multi-Viscosity (Continued)
5 -- 208-2390 -- 18 206-5211
55 -- 198-7450 -- 208 206-5212
5-26
Gear Oil Oils
2926463
Cat® GO
Recommended Use
• Cat GO does not meet Cat TO-4 specifications and should not be used when TO-4 is
recommended
• Cat GO is a multi-viscosity API GL-5 classification gear oil intended for extreme-pressure
applications, such as the following:
• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated Trucks,
Wheel Excavators, and Backhoe Loaders.
• Cold Planer direct drive transmissions, differentials and final drives.
• Drum bearings on Vibratory Soil Compactors.
• Cat GO is tested and approved by Caterpillar to meet the same high standards as all
genuine Cat parts.
• Longer Gear and Bearing Life — Superior thermal stability and oxidation resistance reduce
deposits and wear.
• Extreme-Pressure Performance — Provides extra protection for improved performance
and life in extreme-load conditions.
• Simplified Maintenance — Multi-purpose capability reduces number of gear lubricants
needed for maintenance.
• Wide Temperature Range — Provides excellent stability at high temperatures and superior
performance at low temperatures for easier start-ups.

SAE Viscosity Grade SAE 80W-90 SAE 85W-140
Gravity @ 16° C API (ASTM D287) 26.6 25.1
Equipment Fluids
Flash Point, °C (°F) (ASTM D92) 210 (410) 230 (446)
Pour Point, °C (°F) (ASTM D97) -27 (-17) -18 (0)
Viscosity cSt @ 40° C (ASTM D445) 139 333
Viscosity cP @ -26° C (ASTM D2983) 110,000 N/A
Viscosity Index (ASTM D2270) 104 99

5 -- 8T-9582 -- 1000 119-5129
15 -- 8C-7398 -- 1200 8C-9927
30 -- 8T-9583 -- Bulk 2P-9863
55 -- 8T-9584 SAE 85W-140
Bulk -- 155-6220 5 -- 9X-6185
-- 5 9X-6470 -- 4 7X-7618
-- 20 7X-7867 -- 18 133-9643
-- 60 7X-7887 -- 19 9X-8535
-- 208 9X-6469 -- 20 7X-7617
(Continued)
5-27
Oils Gear Oil
2926463
Cat® GO (Continued)
SAE 85W-140 (Continued) SAE 85W-140 (Continued)
-- 200 205-4312 -- 1000 7X-7615
-- 205 7X-7616 -- Bulk 7X-7614
-- 209 133-9644
2926513
Cat® Synthetic GO
Recommended Use
• Cat GO does not meet Cat TO-4 specifications and should not be used when TO-4 is
recommended.
• Cat Synthetic GO is a full synthetic multi-viscosity API GL-5 classification multipurpose
gear oil for the following applications:
• Sealed-and-lubricated track pins on Cat Track-Type Tractors and Track-Type Loaders.
• Track-Type Tractor equalizer bar ends.
• Differentials and final drives on Cat Wheel Tractor-Scrapers, specific Articulated Trucks,
Wheel and Mini Excavators, and Backhoe Loaders.
• Specific Articulated Trucks as recommended in your Operation and Maintenance Manual.
• Motor Grader circle drives.
• Cold Planer direct drive transmissions, differentials and final drives.
• Drum bearings on Vibratory Soil Compactors.
• Speed reducers on augers and elevators.
Equipment Fluids
• Cat Synthetic GO is tested and approved by Caterpillar to meet the same high standards
as all genuine Cat parts.
• Maximum Gear and Bearing Life — Provides ultimate protection against scoring of gear
teeth, as well as pitting in gear teeth and rolling-element bearings.
• Extended Track Life — Improves galling resistance, reduces seal wear and minimizes
bushing end grooving in sealed-and-lubricated track joints.
• Wide Temperature Range — Offers superior stability at high temperatures and superior
performance at low, even arctic, temperatures.
• Reduced Wear — Provides excellent oxidation resistance which reduces buildup of
harmful deposits.
• Extreme-Pressure Performance — Offers powerful protection under extreme duty conditions.
• Factory-Fill — Used as standard factory-fill for Cat machines.
(Continued)
5-28
Gear Oil Oils
2926513
Cat® Synthetic GO (Continued)
SAE Viscosity Grade SAE 75W-140
API Service Classification GL-5, MT-1
Gravity API (ASTM D287) 31.7
Gravity, Specific 0.867
Channel Point, °C (°F, max [FTMS 791A-3456]) -45 (-49)

SAE 75W-140
1 -- 350-9509
5 -- 242-3466
55 -- 242-3467
-- Bulk 8C-3400
Equipment Fluids
5-29
Oils Special Application Oils
2926552
Compactor Oil
• Special synthetic oil used in vibrator drum of Compactors
• Packaged in 20 L (5 gal) pails
• Large machines take 20 L (5 gal) per drum
• Small machines take 10 L (2 1/2 gal) per drum
Part Number EAME Part Number Qty. Size

