Eaj 9002 MG2

Toyo Grease Manufacturing
EAJ 9002 MG2 NON-MELT HIGH TEMP MOLY GREASE Industrial Grade
NON-MELT MOLY-GRAPHITE GREASE
Product Description
This grease is a smooth, grey-black grease. It contain special functional additives and graphite which
impart a long-lasting film on working surfaces. It also resists water washing and has good anti-wear
properties resulting from the solid lubricant effect of the graphite. It features exceptionally low volatility
due to the high molecular-weight olefin polymer base stock.
As the ambient temperature increases, this olefin will evaporate slowly leaving a layer of pure highly-
refined graphite residue on the metallic surfaces thus preventing metal to metal contact.
Product Application
EAJ 9002 MG2 is recommended for all industrial machineries for the lubrication of open gears, shafts,
CV / Plugging / Fixed ball joints, boiler exhaust fan, anti-friction / clutch / plain bearings, chains /
conveyer chains and where loads are heavy or where water may be a problem.
It is also recommended as a track lubricant and for the cup grease lubrication of propeller shaft
bearings in pleasure craft, trawlers etc.
TYPICAL PHYSICAL PROPERTIES

NLGI GRADE 2
WORKED PENETRATION @ 25°C / 77°F, ASTM D-217 265 - 285
APPEARANCE Soft
THICKERNER/ SOAP TYPE Inorganic, Non-Melt
STRUCTURE Smooth
COLOUR Grey - Black
BASE OIL VISCOSITY cSt at 40°C (104°F), ASTM D-445 425
BASE OIL VISCOSITY cSt at 100°C (212°F), ASTM D-445 36

PEAK POINT Above 260°C / 500°F +/- 5
VISCOSITY INDEX, ASTM D-2270 105 - 115
WATER RESISTANT Yes / Excellent
TIMKEN OK LOAD 35 kgs
TEMPERATURE RANGE CAUTION:

Do not ingest! If this should occur, drink large
For continuous service is -20°C to 170°C [ -4°F to 338°F ] volumes of water And seek medical attention.
Always keep container sealed when not in use.
Keep out of reach of children.
With frequent re-lubrication up to 288°C [ 550°F ]
This information is our best knowledge, true & accurate, subjected to change without
prior notice due to continual product research and development. All
recommendations or suggestions are without guarantee since the conditions of use
are beyond our control. The manufacturers do not accept liability for any loss or
damage, however arising, which results directly from the use of such information,
nor do we offer any warranty of immunity against patent infringement.
MACHINES NEVER LIE
Page 1 of 2 A member of National Lubricating Grease Institute (NLGI), USA Toyo Grease Manufacturing (M) Sdn Bhd
All Rights Reserved - © 2010
Toyo Grease Manufacturing
EAJ 9002 MG2 NON-MELT HIGH TEMP MOLY GREASE Industrial Grade
Other Information
Available Product Grade

000, 00, 0, 1, 2, 3 - upon client request
Safety Data Sheet

Safety data sheet can be requested via website www.toyointernational.com or you may also can get them from
your local agent / supplier.
SDS Number: GP09-07
Storage and Handling

This product shall be ideally stored in a cool, dry location in unopened containers. Suggested temperature
between 8°C to 28°C (46°F to 82°F) unless otherwise labeled.
Stirring is recommended in order to prevent ingredients from separating.
Shelf Life
With good practicing on storage, the minimum shelf life from the batch number approx. 3 years or 36 months
Condition of the product must in the original unopened containers.
Available Packing Sizes Part Number # NLGI 2 Packing Type

Cartridge 400 gm 8696G-0509 24 pcs per box
Tub 1 kg 8696G-0510 12 pcs per box
Tub 2 kg 8696G-0511 9 pcs per box
Pail 15 kg 8696G-0116
Drum 180 kg 8696G-0117
This information is our best knowledge, true & accurate, subjected to change without
prior notice due to continual product research and development. All
recommendations or suggestions are without guarantee since the conditions of use
are beyond our control. The manufacturers do not accept liability for any loss or
damage, however arising, which results directly from the use of such information, TOYO GREASE
nor do we offer any warranty of immunity against patent infringement. “MACHINES NEVER LIE”
Page 2 of 2 A member of National Lubricating Grease Institute (NLGI), USA Toyo Grease Manufacturing (M) Sdn Bhd
All Rights Reserved - © 2010

Eaj 9002 MG2

Uploaded by

Copyright:

Available Formats

Eaj 9002 MG2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Eaj 9002 MG2

Uploaded by

Copyright:

Available Formats

Toyo Grease Manufacturing

TYPICAL PHYSICAL PROPERTIES

WORKED PENETRATION @ 25°C / 77°F, ASTM D-217 265 - 285

THICKERNER/ SOAP TYPE Inorganic, Non-Melt

COLOUR Grey - Black

BASE OIL VISCOSITY cSt at 40°C (104°F), ASTM D-445 425

BASE OIL VISCOSITY cSt at 100°C (212°F), ASTM D-445 36

VISCOSITY INDEX, ASTM D-2270 105 - 115

WATER RESISTANT Yes / Excellent

TIMKEN OK LOAD 35 kgs

TEMPERATURE RANGE CAUTION:

Available Product Grade

Safety Data Sheet

Storage and Handling

Available Packing Sizes Part Number # NLGI 2 Packing Type

You might also like