Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 133 views

    Frame Upgrade Trident

    Uploaded by

    Nghia Phan
    This document provides instructions for modifying frame extrusions for a Voron 1.8 3D printer to accommodate a larger build volume. It outlines drilling access holes and cutting extrusions to specific lengths, then tapping holes for screws. The document includes diagrams labeling the extrusions to modify and the steps to take for each one. It also lists relevant Voron websites for additional information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Frame Upgrade Trident

    Uploaded by

    Nghia Phan
    133 views9 pages
    This document provides instructions for modifying frame extrusions for a Voron 1.8 3D printer to accommodate a larger build volume. It outlines drilling access holes and cutting extrusions to specific lengths, then tapping holes for screws. The document includes diagrams labeling the extrusions to modify and the steps to take for each one. It also lists relevant Voron websites for additional information.

    Original Title

    Frame_Upgrade_Trident

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for modifying frame extrusions for a Voron 1.8 3D printer to accommodate a larger build volume. It outlines drilling access holes and cutting extrusions to specific lengths, then tapping holes for screws. The document includes diagrams labeling the extrusions to modify and the steps to take for each one. It also lists relevant Voron websites for additional information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    133 views9 pages

    Frame Upgrade Trident

    Uploaded by

    Nghia Phan
    This document provides instructions for modifying frame extrusions for a Voron 1.8 3D printer to accommodate a larger build volume. It outlines drilling access holes and cutting extrusions to specific lengths, then tapping holes for screws. The document includes diagrams labeling the extrusions to modify and the steps to take for each one. It also lists relevant Voron websites for additional information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    WWW.VORONDESIGN.

    COM

    VORON

    VORON 1 TO VORON TRIDENT


    We build space shuttles with gardening tools
    so anyone can have a space shuttle of their own.
    VERSION 2021-08-29
    1
    WWW.VORONDESIGN.COM

    10MM DRILL GUIDE 140MM DRILL GUIDE


    For blind joint access holes For the Y axis blind joint access
    located at the edge of an holes located on the vertical
    extrusion. extrusions.

    2
    WWW.VORONDESIGN.COM

    Bed Rear Extrusion

    Rear Extrusion

    VORON1 1.8 FRAME DISASSEMBLY


    Disassemble your Voron1 1.8. Collect the
    frame pieces highlighted for modification.
    Set aside the remaining extrusions.

    Z Extrusion

    Bed Front Extrusion


    Rear Buttom Extrusion

    3
    WWW.VORONDESIGN.COM

    Z Extrusion

    DRILL ACCESS HOLES DRILL ACCESS HOLES


    Drill an access hole for the Y Drill access holes for the blind
    axis blind joint 140mm from joint 10mm from the right
    the left edge of the extrusion. edge of the extrusion.

    4
    WWW.VORONDESIGN.COM

    Bed Front Extrusion

    DRILL ACCESS HOLES


    Drill an access hole in the
    centre of extrusion.

    5
    WWW.VORONDESIGN.COM

    Rear Buttom Extrusion

    DRILL ACCESS HOLES


    Drill an access hole in the
    centre of extrusion.

    6
    WWW.VORONDESIGN.COM

    Bed Rear Extrusion

    CUT EXTRUSION TAP M5


    The remaining extrusion length is 232mm Tap the end of the extrusion
    for a 250mm spec build. for a M5 screw.

    Mark the extrusion 138mm from the left.


    Cut to the left of your mark.

    7
    WWW.VORONDESIGN.COM

    Rear Extrusion

    CUT EXTRUSION TAP M5


    The remaining extrusion length is 330mm Tap the end of the extrusion
    for all build sizes. for a M5 screw.

    Mark the extrusion 330mm from the right.


    Cut to the left of your mark.

    8
    WWW.VORONDESIGN.COM

    VORON

    Website Github Discord


    www.vorondesign.com https://github.com/vorondesign https://discord.gg/voron

    9 9

    You might also like