The document provides specifications for Vickers vane pumps, including part numbers for components, diagrams of the pump assembly, and a model code key. It lists specifications and components for different pump models in a double pump configuration, including the rotor, vane kit, inlet/outlet plates, seals, bearings, and housing. The model code key explains the numbering convention for the pump models.
The document provides specifications for Vickers vane pumps, including part numbers for components, diagrams of the pump assembly, and a model code key. It lists specifications and components for different pump models in a double pump configuration, including the rotor, vane kit, inlet/outlet plates, seals, bearings, and housing. The model code key explains the numbering convention for the pump models.
The document provides specifications for Vickers vane pumps, including part numbers for components, diagrams of the pump assembly, and a model code key. It lists specifications and components for different pump models in a double pump configuration, including the rotor, vane kit, inlet/outlet plates, seals, bearings, and housing. The model code key explains the numbering convention for the pump models.
The document provides specifications for Vickers vane pumps, including part numbers for components, diagrams of the pump assembly, and a model code key. It lists specifications and components for different pump models in a double pump configuration, including the rotor, vane kit, inlet/outlet plates, seals, bearings, and housing. The model code key explains the numbering convention for the pump models.
289473 Screw (2 Req'd) 38523 Bolt (4 Req'd) Torque 88.1 - 101.7 N.m. (65 - 75 lb. ft. ) 584382 Outlet Plate 419672 Seal Ring 154026 O"RIng 588506 Ring 154090 O"RIng Cover (See Table)
1296 Bolt (4 Req'd)
Torque 55.2 - 67.8 N.m. (40 - 50 lb. ft. ) Included in shaft end cartridge kit Included in cover end cartridge kit Included in seal kit 922856 F3 equivalent seal kit 919303 Included in foot bracket kit FB-B-10 Assemble seal with spring loaded sealing member towards bearing. Seals to be completely wetted with oil prior to assembly. Install 419673 sealing ring into body, then install cartridge kit. Shaft End Shaft End MODEL RING CART KIT F3 CART KIT 2520V12 584610 02-102532 02-102540 2520V14 584612 02-102533 02-102541 2520V17 584614 02-102534 02-102542 2520V21 584616 02-102535 02-102543
Body S/A (See Table)
Key (See Table) Shaft (See Table)
199491 Foot Bracket
199740 Screw (2 Req'd)
394976 Shaft Seal
190362 Retainer 1705 Bearing 120128 Retaining Ring 191400 Retaining Ring 588507 Ring 154078 O" Ring
NOTE: For satisfactory service life of these components in industrial applications, use full flow filtration to provide fluid which meets ISO cleanliness code 16/13 or cleaner. OFP, OFR, and OFRS series filters are recommended. Model Code
1 2 3 4 5 6 7 8 9 10 11 12
1 Special seals 6 Port connection modifier 10 Port orientation
M - Metric port connection (Viewed from cover end of pump) 2 Series designation (4 bolt flange) With no. 1 outlet opposite inlet Omit - Inch thread port connection Displacements cm3/r (in3/r) (4 bolt flange) AA - No. 2 outlet 135 CCW from inlet AB - No. 2 outlet 45 CCW from inlet Model Shaft end Cover end AC - No. 2 outlet 45 CW from inlet 2520V 40 - 67 18 - 45 7 Geometric displacement AD - No. 2 outlet 135 CW from inlet (2.47-4.13) (1.1 - 2.22) Cover end pump With no. 1 outlet 90 CCW from inlet (Rated capacity (USgpm) at 1200 rpm, 6.9 bar (100 psi) BA - No. 2 outlet 135 CCW from inlet 3 Pilot designation BB - No. 2 outlet 45 CCW from inlet M - Metric per ISO 3019/2 100A2HW Frame Code cm3/r in3/r BC - No. 2 outlet 45 CW from inlet Omit - Standard pilot size BD - No. 2 outlet 135 CW from inlet 2520V 2 6.5 0.40 With no. 1 outlet inline with inlet 4 Geometric displacement 5 18 1.10 CA - No. 2 outlet 135 CCW from inlet Shaft end pump 8 27 1.67 CB - No. 2 outlet 45 CCW from inlet 11 36 2.22 (Rated capacity (USgpm) at CC - No. 2 outlet 45 CW from inlet 12 40 2.47 CD - No. 2 outlet 135 CW from inlet 1200 rpm, 6.9 bar (100 psi) 14 45 2.78 Frame With no. 1 outlet 90 CW from inlet Code cm3/r in3/r size DA - No. 2 outlet 135 CCW from inlet 8 Mounting 2520V 12 40 2.47 DB - No. 2 outlet 45 CCW from inlet 14 45 2.78 F - Foot mounting DC - No. 2 outlet 45 CW from inlet Omit - Flange mounting DD - No. 2 outlet 135 CW from inlet 17 55 3.39 21 67 4.13 9 Shaft 11 Design 5 Port connections 1 - Straight keyed 11 - Splined 12 Rotation A - SAE 4 bolt flange 86 - Heavy duty straight keyed 192N - Straight keyed (M pilot only) (Viewed from shaft end of pump) L - Left hand for counterclockwise R - Right hand for clockwise
Sharp Edges of Vane Must Lead in Direction of Rotation
NOTE To reverse cartridge kit rotation, remove the two screws and reverse the location of LH RH LH the inlet support plate and the outlet supĆ RH port plate. Reinstall the two screws hand tight. Use pump cover to align all sections of the cartridge. Carefully remove the covĆ RH LH er and tighten the screws. RH LH
When ordering spare cartridge parts, it is
recommended they be obtained in carĆ Cover End Cartridge Shaft End Cartridge tridge kits. Kits are assembled and tested R. H. Rotation R. H. Rotation for either right or left hand rotation. If left hand rotation is required, it should be speĆ NOTE cified on parts order by adding suffix "L" to Standard right hand shaft rotation cartridges shown. cartridge kit number. Reverse for left hand rotation.