353-4980 -- 1 3.800 L (1.004 gal)
4C-6767 185-4759 1 20 L (5.283 gal)
2926571
Cat® MTO
Recommended Use
• Recommended for older Cat Backhoe Loader rear axles and Cat Challenger Tractors.
• Cat components and systems recommending multipurpose tractor fluid that
meet Ford/New Holland M2C134D specification.
• Most Cat Hydraulic Systems.
Equipment Fluids
• Cat MTO is developed, tested and approved by Caterpillar to meet the same high
• Improved Braking and Clutching — Where approved for use, enhances control
and extends life in clutches and wet brakes.
• Lower Maintenance Costs — Exceptional anti-wear properties extend
equipment and component lives.
• Cold-Weather Operation — Can be used in temperatures as low as -13° F (-25° C).
• Simplified Maintenance — Can be used in multiple compartments, reducing
inventory and the chance of using the wrong oil.
• Long-Lasting Performance — Offers high thermal stability and oxidation
resistance for long service life in severe applications.
(Continued)
5-30
Special Application Oils Oils
2926571
Cat® MTO (Continued)
OEM Compatibility
Cat MTO meets the following OEM specifications {A}:
API GL-4
CNH MAT3525
Ford New Holland FNHA-2-C-201
Kubota UDT
Volvo WB 101/BM
Cat MTO can be substituted in applications that require the following:
AGCO Powerfluid 821 XL
Allison C4 (Agriculture Applications Only)
Denison HF-0/HF-1/HF-2 (T5D & P46)
Ford ESN-M2C 134 D
JI Case MS 1204-07/09
John Deere JMD J20C
Massey Ferguson MF 1135/1141
Vickers 35VQ25
Typical Characteristics {B}
Gravity API (ASTM D287) 28.6
Viscosity Brookfield, cP at -20° C 4,300
Equipment Fluids
Zinc, % wt. 0.15 min.
{A} Cat MTO does not meet Cat TO-4 or FD-1 and should not be used in compartments that specify TO-4 or FD-1 oil.
{B} The values shown are typical values and should not be used as quality control parameters to either accept or reject product.

5 -- 105-3335 -- 19 112-9183
55 -- 105-3334 -- 20 109-4395
Bulk -- 155-6218 -- 200 126-2700
-- 5 172-6894 -- 205 138-4271
-- 18 135-3189 -- 208 120-5286
-- Bulk 105-3333
5-31
Oils Special Application Oils
2926607
Brake Fluid
• Meets DOT and SAE requirements
DOT 3
• Use where DOT 3 brake fluid is specified by service manual or operators guide
• Loaders, lift trucks, and service trucks
DOT 5
• DOT 5 is for extreme service conditions where higher than normal temperatures
will be encountered or where moisture absorption is a problem
• High performance cars and off-road vehicles
Part Number Qty. Size

DOT 3
4C-5585 12 0.94 L (1 qt)
4C-5586 4 3.79 L (1 gal)
DOT 5
4C-5588 12 0.94 L (1 qt)
2926634
Governor Oil
Model: 3600 Engine
Equipment Fluids
• For 3600 Engine Woodward Governor

136-9642 1 0.95 L
5-32
Additives Oils
2926652
Cat® Axle and Brake Oil Additive
English Volume (qt) Metric Volume (L) Part Number
1 qt. -- 197-0017
2926665
Oil Stabilizer
• Reduces oil consumption
• Reduces engine wear
• Helps keep vital engine parts clean
• Reduces thermal oil and viscosity breakdown
This product should only be used as needed in the following engines:

Engine Model Engine Serial No.
3406E 5EK1-Up, 5DS1-Up, 6TS1-Up, 1LW1-Up,
2WS1-Up, 1MM1-Up, 4AS1-Up
Equipment Fluids
C-15 6NZ1-82494
C-16 7CZ1-Up

143-3655 12 0.94 L
2926683
Hydraulic Oil Additive
• Low friction additive for some hydraulic systems
• Relieves “stick-slip” on noisy hydraulic cylinders
• Not for use on machines which have a common sump for hydraulics, brake,
and transmissions
Part Number Size Qty.

1U-9891 0.95 L (1 qt) bottle 12
5-33
Coolants Coolants
2926706
Health and Safety
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin
or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS)
2926714
Cat® ELC™
Recommended Use
• Cat ELC meets or exceeds the requirements of the following specifications
and guidelines:
• Cat EC-1
• ASTM D-3306
• ASTM D-6210
• TMC RP-329
• TMC RP-338
• SAE J1034
• Cat ELC is developed, tested and approved by Caterpillar to meet the same high
• Factory-Fill — Used as standard factory-fill for all Cat machine cooling systems.
• Lower Maintenance Costs — Reduces engine coolant and additive costs by as
much as 500% compared to conventional coolants. Cat ELC eliminates the need
for supplemental coolant additives, extends coolant change-out intervals and
reduces disposal requirements.
• Advanced Metal Protection — Incorporates an advanced formula technology
with organic acid additive corrosion inhibitors, such as a combination of mono
Equipment Fluids
and dicarboxylates for maximum protection of copper, solder, brass, steel,

cast iron and aluminum.

