STEEL VALVES

PLUG GATE GLOBE & CHECK

CLASS 150/300/600/800/1500/2500
Soudarshini Valve is exclusively committed to the manufacture of SERINO
Valves.The company is totally dedicated to only valve manufacture and no other
product. The company’s entire concentration is therefore on the reliability and
quality of Valves with the latest state of the art facilities, thereby producing the
finest possible product.
The Valves are manufactured and tested on sophisticated machinery and systems,
some of the latest facilities available are- Submerged ARC TIG MIG/MAG and
PTA welding systems, CNC machine, Lapping seat faces, for seat boring to ensure
better geometric reproduction and facilities for non-stop production process.
The company’s contribution has reached almost all Process industries viz
Petrochemical, Refinery, Fertilizer, Oil fields, Thermal Power, Steel plant and the
like thro’out the Country.
Profile:
SVPL is one of the foremost quality manufacturers of a wide range of Valves in the
Country.Today, with an experience of over 4 decades, SVPL has earned for itself a
reputation for Trust & Reliability
Customer Service:
The Company had earned a reputation for handling any Service requests
promptly and effectively. All products manufactured carry a guarantee of Full
after sales service either at the factory or by supplying required parts in a timely
and efficient manner.
Quality Assurance:
Serino has its own quality assurance dept, as also approved manuals related to
GATE, GLOBE, CHECK & PLUGValves
Quality is of primary concern to the company and strict measures have been
adhered to.The regular internal quality audit guarantees that the quality systems
is implemented at all stages from raw material to production, final tests and
delivery.
 Lubricated Pressure Balanced Plug Valves
LUBRICATED PRESSURE BALANCED PLUG VALVES APPLICATIONS :
CRUDE/PETROLEUM/LPG/PROPANE/FUEL GAS LINES
WHY PLUG VALVES ?

1. Larger seating area compared to other valves. 10. Capacity to operate under any differential pressure since this
2. No bonnet cavity. has no bearing onValve operating torque.
3. No high projection yoke. 11. Facility to ease Valves from seat in case of difficulties in
4. No exposed thread to corrode. operation (this can happen in all types of valves but easing of
5. No underhanging body to waste vital space. seat may not be possible in other types)
6. No stem breakage. 12. Valves offer lower, predictable operating torque under wide
7. 100% shut off on services can be achieved by injecting sealant differentials/working pressures than any other valve.
in open or close conditions. Other Valves offer this as Plug Valves have a field proven performance in India and
secondary sealing feature knowing that one-day primary abroad for many years and even now are referred to as the
seats will fail - this is not a pressurised sealant system as used only valves to offer drip tight sealing capability.
in PlugValves. These valves handle liquids, gases (both clean and dirty),
8. Low pressure drop. aggressive and corrosive liquids and slurries and most
9. Intrinsic - fire safe sinceValve is metal seated. importantly have performed well the test of time.

FEATURES BENEFITS
1. PTFE treatment Smooth & Consistent torque
2. Large seating area (protected) Freedom from regular maintenance
3. Fire-safe graphite stem seal Certainty of operation
4. Emergency stem seals Assured sealing
5. Lapped taper surfaces for precise sealing Certainty of sealing across the seats
6. External provision for plug sealant Online maintenance possible
7. Fire-safe design Increased overall reliability
8. Position indicator Indicates valve in open/close position
9. Blowout proof stem Safety to atmosphere

PRESSURE BALANCED PLUG VALVES

Carbon Steel plugs are subjected to the following treatments:
a) Case hardening
The case hardening increases only the hardness of the plug surface, which is subjected to wear. At the same time it keeps the
mechanical properties of the base material core unchanged. Consequently, the base material has more toughness and resistance
against impacts.
b) PTFE anti-friction treatment
The PTFE anti-friction treatment is carried out on the plug to obtain the following advantages:
l Low friction between plug and body l Wear resistance

l Low torque moment l Resistance to seizure

Pressure Balance System

The Pressure Balance system works on the principle of Pascal's law.
In a Lubricated Pressure Balanced Plug valve, two holes are provided in the Plug-one at the top and the
other at the bottom.This makes the pressure equal between the plug and the port areas /chambers on
either end of the plug.
The hole in the smaller end of the plug is provided with a non-return valve.This ensures that the pressure
at the chamber / area above the small end of the plug greater than the line pressure. Whereas, the
pressure at the larger end of the plug and that of the chamber below the plug are equal. In this way the
taper locking of the plug is prevented.
Pressure Balance system ensures a predictable and consistent torque.
Thus, these valves are also called as dynamically balanced plug valves.

3
 Research & Development

Cyclic Testing Cv Testing

4
 FIRE SAFE TEST CERTIFICATES

FUGITIVE EMISSION TEST CERTIFICATES

 Fire Safe Test

Valve under fire safe test Valve being cooled after fire safe test.

All Serino PlugValves have been tested against fire resistance according toAPI-6FA standards and witnessed by International third party
Inspection Agencies.
Our Plug Valves guarantee, high reliable performance when exposed to Fire Test conditions because of the Metal to Metal seat,
diaphragm sealing and also the stem sealing compound with graphite.

Plug with ENP coating Plug with Anti-frictionTreatment

5
 Valve Pattern Types

Lubricated Pressure Balanced Plug Valves are made in Short,Venturi and Regular patterns in accordance with API
599 and API 6D.The difference among Short,Venturi and Regular Patterns is as follows: Port Area

Short Pattern Venturi Pattern Regular Pattern

Short Pattern Valves have a reduced Venturi Pattern Valves are designed for Regular Pattern Valves have greater
port area. The Short-Pattern design is minimum pressure loss consistent with port area than Venturi & Short port
only in classes 150# and 300# where the reduced port area used in this type area styles (approximately 70% of full
flanged Plug Valve match the face to face of valves, and have a conjunction of pipe's area).
dimensions of GateValves. body and plug ports, which
approximates aVenturi throat.

Valve Standard Adopted

API 6A Specification for wellhead ASME B 31.4 Liquid Transportation System

and Christmas tree for Liquid Petroleum Gas.
equipment.
ASME B 31.8 Gas Transmission and
API 6D / ISO 14313 Petroleum and Natural Gas Distribution Piping System.
Insustries - Pipeline
BS 5353 Steel Plug Valves.
Transportation Systems -
Pipeline Valves. BS 12266 Part 1 Industrial Valves - Testing of
Valves.
API 6FA Specification for Fire Test
for Valves. BS 12266 Part 2 Industrial Valves - Testing of
Valves.
API RP6F Recommended - Practice
for Fire Test for Valves.
API 598 Valve Inspection and MSS-SP6 Standard Finish for Contact
Testing. Face of Pipe Flanges.
API 599 Steel and Ductile Iron MSS-SP25 Standard Marking System for
Plug Valves Valves.
ISO 15848-1 Industrial valves Measurement, MSS-SP44 Steel Pipe Line Flanges.
Test and Qualification procedures
MSS-SP53 Quality Standard for Steel
for Fugitive Emission
Casting - Magnetic Particle
Examination Method.
ASME B 16.5 Pipe Flanges and Flanged MSS-SP54 Quality Standard for Steel
Fittings. Casting - Radiographic
Examination Method.
ASME B 16.10 Face-to-Face and End-to-
End Dimensions of Valves. MSS-SP55 Quality Standard for Steel
Casting - Visual Method.
ASME B 16.25 Buttwelding Ends.
MSS-SP61 Pressure Testing of Steel
ASME B 16.34 Valves-Flanged, threaded
Valves.
and Welding Ends.
MSS-SP93 Quality Standard for Steel
ASME B 31.3 Chemical Plant and
Casting - Liquid Penetrant
Petroleum Refinery Piping.
Examination Method.

6
 Valve Pattern Types

ANSI CLASS - 150# - 2500#

Note :
1. RF height 2 mm included in C for 150# & 300#
2. RF height 7 mm not included in C for 600#, 1500# & 2500#
3. Valves with SW & BW ends and in class 800# Can also be supplied on request.
4. Weight in KG are approximate
Dimensions are in mm

Short Pattern Regular Pattern

ANSI CLASS# 150# 300# 600# 1500# 2500#
Size NPS 1/2” 3/4" 1" 1½" 1/2” 3/4" 1" 1½" 1/2” 3/4" 1" 1½" 1/2” 3/4" 1" 1½" 1/2” 3/4" 1" 1½"
DN 15 20 25 40 15 20 25 40 15 20 25 40 15 20 25 40 15 20 25 40
Face to Face (RF) L 140 140 140 165 159 159 159 190 216 216 216 241 254 254 254 305 308 308 308 384
Flange Diameter 0 90 100 110 125 95 115 125 155 95 115 125 155 120 130 150 180 135 140 160 205
Raised Face Diameter (RF) R 34.9 42.9 50.8 73 34.9 42.9 50.8 73 34.9 42.9 50.8 73 34.9 42.9 50.8 73 34.9 42.9 50.8 73
Flange Thickness (RF) C 10 11 12 15 14 16 18 21 14 16 17.5 22.4 22.4 25.4 28.4 31.8 30.2 31.8 35 44.5
Length of Wrench X 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 350 300 300 350 350
Weight in KG RF 6 6 8 10 8 9 9 12 8 9 10 15 10 12 16 24 14 18 28 40

P.No. COMPONENT DESCRIPTION TECHNICAL STANDARDS CLASS HYDROSTATIC TEST AIR SEAT
PSIG PSIG
1 BODY ASTM A 216 Gr. WCB
DESIGN BS 5353
2 PLUG ASTM A 216 Gr. WCB BODY SEAT
CASE HARDENED + PTFE
IMPREGNATED / SS 410 + PTFE
FACE TO FACE ASME B16.10 150# 450 315 80
PREGNATED
300# 1125 815 80
FLANGE DIMENSIONS
3 CAP ASTM A 216 Gr. WCB / SS 410 AND DRILLING ASME B16.5 600# 2250 1630 80
4 SEALANT
INJECTOR CARBON STEEL INSPECTION AND 1500# 5575 4080 80
TESTING API 598
5 GASKET SPIRALLY WOUND SS 304 + GRAFOIL 2500# 9275 6790 80

7
 Lubricated Pressure Balanced Plug Valves

ANSI CLASS-150#

Short Pattern Dimensions are in mm

Size (in inches) NPS 2" 3" 4" 6" 8" 10" 12" P. No. COMPONENT MATERIAL SPECIFICATION
DN 50 80 100 150 200 250 300
1 BODY ASTM A 216 Gr. WCB
Face to Face (RF) L 178 203 229 267 292 330 356
End to End (BW) L1 267 330 356 457 521 559 635 2 PLUG ASTM A 216 Gr. WCB
PTFE IMPREGNATED
Flange Diameter 0 150 190 230 280 345 405 485
3 COVER ASTM A 216 Gr. WCB
Raised Face Diameter(RF) R 92 127 157 216 270 324 381
Flange Thickness (RF) C 16 19 24 26 29 30 32 4 SEALANT
INJECTOR CARBON STEEL
Stem Across Flats 19 25.4 25.4 28.5 - - -
STUD ASTM A 193 Gr. B7
Hand Wheel Diameter G - - - 450 450 500 500 5 BOLTING
NUT ASTM A 194 Gr. 2H
Wrench Length from CentreX 300 300 400 450 - -
6 GASKET SPIRALLY WOUND SS 304 + GRAFOIL
Weight in KG RF 18 33 54 78 141 m 325
BW 15 29 46 67 125 195 290 7 GEAR BOX HIGH GRADE CAST IRON

