Sena WiFi Adapter for 50 Series Sena 50 Utility App Upgrading the Firmware of the Main Unit

Quick Start Guide ENGLISH • Download the Sena 50 Utility App to set up the WiFi The firmware will be upgraded automatically while your main
Adapter to automatically upgrade your main unit. unit is charging. If you want to manually upgrade the firmware,
Android: Google Play Store > Sena 50 Utility change the setting on the Sena 50 Utility App.
iOS: App Store > Sena 50 Utility
Note:
• Save time updating the firmware on the main unit with the
Sena 50 Utility App and enjoy your adventure even more! Do not disconnect the WiFi Adapter while upgrading the
firmware. The product may be damaged.

Pinhole Factory Reset Button

Connection Setup
LED Description
1. Open the Sena 50 Utility App.

2. Click the top left Menu button and select the “WiFi
Adapter” menu.

3. Follow the instructions on the Sena 50 Utility App to

Note:
To change the WiFi access point, perform the Factory
Reset then repeat the steps above.

LED
Indicators
Charging Status
USB USB-C
Connector Connector Firmware Upgrade Status

WiFi Status

1 2.1.0 2 3
 Charging Status Powering On Factory Reset
Disconnected Insert the USB Connector into a USB charger port that is If you want to restore the WiFi Adapter to the factory default
connected to a power source. settings, you can easily reset the unit:
Charging (The main unit is powered off.) 1. Gently insert a paper clip into the hole on the back of the
unit and lightly press and hold the Pinhole Factory Reset
Fully charged Button for more than 1 second (1), and then release the
button (2).

Note:
Note:
2
Charging (The main unit is powered on.) 1. Any 3rd party USB charger (5 V/1 A) can be used with
WiFi Adapter if the charger is approved by either the
To upgrade the firmware, power off the main unit. FCC, CE, IC or other locally approved.
HOLD
2. Do not connect the WiFi Adapter to a USB port on 1s 1
your PC.
Firmware Upgrade Status
Disconnected or no firmware upgrade available

Upgrading firmware
Connecting to the Main Unit
2. The WiFi Adapter will automatically restart with the three
Insert the USB-C Connector into the main unit’s USB-C port. LEDs on.
Firmware upgrade completed
Note:
The WiFi Adapter will be restored to factory default
settings which include the WiFi configuration setup, the
WiFi Status firmware setup and the language setup.

Disconnected from an WiFi access point

Note:
Searching for WiFi access point
If you leave the main unit on when connecting it, the
charging LED on the WiFi Adapter will blink red slowly.
Sena Technologies, Inc.
Connected to an access point
Customer Support: sena.com

4 5