Color Strawberry Red
Boiling protection with 15 psi (1 bar) radiator cap
50% Cat ELC/50% water 129° C (265° F)
60% Cat ELC/40% water (ELC concentrate added) 132° C (270° F)
Freezing protection
50% Cat ELC/50% water -37° C (-34° F)
60% Cat ELC/40% water (ELC concentrate added) -52° C (-62° F)
Nitrite (50% solution) 500 ppm
Molybdate (50% solution) 530 ppm
(Continued)
5-34
Coolants Coolants
2926714
Cat® ELC™ (Continued)
English Volume (gal) Metric Volume (L) Part Number Distribution Region
Cat ELC Concentrate (with embitterment)
-- 4 365-8394 Asia Pacific
-- 5 205-6615 Europe, Africa, Middle East
1 -- 238-8647 North America and Latin America excluding Brazil
Cat ELC Premix 50/50 (with embitterment)
-- 200 365-8397 Asia Pacific
-- 1000 365-8398 Asia Pacific
-- 200 215-4242 Brazil
-- 5 215-4245 Brazil
-- 20 215-4246 Brazil
2926762
Equipment Fluids
Cat® ELI
Recommended Use
• Inhibitor concentrate based on Cat® ELC technology
• For use in generator sets, industrial engines and marine engines that do not require freeze protection
• Corrosion protection, like Cat ELC, only without glycol
• Extended drain interval and little maintenance makes an excellent alternative to conventional supplement coolant additives
with water
• Lower total owning and operating costs compared to water and SCA because of the extended drain interval and limited
maintenance of Cat ELC
Cat ELI Concentrate
1 -- 351-9431 Worldwide except Europe, Africa, Middle East
-- 1000 366-2753 Latin America, Australia and North America
-- 20 351-9432 Worldwide except Europe, Africa, Middle East
-- 208 351-9433 Worldwide except Europe, Africa, Middle East
5-35
Coolants Coolants
2926782
Cat® DEAC™
Recommended Use
• Cat DEAC is approved for use in all Cat machines, commercial engine and
truck engine applications and most diesel, gas or natural gas engines made
by other manufacturers.
• Cat DEAC meets the following ASTM standards:
• ASTM D6210 (Heavy-duty antifreeze/coolants)
• ASTM D3306 (Automotive applications)
• ASTM D1384 (Glassware corrosion test)
• Cat DEAC is developed, tested and approved by Caterpillar to meet the same
• Excellent Performance — Contains organic and inorganic corrosion inhibiting
and antifoam additives, and provides superior protection against pitting,
corrosion and freezing down to -37° C (-34° F).
• Convenience — Fully formulated, no pre-mixing with supplemental coolant
additive required at initial fill. Concentrate available in 1 gallon, 20 liter, and
55 gallon containers for top off.

Color Magenta
Boiling protection °C (°F) 15 psi pressure cap (ASTM D1177)
50% Cat DEAC/50% water 129 (265)
60% Cat DEAC/40% water (maximum) 132 (270)
Freezing protection °C (°F)
Equipment Fluids
50% Cat DEAC/50% water -37 (-34)

60% Cat DEAC/40% water (maximum) -52 (-62)
Silicon concentrate (in the form of Silicates) 240 ppm
Ethylene Glycol (% volume) 95.2% min.
Cat DEAC — Concentrate with Embitterment
5 20 339-3770 North America and Latin America
excluding Brazil
55 -- 339-3769 North America and Latin America
excluding Brazil
-- Bulk 339-3771 North America and Latin America
excluding Brazil
-- 200 365-2713 Asia Pacific
5-36
Coolants Coolants
2926817
Cat® NGEC™
Recommended Use
• Cat NGEC Premix 50/50 is a heavy-duty cooling system fluid especially designed
to provide superior protection against pitting, freezing, and corrosion in Cat
natural gas engines or natural gas engines made by other manufacturers.
• Cat NGEC meets the following ASTM standards:
• ASTM D6210 (Heavy-duty antifreeze/coolants)
• ASTM D3306 (Automotive applications)
• ASTM D1384 (Glassware corrosion test)
• Cat NGEC is developed, tested and approved by Caterpillar to meet the same
• Fully Formulated — Does not require an initial supplemental cooling additive.
• Quick, easy servicing.
• Superior Protection — Contains both organic and inorganic corrosion inhibitors
as well as antifoam additives. It provides superior protection against pitting,
corrosion and freezing down to -37° C (-34° F).