Note :1. Short Pattern valves from 4" -10" will have 2 tapped holes threaded UNC in side flanges.
2. 12” has 4 tapped holes threaded UNC in flanges.
3. Hand wheel dimension (G) is indicative only.
4.Valves NPS 6" and above can be supplied with gear operation (optional)
Venturi Pattern Dimensions are in mm
TECHNICAL STANDARDS
Size (in inches) NPS 10" 12" 14" 16" 18" 20" 24" 30”
DN 250 300 350 400 450 500 600 750 DESIGN API 6D / BS 5353

Face to Face (RF) L 533 610 686 762 864 914 1067 1295 FACE TO FACE ASME B16.10 / API 6D

End to End (BW) L1 559 635 686 762 864 941 1067 1295 FLANGE DIMENSIONS
AND DRILLING ASME B16.5
Flange Diameter 0 406 485 535 595 635 700 815 984
INSPECTION AND
Raised Face Diameter(RF) R 324 381 413 470 533.5 584 692 857 TESTING API 598 / API 6D
Flange Thickness (RF) C 30 32 35 37 40 43 48 75
Hand Wheel Diameter G 500 500 500 600 600 600 600 700 HYDROSTATIC TEST PSIG AIR SEAT
BODY SEAT PSIG
Weight in KG RF 220 325 430 760 900 1100 1300 3025
BW 195 270 354 670 794 960 1140 2625 450 315 80

Note: 1. Hand Wheel Dimension is indicative only.

2. For Valve NPS 30" Face to Face as per ASME B16.10.
3. For Valve NPS 30" Flange Details as per MSS-SP-44.
8
 Lubricated Pressure Balanced Plug Valves

ANSI CLASS-300#

Short Pattern
Dimensions are in mm
Size (in inches) NPS 2" 3" 4" 6" 8" 10" 12" P. No. COMPONENT MATERIAL SPECIFICATION
DN 50 80 100 150 200 250 300
1 BODY ASTM A 216 Gr. WCB
Face to Face (RF) L 216 283 305 403 419 457 502
End to End (BW) L1 267 330 356 457 521 559 635 2 PLUG ASTM A 216 Gr. WCB
PTFE IMPREGNATED
Flange Diameter 0 165 210 255 320 380 445 520
3 COVER ASTM A 216 Gr. WCB
Raised Face Diameter(RF) R 92 127 157 216 270 324 381
Flange Thickness (RF) C 22 29 32 37 42 48 51 4 SEALANT
INJECTOR CARBON STEEL
Stem Across Flats 19 25.4 25.4 28.5 - - -
STUD ASTM A 193 Gr. B7
Hand Wheel Diameter G - - - 450 450 500 500 5 BOLTING
NUT ASTM A 194 Gr. 2H
Wrench Length from Centre X 300 300 400 450 - -
6 GASKET SPIRALLY WOUND SS 304 + GRAFOIL
Weight in KG RF 22 40 62 100 180 290 400
BW 17 34 50 80 148 240 330 7 GEAR BOX HIGH GRADE CAST IRON

Note : 3. Hand wheel dimension (G) is indicative only.

4.Valves NPS 6" and above can be supplied with gear operation (optional)

Venturi Pattern TECHNICAL STANDARDS

Dimensions are in mm
Size (in inches) NPS 6" 8" 10" 12" 14" 16" 18" 20" 24" 30” DESIGN API 6D / BS 5353
DN 150 200 250 300 350 400 450 500 600 750
FACE TO FACE ASME B16.10 / API 6D
Face to Face (RF) L 403 419 457 502 762 838 914 991 1143 1397
FLANGE DIMENSIONS
End to End (BW) L1 457 521 559 635 762 838 914 991 1143 1397 AND DRILLING ASME B16.5
Flange Diameter 0 320 380 445 520 585 650 710 775 915 1092 INSPECTION AND
TESTING API 598 / API 6D
Raised Face Diameter(RF) R 216 270 324 381 413 470 533 584 692 857
Flange Thickness (RF) C 37 42 48 51 54 57 61 64 70 92
Hand Wheel Diameter G 450 450 500 500 500 600 600 600 600 700 HYDROSTATIC TEST PSIG AIR SEAT
BODY SEAT PSIG
Weight in KG RF 100 180 290 400 550 800 1100 1500 2100 2730
BW 80 150 240 330 445 654 865 1218 1675 2060 1125 815 80

Note: 1. Hand Wheel Dimension is indicative only.

2. For Valve NPS 30" Face to Face as per ASME B16.10.
3. For Valve NPS 30" Flange Details as per MSS-SP-44.
9
 Lubricated Pressure Balanced Plug Valves

ANSI CLASS-600#

Regular Pattern
Dimensions are in mm
Size (in inches) NPS 2" 3" 4" 6" 8" 10" 12" 14" 16” 20” 24” P. COMPONENT MATERIAL SPECIFICATION
DN 150 200 250 300 350 400 450 500 600 750 600 No.
Face to Face (RF) L 292 356 432 559 660 787 838 889 991 1194 1397
1 BODY ASTM A 216 Gr. WCB
End to end (BW) L1 292 356 432 559 660 787 838 889 991 1194 1397
End to end (RTJ) L2 295 359 435 562 663 790 841 892 994 1200 1407 2 PLUG ASTM A 216 Gr. WCB
PTFE IMPREGNATED
Flange Diameter 0 165 210 275 355 420 510 560 605 685 815 940
Raised Face Diameter(RF) R 92 127 157 216 270 324 381 413 470 584 692 3 COVER ASTM A 216 Gr. WCB
Raised Face Diameter(RTJ)R 108 146 175 241 302 356 413 457 508 635 749 4 SEALANT
Flange Thickness (RF) C 26 32 38 48 56 64 67 70 76 89 102 INJECTOR CARBON STEEL
Hand Wheel Diameter G -- 500 500 600 600 600 650 650 650 700 700 STUD ASTM A 193 Gr. B7
5 BOLTING
NUT ASTM A 194 Gr. 2H
Length of Wrench X 500 600 600 - - - - - - - -
6 GASKET SPIRALLY WOUND SS 304 + GRAFOIL
Weight in KG RF 25 47 80 195 335 610 900 1230 1620 2600 4315
BW 20 38 55 135 245 500 735 895 1295 2280 3430 7 GEAR BOX HIGH GRADE CAST IRON

Note :1. NPS 4” available with wrench or gear operated.

2. Hand wheel dimension (G) is indicative only.

Venturi Pattern TECHNICAL STANDARDS

Dimensions are in mm
Size (in inches) NPS 6" 8" 10" 12" 14" 16" 18" 20" 24" 30” DESIGN API 6D / BS 5353
DN 150 200 250 300 350 400 450 500 600 750
FACE TO FACE ASME B16.10 / API 6D
Face to face (RF) L 559 660 787 838 889 991 1092 1194 1397 1651
End to End (BW) L1 559 660 787 838 889 991 1092 1194 1397 1651 FLANGE DIMENSIONS
End to End (RTJ) L2 562 663 790 841 892 994 1095 1200 1407 1664 AND DRILLING ASME B16.5
Flange Diameter 0 355 420 510 560 605 685 745 815 940 1130 INSPECTION AND
Raised Face Diameter(RF) R 216 270 324 381 413 470 533 584 692 857 TESTING API 598 / API 6D
Raised Face Diameter (RTJ)R 241 302 356 413 457 508 575 635 749 917
Flange Thickness (RF) C 48 56 64 67 70 76 83 89 102 114
HYDROSTATIC TEST PSIG AIR SEAT
Hand Wheel Diameter G 500 500 600 600 650 650 650 700 700 700
BODY SEAT PSIG
Weight in KG RF 162 260 500 715 910 1200 1650 1950 2600 6515
BW 112 190 410 580 730 960 1400 1720 2280 5460 2250 1630 80

Note: 1. Hand Wheel Dimension is indicative only.

2. For Valve NPS 30" Face to Face as per ASME B16.10.
3. For Valve NPS 30" Flange Details as per MSS-SP-44.
10
 Lubricated Pressure Balanced Plug Valves

ANSI CLASS-900#

Dimensions are in mm

Short Pattern Regular Pattern

Size NPS 2" 3" 4" 6" 8" 10" 12" 14" 16" 20" 24"
DN 50 80 100 150 200 250 300 350 400 500 600
Face to Face (RF) L 368 381 457 610 737 838 965 1029 1130 1321 1549
End to End (BW) L1 368 381 457 610 737 838 965 1029 1130 1321 1549
End to End (RTJ) L2 371 384 460 613 740 841 968 1039 1140 1334 1568
Flange Diameter 0 215 240 290 380 470 545 610 640 705 855 1040
Raised Face Diameter (RF) R 92 127 157 216 270 324 381 413 470 584 692
Raised Face Diameter RTJ 124 156 181 241 308 362 419 467 524 648 772
Flange Thickness (RF) C 38 38 45 56 64 70 80 86 89 108 140
Hand Wheel Diameter G -- -- 500 500 500 600 600 600 700 700 700
Length of Wrench X 450 500 600 - - - - - - - -
Weight in KG RF 45 74 106 250 360 600 1050 1250 1600 2395 4700
BW 34 53 82 205 265 430 810 920 1250 1915 4125

Note : NPS 4" available with wrench or gear operated.

Hand Wheel Dimension (G) is indicative only.
For Valves NPS 14", 20" & 24" - Face to Face as per ASME B16.10.

P. No. COMPONENT MATERIAL SPECIFICATION TECHNICAL STANDARDS

1 BODY ASTM A 216 Gr. WCB DESIGN API 6D / BS 5353

FACE TO FACE ASME B16.10 / API 6D
2 PLUG ASTM A 216 Gr. WCB
PTFE IMPREGNATED FLANGE DIMENSIONS
AND DRILLING ASME B16.5
3 COVER ASTM A 216 Gr. WCB
INSPECTION AND
4 SEALANT TESTING API 598 / API 6D
INJECTOR CARBON STEEL

5 BOLTING STUD ASTM A 193 Gr. B7

NUT ASTM A 194 Gr. 2H HYDROSTATIC TEST PSIG
AIR SEAT
6 GASKET SPIRALLY WOUND SS 304 + GRAFOIL PSIG
BODY SEAT
7 GEAR BOX RENEWABLE WITH VALVE OPEN,
GRAFIOL DIE MOULDED RINGS 450 315 80
11
 Lubricated Pressure Balanced Plug Valves

ANSI CLASS-1500# & 2500#

1500# 2500# Dimensions are in mm

Regular Pattern Venturi Pattern Regular Pattern
Size NPS 2" 3" 4" 6" 8" 10" 12" 14" 16" 20" 24" 2" 3" 4" 6" 8" 10" 12"
DN 50 80 100 150 200 250 300 350 400 500 600 50 80 100 150 200 250 300
Face to Face (RF) L 368 470 546 705 832 991 1130 1257 1384 1664 1943 451 578 673 914 1022 1270 1422
End to End (BW) L1 368 470 546 705 832 991 1130 1257 1384 1664 1943 451 578 673 914 1022 1270 1422
End to End (RTJ) L2 371 473 549 711 842 1001 1146 1276 1406 1686 1971 454 584 683 927 1038 1292 1445
Flange Diameter 0 215 265 310 395 485 585 675 750 825 985 1170 235 305 355 485 550 675 760
Raised Face Diameter (RF) R 92 127 157 216 270 324 381 413 470 584 692 92 127 157 216 270 324 381
Raised Face Diameter RTJ 124 168 194 248 318 371 438 489 546 673 794 133 168 203 279 340 425 495
Flange Thickness (RF) C 38 48 54 83 92 108 124 133 146 178 203 51 67 76 108 127 165 185
Hand Wheel Diameter G -- -- 500 500 600 600 650 700 700 700 700 -- 500 500 600 700 700 700
Length of Wrench X 450 500 450 500
Weight in KG RF 45 90 155 310 590 950 1600 1870 3050 3720 5420 80 155 255 625132021303020
BW 35 67 115 248 532 740 1260 1340 2475 2700 3565 60 100 165 445 995 1575 2170

Note : NPS 4" available with wrench or gear operated.

