Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    SikaTop 10

    Uploaded by

    Premier Steel Limited

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SikaTop 10

    Uploaded by

    Premier Steel Limited
    14 views3 pages

    Original Title

    SikaTop-10

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views3 pages

    SikaTop 10

    Uploaded by

    Premier Steel Limited

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    PRODUCT DATA SHEET

    SikaTop®-10
    WATER BASED PRIMER FOR CEMENTITIUOUS SUBSTRATES

    PRODUCT DESCRIPTION CHARACTERISTICS / ADVANTAGES


    ▪ Primer based on synthetic resin on styrene acrylic co- ▪ Excellent adhesion on porous and vitreous substrates
    polymers, with mineral fillers. ▪ Prevents loss of water into the substrate
    ▪ Part of the Sika® EmotionFloor range for cementiti- ▪ Economic
    uous substrates and tiles. ▪ Increases durability
    ▪ Resistant to alkaline pH
    USES ▪ Ready to use
    ▪ Easy to use
    ▪ Particularly for use as primer for SikaDecor®-803 ▪ For substrates with higher moisture content
    Nature
    ▪ On mineral substrates, cementitious coatings and old
    ceramic tiles
    ▪ Not suitable for horizontal surfaces

    PRODUCT INFORMATION
    Chemical Base Styrene acrylic copolymers with mineral fillers
    Packaging Pail: 5 kg 20kg
    Full pallet: 96 x 5 kg (480 kg) 33 x 25 kg (660 kg)

    Appearance / Colour Reddish with fillers


    Shelf Life In undamaged original sealed packaging: 12 months from date of produc-
    tion
    Storage Conditions Storage temperature between +5 °C and +30 °C. Protect from freezing.
    Store in dry conditions.
    Density ~ 1.32 kg/I (+20 °C)

    Viscosity ~ 13 770 mPas (+20 °C, Brookfield S64, 20 rpm)

    SYSTEM INFORMATION
    System Structure Please refer to the product datasheet of:
    SikaDecor®-803 Nature: For Sika® EmotionFloor applied as
    decorative wall coating

    Product Data Sheet


    SikaTop®-10
    December 2016, Version 01.01
    020815120010000061

    1/3
    APPLICATION INFORMATION
    Consumption ~ 0.2 - 0.5 kg/m2/layer

    Some substrates require higher consumption than indicated.

    These figures are theoretical and do not allow for any additional material
    due to surface porosity, surface profile, variations in level or wastage etc.
    Ambient Air Temperature Min. +10 °C, max. +30 °C
    The temperature during curing must not fall below the minimal temperat-
    ure.
    Substrate Temperature Min. +10 °C, max. +30 °C
    The temperature during curing must not fall below the minimal temperat-
    ure.
    Substrate Moisture Content Can be installed on substrates with higher moisture content. No ponding
    water. The substrate needs to be visibly dry.
    Curing Time Before applying SikaDecor®-803 Nature on SikaTop®-10 allow
    Substrate Temperature Minimum Maximum
    +20 °C 1 hour -
    Times are approximate and will be affected by changing ambient condi-
    tions particularly temperature and relative humidity.

    APPLICATION INSTRUCTIONS CLEANING OF TOOLS

    SUBSTRATE QUALITY / PRE-TREATMENT Clean all tools and application equipment with water
    immediately after use. Hardened and/or cured materi-
    Substrate quality al can only be removed mechanically.
    The substrate must be sound and of sufficient
    strength. LIMITATIONS
    Clean and free of all contaminants such as dirt, oil, In hot weather (above +25 °C) store SikaTop®-10 prior
    grease, coatings and surface treatments etc. to use in cool place.

    Pre-treatment At low temperatures (below +15 °C) the product may


    The substrates must be prepared mechanically using thicken and reduced workability.
    abrasive blast cleaning or scarifying equipment to
    achieve an open textured surface. Do not use a product that has been subjected to frost.

    Tiles must be grinded. In case of doubt, you must apply a trial area first.

    All dust, loose and friable material must be com- VALUE BASE
    pletely removed from all surfaces before application of
    the product, preferably by brush or vacuum. All technical data stated in this Product Data Sheet are
    based on laboratory tests. Actual measured data may
    MIXING vary due to circumstances beyond our control.

    SikaTop®-10 is supplied ready to use. LOCAL RESTRICTIONS


    Homogenize the material prior to application for at Please note that as a result of specific local regula-
    least 1 minute. tions the performance of this product may vary from
    country to country. Please consult the local Product
    Use an electrical low speed stirrer (300 - 400 rpm). Data Sheet for the exact description of the application
    fields.
    APPLICATION
    Apply by brush or roller to achieve greater penetra- ECOLOGY, HEALTH AND SAFETY
    tion and performance.
    For information and advice on the safe handling, stor-
    age and disposal of chemical products, users shall refer
    to the most recent Safety Data Sheet (SDS) containing
    physical, ecological, toxicological and other safety-re-
    lated data.

    Product Data Sheet


    SikaTop®-10
    December 2016, Version 01.01
    020815120010000061

    2/3
    LEGAL NOTES
    The information, and, in particular, the recommenda-
    tions relating to the application and end-use of Sika
    products, are given in good faith based on Sika’s cur-
    rent knowledge and experience of the products when
    properly stored, handled and applied under normal
    conditions in accordance with Sika’s recommenda-
    tions. In practice, the differences in materials, sub-
    strates and actual site conditions are such that no war-
    ranty in respect of merchantability or of fitness for a
    particular purpose, nor any liability arising out of any
    legal relationship whatsoever, can be inferred either
    from this information, or from any written recom-
    mendations, or from any other advice offered. The
    user of the product must test the product’s suitability
    for the intended application and purpose. Sika re-
    serves the right to change the properties of its
    products. The proprietary rights of third parties must
    be observed. All orders are accepted subject to our
    current terms of sale and delivery. Users must always
    refer to the most recent issue of the local Product Data
    Sheet for the product concerned, copies of which will
    be supplied on request.

    SIKA LIMITED SIKA IRELAND LIMITED


    Watchmead Ballymun Industrial Estate
    Welwyn Garden City Ballymun
    Hertfordshire, AL7 1BQ Dublin 11, Ireland
    Tel: 01707 394444 Tel: +353 1 862 0709
    Web: www.sika.co.uk Web: www.sika.ie
    Twitter: @SikaLimited Twitter: @SikaIreland

    SikaTop-10_en_GB_(12-2016)_1_1.pdf

    Product Data Sheet


    SikaTop®-10
    December 2016, Version 01.01
    020815120010000061

    3/3

    You might also like