Color Purple
Boiling protection with 15 psi pressure cap °C (°F) (ASTM D1177)
50% Cat NGE/50% water 265 (129)
60% Cat NGEC/40% water (concentrate added) 270 (132)
Freezing protection °C (°F)
50% Cat NGEC/50% water -34 (-37)
Equipment Fluids
60% Cat NGEC/40% water (maximum) -62 (-52)
Ash content, % wt. (ASTM D1119) 0.60
Silicon concentrate (in the form of Silicates) 120 ppm
Ethylene Glycol (% volume) 45.3
Cat NGEC Premix 50/50 with Embitterment
-- 200 366-2716 Asia Pacific
-- 1000 339-3766 Australia
excluding Brazil
excluding Brazil
excluding Brazil
excluding Brazil
5-37
Coolants Cooling System Cleaners
2926857
Cooling System Cleaner — Standard
Applications
• Cooling system cleaner; full effect after several weeks in the cooling system.
• Not for use in removing large amounts of oil from cooling systems.
Features
• Removes scale or lime deposits.
Benefits
• Cleans cooling system while the machine works.
English Metric
Volume Volume
(gal) (L) Part Number Distribution Region
0.500 (2 qt.) -- 6V-4511 North America
-- 1.89 185-5121 Europe, Africa, Middle East
2926878
Cooling System Cleaner — Quick Flush
Applications
• For use as preventative maintenance or as a short-time flush at the time
of coolant change.
• Not for use in removing large amounts of oil from cooling systems.
Features
• Removes lime deposits, scale and solder bloom.
Benefits
• Allows for one-step cleaning in just 90 minutes.
Equipment Fluids

0.125 (1 pt.) -- 4C-4609
0.250 (1 qt.) -- 4C-4610
1 -- 4C-4611
5 -- 4C-4612
55 -- 4C-4613
5-38
Coolant Tools Coolants
2926905
275 Gallon Tote Ball Valve Dispensing Tool
To dispense coolant from 275-gallon totes, a new ball valve dispensing tool has been
added to the Cat product line-up. It was designed specifically to dispense coolant
from disposable totes.
The tote dispensing tool is easy to use, and instructions are included with each
tool group. Also included are toll-free 800 numbers to receive assistance from an
experienced professional on the ball valve tool, plus other accessories that may be
useful per your specific installation.
The valve group should last for several years, but the cutting tool may dull,
necessitating the replacement of the cutting tool only.
Part Number Description

232-4452 Ball Valve Group
Group Consists of:
232-4451 Ball Valve Assembly
232-4450 Cutting Tool
239-5289 Buttress Nipple
2926918
Cooling Conditioner Test Kit
Applications
• Simple dip test takes just minutes to perform. Measures coolant nitrite levels.
• Use on coolants containing nitrites (for measuring nitrite levels)
Features
• Does not require dilution, titration or drops to count.
Equipment Fluids
Benefits
• Includes a color density change for people with color blindness.
Product Part Number

Coolant Conditioner Test Kit (100 test strips, sample, bottle, pipette) 4C-9301
Refill test strips 4C-9297
5-39
Coolants Coolant Tools
2926938 2926938
Battery and Coolant Refractometer
• Used to measure freezing point of coolants plus battery charge condition.
• Refractometer uses a prism and lens with simple focus adjustment to provide
accurate and repeatable measurements on easy to read scales.
• Easy to operate.
• Automatic temperature compensation (ATC).
• Requires only 2 to 3 drops of solution.
• Carrying case and calibration screwdriver included.
• Reads degrees Centigrade and Fahrenheit.
Range Resolution
-60 to 32° F propylene glycol freeze point 10° F
-50 to 0° C ethylene glycol freeze point 5° C
1.15 to 1.30 specific gravity of battery acid 0.01
Product Part Number

Battery and Coolant Refractometer 245-5829
2926958
Battery, Coolant and Diesel Exhaust Fluid Refractometer
• Digital refractometer is simple to use and to read
• Used for measuring concentration levels for multiple fluids including ethylene
glycol-based coolants such as Cat ELC and Cat DEAC, propylene glycol-based
coolants, Cat ELI and battery charge condition
Equipment Fluids
• Tool operating manual provides conversion for concentration of coolant glycol

level to corresponding freeze protection level
• Automatic temperature compensation
• Requires only a few drops of fluid
• Case and cleaning cloth included
Product Part Number