Hand Wheel Dimension (G) is indicative only.
For Valves NPS 14", 20" & 24" - Face to Face as per ASME B16.10.

P. No. COMPONENT MATERIAL SPECIFICATION TECHNICAL STANDARDS

1 BODY ASTM A 216 Gr. WCB DESIGN API 6D / BS 5353

FACE TO FACE ASME B16.10 / API 6D
2 PLUG ASTM A 216 Gr. WCB
PTFE IMPREGNATED FLANGE DIMENSIONS
AND DRILLING ASME B16.5
3 COVER ASTM A 216 Gr. WCB
INSPECTION AND
4 SEALANT TESTING API 598 / API 6D
INJECTOR CARBON STEEL

5 BOLTING STUD ASTM A 193 Gr. B7

NUT ASTM A 194 Gr. 2H HYDROSTATIC TEST PSIG
AIR SEAT
6 GASKET SPIRALLY WOUND SS 304 + GRAFOIL PSIG
BODY SEAT
7 GEAR BOX RENEWABLE WITH VALVE OPEN,
GRAFIOL DIE MOULDED RINGS 450 315 80
12
 Design Characteristics

Plain Stem Design

BLOWOUT PROOF STEM WETHER PROOF SEAL

CHECK VALVE

STEM SEALING COMPOUND

INJECTOR TO RENEW SEALING
TO ATMOSPHERE
GRAPHITE PACKING RINGS GIVE
NORMAL SEALING AND FIRE SEALING

COUPLER RING

PRESSURE BALANCE HOLES PLUG SEALANT INJECTOR

TO RENEW SEALING
TO DOWNSTREAM

BODY

LOWER THRUST WASHER COVER

PLUG WITH METAL - TO - METAL

PLUG LOADING SCREW SEATING, PTFE TREATED

13
 Exploded View

1
1 Circlip
27
2 2 Stopper Plate
3
3 Stopper Pin
4
4 Oil Seal

5 5 Cap Screws

6 6 Gland Plate

7 Gland Packing
7
8 Body
8 9 Stem Injector

10 Plug Injector
9
11 Thrust Shim
10 SERINO
12 Stem

11 13 Coupler Ring

14 Ball Retainer (Top)

12
15 Ball Top

13 14 16 Plug
15 17 Ball Bottom
16
18 Ball Retainer (Bottom)
17 19 Diaphragm
18
20 Gasket
19
21 Lower thrust washer
20

21
22 Cover
22 23 Stud
23
24 Nut
24 25 LoadingScrews

26 Loading Screw Cap

25
27 Wrench
26

14
 Lubricated Pressure Balanced Plug Valves

INSPECTION AND TEST

• All major components are subjected to chemical
analysis and mechanical tests including NDT (RT, MT, PT
to the customers requirements.
• All valves are Hydraulically and pneumatically tested.
• Third party inspection can also be carried out.

Hydraulic Testing Vacuum Testing

MATERIALS
SVPL Lubricated Pressure Balanced Plug valves are available with various
combinations of materials to suit different service requirements.
• General Service valve in carbon steel body and plug as per ASTM A216GRWCB.
• For low temperature valve with LTCS body and plug as per ASTM A352 GR LCB.
• For NACE and SOUR services as per MR-01 -75 in special carbon steel body and plug as per ASTM A216
GR WCB meeting the requirement of NACE MR-01 -75.
• Special carbon steel body and plug as per ASTM A216 GR WCB meeting the requirements of Hydrogen
service.
• Various grades of Austenitic Stainless Steel body and plug.
• Special materials including Duplex and Super - Duplex Stainless Steel for sea water and corrosive
services.
• Valves for other service conditions and different materials of constructions are also available on request.

SPECIAL FEATURES*
• Special hard facing and corrosion resistant materials including stellite, Inconel, etc., to
prevent damages due to abrasion by solids or due to corrosion attack.
• Electroless Nickel plating (ENP) on plug surfaces to provide corrosion protection.
ENP coating is provided as per ASTM B733 and the thickness can be as per
customer's specifications

Plasma Welding
ACCESSORIES
On request Serfno Lubricated Pressure Balanced plug valves can be
supplied with :
• Electric Motor Actuators
• Pneumatic Actuators
• Electro Hydraulic Actuators, and
• Gas over Oil Actuators.

CNC Machining

*only on special requests

Catalogue illustrations shown are general representations of a certain size but not necessarily all sizes in details. Design and construction
are subject to change without notice in order to adapt our product to current market, manufacturing and production requirements

15
 API 602 Class 800 Forged Steel Gate Valves
SVPL Forged Steel Class 800 Outside Screw and yoke, Rising Spindle, non-rising hand wheel, bolted bonnet, solid wedge, renewable
body seat rings, removable spindle nut, valve can be repacked under pressure when in the open position.

MATERIAL SPECIFICATIONS

NO COMPONENT MATERIALS

1 BODY ASTM A105/A 182 F11/F22/F5/F9

2 BONNET F304/F304L/F316/F316L/F 321

3 SPINDLE ASTM A276 TYPE 410/304/316/321

4 WEDGE * ASTM A217GrCA15/

A 351 Gr. CF8/CF8M/CF8C/CF3

5 SEAT RING * ASTM A276 TYPE 410/304/316/321

6 PACKING Graphite

7 HANDWHEEL Malleable Iron/Steel

8 BODY BONNET BOLT ASTM A 193 Gr. B7/B8/B8M/B16

9 GASKET Spiral wound S S 304 /SS316/SS321

INSPECTION AND TESTING API 598 with Graphite Filler
Shell Hyd. Seat Backseat Pneumatic Seat * Stellite F acing available
(Psig) (Psig) (Psig) (Psig)
3000 2200 2200 80

DIMENSIONS ARE IN mm

Description Valve size 15 20 25 40 50

End to End (L) 80 88 100 120 140
Centre to Top Open (K) 155 165 195 245 280
API 602 Class 800
bolted bonnet Socket Bore (D) 21.70 27.05 33.80 48.65 61.10
Socket Weld/ 21.95 27.30 34.05 48.89 61.35
Screwed End Socket Depth (A) 9.6 12.7 12.7 12.7 16
Throat Bore (d) 9.6 12.7 17.5 28.6 36.5
Ø HW 96 96 96 125 150

Engineering specifications furnished with male and female joints between body and bonnet.
Bodies Gasket is spiral wound asbestos filled 18/8 SS.
All bodies are machined from forgings and are designed to equal or Welded and Pressure seal bonnet valves are recommended for high
exceed the maximum wall thickness and strength requirements of pressure service.
recognized construction codes. Welded bonnet valves are designed so that pressure load is carried
The outside diameters of socket weld and threaded ends are by threaded section while the weld is for sealing only
suitable for schedule 80 pipe for API Class 800 and ANSI Class 150
600, schedule 160 pipe for ANSI class 1500 and 2500. All gate and globe valves have a back seating arrangement.

For "Flanged End Valves" All flanges are attached to the bodies by Discs
welding, or may be cast integral Buttweld ends can also be Solid wedges are available for gate valves. Plug type discs are
furnished. available for globe valves, and lift type discs are available for check
Each seat port diameter conforms to API 602 AND DETAILS ARE valves.
SHOWN UNDER A solid stellite number 6 disc is available in gate, globe and check
Bonnets valves when specified.

Outside Screw and Yoke Design is our standard for all services. Seats
Bolted Gate valves have renewable seats, expanded into the body and can
and W elded type bonnets are available. Bolted bonnet valves are be lapped without removal from the body

16
 150, 300, 600, 900,1500 & 2500 Cl. Steel Gate Valves
SVPL Carbon steel 150, 300, 600, 900,1500, 2500 Class outside screw and yoke rising spindle, non-rising hand wheel bolted bonnet
solid or flexible wedge, renewable body rings, removable spindle nut, valve can be repacked under pressure when in the full open

ITEM NO COMPONENT MATERIALS SPECIFICATION

1. BODY ASTM A216 Gr. WCB
2. BONNET ASTM A216 Gr. WCB
3. BODY RING * ASTM A105 WITH 13% CR FACING /
A217 Gr. CA15 / ASTM A276 TYPE 410
4. WEDGE * ASTM A105 WITH 13% CR FACING /
A217 Gr. CA15
5. STEM 13% CR/ASTM A276 TYPE 410/
ASTM A182 Gr F6
6. HEX. BOLT ASTM A193 Gr. B7
7. HAND WHEEL MALLEABLE IRON/SG IRON/STEEL
8. PACKING GRAPHITE
9. BONNET GASKET CSIG/SPIRALLY WOUND SS 304
WITH GRAPHITE FILLER
* STELLITE FACING AVAILABLE

INSPECTION AND TESTING API 598 REFERENCE STANDARDS

CLASS SHELL (PSIG SEAT (PSIG) DESIGN API 602/ISO 15761

150 450 315
300 1125 815 FACE TO FACE DIMENSIONS ASME B16.10
600 2250 1630
END FLANGE DIMENSIONS ASME B16.5
900 3350 2445
1500 5575 4080 BUTT WELDED END DIMENSIONS ASME B16.25
2500 9275 6790
AIR UNDER WATER - 80 PRESSURE - TEMPERATURE RATINGS ASME B16.5 / B16.34

DIMENSIONS ARE IN mm
SIZE(INCH) 1/2 3/4 1.0 1.1/2
L-RF/L1-BW 108 117 127 165
CLASS L2-RTJ - - 140 178
150 H 155 165 185 365
Ø HW 96 96 96 125
L-RF/L1-BW 140 152 165 190
CLASS L2-RTJ 151 165 178 203
300 H 155 165 185 365
Ø HW 96 96 96 125
L-RF/L1-BW 165 190 216 241
CLASS L2-RTJ 168 190 216 241
600 H 155 195 185 365
Ø HW 96 96 96 125
L-RF/L1-BW 216 229 254 305
CLASS L2-RTJ 216 229 254 305
900 H 165 210 235 325
Ø HW 96 125 125 150
L-RF/L1-BW 216 229 254 305
CLASS L2-RTJ 216 229 254 305
1500 H 165 210 235 325
Ø HW 96 125 125 150
L-RF/L1-BW 264 273 308 384
CLASS L2-RTJ 264 273 308 387
2500 H 275 305 250 385
Ø HW 125 150 150 200
For M.O.C. Refer Page No.27
For Flange Details Refer Page No.25
17
 150, 300, 600, 900,1500 & 2500 Cl. Cast Steel Gate Valves
SVPL Carbon steel 150, 300, 600, 900,1500, 2500 Class outside screw and yoke rising spindle, non-rising hand wheel bolted bonnet
solid or flexible wedge, renewable body rings, removable spindle nut, valve can be repacked under pressure when in the full open

