Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 198 views

    Rosemount Radar Master

    Uploaded by

    Zosimo Palomino Huaccamayta
    This configuration report shows the parameter settings for a level transmitter with tag 1V420, including device information, factory setup values, analog output settings, protected probe parameters, HART specific setup, tank setup, and additional diagnostic parameters. The device is configured for interface level measurement using a submerged probe in a 3 inch pipe with a tank height of 49 inches. The report provides values for gain, offset, measurement units, output sources, serial numbers and other configuration details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Rosemount Radar Master

    Uploaded by

    Zosimo Palomino Huaccamayta
    198 views2 pages
    This configuration report shows the parameter settings for a level transmitter with tag 1V420, including device information, factory setup values, analog output settings, protected probe parameters, HART specific setup, tank setup, and additional diagnostic parameters. The device is configured for interface level measurement using a submerged probe in a 3 inch pipe with a tank height of 49 inches. The report provides values for gain, offset, measurement units, output sources, serial numbers and other configuration details.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This configuration report shows the parameter settings for a level transmitter with tag 1V420, including device information, factory setup values, analog output settings, protected probe parameters, HART specific setup, tank setup, and additional diagnostic parameters. The device is configured for interface level measurement using a submerged probe in a 3 inch pipe with a tank height of 49 inches. The report provides values for gain, offset, measurement units, output sources, serial numbers and other configuration details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    198 views2 pages

    Rosemount Radar Master

    Uploaded by

    Zosimo Palomino Huaccamayta
    This configuration report shows the parameter settings for a level transmitter with tag 1V420, including device information, factory setup values, analog output settings, protected probe parameters, HART specific setup, tank setup, and additional diagnostic parameters. The device is configured for interface level measurement using a submerged probe in a 3 inch pipe with a tank height of 49 inches. The report provides values for gain, offset, measurement units, output sources, serial numbers and other configuration details.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Configuration Report - [1V420]

    Parameter
    Value
    Device Information
    Protocol HART
    Address 0
    Device Tag 1V420
    Device Type 5300
    Version 2M1
    Unit ID 570572
    Time Stamp 2023-05-20 15:06:45
    Factory Setup
    My Address1 -1
    Txl 72.1 in
    Rel Impulse Ampl 13.227891
    Base Line Calib 2067
    Timing Calib 121
    Nom Ref Pulse Dist 79.2 in
    Nom Ref Pulse Ampl 378 mV
    Mainboard Serial No 147251
    Nom Int Pulse Dist 43.0 in
    Analog Out Factory Setup
    Loop Gain Calib 0 4.278076
    Loop Offset Calib 0 111.526367
    Loop Non Lin Coeff 0 0.000018
    LRB Lo Curr Current 3.96 mA
    LRB Lo Curr Voltage 2428 mV
    LRB Hi Curr Current 19.97 mA
    LRB Hi Curr Voltage 577 mV
    Protected parameters
    Probe Type Rigid Single 0.5" (13mm)
    Probe Length 49.0 in
    HART Specific Setup
    Output Source (PV) Interface Level
    Output Source (SV) Interface Level
    Length Unit inch
    Volume Unit bbl
    Temperature Unit °F
    Level Rate Unit inch/min
    W Hart Version 7
    Date 25/01/2023
    Message
    Descriptor
    Tag 1V420

    LCD Setup
    LCD Parameters.AOut Current True
    LCD Parameters.Interface Level True
    Tank Setup
    Tank Height (R) 49.0 in
    Device Functions and Value Presentation.Calculate Signal Quality MetricsTrue
    Auto Conf Meas Func.Use Automatic Surface Threshold False
    Measurement Mode Interface Level with submerged probe
    Pipe/Chamber/Nozzle Inner Diameter 3 in.
    Mounting Type Pipe/Chamber
    Factory2
    Nom Int Pulse Ampl 192 mV
    Analog Out Setup
    Upper Range Value AOut 1 1.0922
    Factory Scratch
    Initial Device Model 5302
    Initial SW Revision 38600960
    Manufacturing Date 20230125
    Scratch Pad3 4
    Scratch Pad4 5132356
    Spec
    Factory Password 12345
    Number of Default Writes 2
    Internal Status.Config Changed True
    Internal Status.Config Changed 2 True
    Internal Status.Config Changed inv False
    Internal Status.Config Changed 2 inv False
    Start Code 1 419177654
    Start Code 2 -2050628954
    Housing No 345143
    Serial No 570572
    Bit Ctrl
    Configuration Limited
    Sip Aux
    Enhanced Fid Elim Ctrl.Reserved True
    ATP Curve parameters (raw)
    Signal ID 1
    Bin to Dist 2.1 in
    Zero Dist -0.9 in

    You might also like