Test Kit, Brix Refractometer 360-0774
5-40
Additives Coolants
2926978
Cat® ELC Extender
Recommended Use
• Protects against cylinder liner/block pitting and cavitation erosion
• Should be added to Cat ELC at 500,000 km (300,000 miles) for Cat powered
on-highway trucks and 6,000 hours for commercial engines
• Extender is typically necessary only once during the life of the coolant
• Ensures Cat ELC performance to 1,000,000 km (600,000 miles) or 12,000 hours
ELC Extender and Flush Intervals
Cat ELC Extender should be added after 6,000 hours or 300,000 miles (500,000 km)
of operation, and the system should be drained and flushed with clean water after
12,000 hours or 600,000 miles (1,000,000 km). No cleaning agents are needed.
Cat ELC Extender
>0.250 (1 qt.) -- 119-5152 --
1 -- 210-0786 --
-- 1 215-4241 Brazil
-- 5 219-3039 Brazil
2927003
Cat® SCA
Equipment Fluids
Application
• For regular maintenance use with Cat DEAC and other heavy duty diesel engine coolants
requiring maintenance with SCA.
• For use in water-based cooling systems, such as marine applications that do not require
glycol for antifreeze protection.
• Use for initial does in non-fully formulated (ASTM D4985) engine coolants.
Features
• Helps stop rust and mineral deposits from forming in the cooling system.
Benefits
• Protects all metals.
• Protects against cylinder liner cavitation and corrosion.
• Will not affect gaskets or hoses.

Cat SCA Cat SCA (Continued)
0.063 (1/2 pt.) -- 6V-3542 55 -- 5P-2907
0.125 (1 pt.) -- 8T-1589 -- 1 217-0616
0.250 (1 qt.) -- 3P-2044 -- 20 217-0617
5 -- 8C-3680 -- 208 217-0618
5-41
Greases
2927039
Health and Safety
Cat Grease is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat parts.
Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye,
skin or respiratory irritation. Always observe good hygiene measures. Read and understand the Material Safety Data Sheet (MSDS)
2927047
Cat® Multipurpose Grease
Recommended Use
• Cat Multipurpose Grease is recommended for use in low-load, low-speed applications
and ambient temperatures ranging from -30° to 40° C (-22° to 104° F).
• Reduced Component Wear — Resists softening and protects parts from wear.
• Corrosion Protection — Resists oxidation and protects metal against rust. Will not corrode
or damage steel, copper bearing alloys or conventional seal materials.
• Excellent General Purpose — Lithium complex grease for applications where load, speed,
temperature and moisture conditions are low.

NGLI # 2
Ambient Range -30° to +40° C (-22° to +104° F)
Operating Range -32° to +149° C (-25° to +300° F)
Base Fluid Type Petroleum
Thickener Type Lithium Complex
Color Blue
Equipment Fluids
% Molybdenum disulfide 0
Worked Penetration (mm) 265-295
% Change/100,000 stroke -5 to +15
Roll Stability w/H2O, % change N/A
Viscosity Index, Min N/A
Viscosity @ 100° C, cSt 19.5-22.5
Viscosity @ 40° C, cSt 230-245
4 Ball Wear (mm) Max, Typ. 0.75
4 Ball E.P. Weld Point (kg) Min. 315
Timken E.P. Test OK load (lb) Typ. 55 Min
Oxidation-psi drop/500 hr Max N/A
Rust Test Pass
Copper Corrosion 1b
Dropping Point +260° C (+500° F)
{A} The values shown below are typical values and should not be used as quality control parameters
to either accept or reject product. Specifications are subject to change without notice.
English Volume (lb) Metric Volume (kg) Part Number English Volume (lb) Metric Volume (kg) Part Number
NLGI Grade #2 NLGI Grade #2 (Continued)
14 oz (cartridge) 397 g (cartridge) 1P-0808 400 (drum) 181 (drum) 7X-7665
15.9 oz (cartridge) 450 g (cartridge) 129-1950 1 3500 (tote) 1588 (tote) 129-1921
35 (metal pail) 16 (metal pail) 129-1919 14 oz (cartridge) -- 324-8141 2
35 (plastic pail) 16 (plastic pail) 7X-7664 35 lb (plastic pail) -- 324-8142 2
120 (keg) 54 (keg) 9X-6488 400 lb (drum) -- 324-8143 2
1
Australia use
2
China only
5-42
Greases
2927074
Cat® Advanced 3Moly Grease
Recommended Use
• Cat Advanced 3Moly Grease is recommended for use in medium-load and medium-speed
applications with ambient temperatures ranging from -20° to 40° C (-4° to 104° F).
• Long Life — Lithium Complex formula enhanced with 3% molybdenum disulfide (moly),
Cat Advanced 3Moly Grease is an excellent grease for applications where speed,
load and temperature are moderate and moisture is low.
• Reduced Component Wear — Resists softening and protects parts from wear.
• Corrosion Protection — Resists oxidation and protects metal against rust. Will not
corrode or damage steel, copper bearing alloys or conventional seal materials.

