Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    C9400-LC-24S ZPCBST Pass Uut Spirent Log

    Uploaded by

    JP Maxx
    The document describes configuration and testing of two ports using Spirent TestCenter. Port 1 is configured to transmit traffic across 5 streams to Port 2, and Port 2 is configured to transmit traffic back to Port 1 across the same 5 streams. The configuration sets frame sizes, MAC/IP addresses, and conditions to verify frame counts between ports and streams. Traffic is started and results are shown to pass all configured verification conditions.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    C9400-LC-24S ZPCBST Pass Uut Spirent Log

    Uploaded by

    JP Maxx
    38 views6 pages
    The document describes configuration and testing of two ports using Spirent TestCenter. Port 1 is configured to transmit traffic across 5 streams to Port 2, and Port 2 is configured to transmit traffic back to Port 1 across the same 5 streams. The configuration sets frame sizes, MAC/IP addresses, and conditions to verify frame counts between ports and streams. Traffic is started and results are shown to pass all configured verification conditions.

    Original Title

    C9400-LC-24S zpcbst pass uut spirent log

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes configuration and testing of two ports using Spirent TestCenter. Port 1 is configured to transmit traffic across 5 streams to Port 2, and Port 2 is configured to transmit traffic back to Port 1 across the same 5 streams. The configuration sets frame sizes, MAC/IP addresses, and conditions to verify frame counts between ports and streams. Traffic is started and results are shown to pass all configured verification conditions.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    38 views6 pages

    C9400-LC-24S ZPCBST Pass Uut Spirent Log

    Uploaded by

    JP Maxx
    The document describes configuration and testing of two ports using Spirent TestCenter. Port 1 is configured to transmit traffic across 5 streams to Port 2, and Port 2 is configured to transmit traffic back to Port 1 across the same 5 streams. The configuration sets frame sizes, MAC/IP addresses, and conditions to verify frame counts between ports and streams. Traffic is started and results are shown to pass all configured verification conditions.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 6

    SNT> quit

    Cleaning up the Spirent TestCenter module...


    log4cplus:ERROR No appenders could be found for logger (user.scripting).
    log4cplus:ERROR Please initialize the log4cplus system properly.
    [gen-apollo@jpeapp27 snttc_linux4.77]$ cd /tftpboot/spirent/snttc_linux4.77
    [gen-apollo@jpeapp27 snttc_linux4.77]$ pwd
    /tftpboot/spirent/snttc_linux4.77
    [gen-apollo@jpeapp27 snttc_linux4.77]$ ./snttc tc
    ###################################################################################
    #################
    #
    #
    # ___ ___ ___ ___ ___
    #
    # /\ \ /\__\ /\ \ /\ \ /\ \
    #
    # /::\ \ /::| | \:\ \ \:\ \ /::\ \
    #
    # /:/\ \ \ /:|:| | \:\ \ \:\ \ /:/\:\ \
    #
    # _\:\~\ \ \ /:/|:| |__ /::\ \ /::\ \ /:/ \:\ \
    #
    # /\ \:\ \ \__\ /:/ |:| /\__\ /:/\:\__\ /:/\:\__\ /:/__/ \:\__\
    #
    # \:\ \:\ \/__/ \/__|:|/:/ / /:/ \/__/ /:/ \/__/ \:\ \ \/__/
    #
    # \:\ \:\__\ |:/:/ / /:/ / /:/ / \:\ \
    #
    # \:\/:/ / |::/ / \/__/ \/__/ \:\ \
    #
    # \::/ / /:/ / \:\__\
    #
    # \/__/ \/__/ \/__/
    #
    #
    #
    #
    #
    # #########################################
    #
    # #########-#####################-#########
    #
    # #########-#####################-#########
    #
    # #########-#####################-#########
    #
    # #######-#-#-#################-#-#-#######
    #
    # #######-#-#-#################-#-#-#######
    #
    # #######-#-#-#################-#-#-#######
    #
    # #####-#-#-#-#-#############-#-#-#-#-#####
    #
    # ###-#-#-#-#-#-#-#########-#-#-#-#-#-#-###
    #
    # #-#-#-#-#-#-#-#-#-#####-#-#-#-#-#-#-#-#-#
    #
    #
    #
    #
    #
    #
    -----------------------------------------------------------------------------------
    ------------- #
    # Spirent Communications - SNTtc
    #
    # Version: 3.1.1
    #
    # Build Date: August 8, 2016
    #
    # Author: Matthew Jefferson
    #
    # Maintainer: Matthew Jefferson (matt.jefferson@spirent.com)
    #
    #
    -----------------------------------------------------------------------------------
    ------------- #
    # TCL Version: 8.4.19
    #
    # OS: Linux
    #
    # PID: 63550
    #
    #
    -----------------------------------------------------------------------------------
    ------------- #
    #
    #
    #
    #
    ###################################################################################
    #################