ITEM NO COMPONENT MATERIALS

1. BODY ASTM A216 Gr. WCB
2. BONNET ASTM A216 Gr. WCB
3. BODY RING * ASTM A105 WITH 13%
CR FACING / A217 Gr. CA15
4. WEDGE * ASTM A216 Gr. WCB WITH 13%
CR FACING / A217 Gr. CA15
5. SPINDLE 13% CR/ASTM A276 TYPE 410/
ASTM A182 Gr F6
6. BACK SEAT BUSH 13% CR/ASTM A276 TYPE 410
7. SPINDLE NUT ASTM A439 TYPE D2
8. BONNET STUD BOLT ASTM A193 Gr B7
9. BONNET STUD BOLT NUT ASTM A194 Gr 2H
10. HANDLEWHEEL MALLEABLE IRON/SG IRON/STEEL
11. PACKING GRAPHITE
12. BONNET GASKET CSIG/SPIRALLY WOUND SS 304
WITH GRAPHITE FILLER
* STELLITE FACING AVAILABLE

INSPECTION AND TESTING API 598 REFERENCE STANDARDS

CLASS SHELL (PSIG SEAT (PSIG) DESIGN API 602/ISO 15761

150 450 315
300 1125 815 FACE TO FACE DIMENSIONS ASME B16.10
600 2250 1630
END FLANGE DIMENSIONS ASME B16.5
900 3350 2445
1500 5575 4080 BUTT WELDED END DIMENSIONS ASME B16.25
2500 9275 6790
AIR UNDER WATER - 80 PRESSURE - TEMPERATURE RATINGS ASME B16.5 / B16.34

DIMENSIONS ARE IN mm
SIZE(INCH) 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 24.0
CLASS 150* L-RF 165 178 190 203 229 267 292 330 356 381 406 432 457 508
L1-BW 165 216 241 282 305 403 419 457 502 572 610 660 711 813
L 2-RTJ 178 191 203 216 242 280 305 343 369 394 419 445 470 521
H 335 380 420 505 615 780 955 1325 1450 1700 1960 2100 2260 2750
Ø HW 200 200 200 225 250 300 350 400 450 450 450 450 450 500
CLASS 300* L-RF/L1-BW 190 216 241 282 305 403 419 457 502 762 838 914 991 1143
L 2-RTJ 203 232 257 298 321 419 435 473 518 778 854 930 1010 1165
H 350 435 485 520 640 880 1055 1285 1560 1830 2050 2260 2660 3010
Ø HW 200 200 225 250 300 350 400 450 500 450 450 450 450 500
CLASS 600** L-RF/L1-BW 241 292 330 356 432 559 660 787 838 889 991 1092 1194 1397
L 2-RTJ 241 295 333 359 435 562 663 790 841 892 994 1095 1200 1407
H 375 455 510 575 675 975 1155 1360 1680 1950 2110 2310 2710 3125
Ø HW 200 200 225 300 300 450 500 600 500 500 500 500 500 600
CLASS 900*** L-RF/L1-BW 305 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549
L 2-RTJ 305 371 422 384 460 613 740 841 968 1039 1140 1232 1334 1568
H 350 445 555 667 768 1054 1308 1549 1825 1969 2121 - - -
Ø HW 200 300 300 300 400 500 600 600 600 600 600 - - -
CLASS 1500 **** L-RF/L1-BW 305 368 419 470 546 705 832 991 1130 1257 1384 1537 1664 1943
L 2-RTJ 305 371 422 473 549 711 842 1001 1146 1276 1406 1559 1686 1971
H 489 556 629 692 876 1134 1372 1619 1949 2054 - - - -
Ø HW 250 300 350 350 450 500 600 600 600 600 - - - -
CLASS 2500 **** L-RF/L1-BW 384 451 508 578 673 914 1022 1270 1422 - - - - -
L 2-RTJ 387 454 514 578 683 927 1038 1292 1444 - - - - -
H 525 585 710 802 908 1095 1320 . . . . . . .
Ø HW 300 350 400 450 500 600 600 - - - - - - -
*SIZE - 14” & above are Gear Operated ***SIZE - 6” & above are Gear Operated For M.O.C. Refer Page No.27
**SIZE - 12” & above are Gear Operated ****SIZE - 3” & above are Gear Operated For Flange Details Refer Page No.25
18
 BSEN ISO 15761 Class 800 Forged Steel Globe Valves
SVPL Forged Steel Class 800 Outside Screw and yoke, Rising Spindle, non-rising hand wheel, bolted bonnet, solid wedge, renewable
body seat rings, removable spindle nut, valve can be repacked under pressure when in the open position.

MATERIAL SPECIFICATIONS

NO COMPONENT MATERIALS

1 BODY ASTM A105/A 182 F11/F22/F5/F9

2 BONNET F304/F304L/F316/F316L/F 321

3 SPINDLE ASTM A276 TYPE 410/304/316/321

4 DISC * ASTM A217Gr CA15/

A 351 Gr. CF8/CF8M/CF8C

5 SEAT RING * ASTM A276 TYPE 410/304/316/321

6 PACKING Graphite

7 HANDWHEEL Malleable Iron/Steel

8 BODY BONNET BOLT ASTM A 193 Gr. B7/B8/B8M/B16

9 GASKET Spiral wound S S 304 /SS316/SS321

INSPECTION AND TESTING ISO 12266 PI with Graphite Filler
Shell Hyd. Seat Backseat Pneumatic Seat * Stellite F acing available
(Psig) (Psig) (Psig) (Psig)
3000 2200 2200 80

DIMENSIONS ARE IN mm

Description Valve size 15 20 25 40 50

End to End (L) 80 88 100 120 140
Centre to Top Open (K) 155 165 195 245 280
ISO 15761
Class 800 Socket Bore (D) 21.70 27.05 33.80 48.65 61.10
bolted bonnet 21.95 27.30 34.05 48.89 61.35
Socket Weld/
Socket Depth (A) 9.6 12.7 12.7 12.7 16
Screwed End
Throat Bore (d) 9.6 12.7 17.5 28.6 36.5
Ø HW 96 96 96 125 150

Carbon and low alloy steel globe and check valves have a Integral Yoke Bushings
seat overlayed with stelllte number 6 (Optional). They are made of nonferrous copper alloy or ductile Niresist
Stems material to ASTM A439 Gr D2 and having a suitable bearing and a
minimum melting point above 1750°F (954°C).
Trapezoidal Screw thread modified ACME type Is used on all
valves. A beveled shoulder provides a back seating surface which Packing and Gaskets
contacts the back seat In the bonnet and permits re-packlng SVPL Standard packing are of compressed asbestos die moulded
under pressure when valve Is fully open. packing with inconel wire reinforced metal with superficial
corrosion inhibitor of molybdenum disulphide coating suitable
Stuffing boxes
for wide range of applications including high pressure and high
A minimum of six packing rings are used on all bolted bonnet temperature with minimum maintenance.
valves. Extra deep stuffing boxes with lantern rings are provided Gaskets are of SS304 with asbestos filler are suitable for wide
for special service valves such as Cryogenic and Hydrofluoric range of applications including high pressure and high
AcidValves etc. temperature with minimum maintenance.
Gland follower and Gland Flange Non-asbestos packing and gaskets are also available when
They are of two piece construction with a spherical joint specified.
between the two. This design assures good alignment of the On special request grafoil packing and gasket can be supplied for
follower to reduce the possibility of binding the stem or high temperature and critical applications.
damaging the stem surface.

19
 150, 300, 600, 900,1500 & 2500 Cl. Cast Steel Globe Valves
SVPL Carbon steel 150, 300, 600, 900,1500 & 2500 Class outside screw and yoke rising spindle, non-rising hand wheel bolted bonnet
solid or flexible wedge, renewable body rings, removable spindle nut, valve can be repacked under pressure when in the full open position.

ITEM NO COMPONENT MATERIALS SPECIFICATION

1. BODY ASTM A216 Gr. WCB
2. BONNET ASTM A216 Gr. WCB
3. BODY RING * ASTM A105 WITH 13% CR FACING /
A217 Gr. CA15 / ASTM A276 TYPE 410
4. WEDGE * ASTM A105 WITH 13% CR FACING /
A217 Gr. CA15
5. STEM 13% CR/ASTM A276 TYPE 410/
ASTM A182 Gr F6
6. HEX. BOLT ASTM A193 Gr. B7
7. HAND WHEEL MALLEABLE IRON/SG IRON/STEEL
8. PACKING GRAPHITE
9. BONNET GASKET CSIG/SPIRALLY WOUND SS 304
WITH GRAPHITE FILLER
* STELLITE FACING AVAILABLE

INSPECTION AND TESTING API 598 REFERENCE STANDARDS

CLASS SHELL (PSIG SEAT (PSIG) DESIGN API 602/ISO 15761

150 450 315
300 1125 815 FACE TO FACE DIMENSIONS ASME B16.10
600 2250 1630
END FLANGE DIMENSIONS ASME B16.5
900 3350 2445
1500 5575 4080 BUTT WELDED END DIMENSIONS ASME B16.25
2500 9275 6790
AIR UNDER WATER - 80 PRESSURE - TEMPERATURE RATINGS ASME B16.5 / B16.34

DIMENSIONS ARE IN mm
SIZE(INCH) 1/2 3/4 1.0 1.1/2
L-RF/L1-BW 108 117 127 165
CLASS L2-RTJ - - 140 178
150 H 185 195 210 325
Ø HW 96 96 96 125
L-RF/L1-BW 152 178 203 229
CLASS L2-RTJ 163 191 216 242
300 H 185 195 210 325
Ø HW 96 96 96 125
L-RF/L1-BW 165 190 216 241
CLASS L2-RTJ 168 190 216 241
600 H 185 195 210 325
Ø HW 96 96 96 125
L-RF/L1-BW 216 229 254 305
CLASS L2-RTJ 216 229 254 305
900 H 195 225 245 370
Ø HW 96 125 150 150
L-RF/L1-BW 216 229 254 305
CLASS L2-RTJ 216 229 254 305
1500 H 195 225 245 370
Ø HW 96 125 150 150
L-RF/L1-BW 264 273 308 384
CLASS L2-RTJ 264 273 308 387
2500 H 290 335 345 450
Ø HW 150 200 200 200
For M.O.C. Refer Page No.27
For Flange Details Refer Page No.25
20
 150, 300, 600, 900,1500 & 2500 Cl. Cast Steel Globe Valves
SVPL Carbon steel 150, 300, 600, 900,1500, 2500 Class outside screw and yoke rising spindle, non-rising hand wheel bolted bonnet
solid or flexible wedge, renewable body rings, removable spindle nut, valve can be repacked under pressure when in the full open

