LH14

Output Ratings
Generating Set Model LH14
380-415V, 50 Hz 14.0 kVA

11.2 kW
Ratings at 0.8 pf

Technical Data
Engine Make & Model Lister Petter Ltd. LPW2
Alternator Model LA1012D
Base Frame Type Heavy Duty Fabricated Steel

Circuit Breaker Type/Rating 3 Pole MCB

Frequency 50 Hz
Engine Speed 3000
Fuel Tank Capacity: Litres (US Gal) 44 (11.6)
Fuel Consump, LH14: l/hr (US Gal/hr) 3.3 (0.9)

abcde
FG Wilson (Engineering) Ltd
Old Glenarm Road, Larne, County Antrim BT40 1EJ
Northern Ireland, United Kingdom
Tel: +44 (0) 28 2826 1000 Fax: +44 (0) 28 2826 1111
www.FGWilson.com
LH14

Engine Technical Data

Physical Data Air System 50 Hz

Manufacturer: Lister Petter Ltd Air Filter Type: Replaceable Element

Model: LPW2 Combustion Air Flow:
No. of Cylinders/Alignment: 2 in line m3min (cfm) 1.32 (46.6)
Cycle: 4 Stroke Max. Combustion Air Intake
Induction: Natural Restriction: kPa (in H2O) 2.5 (10)
Cooling Method: Water Radiator Cooling
Governing Type: Mechanical Airflow: m /min (cfm)
3
58.8 (2076)
Class: ISO 8528 G2 External Restriction to
Compression Ratio: 18.5:1 Cooling Airflow: Pa (in Wg) 51 (0.20)
Displacement: L (cu.in) 0.93 (56.8)
Bore/Stroke: mm (in) 86 (3.39) / 80 (3.15)
Moment of Inertia: kg m (lb/in )
2 2
0.25 (355.6) Cooling System 50 Hz
Engine Electrical System:
Cooling System
-Voltage/Ground 12/Negative
Capacity: L (US Gal) 6.4 (1.7)
-Battery Charger Amps 35
Water Pump Type: Centrifugal
Weight: kg (lbs) -Dry 128.2 (282.7)
Heat Rejected to Water &
-Wet 138.0 (304.3)
Lube Oil: kW (Btu/min) 12.6 (717)
Heat Radiation to Room:
kW (Btu/min) 7.9 (449)
Performance 50Hz Radiator Fan Load: kW (hp) 0.5 (0.6)
Engine Speed: rpm 3000

Gross Engine Power:

kW (hp) 14.8 (19.9)

BMEP: kPa (psi) 641 (93.0) Lubrication System

Oil Filter Type: Spin-On, Full Flow

Total Oil Capacity L (US Gal): 3.2 (0.9)
Oil Pan L (US Gal): 3.0 (0.8)
Oil Type: API CD 15W-40
Cooling Method: Water with 40% antifreeze
Fuel System

Fuel Filter Type: Replaceable Element

Recommended Fuel: Class 2 Diesel Exhaust System 50 Hz

Silencer Type: Industrial

Fuel Consumption: L/hr (US Gal/hr)
Silencer Qty: 1
Pressure Drop Across
Silencer System: kPa (in Hg) tba
100% 75% 50% Silencer Noise Reduction
Load Load Load Level: dB tba
LH14
Max. Allowable Back
50 Hz 3.3 (0.9) 2.7 (0.7) 2.1 (0.6)
Pressure: kPa (in Hg) 7.5 (2.2)
Exhaust Gas Flow:
m3min (cfm) 3.6 (128)
Exhaust Gas Temperature:
°C (°F) 572 (1062)
(based on diesel fuel with a specific gravity of 0.85 and
conforming to BS2869, class 2)

2
 LH14

Alternator Performance Data

50 Hz
Data Item
415/240 400/230 380/220

Reactances:
Per Unit

Xd 3.38 3.63 4.00

X’d 0.132 0.142 0.156

X”d 0.065 0.071 0.078

Alternator Technical Data

Physical Data Operating Data

Manufacturer: FG Wilson Overspeed: RPM 4500

Model: LA1012D Voltage Regulation (steady state) ±0.5%

No. of Bearings: Single Wave Form NEMA =TIF <50

Insulation Class: H Wave Form IEC=THF <2%

Winding Pitch Code: 2/3 No. 6 Total Harmonic Content LL/LN <4%
Suppression is in line with British Standard
Wires: 12 Radio Interference BSEN50081 & BSEN50082

Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)

Excitation System: Shunt -50 Hz 3.3 (188)

AVR Model: R230

3
LH14

Technical Data
3 Phase Ratings and Performance at 50 Hz, 3000 RPM

Voltage Model: LH14

kVA kW
415/240 14.0 11.2
400/230 14.0 11.2
380/220 13.9 11.1

Definitions
Rating Standard Reference Conditions
These ratings are applicable for supplying continuous electrical power Note: Standard reference conditions 25˚C (77˚F) Air Inlet Temp,
(at variable load) in lieu of commercially purchased power. There is no 152.4m (500ft) A.S.L. 60% relative humidity. All engine performance
limitation to the annual hours of operation. data based on the above mentioned maximum continuous ratings.
Fuel consumption data at full load with diesel fuel with specific gravity
of 0.85 and conforming to BS2869: 1998, Class A2.

L W

Weights & Dimensions

Weights: kg (lbs) Dimensions: mm (in)
Net (+ lube oil) 325 (716) Length 1067 (42.0)
Wet (+ lube oil & coolant) 331 (730) Width 576 (22.7)
Fuel, lube oil & coolant 370 (817) Height 1198 (47.2)

General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment is guaranteed for a period of 12
manuals, circuit wiring diagrams, and BS5000, ISO 8528, months from date of commissioning or 18
commissioning/fault finding instruction ISO 3406, IEC 60034, VDE 0530, NEMA months from shipping, whichever occurs first.
leaflets. MG-1.22. Extended warranty terms are available.

FG Wilson is a fully accredited ISO9001

company.

279-429 In line with our policy of continuous product development, we reserve the right to change specification without notice. LH14/TECHDATA/FGW/0501