NGLI # 2
Thickener Type Lithium Complex
Color Gray
% Change/100,000 stroke 10 Max
Equipment Fluids
Viscosity @ 100° C, cSt 22
Timken E.P. Test OK load (lb) Typ. 55 Min
Oxidation-psi drop/500 hr Max N/A
Rust Test Pass
Salt Fog Test, hours N/A
Copper Corrosion 1b
{A} The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.
NLGI Grade #2 (3% Moly) NLGI Grade #2 (3% Moly) (Continued)
120 (keg) 54 (keg) 9X-6489 35 (plastic pail) 16 (plastic pail) 7X-7699
14 oz (cartridge) 397 g (cartridge) 5P-0960 35 lb (plastic pail) -- 324-8139 1
14 oz (cartridge) -- 324-8140 1 3500 (tote) 1588 (tote) 129-1926
15.9 oz (cartridge) 450 g (cartridge) 129-1952 2 400 (drum) 181 (drum) 7X-7701
35 (metal pail) 16 (metal pail) 129-1924 400 lb (drum) -- 324-8138 1
1
China only
2
Australia use
5-43
Greases
2927101
Cat® Ultra 5Moly Grease
Recommended Use
• Cat Ultra 5Moly Grease is formulated for use in high-load and high-speed applications with
ambient temperatures ranging from -35° to 40° C (-31° to 104° F) for NLGI #1, -30° to 50° C
(-22° to 122° F) for NLGI #2, and -40° C to 36° C (40° F to 95° F) for NLGI #0.
• Moisture Resistance — Resists washout from fresh and salt water.
• Long Life — High-quality Calcium Sulfonate Complex formula with 5% molybdenum
disulfide (moly) provides long service life in Cat applications.
• Reduced Component Wear — Resists softening and continues to protect parts under
extreme loads and high speeds.
• Low Environmental Risk — Formulated to use no lead, antimony, zinc, barium, chlorine,
phosphorus or free sulfur.

NGLI # 0 1 2
Equipment Fluids
Ambient Range -40° to +35° C -35° to +40° C -30° to +50° C

(-40° to +95° F) (-31° to +104° F) (-22° to +122° F)
Operating Range -45° to +149° C -40° to +149° C -32° to +149° C
(-49° to +300° F) (-40° to +300° F) (-25° to +300° F)
Base Fluid Type Petroleum Petroleum Petroleum
Thickener Type Calcium Sulfonate Complex Calcium Sulfonate Complex Calcium Sulfonate Complex
Color Gray Gray Gray
% Molybdenum disulfide 5 5 5
Worked Penetration (mm) 355-385 310-340 265-295
% Change/100,000 stroke ±5 ±5 ±5
Roll Stability w/H2O, % change ±5 ±5 ±5
Viscosity Index, Min N/A N/A N/A
Viscosity @ 100° C, cSt 7 11.5 11.5
Viscosity @ 40° C, cSt 64 150 150
4 Ball Wear (mm) Max, Typ. 0.5 0.5 0.5
4 Ball E.P. Weld Point (kg) Min. 620 620 620
Timken E.P. Test OK load (lb) Typ. 60 60 60
Oxidation-psi drop/500 hr Max N/A N/A N/A
Rust Test Pass Pass Pass
Salt Fog Test, hours +4,000 +4,000 +4,000
Copper Corrosion 1a 1a 1a
Dropping Point +288° C (+550° F) +288° C (+550° F) +288° C (+550° F)
(Continued)
5-44
Greases
2927101
Cat® Ultra 5Moly Grease (Continued)
2000 lb 907 kg 344-4001 400 (drum) 181 (drum) 161-0971
(disposable tote) NLGI Grade #2
3500 (tote) 1588 (tote) 206-7411 120 (keg) 54 (keg) 183-3427
400 (drum) 181 (drum) 206-7406 14 oz (cartridge) 397 g (cartridge) 183-3424
NLGI Grade #1 15.9 oz (cartridge) 450 g (cartridge) 183-3425 1
120 (keg) 54 (keg) 161-0970 2000 lb 907 kg 344-3999
14 oz (cartridge) 397 g (cartridge) 161-9203 (disposable tote)
15.9 oz (cartridge) 450 g (cartridge) 197-9227 1 35 (metal pail) 16 (metal pail) 266-8563 1
2000 lb 907 kg 344-4000 35 (plastic pail) 16 (plastic pail) 183-3426
(disposable tote) 3500 (tote) 1588 (tote) 183-3429
35 (metal pail) 16 (metal pail) 266-8562 1 400 (drum) 181 (drum) 183-3428
35 (plastic pail) 16 (plastic pail) 183-3432
3500 (tote) 1588 (tote) 266-8564
1
Australia use
2927141
Cat® Desert Gold Grease
Recommended Use
• Cat Desert Gold Grease is recommended for use in all load and speed applications
and ambient temperature ranges of -20° to 60° C (-4° to 140° F).
Equipment Fluids
• Extreme Heat Operation — Performs and protects where ambient temperatures
are regularly above 32° C (90° F).
• Extreme Life — High-quality Calcium Sulfonate Complex synthetic base with 5%
molybdenum disulfide (moly) delivers unmatched performance in Cat applications.
• Low Environmental Risk — Is formulated not to contain lead, antimony, zinc, barium,
chlorine, phosphorus or free sulfur.
(Continued)
5-45
Greases
2927141
Cat® Desert Gold Grease (Continued)
NGLI # 2
Operating Range -23° to +2320° C (-10° to +4,500° F)
Base Fluid Type Synthetic
Thickener Type Calcium Sulfonate Complex
Color Gold
% Change/100,000 stroke ±1
Roll Stability w/H2O, % change ±1
Viscosity Index, Min 125
Timken E.P. Test OK load (lb) Typ. 65
Oxidation-psi drop/500 hr Max 5
Rust Test Pass
Salt Fog Test, hours +1,100
Copper Corrosion 1a
Equipment Fluids

