Ps 700

T E C H N I C A L D ATA
P/S 700 Firewall Sealant

Description Performance Properties
P/S 700 is a high temperature primerless firewall ( Ty p i c a l )
sealant. It has a service temperature range from Cured 14 days @ 77°F (25°C), 50% RH
-65°F (-54°C) to 400°F (204°C), and will withstand
Cured specific gravity 1.36
flash temperatures of 2000°F (1093°C). The material
is designed for sealing firewall structures against the Nonvolatile content, % 70
passage of air and vapors. Ultimate cure hardness,
P/S 700 is a two-part, synthetic rubber compound. Durometer A 75
The uncured material is a low sag paste suitable for Peel strength, pli (N/25 mm), 100% cohesion
application by extrusion gun or spatula. It cures at Dry, 14 days @ 77°F (25°C), 50% RH
room temperature to form a resilient sealant to com- QQ-A-250/4 (Aluminum) 12 (53)
mon aircraft substrates. MIL-S-5059 (Stainless steel) 12 (53)
The following tests are in accordance with MIL-S- Dry, 72 hours @ 400°F (204°C),
38249 Type I specification test methods. QQ-A-250/4 (Aluminum) 15 (67)
MIL-S-5059 (Stainless steel) 15 (67)
Application Properties
Thermal rupture resistance - Retains pressure of 5 psi
(typical)
with only negligible deformation, both before and
Color after flame test @ 2000°F (1093°C).
Part A Brown
Low temperature flexibility @ -65°F (-54°C) - No
Part B Black
cracking, checking or loss of adhesion.
Mixed Black
Corrosion resistance - No corrosion, adhesion loss,
Mixing ratio Part A:Part B
softening, or blistering after 20-day immersion in 3%
By weight 2.5:100
salt water solution @ 140°F (60°C).
Base viscosity
Resistance to other fluids - Excellent resistance to
(Brookfield #7 @ 2 rpm),
water, alcohols, petroleum-base and synthetic lubri-
Poise (Pa-s) 12,000 (1200)
cating oils.
Slump, inches (mm) 0.20 (5.08)
Flame resistance - No flame penetration after 15 min-
Application life and cure time @ 77°F (25°C), 50% RH utes @ 2000°F (1093°C).
Cure time Note: The application and performance property val-
Application Tack free to 30 A ues above are typical for the material, but not intend-
life time Durometer ed for use in specifications or for acceptance inspec-
(hours) (hours) (hours) tion criteria because of variations in testing methods,
2 <4 48 conditions and configurations.
W h e r e S m a r t S o l u t i o n s Ta k e F l i g h t ®
P/S 700 Firewall Sealant
Surface Preparation Health Precautions
Immediately before applying sealant to primed sub- This product is safe to use and apply when recom-
strates, the surfaces should be cleaned with solvents. mended precautions are followed. Before using this
Contaminants such as dirt, grease, and/or processing product, read and understand the Material Safety
lubricants must be removed prior to sealant applica- Data Sheet (MSDS), which provides information on
tion. health, physical and environmental hazards, handling
A progressive cleaning procedure should be employ- precautions and first aid recommendations. An MSDS
ed using the appropriate solvents and new lint-free is available on request. Avoid overexposure. Obtain
cloth (Reclaimed solvents or tissue paper should not medical care in case of extreme overexposure.
be used.) Always pour solvent on the cloth to avoid For industrial use only. Keep away from children.
contaminating the solvent supply. Wash one small
For emergency medical information call
area at a time.
1-800-228-5635.
It is important that the surface is dried with a second
Additional information can be found at:
clean cloth prior to the solvent evaporating to prevent
www.ppgaerospace.com
the redeposition of contaminants on the substrate.
For sales and ordering information call
Substrate composition can vary greatly. This can
1-800-AEROMIX (237-6649).
affect sealant adhesion. It is recommended that
adhesion characteristics to a specific substrate be
determined prior to application on production parts
or assemblies.
For a more thorough discussion of proper surface
preparation, please consult the SAE Aerospace
Information Report AIR 4069. This document is avail-
able through SAE, 400 Commonwealth Avenue,
Warrendale, PA 15096-0001.
Mixing Instructions
P/S 700 is supplied in a two-part kit. Mix according
to the ratios indicated in the application properties
section. Mix Part A and Part B separately to uniformi-
ty, then thoroughly mix entire contents of both parts
of the kit together taking care to avoid leaving
unmixed areas around the sides or bottom of the
mixing container.
Storage Life
The storage life of P/S 700 is at least 12 months
when stored at temperatures below 80°F ( 27°C) in
original, unopened containers.
All recommendations, statements, and technical data contained herein are based on tests we believe to be reliable
PRC-DeSoto International, Inc.
and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a war-
12780 San Fernando Road
ranty, either expressed or implied. User shall rely on his own information and tests to determine suitability of the
Sylmar, CA 91342
product for the intended use and assumes all risks and liability resulting from his use of the product. Seller’s and manu-
Telephone (818) 362-6711
facturer’s sole responsibility shall be to replace that portion of the product of this manufacturer which proves to be
Toll Free (800) AEROMIX
defective. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss, or dam-
www.ppgaerospace.com
age directly or indirectly resulting from use of, or inability to use, the product. Recommendations or statements other
than those contained in a written agreement signed by an officer of the manufacturer shall not be binding upon the
Issue Date: 04/10
manufacturer or seller.
Supersedes: 09/09
Lit: 0104
Printed in U.S.A.

Ps 700

Uploaded by

Copyright:

Available Formats

Ps 700

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ps 700

Uploaded by

Copyright:

Available Formats

T E C H N I C A L D ATA

P/S 700 Firewall Sealant

You might also like