ITEM NO COMPONENT MATERIALS

1. BODY ASTM A216 Gr. WCB
2. BONNET ASTM A216 Gr. WCB
3. DISC * ASTM A216 WCB WITH 13%
CR FACING / A217 Gr. CA15
4. BODY RING * 13% CR/ASTM/ A105 WITH 13%
CR FACING / A276 TYPE 410
5. DISC NUT 13% CR/ASTM A276 TYPE 410
6. SPINDLE 13% CR/ASTM A276 TYPE 410
7. BACK SEAT BUSH 13% CR/ASTM A276 TYPE 410
8. BONNET STUD BOLT ASTM A193 Gr B7
9. BONNET STUD BOLT NUT ASTM A194 Gr 2H
10. YOKE BUSH ASTM A439 TYPE D2
11 HANDLEWHEEL MALLEABLE IRON/SG IRON/STEEL
12. BONNET GASKET CSIG/SPIRALLY WOUND SS 304
WITH GRAPHITE FILLER
13. PACKING GRAPHITE
* STELLITE FACING AVAILABLE

INSPECTION AND TESTING API 598 REFERENCE STANDARDS

CLASS SHELL (PSIG SEAT (PSIG) DESIGN BS 1873 / API 623

150 450 315
300 1125 815 FACE TO FACE DIMENSIONS ASME B16.10
600 2250 1630
END FLANGE DIMENSIONS ASME B16.5 / BS1560
900 3350 2445
1500 5575 4080 BUTT WELDED END DIMENSIONS ASME B16.25
2500 9275 6790
AIR UNDER WATER - 80 PRESSURE - TEMPERATURE RATINGS B16.34 / BS 1560

DIMENSIONS ARE IN mm
SIZE(INCH) 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10.0 12.0
L-RF/L1-BW 165 203 216 241 292 406 495 622
CLASS L2-RTJ 178 216 229 254 305 419 508 635 711
150* H 335 355 385 425 515 635 765 925 1125
Ø HW 200 200 225 250 250 350 400 450 500
L-RF/L1-BW 229 267 292 318 356 460 559 622 711
CLASS L2-RTJ 242 283 308 334 372 460 575 638 727
300* H 355 395 430 575 585 735 850 1010 1220
Ø HW 200 200 225 250 350 400 500 600 600
L-RF/L1-BW 241 292 330 356 432 559 660 787 838
CLASS L2-RTJ 241 295 333 359 435 562 663 790 841
600* H 405 415 500 530 685 830 965 1150 1370
Ø HW 200 200 250 300 400 450 500 500 600
L-RF/L1-BW 305 368 419 381 457 610 737 838 965
CLASS L2-RTJ 305 371 422 384 460 613 740 841 968
900** H 480 529 676 669 775 959 1100 1315 1495
Ø HW 300 350 400 400 450 500 500 500 600
L-RF/L1-BW 305 368 419 470 546 705 832 991 1130
CLASS L2-RTJ 305 371 422 473 549 711 842 1001 1146
1500 *** H 480 529 676 771 918 1184 1225 1420 1615
Ø HW 300 350 400 450 500 500 500 600 600
L-RF/L1-BW 384 451 508 578 673 914 1022 1270 1422
CLASS L2-RTJ 387 454 514 584 683 927 1038 1292 1444
2500 *** H 595 715 815 936 1048 1300 1425 1550 1760
Ø HW 350 400 450 500 500 600 600 600 600
*SIZE - 12” & above are Gear Operated ***SIZE - 3” & above are Gear Operated For M.O.C. Refer Page No.27
**SIZE - 6” & above are Gear Operated For Flange Details Refer Page No.25
21
 BSEN ISO 15761 Class 800 Forged Steel Lift Check Valves
SVPL Forged Steel Class 800, disc and renewable body seat rings, bolted body and cover construction

MATERIAL SPECIFICATIONS

NO COMPONENT MATERIALS

1 BODY ASTM A105/A 182 F11/F22/F5/F9

2 COVER F304/F304L/F316/F316L/F 321

3 DISC* ASTM A276 TYPE 410/304/316/321

4 SEAT RING* ASTM A276 TYPE 410/304/316/3211

5 BODY BONNET BOLT ASTM A193 Gr. B7/B8/M/B16

INSPECTION AND TESTING ISO 12266 PI
6 GASKET Spiral wound S S 304/SS316/SS321
Shell Hyd. Seat Hyd. Low Prs. Seat
(Psig) (Psig) (Psig) with Graphite Filler

3000 2200 550 * Stellite F acing available

DIMENSIONS ARE IN mm

Description Valve size 15 20 25 40 50

End to End (L) 80 88 100 120 140
ISO 15761 Height (K) 60 75 95 105 115
Class 800
bolted bonnet Socket Bore (D) 21.70 27.05 33.80 48.65 61.10
Socket Weld/ 21.95 27.30 34.05 48.89 61.35
Screwed End
Socket Depth (A) 9.6 12.7 12.7 12.7 16
Throat Bore (d) 9.6 12.7 17.5 28.6 36.5

• End to End dimensions are in accordance with SVPL standard.

• Socket Welded and threaded end dimensions conform to ASME B 16.11 and ANSI B 2.1 respectively
• Valves comply with applicable requirements of API 602 and ISO 15761
• Flanged end and buttweld end valves are available.
• Buttweld ends are integral with the body, but flanges are welded to the body.
• Buttweld preparations and dimensions conform to ASME B16.25.

PRESSURE TEMPERATURE RATINGS

SERVICE -29 to 94 149 205 260 316 344 371 399 427 455 482 510 538 566 594 621 649 677 705 732 760 788 816
TEMP. C 38 O

A105 138.8 126.5 123.0 118.8 112.1 102.6 100.5 99.8 94.5 77.3 50.2 32.3 19.3 9.8
PRESSURE Kg / cm2

F22 140.6 134.2 126.9 121.6 119.8 113.5 110.3 106.5 99.8 95.2 91.4 84.3 70.6 50.2 37.2 21.1 19.3 10.2

F5 140.6 140.6 36.3 32.1 124.7 113.5 110.3 106.5 99.8 93.1 82.2 66.0 48.8 35.8 26.3 19.3 13.0 8.4

F304 134.9 112.4 99.1 88.2 81.9 77.9 76.6 75.5 74.5 733.8 72.7 72.0 70.33 60.4 58.0 48.1 36.5 29.1 20.7 15.3 11.6 9.1 6.6 4.5

F316 134.9 116.3 105.0 96.3 89.6 84.7 83.3 80.8 79.4 77.6 75.9 73.8 72.4 68.1 67.4 60.4 51.6 38.6 34.0 25.6 19.3 14.0 10.9 7.7
F-304L
112.4 94.9 85.0 77.3 71.7 67.4 95.7 64.3 62.9 61.5 60.4
F316L

22
 150, 300, 600, 900,1500 & 2500 Cl. Cast Steel Lift Check Valves
SVPL Carbon steel 150, 300, 600, 900,1500 & 2500 Class Lift Check Valve bolted cover

ITEM NO COMPONENT MATERIALS SPECIFICATION

1. BODY ASTM A216 Gr. WCB
2. COVER ASTM A216 Gr. WCB
3. BODY RING * ASTM A105 WITH 13% CR FACING /
A217 Gr. CA15 / ASTM A276 TYPE 410
4. DISC * ASTM A216 Gr. WCB WITH 13% CR
FACING/A217 Gr. CA15/ASTM A276
TYPE 410
5. HEX. BOLT ASTM A193 Gr. B7
6. COVER GASKET SPIRALLY WOUND SS 304 WITH
GRAPHITE FILLER
* STELLITE FACING AVAILABLE

INSPECTION AND TESTING API 598 REFERENCE STANDARDS

CLASS SHELL (PSIG SEAT (PSIG) Low Pressure DESIGN API 602/ISO 15761
Seat (PSIG)
150 450 315 80 FACE TO FACE DIMENSIONS ASME B16.10 / B2080
300 1125 815 215
END FLANGE DIMENSIONS ASME B16.5 / B1560
600 2250 1630 408
900 3350 2445 612 BUTT WELDED END DIMENSIONS ASME B16.25
1500 5575 4080 1020
2500 9275 6790 1698 PRESSURE - TEMPERATURE RATINGS ASME B16.34 / B1560

DIMENSIONS ARE IN mm
SIZE(INCH) 1/2 3/4 1.0 1.1/2

CLASS 150 L-RF/L1-BW 108 117 127 165

L2-RTJ - - 140 178
H 75 75 80 115

CLASS 300 L-RF/L1-BW 152 178 203 229

L2-RTJ 163 191 216 242
H 75 75 80 115

CLASS 600 L-RF/L1-BW 165 190 216 241

L2-RTJ 168 190 216 241
H 75 75 80 115

CLASS 900 L-RF/L1-BW 216 229 254 305

L2-RTJ 216 229 254 305
H 80 85 105 180

CLASS 1500 L-RF/L1-BW 216 229 254 305

L2-RTJ 216 229 254 305
H 80 85 105 180

CLASS 2500 L-RF 264 273 308 384

L2-RTJ 264 273 308 387
H 125 140 155 205
For M.O.C. Refer Page No.27
For Flange Details Refer Page No.25
23
 150, 300, 600, 900,1500 & 2500 Cl. Cast Steel Swing Check Valves
SVPL Carbon steel 150, 300, 600, 900,1500 & 2500 Class , Swing type disc, renewable body ring, bolted body and cover construction

ITEM NO COMPONENT MATERIALS

1. BODY ASTM A216 Gr. WCB

2. BONNET ASTM A216 Gr. WCB

3. BODY RING * ASTM A105 WITH

13% CR FACING / A217 Gr. CA15

4. DISC * ASTM A216 Gr. WCB WITH

13% CR FACING / A217 Gr. CA15

5. HINGE ASTM A216 Gr WCB / A217 Gr. CA15

6. BACKET ASTM A216 Gr WCB / A217 Gr. CA15

7. COVER STUD BOLT ASTM A 193 Gr B7

8. COVER STUD BOLT NUT ASTM A194 Gr 2H

9. COVER GASKET SPIRALLY WOUND SS 304 WITH

GRAPHITE FILLER

* STELLITE FACING AVAILABLE

INSPECTION AND TESTING API 598 REFERENCE STANDARDS

CLASS SHELL (PSIG SEAT (PSIG) Low Pressure DESIGN BS 1868

Seat (PSIG)
150 450 315 80 FACE TO FACE DIMENSIONS ASME B16.10 / B2080
300 1125 815 215
END FLANGE DIMENSIONS ASME B16.5 / B1560
600 2250 1630 408
900 3350 2445 612 BUTT WELDED END DIMENSIONS ASME B16.25
1500 5575 4080 1020
2500 9275 6790 1698 PRESSURE - TEMPERATURE RATINGS ASME B16.34 / B1560