    Temporary Directory: /opt/cisco/tftpboot/spirent/snttc_tests/temp/snt_tempdir63550

    -----------------------------------------------------------------------------------
    -------------
    SNTtc Module - TC
    Full Name: Spirent TestCenter
    Version: 4.29.0
    Build Date: September 13, 2017
    -----------------------------------------------------------------------------------
    -------------
    Spirent TestCenter Automation Version 4.77.1796.0000
    -----------------------------------------------------------------------------------
    -------------
    SNT>
    SNT> config C9400-LC-24S_l2_1g.snt
    SNT> config t
    apply -breakportlocks true
    SNT(config)> port create Ethernet 2
    clear counter
    SNT(config-prt-1)> port 1
    SNT(config-prt-1)> reserve 10.79.155.202:3:3
    SNT(config-prt-1)> port 2
    show ports
    SNT(config-prt-2)> reserve 10.79.155.202:3:4
    SNT(config-prt-2)> end
    SNT> apply -breakportlocks true
    SNT> conf t
    SNT(config)> port 1
    SNT(config-prt-1)> stream create 5 eth-ip
    SNT(config-prt-1-str-1-5)> stream 1
    SNT(config-prt-1-str-1)> set FixedFrameLength 64
    SNT(config-prt-1-str-1)> set load 12.00
    SNT(config-prt-1-str-1)> stream 2
    SNT(config-prt-1-str-2)> set FixedFrameLength 299
    SNT(config-prt-1-str-2)> set load 20.00
    SNT(config-prt-1-str-2)> stream 3
    SNT(config-prt-1-str-3)> set FixedFrameLength 512
    SNT(config-prt-1-str-3)> set load 20.00
    SNT(config-prt-1-str-3)> stream 4
    SNT(config-prt-1-str-4)> set FixedFrameLength 1518
    SNT(config-prt-1-str-4)> set load 20.00
    SNT(config-prt-1-str-4)> stream 5
    SNT(config-prt-1-str-5)> set framelengthmode random
    SNT(config-prt-1-str-5)> set maxframelength 1518
    SNT(config-prt-1-str-5)> set minframelength 64
    SNT(config-prt-1-str-5)> set load 20.00
    SNT(config-prt-1-str-5)> stream all
    SNT(config-prt-1-str-all)> set filltype prbs
    SNT(config-prt-1-str-all)> set loadunit PERCENT_LINE_RATE
    SNT(config-prt-1-str-all)> set ipv4.sourceAddr 11.11.11.11
    SNT(config-prt-1-str-all)> set ipv4.destAddr 1.1.1.1
    SNT(config-prt-1-str-all)> set eth.srcmac 00:00:00:00:00:01
    SNT(config-prt-1-str-all)> set eth.dstmac 00:0D:0D:0D:0D:0D
    SNT(config-prt-1-str-all)> mod add step ipv4.sourceAddr 5000 0.0.0.1
    SNT(config-prt-1-str-all)> mod add step eth.srcMac 5000 1
    SNT(config-prt-1-str-all)> exit
    SNT(config-prt-1)> port 2
    SNT(config-prt-2)> stream create 5 eth-ip
    SNT(config-prt-2-str-1-5)> stream 1
    SNT(config-prt-2-str-1)> set FixedFrameLength 64
    SNT(config-prt-2-str-1)> set load 12.00
    SNT(config-prt-2-str-1)> stream 2
    SNT(config-prt-2-str-2)> set FixedFrameLength 299
    SNT(config-prt-2-str-2)> set load 20.00
    SNT(config-prt-2-str-2)> stream 3
    SNT(config-prt-2-str-3)> set FixedFrameLength 512
    SNT(config-prt-2-str-3)> set load 20.00
    SNT(config-prt-2-str-3)> stream 4
    SNT(config-prt-2-str-4)> set FixedFrameLength 1518