14 oz (cartridge) 397 g (cartridge) 129-1938 35 (plastic pail) 16 (plastic pail) 129-1941
15.9 oz (cartridge) 450 g (cartridge) 129-1937 1 120 (keg) 54 (keg) 129-1943
35 (metal pail) 16 (metal pail) 129-1942 400 (drum) 181 (drum) 129-1944
3500 (tote) 1588 (tote) 129-1946
1
Australia use
5-46
Greases
2927171
Cat® Arctic Platinum Grease
Recommended Use
• Cat Arctic Platinum Grease is recommended for use in all load and speed applications
and ambient temperature ranges of -50° to 20° C (-58° to 68° F).
• Extreme-Cold Operation — Performs and protects where ambient temperatures
are regularly below 0° F.
• Extreme Life — High-quality Calcium Sulfonate Complex synthetic base with 5%
molybdenum disulfide (moly) delivers unmatched performance in Cat applications.
• Low Environmental Risk — Is formulated not to contain lead, antimony, zinc, barium,
chlorine, phosphorus or free sulfur.

NGLI # 0
Base Fluid Type Synthetic
Thickener Type Calcium Sulfonate Complex
Color Platinum
Equipment Fluids
Roll Stability w/H2O, % change ±5
Timken E.P. Test OK load (lb) Typ. 65
Rust Test Pass
Salt Fog Test, hours N/A
Copper Corrosion 1a
{A} The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.
35 (plastic pail) 16 (plastic pail) 129-8708 14 oz (cartridge) 397 g (cartridge) 341-0726
120 (keg) 54 (keg) 129-8709 2000 (tote) 907 (tote) 344-4002
400 (drum) 181 (drum) 129-8710
5-47
Greases
2927197
Cat® High Speed Ball Bearing Grease
Recommended Use
• Electric motors, fan drives, starters, alternators, generators
• It can also be used in automotive and industrial applications, especially where equipment is operated intermittently
in severe conditions.
• Formulated with synthetic thickener and corrosion inhibitors, High Speed Ball Bearing Grease provides excellent lubrication
in ball and roller bearings operating over a broad temperature range.
• High-Stress Performance — Provides outstanding protection at high speeds (10,000 rpm and greater) and the high
temperatures (163° C/325° F) associated with high speeds.
• Moisture Resistance — Resists wash out from fresh and salt water.
• Increased Component Life — Heat resistance provides improved protection, reducing component wear rates.
• Low-Temperature Operation — Remains mobile in temperatures as low as -30° C (-22° F).

NGLI # 2
Thickener Type Polyurea
Color Blue-Green
Equipment Fluids

4 Ball Wear (mm) Max, Typ. N/A
4 Ball E.P. Weld Point (kg) Min. N/A
Timken E.P. Test OK load (lb) Typ. N/A
Rust Test Pass
Copper Corrosion 1a

NLGI #2
14 oz (cartridge) 397 g (cartridge) 2S-3230
5-48
Greases
2927221
White Assembly Grease
Applications
• For use in general assembly and other light-duty applications.
Features
• Added tackifiers, making it ideal for holding gears, bearings, gaskets and other parts during assembly.
• Contains no molybdenum disulfide.
Benefits
• Exceptional general purpose Lithium Complex grease.
NLGI #0
10 oz (tube) 254 g (tube) 266-9682
NLGI #2
14 oz (cartridge) 397 g (cartridge) 129-1966
2927246
Cat® Hammer Paste
Cat® Hydraulic Hammer Paste (Grease) is formulated to lower friction and improve
tool and bushing life in the harsh environments encountered with hydraulic impact
hammer applications. These work tools generate high heat, severe shock, and heavy
friction loads, which can fuse parts together. Cat Hydraulic Hammer Paste is made
from copper and graphite to provide excellent wear protection even at temperatures
higher than 2,000° F (1093° C).
Performance
Equipment Fluids
• Formulated for extreme temperatures and applications
• Strong adhesion, even in the presence of water
Protection
• Significantly slows wear
• Prevents seizing
• Extremely stable and corrosion resistant

Color Copper
NLGI Class 2
Thicker Type Aluminum Complex
Base Oil Type Mineral
Operating Range -20 to 1100° C (-4 to 2,012° F)
4 Ball E.P. Weld Point (kg) 400
Dropping Point 260° C (500° F)
{A} The values shown are typical values and should not be used as quality control parameters

NLGI #2
11 lb (tub) 5 kg (tub) 133-8807
-- 400 g (auto lube cartridge) 317-8491
-- 12 pack (auto lube cartridge) 317-8492
5-49
Greases
2927270
High Vacuum Grease
• Applications where maintaining a seal under vacuum or pressure is required.