DIMENSIONS ARE IN mm
SIZE(INCH) 1.5 2.0 2.5 3.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 24.0
CLASS 150 L-RF / L1-BW 165 203 216 241 292 356 495 622 698 787 864 978 978 1295
L2-RTJ 178 216 229 254 305 369 508 635 711 800 877 991 991 1308
H 140 170 180 190 210 255 305 380 415 480 510 575 620 660
CLASS 300 L-RF / L1-BW 241 267 292 318 356 444 533 622 711 838 864 978 1016 1346
L2-RTJ 254 283 308 334 372 460 539 638 727 854 880 994 1035 1368
H 160 175 190 220 230 300 340 400 485 515 570 630 675 745
CLASS 600 L-RF / L1-BW 241 292 330 356 432 559 660 787 838 889 991 1092 1194 1397
L2-RTJ 241 295 333 359 435 562 663 790 841 892 994 1095 1200 1407
H 165 185 200 225 280 350 410 475 520 580 645 690 755 790
CLASS 900 L-RF / L1-BW 305 368 419 381 457 610 737 838 965 1029 1130 1219 1321 1549
L2-RTJ 305 371 422 384 460 613 740 841 968 1039 1140 1232 1334 1568
H 219 251 267 259 281 359 419 451 489 629 664 750 830 880
CLASS 1500 L-RF / L1-BW 305 368 419 470 546 705 832 991 1130 1257 1384 1537 1664 1943
L2-RTJ 305 371 422 473 549 711 842 1001 1146 1276 1406 1559 1686 1971
H 219 251 267 329 378 467 510 593 673 740 780 845 915 995
CLASS 2500 L-RF / L1-BW 384 451 508 578 673 914 1022 1270 1422 - - - - -
L2-RTJ 387 454 514 584 683 927 1038 1292 1444 - - - - -
H 260 290 315 353 395 499 541 645 735 - - - - -
For M.O.C. Refer Page No.27
For Flange Details Refer Page No.25
24
 Dimensions of Steel Flanges
(ASME B16.5)
Size OD of Thickness Drilling Details Length of Bolt Dimension for RTJ Length Approx.
Dist
(inch) Flange of Flange RF Dia
of Stud Between
Class Dia of No. of Dia of Bolt Dia of
Bolt Holes
Stud Machined
Ring No.
OD of RF Groove Dimension
(for RTJ)
Bolt Circle Bolts (inch) (inch) Bolt Bolt (for RTJ) Pitch Dia Depth Width Radius Flgs.
O C R B d D L L K P E F r L A1
1½ 125 17.9 73.0 98.4 4 1/2 5/8 70 65 R19 82.50 65.07 6.35 8.74 0.8 85 4
2 150 19.5 92.1 120.7 4 5/8 3/4 85 70 R22 102.00 82.55 6.35 8.74 0.8 95 4
2½ 180 22.7 104.8 139.7 4 5/8 3/4 90 75 R25 121.00 101.60 6.35 8.74 0.8 100 4
3 190 24.3 127.0 152.4 4 5/8 3/4 90 75 R29 133.00 114.30 6.35 8.74 0.8 100 4
4 230 24.3 157.2 190.5 8 5/8 3/4 90 75 R36 171.00 149.23 6.35 8.74 0.8 100 4
CLASS 6 280 25.9 215.9 241.3 8 3/4 7/8 100 85 R43 219.00 193.68 6.35 8.74 0.8 115 4
8 345 29.0 269.9 298.5 8 3/4 7/8 110 90 R48 273.00 247.65 6.35 8.74 0.8 120 4
150 10 405 30.6 323.8 362.0 12 7/8 1 115 100 R52 330.00 304.80 6.35 8.74 0.8 125 4
12 485 32.2 381.0 431.8 12 7/8 1 120 100 R56 406.00 381.00 6.35 8.74 0.8 135 4
14 535 35.4 412.8 476.3 12 1 1.1/8 135 115 R59 425.00 396.88 6.35 8.74 0.8 145 3
16 595 37.0 469.9 539.8 16 1 1.1/8 135 115 R64 483.00 454.03 6.35 8.74 0.8 145 3
18 635 40.1 533.4 577.9 16 1.1/8 1.1/4 145 125 R68 546.00 517.53 6.35 8.74 0.8 160 3
20 700 43.3 584.2 635.0 20 1.1/8 1.1/4 160 140 R72 597.00 558.80 6.35 8.74 0.8 170 3
24 815 48.1 692.2 749.3 20 1.1/4 1.3/8 170 150 R76 711.00 673.10 6.35 8.74 0.8 185 3
1½ 155 21.1 73.0 114.3 4 3/4 7/8 90 75 R20 90.50 68.27 6.35 8.74 0.8 100 4
2 165 22.7 92.1 127.0 8 5/8 3/4 90 75 R23 108.00 82.55 7.92 11.91 0.8 100 6
2½ 190 25.9 104.8 149.2 8 3/4 7/8 100 85 R26 127.00 101.60 7.92 11.91 0.8 115 6
3 210 29.0 127.0 168.3 8 3/4 7/8 110 90 R31 146.00 123.83 7.92 11.91 0.8 120 6
4 255 32.2 157.2 200.0 8 3/4 7/8 115 95 R37 175.00 149.23 7.92 11.91 0.8 125 6
6 320 37.0 215.9 269.9 12 3/4 7/8 120 110 R45 241.00 211.12 7.92 11.91 0.8 140 6
CLASS 8 380 41.7 269.9 330.2 12 7/8 1 140 120 R49 302.00 269.88 7.92 11.91 0.8 150 6
10 445 48.1 323.8 387.4 16 1 1.1/8 160 140 R53 356.00 323.85 7.92 11.91 0.8 170 6
300 12 520 51.3 381.0 450.8 16 1.1/8 1.1/4 170 145 R57 413.00 381.00 7.92 11.91 0.8 185 6
14 585 54.4 412.8 514.4 20 1.1/8 1.1/4 180 160 R61 457.00 419.10 7.92 11.91 0.8 190 6
16 650 57.6 469.9 571.5 20 1.1/4 1.3/8 190 165 R65 508.00 469.90 7.92 11.91 0.8 205 6
18 710 60.8 533.4 628.6 24 1.1/4 1.3/8 195 170 R69 575.00 533.40 7.92 11.91 0.8 210 6
20 775 64.0 584.2 685.8 24 1.1/4 1.3/8 205 185 R73 635.00 584.20 9.53 13.49 1.5 220 6
24 915 70.3 692.2 812.8 24 1.1/2 1.5/8 230 205 R77 749.00 692.15 11.13 16.66 1.5 255 6
1½ 155 22.3 73.0 114.3 4 3/4 7/8 110 100 R20 90.50 68.27 6.35 8.74 0.8 110 4
2 165 25.4 92.1 127.0 8 5/8 3/4 110 100 R23 108.00 82.55 7.92 11.91 0.8 110 5
2½ 190 28.6 104.8 149.2 8 3/4 7/8 120 115 R26 127.00 101.60 7.92 11.91 0.8 120 5
3 210 31.8 127.0 168.3 8 3/4 7/8 125 120 R31 146.00 123.83 7.92 11.91 0.8 125 5
4 275 38.1 157.2 215.9 8 7/8 1 145 140 R37 175.00 149.23 7.92 11.91 0.8 145 5
6 355 47.7 215.9 292.1 12 1 1.1/8 170 165 R45 241.00 211.12 7.92 11.91 0.8 170 5
CLASS 8 420 55.6 269.9 349.2 12 1.1/8 1.1/4 190 185 R49 302.00 269.88 7.92 11.91 0.8 195 5
600 10 510 63.5 323.8 431.8 16 1.1/4 1.3/8 210 210 R53 356.00 323.85 7.92 11.91 0.8 215 5
12 560 66.7 381.0 489.0 20 1.1/4 1.3/8 215 215 R57 413.00 381.00 7.92 11.91 0.8 220 5
14 605 69.9 412.8 527.0 20 1.3/8 1.1/2 235 230 R61 457.00 419.10 7.92 11.91 0.8 235 5
16 685 76.2 469.9 603.2 20 1.1/2 1.5/8 255 250 R65 508.00 469.90 7.92 11.91 0.8 255 5
18 745 82.6 533.4 654.0 20 1.5/8 1.3/4 275 265 R69 575.00 533.40 7.92 11.91 0.8 275 5
20 815 88.9 584.2 723.9 24 1.5/8 1.3/4 285 280 R73 635.00 584.20 9.53 13.49 1.5 290 5
24 940 101.6 692.2 838.2 24 1.7/8 2 330 325 R77 749.00 692.15 11.13 16.66 1.5 335 6
1½ 180 31.8 73.0 123.8 4 1 1 1/8 140 . R20 92.00 68.27 6.35 8.74 0.8 140 4
2 215 38.1 92.1 165.1 8 7/8 1 145 - R24 124.00 95.25 7.92 11.91 0.8 145 3
2½ 245 41.3 104.8 190.5 8 1 1 1/8 160 - R27 137.00 107.95 7.92 11.91 0.8 160 3
3 240 38.1 127.0 190.5 8 7/8 1 145 . R31 156.00 123.83 7.92 11.91 0.8 145 4
4 290 44.5 157.2 235.0 8 1.1/8 1 1/4 170 - R37 181.00 149.23 7.92 11.91 0.8 170 4
6 380 55.6 215.9 317.5 12 1.1/8 1 1/4 190 - R45 241.00 211.12 7.92 11.91 0.8 195 4
CLASS 8 470 63.5 269.9 393.7 12 1.3/8 1 1/2 220 - R49 308.00 269.88 7.92 11.91 0.8 220 4
10 545 69.9 323.8 469.9 16 1.3/8 1 1/2 235 - R53 362.00 323.85 7.92 11.91 0.8 235 4
900 12 610 79.4 381.0 533.4 20 1.3/8 1 1/2 255 - R57 419.00 381.00 7.92 11.91 0.8 255 4
14 640 85.8 412.8 558.8 20 1.1/2 1 5/8 275 - R62 467.00 419.10 11.13 16.66 1.5 280 4
16 705 88.9 469.9 616.0 20 1.5/8 1 3/4 285 - R66 524.00 469.90 11.13 16.66 1.5 290 4
18 785 101.6 533.4 685.8 20 1.7/8 2 325 - R70 594.00 533.40 12.70 19.84 1.5 335 5
20 855 108.0 584.2 749.3 20 2 21/8 350 - R74 648.00 584.20 12.70 19.84 1.5 360 5
24 1040 139.7 692.2 901.7 20 2.1/2 2 5/8 450 - R78 772.00 692.15 15.88 26.97 2.4 455 6
1½ 180 31.8 73.0 123.8 4 1 1 1/8 140 . R20 92.00 68.27 6.35 8.74 0.8 140 4
2 215 38.1 92.1 165.1 8 7/8 1 145 - R24 124.00 95.25 7.92 11.91 0.8 145 3
2½ 245 41.3 104.8 190.5 8 1 1 1/8 160 - R27 137.00 107.95 7.92 11.91 0.8 160 3
3 265 47.7 127.0 203.2 8 1 1/8 1 1/4 180 - R35 168.00 136.53 7.92 11.91 0.8 180 3
4 310 54.0 157.2 241.3 8 1 1/4 1 3/8 195 - R39 194.00 161.93 7.92 11.91 0.8 195 3
6 395 82.6 215.9 317.5 12 1 3/8 1 1/2 260 - R46 248.00 211.14 9.53 13.49 1.5 265 3
8 485 92.1 269.9 393.7 12 1 5/8 1 3/4 290 - R50 318.00 269.88 11.13 16.66 1.5 325 4
CLASS 10 585 108.0 323.8 482.6 12 1 7/8 2 335 - R54 371.00 323.85 11.13 16.66 1.5 345 4
1500 12 675 123.9 381.0 571.5 16 2 21/8 370 - R58 438.00 381.00 14.27 23.01 1.5 385 5
14 750 133.4 412.8 635.0 16 21/4 2 3/8 400 - R63 489.00 419.10 15.88 26.97 2.4 425 6
16 825 146.1 469.9 704.8 16 21/2 2 5/8 440 . R67 546.00 469.90 17.48 30.18 2.4 470 8
18 915 162.0 533.4 774.7 16 2 3/4 2 7/8 490 - R71 613.00 533.40 17.48 30.18 2.4 525 8
20 985 177.8 584.2 831.8 16 3 31/8 535 - R75 673.00 584.20 17.48 33.32 2.4 565 10
24 1170 203.2 692.2 990.6 16 31/2 3 5/8 610 - R79 794.00 692.15 20.62 36.53 2.4 650 11
1½ 205 44.5 73.0 146.0 4 1 1/8 1 1/4 170 . R23 114.00 82.55 7.92 11.91 0.8 170 3
2 235 50.9 92.1 171.4 8 1 1 1/8 180 . R26 133.00 101.60 7.92 11.91 0.8 180 3
2½ 265 57.2 104.8 196.8 8 1 1/8 1 1/4 195 - R28 149.00 111.13 9.52 13.49 0.8 205 3
3 305 66.7 127.0 228.6 8 1 1/4 1 3/8 220 - R32 168.00 127.00 9.53 13.49 1.5 230 3
CLASS 4 355 76.2 157.2 273.0 8 1 1/2 1 5/8 255 . R38 203.00 157.18 11.13 16.66 1.5 260 4
2500 6 485 108.0 215.9 368.3 8 2 21/8 345 - R47 279.00 228.60 12.70 19.84 1.5 355 4
8 550 127.0 269.9 438.2 12 2 21/8 380 - R51 340.00 279.40 14.27 23.01 1.5 395 5
10 675 165.1 323.8 539.8 12 21/2 2 5/8 490 - R55 425.00 342.90 17.48 30.18 2.4 510 6
12 760 184.2 381.0 619.1 12 2 3/4 2 7/8 540 - R60 495.00 406.40 17.48 33.32 2.4 560 8
(Dimensions are mm unless specified
25
 Pressure-Temperature Rating (Valves In PSIG)
Cast Steel Valves
MAXIMUM ALLOWABLE NON - SHOCK PRESSURE, PSIG ASME B16.34
SERVICE DEG F -20 to 100 200 300 400 500 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200
TEMPERATURE DEG C -29 to 38 93 149 204 260 316 343 371 399 427 454 482 510 538 566 593 621 649
WCB(1) 285 260 230 200 170 140 125 110 95 80 65 50 35 20 - - - -
LCB(2) 265 250 230 200 170 140 125 110 95 80 65 50 35 20 - - - -
WC1 (1) (3) 265 260 230 200 170 140 125 110 95 80 65 50 35 20 - - - -
CLASS WC6(3)(5) 290 260 230 200 170 140 125 110 95 80 65 50 35 20 - - - -
150 C5(3) 290 260 230 200 170 140 125 110 95 80 65 50 35 20 - - - -
C12(3) 290 260 230 200 170 140 125 110 95 80 65 50 35 20 - - - -
CF8(4) 275 230 205 190 170 140 125 110 95 80 65 50 35 20 - - - -
CF8M(4) 275 235 215 195 170 140 125 110 95 80 65 50 35 20 160 145 115 90
WCB(1) 740 675 655 635 600 550 535 535 505 410 270 170 105 50 - - - -
LCB(2) 695 655 640 620 585 535 525 520 475 390 270 170 105 50 - - - -
WC1 (1) (3) 695 680 655 640 620 605 590 570 530 510 485 450 280 165 - - - -
CLASS WC6(3)(5) 750 750 720 695 665 605 590 570 530 510 485 450 320 215 145 95 60 40
300 C5(3) 750 745 715 705 665 605 590 570 530 510 485 370 275 200 145 100 60 35
C12(3) 750 750 730 705 665 605 590 570 530 510 485 450 375 255 170 115 75 50
CF8(4) 720 600 540 495 465 435 430 425 415 405 3958 390 380 320 310 255 200 155
CF8M(4) 720 620 560 515 480 450 445 430 425 420 420 415 385 350 345 305 235 185
WCB(1) 1480 1350 1315 1270 1200 1095 1075 1065 1010 825 535 345 205 105 - . . .
LCB(2) 1390 1315 1275 1235 1165 1065 1045 1035 945 780 535 345 205 105 - - - -
WC1 (1) (3) 1390 1360 1305 1280 1245 1210 1175 1135 1065 1015 975 900 560 330 - - - -
CLASS WC6(3)(5) 1500 1500 1445 1385 1330 1210 1175 1135 1065 1015 975 900 640 430 290 190 125 75
C5(3) 1500 1490 1430 1410 1330 1210 1175 1135 1055 1015 965 740 550 400 290 200 125 70
600
C12(3) 1500 1500 1455 1410 1330 1210 1175 1135 1065 1015 975 900 755 505 345 225 150 105
CF8(4) 1440 1200 1080 995 930 875 860 850 830 805 790 780 765 640 615 515 400 310
CF8M(4) 1440 1240 1120 1025 955 900 890 870 855 845 835 830 775 700 685 610 475 370
WCB(1) 2220 2025 1970 1900 1795 1640 1610 1600 1510 1235 805 515 310 155 - . . .
LCB(2) 2085 1970 1915 1850 1745 1600 1570 1555 1420 1175 805 515 310 155 - - - -
WC1 (1) (3) 2085 2035 1955 1920 1865 1815 1765 1705 1595 1525 1460 1350 845 495 - - - -
CLASS WC6(3)(5) 2250 2250 2165 2080 1995 1815 1765 1705 1595 1525 1460 1350 955 650 430 290 185 115
C5(3) 2250 2235 2150 2115 1995 1815 1765 1705 1585 1525 1450 1110 825 595 430 300 185 105
900
C12(3) 2250 2250 2185 2115 1995 1815 1765 1705 1595 1525 1460 1350 1130 760 515 340 225 155
CF8(4) 2160 1800 1620 1490 1395 1310 1290 1275 1245 1210 1190 1165 1145 965 925 770 595 465
CF8M(4) 2160 1860 1680 1540 1435 1355 1330 1305 1280 1265 1255 1245 1160 1050 1030 915 710 555
WCB(1) 3705 3375 3280 3170 2995 2735 2685 2665 2520 2060 1340 860 515 260 - - - -
LCB(2) 3470 3280 3190 3085 2910 2665 2615 2590 2365 1955 1340 860 515 260 - - - -
WC1 (1) (3) 3470 3395 3260 3200 3105 3025 2940 2840 2660 2540 2435 2245 1405 825 - - - -
CLASS WC6(3)(5) 3750 3750 3610 3465 3325 3025 2940 2840 2660 2540 2435 2245 1595 1080 720 480 310 190
1500 C5(3) 3750 3725 3580 3530 3325 3025 2940 2840 2640 2540 2415 1850 1370 995 720 495 310 170
C12(3) 3750 3750 3640 3530 3325 3025 2940 2840 2660 2540 2435 2245 1885 1270 855 565 375 255
CF8(4) 3600 3000 2700 2485 2330 2185 2150 2125 2075 2015 1980 1945 1910 1605 1545 1285 995 770
CF8M(4) 3600 3095 2795 2570 2390 2255 2220 2170 2135 2110 2090 2075 1930 1750 1720 1525 1185 925
WCB(1) 6170 5625 5470 5280 4990 4560 4475 4440 4200 3430 2230 1430 860 430 - - - -
LCB(2) 5785 5470 5315 5145 4850 4440 4355 4320 3945 3260 2230 1430 860 430 - - - -
WC1 (1) (3) 5785 5660 5435 5330 5180 5040 4905 4730 4430 4230 4060 3745 2345 1370 - - - -
WC6(3)(5) 6250 6250 6015 5775 5540 5040 4905 4730 4430 4230 4060 3745 2655 1800 1200 800 515 315
CLASS
C5(3) 6250 6205 5965 5880 5540 5040 4905 4730 4400 4230 4030 3085 2285 1655 1200 830 515 285
2500 C12(3) 6250 6250 6070 5880 5540 5040 4905 4730 4430 4230 4060 3745 3145 2115 1430 945 630 430
CF8(4) 6000 5000 4500 4140 3880 3640 3580 3540 3460 3360 3300 3240 3180 2675 2570 2145 1655 1285
CF8M(4) 6000 5160 4660 4280 3980 3760 3700 3620 3560 3520 3480 3460 3220 2915 2865 2545 1970 1545

