Zerust Axxanol™ 34CD ®

TECHNOLOGY That protects Metal From Corrosion

product information
Zerust® Axxanol™ 34CD is an easy-to-use, solvent-based corrosion preventive
coating that leaves a very light-oil film on the protected surface. During drying,
the solvent completely evaporates, leaving behind a harmless but powerful
corrosion preventative coating. End users, when handling parts, do not need
f e at u r e s to wear personal protection equipment such as a respirator, mask or safety
n Proven corrosion protection glasses. Only clean and lint free gloves are recommended to keep metals free of
n Easy-to-apply and remove corrosion and contaminants.
n Leaves a thin-oil film

n Improves lubricity Axxanol 34CD provides powerful corrosion protection against aggressive
environments such as salt air and high temperatures for multiple metal types
including iron and aluminum. Use to protect parts during program changeover
periods in the assembly process. Its thin coating does not interfere with torque
benefits or pull-out requirements of parts. After allowing metals to completely dry,
n Reduces corrosion incidents place into Zerust ICT®510-C VCI packaging products for a more robust solution
n Reduces need for rework that protects during ocean shipments and up to five years. The Axxanol 34CD
n Saves money & resources protective coating is safe, non-toxic and can be easily removed with an alkaline
n Comes with Zerust® cleaner.
global on-site support

A P P L I C ATI O N E X A M P L ES

Zerust Axxanol 34Cd protecting

Gears from corrosion during ocean
shipment from china to the usa
(shown in a dual protection system
with Zerust Ferrous Film).
Use Zerust Axxanol 34CD in
conjunction with Zerust VCI
packaging films for a more robust
corrosion protection system in
tough applications.

Cast Iron Parts dipped in Zerust

Axxanol 34CD for corrosion
protection prior to ocean shipment
from INDIA to germany.

C O RR O SI O N P R O TE C TI O N F O R :

NORMAL AGGRESSIVE EXTREME

ENVIRONMENT ENVIRONMENT ENVIRONMENT

A P P L I C ATI O N T Y P E
O R D ERIN G
INF O R M ATI O N
Directions for use:
n Availability/part number
1. Make sure parts are clean and dry.
5 Gallon Pail: 350-M-00012PL
2. Wear gloves when handling parts to avoid corrosion causing fingerprints.
55 Gallon Drum: 350-M-00012DR 3. Apply in a well ventilated area that is away from sources of heat or ignition.
4. Spray, brush or dip metal parts with Axxanol™ 34CD. Use a NIOSH approved
n Protection Type respirator when material is sprayed. In order to maintain “dry-to-touch” feel on
Protects ferrous and some non-
parts; Axxanol 34CD must be maintained at optimum concentration level during use.
ferrous metals including iron, steel,
5. Parts must be dry prior to packaging. Drying time is approximately 5 minutes; use
aluminum, zinc, copper and solder.
a fan to reduce drying time.
n Protection Life 6. Package parts using Zerust materials for added corrosion protection.
If properly applied, Axxanol 34CD will 7. Ship or store parts in protected storage.
protect metals for up to 6 months
under shelter. Removal:
Zerust® Axxanol 34CD can be easily removed by using any commercially available
n flash point alkaline cleaner. Always check with your customer to see if removal of Axxanol 34CD
91˚F (33˚C) is required prior to the use of the protected parts.

n Shelf life & Handling ICT®700 Series Overview: liquid additives & coatings
Shelf life of 2 years when stored in Protection Protection
Formulation Surface
Product Name Metals Protected Life Outdoors Life Indoors
original container, at 85° F (30° C) or Base Finish
(Up To)* (Up To)*
less and out of direct sunlight.
Water-Based Coatings and Additives
When stored over 1 year, agitate prior
Axxatec™ 77C Ferrous, aluminum, Not Thin, cloudy,
to use. (4% dilution) brass, zinc and copper recommended
4 months Water
visible
Axxatec 80C Not Dry to touch.
Ferrous 6 months Water
n disposal (2% dilution) recommended clear
Axxatec 80C Not Dry to touch.
Treat as petroleum waste. Dispose (7.5% dilution)
Ferrous
recommended
12 months Water
clear
of absorbed material at an approved
Ferrous, Aluminum, Not 6 months in a
disposal facility. Always consult Axxatec 8110 Water Thin, visible
Brass, Copper Recommended system
federal, state and local regulations. OIl-Based Coatings
Ferrous, aluminum, Not Oil with
Axxanol 33CD 6 months Dry to touch
QUESTIONS? brass, zinc and copper recommended solvents
Please contact a Customer Service Ferrous, aluminum, Not Oil with
Axxanol 34CD 6 months Very thin oil
brass, zinc and copper recommended solvents
Representative at +1 (763) 225-
Ferrous, aluminum, Not
6600 or email sales@zerust.com. Axxanol 33 8 months Oil Thin oil
brass, zinc and copper recommended
Ferrous, aluminum, Oil, VCI and
Axxanol 750-W 3 months 10 months Thin oil
brass, zinc and copper barrier
Ferrous, aluminum,
Axxanol 46-BIO 3 months 12 months Biobased Oil Thin oil
zinc
Ferrous, aluminum,
Axxanol Spray-G 12 months 24 months Grease Oily grease
brass, zinc and copper
Ferrous, aluminum, Light grease
Axxanol Z-Maxx LV 12 months 24 months Grease
brass, zinc and copper (NLGI 0)
Ferrous, aluminum, Thick grease
Axxanol Z-Maxx 12 months 24 months Grease
brass, zinc and copper (NLGI 2)
A product of:
N o r t h e r n Te c h n o l o g i e s * Indoor protection life results are rated for items stored indoors or under shelter in temperatures less than 100°F/38°C and in less than 70% relative
humidity. Use Zerust packaging products to extend protection life up to five years and beyond. Water-based product test results are per ASTM
International Corporation D2247 humidity chamber testing. Oil- and solvent-based product test results are per ASTM B117 salt spray testing.
4201 Woodland Road
P. O . B o x 6 9
Circle Pines, MN 55014
PH: +1 (763) 225-6600
FA X : + 1 ( 7 6 3 ) 2 2 5 - 6 6 4 5
EMAIL: sales@zerust.com Warranty and Disclaimer Information:
We guarantee our products conform to documented quality specifications. Product information subject to change without notice. We make no
W E B : w w w. z e r u s t . c o m warranty of any kind expressed or implied. All statements, technical information and recommendations contained herein are based on testing and
experiences NTIC believes to be reliable, but the accuracy or completeness thereof is not guaranteed. See www.zerust.com/warranty.

©2013 Northern Technologies International Corporation (NTIC). All Rights Reserved. NTIC is the owner of the following trademarks: NTI®, ZERUST®,
The ZERUST People®, ActivPak®, COR-SCI®, Cor-Tab®, Flange Saver®, ICT®, Plastabs®, Z-CIS® and the Color “Yellow”. EXCOR®, VALENO®, ABRIGO®
and UNICO® are registered trademarks of EXCOR GmbH, a Joint Venture Partner of NTIC
Rev F