Product Highlights: Data Sheet
Product Highlights: Data Sheet
Product Highlights: Data Sheet
Product Highlights
Integrated Network Management: Ethernet Fault Management:
For GPON, POTP, PTN, DWDM & SDH • Y.1731, Link Trace & Loopbacks
• NMS intiated fault localization
Point & Click Provisioning - Automatic Path
Computation QoS
• On MPLS-TP & VLAN based services
Multiple Graphical Views
• CIR/PIR configuration
• Fiber view, logical links
• QoS domains
• Carrier Ethernet Circuits, Services
ERPS
MPLS-TP
• Planning & Provisioning
• Planning & Provisioning
• Ringlets
• Pseudowire service, VPLS, H-VPLS
• Open ERPS
Integrated Management: The TJ5500 integrates MPLS-TP Services: The TJ5500 can be used to
Tejas GPON, PTN, DWDM, OTN and SDH manage MPLS-TP tunnels and pseudowires.
portfolios into one management system. The MPLS-TP based VPLS services can also be
TJ500 understands parallel TDM & PTN provisioned. The TJ5500 affords a lot of flexibility
deployment models or PTN overlays over TDM. in the deployment models for these services by
Thus, the end user sees an end-to-end PTN allowing a large array of options for these
network where some of the links can be Ethernet services. VPLS services can be either a full mesh
over TDM and appear as logical links in the of pseudowires or a hub & spoke model (H-
Packet Network view. VPLS). The pseudowires can be either
unprotected or protected, span multiple tunnels,
Partitioning: The network can be split into
and be multi-segment or stitched in addition to
multiple partitions for better management of
manual & autopath selection. MPLS-TP linear
large networks. User Defined Partitions can be
protection ensures a sub-50ms switchover for any
created and a subset of the network can be
network failures and dual homing protects
assigned to the partition. Bulk node additions,
against gateway failures. Seamless provisioning
deletions and circuit provisioning are supported
across native-Ethernet links and Ethernet-over-
per partition. Alarms and historical performance
TDM, single-click activation and deactivation of
data can also be viewed and analysed per
services are also supported. The status of each
partition.
tunnel is monitored through CFM - LBM/LTM &
Y.1731. The NMS automatically correlates the
alarms with Links and Services.
QoS Management: NMS can manage the QoS
for both MPLS-TP and VLAN-based services.
The entire network can be partitioned into QoS
and non-QoS domains. 8 classes of service are
supported and bandwidth profiles for CIR
(Committed Information Rate) and PIR (Peak
Information Rate) can be assigned to individual
services. Connection admission control ensures
that the packets not meeting the bandwidth
profiles are either dropped immediately or
Point & Click Provisioning: The TJ500 supports colored, so that they can be dropped later in case
drag and drop provisioning between two end of congestion in the network.
points. It automatically computes the least cost Views: The TJ5500 supports multiple views for
path based on a few parameters like number of viewing and managing different aspects of the
hops or links. It displays the status of circuits as network. The Management View displays all the
Planned, Provisioned or Pending, thus giving the EMSs present in the network. Network View
network operator a workflow while provisioning (Nodes) displays the nodes present in a particular
& commissioning a circuit. partition. Resource Management View helps to
create partitions, add nodes through auto-
discovery and VNE provisioning. Graphical view
of Carrier Ethernet network displays physical
topology, Ethernet services, MPLS-TP tunnels,
pseudowires and their work and protection
paths. All these help the operator get a quick
bird’s eye view of the network.
TJ5500 Intuitive End-to-End Network Management
Technical Specifications
General Packet Features
• Multi-layered Integrated Management • MPLS-TP Tunnels & Pseudowires
• Easy & Intuitive GUI to configure all Tejas • ERPS Ring Configuration
Products • End-to-End Ethernet OAM provisioning, SLA
• Organize the network into Partitions Monitoring, based on Y.1731
• NMS initiated link-trace and loopback checks
Configuration Management for fault isolation and verification
• Auto-Discovery of NEs • Ethernet Performance Data
• Management VLAN for in-band • Historical Performance Data Reports
communication • Per Port Rate Limiting & Metering
• Static Routes and IS-IS configuration for • Packet Classification & Coloring
reach ability to remote network elements • Policing & Discarding packets at Egress
• Display Physical Link and Logical • Per Service Shaping at Egress
connectivity map • Provisioning of MEF Services like ELine & ELAN
• Classification and Filtering rules on a per ELAN
Provisioning service basis
• Support for SDH, MPLS-TP, DWDM and Views
OTN Services
Topology View displaying fiber connectivity and
• Shortest Path Computation for
virtual topology links
provisioning optimal paths
• Real time update for faults and alarms showing
• DNI Configuration as per G.842
link availability
• Edit Path, Endpoints, Protection Paths &
• Partition View : Split the network into user
Bandwidth
defined partitions
• Bridge & Roll for hitless editing of paths
• View Logical links within a partition and
Service Management between partitions
• Carrier Ethernet Network Graphical View -
• Point & Click Provisioning for P2P
Display physical topology, Rings, Services,
Ethernet Service Provisioning
Tunnels, Work and Protect Paths
• Traffic Filtering based on CVLAN, SVLAN,
Priority, Ports/Interface Protection
• Port Mirroring Configuration • Pre-planned backup restoration path for
protection against multiple network failures
Fault Management • 1+1 Hot Standby configuration of NMS
• Real Time Alarm View
• Custom Alarm Filtering Rules Security
• Alarm Correlation: Only primary alarm is • NMS Level Users with Role based Authorization
displayed and secondary alarms are Control
filtered • Force logout all users by Administrator
• Audit log for all logins, logouts, operational
Performance Monitoring commands
• Real Time Performance Data Collection • Force logout all users by Administrator
• Performance Reports at 15 minute, daily, • Audit log for all logins, logouts, operational
weekly or monthly intervals commands
*Specifications are subject to change without notice