    SNT(config-prt-2-str-4)> set load 20.00
    SNT(config-prt-2-str-4)> stream 5
    SNT(config-prt-2-str-5)> set framelengthmode random
    SNT(config-prt-2-str-5)> set maxframelength 1518
    SNT(config-prt-2-str-5)> set minframelength 64
    SNT(config-prt-2-str-5)> set load 20.00
    SNT(config-prt-2-str-5)> stream all
    SNT(config-prt-2-str-all)> set filltype prbs
    SNT(config-prt-2-str-all)> set loadunit PERCENT_LINE_RATE
    SNT(config-prt-2-str-all)> set ipv4.sourceAddr 11.11.11.11
    SNT(config-prt-2-str-all)> set ipv4.destAddr 1.1.1.1
    SNT(config-prt-2-str-all)> set eth.srcmac 00:0E:00:00:00:01
    SNT(config-prt-2-str-all)> set eth.dstmac 00:0D:0D:0D:0D:0D
    SNT(config-prt-2-str-all)> mod add step ipv4.sourceAddr 5000 0.0.0.1
    SNT(config-prt-2-str-all)> mod add step eth.srcMac 5000 1
    SNT(config-prt-2-str-all)> exit
    SNT(config-prt-2)> exit
    SNT(config)> cond add p1top2s1 ${Stream:1:1:1:RxFrameCount} >= $
    {Stream:1:1:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p1top2s2 ${Stream:1:2:1:RxFrameCount} >= $
    {Stream:1:2:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p1top2s3 ${Stream:1:3:1:RxFrameCount} >= $
    {Stream:1:3:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p1top2s4 ${Stream:1:4:1:RxFrameCount} >= $
    {Stream:1:4:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p1top2s5 ${Stream:1:5:1:RxFrameCount} >= $
    {Stream:1:5:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p1Tx ${Port:1:TxTotalFrameCount} >= 10000
    SNT(config)> cond add p2top1s1 ${Stream:2:1:1:RxFrameCount} >= $
    {Stream:2:1:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p2top1s2 ${Stream:2:2:1:RxFrameCount} >= $
    {Stream:2:2:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p2top1s3 ${Stream:2:3:1:RxFrameCount} >= $
    {Stream:2:3:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p2top1s4 ${Stream:2:4:1:RxFrameCount} >= $
    {Stream:2:4:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p2top1s5 ${Stream:2:5:1:RxFrameCount} >= $
    {Stream:2:5:1:TxFrameCount} * 0.99997
    SNT(config)> cond add p2Tx ${Port:2:TxTotalFrameCount} >= 100000
    SNT(config)> end
    SNT> end
    SNT> apply -breakportlocks true
    SNT> SNT> SNT> Port Name Chassis:S:P Tech Media Speed Lnk Streams Load
    LoadUnit
    1+ Port:1 10.79.155.202:3:3 ETH FIBER 1000 UP 5 10.00 %LR
    2+ Port:2 10.79.155.202:3:4 ETH FIBER 1000 UP 5 10.00 %LR

    SNT>
    SNT> clear counter
    SNT> traffic start
    Starting traffic...
    SNT>
    SNT> traffic stop
    Stopping traffic...
    SNT> traffic status
    Traffic STOPPED
    SNT>
    SNT> show result detail p1top2s1
    -----------------------------------------------------------------------------------
    ----------------
    p1top2s1: ${Stream:1:1:1:RxFrameCount} >= ${Stream:1:1:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:1:1:1:RxFrameCount = 6871560
    Stream:1:1:1:TxFrameCount = 6871560