NOTE: (1) Upon prolonged exposure to temperature above 800° F, the carbide phase of steel may be converted to graphite.
Permissible, but not recommended for prolonged use above 800 deg. F
(2) Not to be used over 650° F
(3) Use Normalized and Tempered material only.
(4) Attemperatureover 1000deg.F,useonlywhenthecarboncontentis0.04%orhigher.
(5) Not to be used over 1100° F
26
 Material of Construction
COMPONENT SPECIFICATIONS
BODY
BONNET ASTM A217.WC1 ASTM A217.WC6 ASTM A217. WC9 ASTM A 217. C5 HSTMA217. C12
BODY SEAT
RING STELLITED STELLITED STELLITED STELLITED STELLITED
WEDGE/DISC
SPINDLE ASTM A276 TYPE 410/ ASTM A276TYPE410/ ASTM A 276 TYPE 410/ ASTM A276 TYPE 410/ ASTM A276 TYPE 410/
ALLOY STEEL

A 182 Gr F6 A 182 Gr F6 A 182 Gr F6 A 182 Gr F6 A 182 Gr F6

BACK SEAT
BUSH ASTM A276TYIPE 410 ASTM A276 TYPE 410 ASTM A 276 TYPE 410 ASTM A 276 TYPE 410 ASTM A 276 TYPE 410
COVER STUD ASTM A193 GrB16 ASTM A193 GrB16 ASTM A193 GrB16 ASTMA193GrB16 ASTM A193GrB16
COVER
STUD NUT ASTM A194 Gr4 ASTM A194 Gr4 ASTM A194 Gr4 ASTMA194Gr4 ASTM A194Gr4
GASKET SPIRAL WOUND SS 304 SPIRAL WOUND SS 316 SPIRAL WOUND SS 304 SPIRALWOUND SS 316 SPIRALWOUND SS 316
WITH GRAPHITE FILLER WITH GRAPHITE FILLER WITH GRAPHITE FILLER WITH GRAPHITE FILLER WITH GRAPHITE FILLER
GLAND
PACKING GRAPHITE GRAPHITE GRAPHITE GRAPHITE GRAPHITE
HAND MALLEABLE IRON/ MALLEABLE IRON/ MALLEABLE IRON/ MALLEABLE IRON/ MALLEABLE IRON/
WHEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL
BODY
BONNET ASTM A351.GrCF8 ASTM A 351. GrCF8C ASTMA351.Gr.CF8M/ CF3M ASTM A351. GrCF3 ASTM A 890. Gr. 4A
BODY SEAT
RING ASTM A 351 .GrCF8/ ASTM A 351 .GrCF8C/ ASTM A 351.GrCF8M/ ASTM A 351 .GrCF3/ ASTM A 276 UNS
WEDGE/DISC STELLITED STELLITED CF3M STELLITED STELLITED S31803
STAINLESS STEEL