Ultra Synthetic Generator Grease

• Clay-thickened, synthetic based oil, multi-service grease.
• Provides low temperature breakaway performance.

2927285
NLGI #1.5
Equipment Fluids
2927303
Cat Multipurpose Marine Grease
Recommended Use
• Cat Multipurpose Marine Grease is recommended for use in medium load and
high speed applications and ambient temperature ranges of -30° to 175° C
(-22° to 347° F).
• Long Life — High quality Calcium Sulfonate Complex base delivers unmatched
performance in marine applications.
• Reduced Component Wear — Resists softening and continues to protect
parts under medium loads and high speeds.
• Corrosion Protection — Resists oxidation and protects metal against rust.
Will not corrode or damage steel, copper bearing alloys or conventional
seal materials.
• Low Environmental Risk — Is formulated not to contain lead, antimony, zinc,
barium, chlorine, phosphorus or free sulfur.
(Continued)
5-50
Greases
2927303
Cat Multipurpose Marine Grease (Continued)
Color Blue Green
NLGI Grade 2
Thickener Overbased Calcium Sulfonate
Base Oil Petroleum
Operating Range -30° to -175° C (-22° to 347° F)
Viscosity CST @ 40° C 110
Viscosity CST @ 100° C 12
Penetration Worked 60 Strokes 265-295
% Change/10,000 Stroke ±2
% Change/100,000 Stroke ±5
Oil Separation 24 Hrs @ (77° F) 0.25
Roll Stability Penetration w/H2O, % change ±1
4 Ball Wear Test (mm) Scar (kg) 40
4 Ball E.P. Test Weld Point (kg) 500
Load Wear Index (kg) 65
Timken E.P. Test OK Load (lb) Typ. 65
Rust Test Pass
Water Washout @ 79° C (175° F), % loss 275
Equipment Fluids
Wheel Bearing Leakage Grams Modified @ 163° C (325° F) 0.4
Dropping Point 298° C (570° F)
{A} Values shown are typical values and should not be used as quality control parameters to either accept or reject product.
English Volume (lb) Metric Volume (kg) Part Number

5-51
Equipment Fluids
5-52

Untitled

Uploaded by

Copyright:

Available Formats

Untitled

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Untitled

Uploaded by

Copyright:

Available Formats

EQUIPMENT FLUIDS

Oils Diesel Engine Oil

with ACERT Technology to ensure excellent engine life and performance.

Zinc, % wt. 0.146 0.146 0.146 0.146 0.133 0.133 0.123

English Volume Metric Volume English Volume Metric Volume

English Volume Metric Volume English Volume Metric Volume

English Volume Metric Volume English Volume Metric Volume

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

Viscosity cSt @ 100° C (ASTM D445) 13.5

English Volume Metric Volume English Volume Metric Volume

Cat® NGEO EL250™

English Volume (gal) Metric Volume (L) Part Number

Typical Characteristics {A}

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

English Volume (gal) Metric Volume (L) Part Number

Cat Bio Hydo Advanced

Cat HYDO Advanced 10 represents a significant performance breakthrough in hydraulic oil

cSt @ 100° C (ASTM D445) 6.7 6.3 8.0 --

Viscosity Index 114 105 146 --

FZG Gear Test DIN 51534, 12 12 11 --

35VQ25 Vickers Total 33 mg 40-90 mg <90 mg --

Pumping @ -30° C mPaS 15,000 Varies Varies --

Zinc, % wt. (ASTM D4951) 0.090 Varies <0.040 --

Copper Strip Corrosion 1A @ 150° C 1A @ 100° C 1A @ 100° C Corrosion protection

Cleanliness No interference with Interferes with optical Varies Accurate contamination

Typical Characteristics {A}

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

Brookfield Viscosity (ASTM D2983)

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

Viscosity cSt @ 100° C (ASTM D445) 31.6

English Volume Metric Volume English Volume Metric Volume

Typical Characteristics {A}

English Volume Metric Volume English Volume Metric Volume

English Volume (gal) Metric Volume (L) Part Number

Part Number EAME Part Number Qty. Size

English Volume Metric Volume English Volume Metric Volume

Part Number Qty. Size

• For 3600 Engine Woodward Governor

Part Number Qty. Size

This product should only be used as needed in the following engines:

Part Number Qty. Size

Part Number Size Qty.

and dicarboxylates for maximum protection of copper, solder, brass, steel,

Typical Characteristics {A}

Typical Characteristics {A}

50% Cat DEAC/50% water -37 (-34)

Typical Characteristics {A}

English Volume (gal) Metric Volume (L) Part Number

Part Number Description

Product Part Number