User Manual

For AUDI

Android Auto Apple CarPlay

Specifications
Panel description

Toggle Switch
CAN Power

CAN Power For power cable connection, CAN data transmission

Antenna Wifi antenna connector

360 IN
USB Camera USB data transmission, and for reverse/front camera conenction
Antenna USB Camera LVDS OUT LVDS IN

LVDS OUT Connect with cable labelled ‘LVDS-OUT-CIC’

LVDS IN Connect with cable labelled ‘LVDS-CIC-C19’

Toggle switch Refer DIP code setting to set for different car models

360 IN Exterior 360 input(VGA signal input)

Specification Features
>Support wireless/wired Carplay connection
Input USB/CVBS signal input
>Support wireless/wired Android auto function (some mobile phones)
Input Voltage 12-16V DC >Support wireless Airplay function

Rated Current 2A
>Support wired Autolink function
>Compatible with OEM microphone and external microphone
Rated Power 24W
>Support EQ adjustment,lossless sound quality

Control Voice control, iDrive control >Support HDMI input

>Support USB to play audio file &video, support firmware upgrade
Material Housing aluminum
>Keep the OEM system function, reversing radar and track display
Accessories

LVDS-CPCAR1702C-All AV-USB-GP68 Antenna

Main harness for different car models

Main Harness Main Harness Main Harness Main Harness Main Harness
CAN-GPXI1701-A6 CAN-GPXI1701-A7C CAN-GPXI1701-A8 CAN-GPXI1701-Q3S CAN-GPXI1701-Q5U
DIP Switch Setting

OFF

7 8
ON

ON :  OFF : 
 Connection Diagram

Carplay connection for A4/A5/Q5 NO MMI

Note:
1.The area that is marked by blue color can 't be bent or broken,which
probably has effect on the original car system,can't boot.(Fig1)
2.Pay attention to the direction of FPC while plugged in slots as the
② show in pics.(Fig2)
Carplay connection for Q3
Carplay connection for A8
Carplay connection for A3/A4/A5/Q5
Reverse camera wirng connection and settings

Automatic transmission：
1. Connect the reverse camera to CVBS OUT labeled 'Reverse
camera'
2. Connect the cable labeled '12V reverse camera(yellow)' to
camera power
3. Setting → Reverse → Reverse camera → Aftermarket
Manual transmission

1. Connect the reverse camera to CVBS OUT labeled

'Reverse camera'
2. Setting → Reverse → Reverse camera → Aftermarket
 Apple Car Play
Wireless carplay connection
1. Turn on WIFI (Fig.1)
2. Turn on Bluetooth (Fig.2), and connect Carplay's bluetooth (Fig.3/4)
3. After the bluetooth connection is completed, the following prompts will pop up, click 'Allow-Use carplay' (Fig.5/6)

① ② ③
⑦

Bluetooth

④ ⑤ ⑥

Pair Allow Use carplay

4. After the connection is successful, it will enter Carplay automatically(Fig.7/8)

Wireless Android auto connection
1. Turn on WIFI (Fig.1)
2. Turn on Bluetooth (Fig.2)
3. Search the Android phone's bluetooth on the screen in Carplay system(Fig.3/4/5)
4. Pair the bluetooth with your phone.(Fig.6)
5. After connecting the bluetooth, it will pop up the following prompts(Fig.7/8)
6. Then it will enter Android auto automatically(Fig.9)
Wired Android auto connection
1. Download Android auto APP on your Android phone(Fig.1).
2. Click 'WireAuto' icon(Fig.2), the prompt 'Please connect your Android device' will pop up(Fig.3).
3. Plug your phone to USB port. then it will enter Android auto automatically(Fig.4).
① ②

Wireless Airplay connection

1. Click 'Airplay' icon first (Fig.1), the pairing information with the phone will be displayed (Fig.2)
Note: If you have connected Carplay before,
2. Search wifi signal of Airplay and conenct you need to disconnect Carplay first!
3. Turn on Airplay (Fig3/4)
Wired Autolink connection

1. Download Android auto APP on your Android phone(Fig.1).

2. Click 'Autolink' icon(Fig.2), the prompt 'Please connect your Android device' will pop up(Fig.3).
3. Plug your phone to USB port(Fig.4). then it will enter Android auto automatically(Fig.5).