SPINDLE ASTM A276 TYPE 304 ASTM A276 TYPE321 ASTM A 276 TYPE 316/ ASTM A276 TYPE 304L ASTM A 276 UNS
(NO CASTING) (NO CASTING) 316L (NO CASTING) (NO CASTING) S31803
BACK SEAT
BUSH ASTM A276 TYPE 304 ASTM A276 TYPE 321 ASTM A 276 TYPE 316/316L ASTM A 276 TYPE 304L ASTM A 276 UNS S31803
COVER STUD ASTM A 193 GrB7 ASTMA193GrB7 ASTMA193GrB7 ASTM A193 GrB7 ASTM A 320 Gr. L7
COVER
STUD NUT ASTM A 194 Gr2H ASTMA194Gr2H ASTMA194Gr2H ASTM A194 Gr2H ASTM A 194 Gr. 4
GASKET SPIRAL WOUND SS 304 SPIRAL WOUND SS 321 SPIRALWOUND SS 316/316L SPIRAL WOUND SS304L PIRALWOUND INC0NEL
WITH GRAPHITE FILLER WITH GRAPHITE FILLER WITH GRAPHITE FILLER WITH GRAPHITE FILLER X 750 UNS N07750 WITH
GRAPHITE FILLER
GLAND
PACKING GRAPHITE GRAPHITE GRAPHITE GRAPHITE GRAPHITE
HAND MALLEABLE IRON/ MALLEABLE IRON/ MALLEABLE IRON/ MALLEABLE IRON/ MALLEABLE IRON/
WHEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL
BODY
BONNET ASTM A 352. GrLCB ASTM A 216. GrWCB
BODY
SEAT RING STELLITED ASTM A 216. GrWCB+ Note:
WEDGE/DISC 13% CR. STEEL FACING We can also provide :
SPINDLE ASTM A276 TYPE 304 ASTM A276 TYPE 410/
CARBON STEEL

• Valves to Hydrogen service requirement

A 182 Gt F6
with Impact tested properties
BACK SEAT
BUSH ASTM A276 TYPE 304 ASTM A276 TYPE 410 • Valves to NACE application to
COVER STUD ASTM A320 GrL7 ASTM A193 GrB7 MR-01-75
COVER • Valves to Caustic, Sour Service, etc.,
STUD NUT ASTM A194 Gr4 ASTM A194 Gr2H
GASKET SPIRAL WOUND SS 304 SPIRAL WOUND SS 304 • Bolting Material for SS valves with A193
WITH GRAPHITE FILLER GRAPHITE FILLER Gr B8/B8M/A194 Gr 8/Gr 8M
GLAND PTFE IMPREGNATED
• Steam jacketted valves in Gate, Globe,
PACKING WITH ASBESTOS GRAPHITE
Check construction.
HAND
WHEEL MALLEABLE IRON/CARBON STEEL MALLEABLE IRON/CARBON STEEL

27
 Butt - Welding Ends for Cast Steel Valves
(ASME B16.25)

Welding Ends Details for Cast Components

For use with Continuous Rectangular or Tapered Backing Ring

B = Nominal Inside Diameter of Pipe

t = Nominal Pipe Wall Thickness
C = B + 0.251 - 0.41
A = Outside Diameter (Cast Steel Valves)

Nominal Pipe Size 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
A-inches 3.59 4.62 5.78 6.78 8.78 10.94 12.97 14.25 16.25 18.28 20.31 24.38

Class 150 and 300 valves 12-inch and smaller are regularly machined Orders for Class 150 and 300 butt-welding valves 14- inch and
as shown In two upper illustrations. Unless otherwise specified, larger... and for Class 400 and higher valves in all sizes ... must specify
ends are bored to match Schedule 40 pipe in valves 10-inch and the inside diameter of the pipe with which the valves will be used,
smaller and Standard wall pipe (0.375" thick) in 12 inch valves and the type of backing ring required.

Other types of weld end preparation can be furnished when specified.

28
 ACCESSORIES

Electric Motor Actuators

Electric Motor Actuators are available for
valves which are in accessibly located, or
where emergency may require rapid, positive
operation from a remote point. SVPL can
supply electric motor actuators for each type
of SVPL Cast SteelValves when required.

Gear Actuators
Auxiliary gearing is often desirable to
facilitate the operation of large size valves
required to close against high pressure. SVPL
Cast Steel Valves can be furnished with a fully
enclosed light weight and maintenance free
bevel or worm gear actuators.

Gate Valve with Lock open /

close arrangement
SVPL Gate Valves with rising stem and fixed
handwheel can be provided with a locking
device to secure the wedge in either open
or closed position.
Our Globe Valves also can be provided with
locking arrangement.

Chainwheels
Chainwheels can be furnished complete with
chainwheel and chain guide. They are means
of safe and convenient floor operation of
valves in overhead or inaccessible locations.

Floor Stands & Valve Extensions

SVPL Floor Stands are of cast iron or
fabricated steel and are available with or
without an indicator. They are furnished
with rising or nonrising stem and, if so
ordered, equipped with an extension stem.
All stands are regularly furnished coated
and are faced on bottom and drilled. Gear
and motor control floor stands can also be
furnished if required.
29
 Marking & Instruction for Installation & Storage of
Steel Valves

Marking
SVPL valves are easily identified by a nameplate and valve body
markings.
All markings are per MSS SP-25.
All nameplates are securely attached to the handwheel or valve
cover.

RSHANI VALVES PVT

UDA LTD
SO

Instructions for Installation & Storage

Prior to installation, confirm that there are no scratches on the Also, it is preferable to use globe valves in full opened or
surfaces of flanges and stems. Clean the inside of valves with a dry completely closed positions, but to some extent, flow controlling is
cloth. Especially the surfaces of the seats are the most important possible. Howeve^rif it is used in slightly opened position when
portion for obtaining effective valve function. Special attention pressure difference is large, high speed flow may erode the seat
should be paid so as not to scratch and/or damage these surfaces. portion.
When moving the valves after unpacking, confirm that the valves If the valves are to be used for flow controlling purposes, it is
are in a completely closed position. If valves are in open position, better to adopt needle disc type valves which corresponds to the
disc may move and surfaces of seat may be damaged or some conditions or flow control valves.
foreign matter may enter the valves and further, unexpected All of our valves will close when handwheels are turned clock-
accidents may occur by the rotation of handwheel. wise, and will open when turned counter-clockwise.
When installing, confirm the marking of the valves and nameplate
located at the top of handwheel (Rating, size, Material and Flow Storage
direction) in order to avoid mistakes. It is recommended that cases/crates delivered to the job site be
As the flow directions of fluids of check valves and globe valves are stored inside of a warehouse under dry and normal
fixed, installation shall be made in accordance with an arrow atmospheric conditions and temperatures.
showing the flow direction, with care. If the above method is impossible, the valves may be stored on
Welding and heat treatment of the weld-end type valves shall be wooden shelves in the warehouse, under dry and cool
performed at slightly opened position from fully closed, which is conditions, untill the valves are put to use.
the position where disc and seat are in very light contact. Further, The protected surfaces shall be kept without removing plastic
for local annealing, cease the heating within required range and be covers or waterproof tape in order to prevent entry of foreign
careful not to overheat the seat portion. Also, welding slag and matter into the valve while the valves are stored.
spatter are to be completely removed and cleaned, special
The valves shall not be stored in the outdoors or dusty place.
attention should be paid because the majority of the causes of
Fine sand which may come into the valve will cause damage to
leakage on valve seats are seat portions damaged by weld spatter,
the seat surfaces.
galling of welding slag and sinter.
When the valves are stored for a long time, it is recommended
Gate valves should be used in fully opened or completely closed that after applying suitable oil for rust prevention the valves are
position. If they are used in slight or half-opened position , vibration stored in the indoors of good ventilation.
of discs may occur at high speed flow and will cause pulsation of
the flowTherefore, do not apply gate valves for flow control Avoid storing valves directly on the ground or on concrete
purposes. floors. Keep valves away from moisture.
30
 Valve Specifying Checklist

SVPL will work closely with you to define your valve needs and specify the product to meet those needs. Use the list below as a guide to
some of the many factors you'll need to consider in making an important valve purchase. Knowing this criteria will help the valve
manufacturer or their distributor to design and/or select the best valve for your particular application.

Application Valve Requirements

• Media Being Handled • Type of Valve
(e.g., liquid, gas, slurry or solid)
(e.g., Gate, Globe, Check, Plug Etc,)
• Corrosiveness of Media
(e.g.,pH, concentration) • Valve Size
• Corrosiveness of Atmosphere • End Connections
• Flow (e.g., Flanged, RF/RTJ & Buttweld)
(Velocity, Capacity, Cv, Direction)
• Pressure Class
• Pipe Size (e.g., ANSI Class 150, 300, 600)
• Media Temperature
(Max-Min) • Materials of Construction
(e.g., Carbon Steel, Alloy Steel, Stainless Steel or
• Pressure
--Maximum Operation Pressure other special alloys.)
--Maximum Differential Pressure --Body
• Operation --Trim
(e.g., Manual/Automatic, On-Off/Throttling) --Seats
• Installation Constraints --Bolting
--Envelope Dimensions • Frequency of operation
--Weight
--Accessibility • Packing
(Type and Material)
• Conformance to Appropriate Standards
(e.g., API, ANSI, BS, Din, etc.) • Special Requirements
• Tightness of Shutoff Required (e.g., Testing Tagging, Coating)
Valve Actuation • Accessories
• Type (e.g., Stem/Shaft Extensions, Locking Device, Position
(e.g., Manual, Electric, Pneumatic, Hydraulic) Indicator, Jacketing)
• Motion Required
--Rotary, (e.g., Quarter-Turn, Multi-Turn)
--Linear Service Requirements
• Mode of Operation
• Testing
--Double Acting
--Spring Return, (Spring-To-Closed, Spring-To-Open) • Source Inspection
• Required Valve Operating Thrust or Torque • Availability or Replacement Valves,
• Power Supply Actuators or Parts
(e.g.,Voltage, Available Air Supply)
• Documentation
• On/Off, Throttling or Proportional Control
(e.g., Certified Prints, Dimension Drawings)
• Corrosive Resistance
(materials, Coating, Tubing) • Installation and Maintenance Instruction
• Speed of Operation • Delivery Requirements
• Frequency of Operation (e.g., Timing, Packaging)
• Special Requirements
• Availability of Engineering Service
(e.g., Tagging, Testing)
(e.g., Application, Field, Factory)
• Accessories
(e.g., Limit Switches, Positioner, Solenoid Valve, Transducers,
Manual Override)
31
S.F. No 69/3E, Kuttai thottam, Athipalayam Road, Chinnavedampatti
Coimbatore. 641049 India Tel: +91 9884016750/9841029197
E-mail: @gmail.com www.soudarshinivalve.com
SVPL / 001 / June 2018

Registered Office:
136/2, Ajanta Flats, 7th Avenue, Anna Nagar West Chennai - 600040