    SNT> show result detail p1top2s2


    -----------------------------------------------------------------------------------
    ----------------
    p1top2s2: ${Stream:1:2:1:RxFrameCount} >= ${Stream:1:2:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:1:2:1:RxFrameCount = 6871560
    Stream:1:2:1:TxFrameCount = 6871560
    SNT> show result detail p1top2s3
    -----------------------------------------------------------------------------------
    ----------------
    p1top2s3: ${Stream:1:3:1:RxFrameCount} >= ${Stream:1:3:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:1:3:1:RxFrameCount = 6871560
    Stream:1:3:1:TxFrameCount = 6871560

    SNT> show result detail p1top2s4


    -----------------------------------------------------------------------------------
    ----------------
    p1top2s4: ${Stream:1:4:1:RxFrameCount} >= ${Stream:1:4:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:1:4:1:RxFrameCount = 6871559
    Stream:1:4:1:TxFrameCount = 6871559

    SNT> show result detail p1top2s5


    -----------------------------------------------------------------------------------
    ----------------
    p1top2s5: ${Stream:1:5:1:RxFrameCount} >= ${Stream:1:5:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:1:5:1:RxFrameCount = 6871559
    Stream:1:5:1:TxFrameCount = 6871559

    SNT> show result detail p1Tx


    -----------------------------------------------------------------------------------
    ----------------
    p1Tx: ${Port:1:TxTotalFrameCount} >= 10000 -> PASSED
    Port:1:TxTotalFrameCount = 34357798

    SNT> show result detail p2top1s1


    -----------------------------------------------------------------------------------
    ----------------
    p2top1s1: ${Stream:2:1:1:RxFrameCount} >= ${Stream:2:1:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:2:1:1:RxFrameCount = 6871770
    Stream:2:1:1:TxFrameCount = 6871772

    SNT> show result detail p2top1s2


    -----------------------------------------------------------------------------------
    ----------------
    p2top1s2: ${Stream:2:2:1:RxFrameCount} >= ${Stream:2:2:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:2:2:1:RxFrameCount = 6871771
    Stream:2:2:1:TxFrameCount = 6871771

    SNT> show result detail p2top1s3


    -----------------------------------------------------------------------------------
    ----------------
    p2top1s3: ${Stream:2:3:1:RxFrameCount} >= ${Stream:2:3:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:2:3:1:RxFrameCount = 6871770
    Stream:2:3:1:TxFrameCount = 6871771

    SNT> show result detail p2top1s4


    -----------------------------------------------------------------------------------
    ----------------
    p2top1s4: ${Stream:2:4:1:RxFrameCount} >= ${Stream:2:4:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:2:4:1:RxFrameCount = 6871770
    Stream:2:4:1:TxFrameCount = 6871771

    SNT> show result detail p2top1s5


    -----------------------------------------------------------------------------------
    ----------------
    p2top1s5: ${Stream:2:5:1:RxFrameCount} >= ${Stream:2:5:1:TxFrameCount} * 0.99997 ->
    PASSED
    Stream:2:5:1:RxFrameCount = 6871771
    Stream:2:5:1:TxFrameCount = 6871771

    SNT> show result detail p2Tx


    -----------------------------------------------------------------------------------
    ----------------
    p2Tx: ${Port:2:TxTotalFrameCount} >= 100000 -> PASSED
    Port:2:TxTotalFrameCount = 34358856

    SNT>
    SNT> clear config
    SNT> show ports
    No valid ports
    SNT>
    SNT> quit
    Cleaning up the Spirent TestCenter module...
    log4cplus:ERROR No appenders could be found for logger (user.scripting).
    log4cplus:ERROR Please initialize the log4cplus system properly.
    [gen-apollo@jpeapp27 snttc_linux4.77]$

    You might also like