① ②

④ ⑤

③
 Activation by original buttons
Apple Car Play

1
2

Audi A6 3G MMI Controller

Button Function Operation Remarks

Press the button 3 seconds Order : OEM → Car Play

1 Changing
Modes
Press the button short time Return to the OEM mode in any modes.
NAV
Apple Car Play Function
2 2 Move the
pointer
Turn the dial
1 Dial Google Android Auto

Move the
Touch the pad Google Android Auto
pointer Up,Down
3 Touch Pad
Apple Car Play Function
3 Go back Press the button
Google Android Auto
Back
Audi A4 3G MMI Controller 4 "Siri"
Apple Car Play Function
Press the button 3 seconds
"Google Assistant"
1 4 Voice Google Android Auto

Tip：car models with different switch definition

1. Q5 high config,Q7,A6,A8 : NAV button
2. Q5 low config: NAV button CAR button MEDIA button INFO button
3. A3 B9 Q3: MEDIA button

Audi A6 3G MMI Steering Wheel Buttons

Setting instruction:
 FAQ
1.Q: What need to be paid attention to during installation?
A: 1) Make sure that the carplay box is compatible with the installed model, and check whether the label of box matches with the car model
2) Power off during installation
3) After the installation is complete, it is best to lock the car for a few minutes to turn it on, wait until the running test is normal, then restore
the car

2.Q: While switching to carplay, the screen displays no signal,yellow screen, abnormal screen or no response?
A: 1) Check whether the wiring is connected according to the wiring diagram

2) If the wiring connection is normal but the display is not normal, check if the pins of the lvds cable ports are bent or not in contact, you
need to re-plug it
3) Check whether the dip switch code is correct, after each change, re-plug the box's can power cable
4) If the dip switch code and wiring connection are normal after inspection, box still switches to the black screen, contact with the saler for
a solution

3. Q: I don’t have sound when I connect carplay, what can I do?

A 1) if your car has AUX function, set on OEM system
2) No AUX on your car, you need to buy AMI-to-AUX cable to get sound
4. Q:When I call someone, he can hear himself, how to do? ①

A:solution1

1) There are 4 default options available(Fig.1)

2) Try one by one,after changing the setting, restart to take effect

A:solution2
1) Adjust the volume of the original car to normal use
2) Turn the volume in ’audio‘ setting to 13(Fig.2)

3) Turn the ’Microphone Volume‘ to 12

4) 'Microphone OP' tune from 0 until no echo is heard
5) Adjust 'AEC quality' to 2
6) If the caller hears the echo interval for a long time, fine-tune the 'Microphone delay
7) If the caller hears a small voice, you can fine-tune the ’Microphone Volume‘ and ’Microphone PGA'
5. Q: Solutions to not being able to connect with carplay？
A: can try to use the solutions below separately or together

1) Click on carplay bluetooth or wifi on the mobile phone

2) At the same time, clear the Bluetooth devices on the mobile phone and the car, and then pair and connect
3) Go to WirelessDev to reset the Bluetooth, and then pair and (Fig.1)

① ② ③

4) Restore the mobile network to the mobile phone

5) Check whether the carplay on the mobile phone is turned on (Fig.2)
6) Siri permissions are all turned on(Fig.3)
7) If necessary, check the antenna (whether it is broken, or attached to the metal, stay away from the box)
6. Q:can I connect wireless Android auto with my huawei mate 20?
A:The following phone models support wireless Android auto

7. Q:I install the carplay, but the button on steering wheel can’t work?
A:1)Set the setting ‘Enable wheel key’ to ON(Fig.1) ①
2) Short press the voice botton or long prss 5s the ok button on idrive
knob to activate siri

8. Q:Siri function can not be used

A: 1) Check whether has turned the siri access permissions on iphone,turn all the options on
2) Turn the function of steering wheel on in carplay switch page setup
3) If can activate the Siri but Siri cant receive the command，please check whether the mic
works first，if no problem with mic, check the Bluetooth of iphone，disconnect it from
original car bluetooth