This document is the user manual for an FCC ID: 2AREL-WE300 wireless extender/access point. It provides instructions on setup, including connecting to an existing WiFi network by selecting the network and entering the password. It also describes the status indicator lights and a reset procedure. Setup involves plugging the device in, joining the extender's WiFi network, accessing the setup page via a web browser, selecting the home network, and inputting the password.
This document is the user manual for an FCC ID: 2AREL-WE300 wireless extender/access point. It provides instructions on setup, including connecting to an existing WiFi network by selecting the network and entering the password. It also describes the status indicator lights and a reset procedure. Setup involves plugging the device in, joining the extender's WiFi network, accessing the setup page via a web browser, selecting the home network, and inputting the password.
This document is the user manual for an FCC ID: 2AREL-WE300 wireless extender/access point. It provides instructions on setup, including connecting to an existing WiFi network by selecting the network and entering the password. It also describes the status indicator lights and a reset procedure. Setup involves plugging the device in, joining the extender's WiFi network, accessing the setup page via a web browser, selecting the home network, and inputting the password.
This document is the user manual for an FCC ID: 2AREL-WE300 wireless extender/access point. It provides instructions on setup, including connecting to an existing WiFi network by selecting the network and entering the password. It also describes the status indicator lights and a reset procedure. Setup involves plugging the device in, joining the extender's WiFi network, accessing the setup page via a web browser, selecting the home network, and inputting the password.
User Manual WPS Press this button and the WPS button of end device within 2 minutes, then connect immediately.
Connection Status No connection： Weak reception： Good reception: Excellent reception: Need to setup or move Signal strength below than 25% Signal strength 25% to 75% Signal strength 75%-100% closer to the router (move closer to the router) (Right distance) ( move away to the router)
ON OFF Blink Device Device is working well Power-on self-test or WPS in process device error
Internet Device can not be connected Device is connected
with internet with internet
RESET Press this button for 5 seconds to restore to factory setting
Getting started 2.Join the wifi SSID: WIRELESS-XXXX by
mobile phone ; and the password 3. Scan the below QR code or enter http:// 4.Select the language and wireless.repeater at address bar , then click "Enter". 1.Plug into the outlet(near the is null. input username: admin and password: router) and waiting 40 seconds. admin, you will get into the setup page.
Settings WLAN WIRELESS.REPEATER
WLAN
WIRELESS-001 B i Log in to wireless.repeater
admin CHOOSE A NETWORK... admin
Cancel Log In ChinaNet-zglx i
OFFICE-2.4G i
OFFICE-5G i
5. After entering the setting page, just select 6.Please click the button at bottom to Frequently asked and answers your home wifi router and input your home finish the setup, the repeater will wifi router password (change ssid and restart. Now you can join it to enjoy the internet. How do enter setup page again? password of extender if need), then click "Next". You can enter the setting page at anytime. 802.11n 300M Wireless Extender/AP (In case you can't enter, have other Please select the router which you want to connect methods: Re-plug the device and power it 、 and input the password(if need),the click “Next”. on, use your mobile phone to connect SSID H3C_AB1395 (WIRELESS-XXXX) Then input http://wireless. TEST-2.4G repeater to enter into setup page, input WiFi883 usename:admin and password:admin. OURLINK-5484(2.4G) T800 WIRELESS-9596 How do go back to factory setting? OURLINK-MESH-2.4 Pantum-AP-F48D90 Please hold the Reset Button for 5 seconds to TP-LINK_37C2 reset the device. ChinaNet-iTpE ChinaNet-vuBR ChinaNet-VRfT xy2
Password of router: 12345678
Name of Extender: WIRELESS-EB05 Password of Extender:
Hacking : A Comprehensive, Step-By-Step Guide to Techniques and Strategies to Learn Ethical Hacking with Practical Examples to Computer Hacking, Wireless Network, Cybersecurity and Penetration Testing
