Vincotech

Power Modules Catalog

2011/12

Downloaded from Arrow.com.

 2

Downloaded from Arrow.com.

 Content

Introduction 4
Applications 5
Overview Topology/Housing 6-7
Overview Topology/Application 8-9

PIM 10 - 16
PIM with PFC 17
IPM 18
Sixpack 18 - 22
Half-Bridge 23 - 24
H-Bridge 25 - 26
Rectifier 26 - 27
PFC 27 - 28
Solar Topologies 28 - 29
Booster 29 - 31
NPC 31 - 32
MNPC 33 - 34

Housing Dimensions 35 - 42
MiniSKiiP® Options 43
Phase Change Material 44
Press-fit Technology 45
Description – Naming System 46
Simulation Software (ISE) 47

Downloaded from Arrow.com.

 Introduction

Vincotech develops and manufactures power modules and

offers manufacturing services geared to help customers to master

complex challenges in power electronics integration.

Vincotech is one of the market leaders in power modules.

Target applications include motor drives, solar inverters, welding

equipment, and power supplies.

With 16 different standard housings and more than 40 standard

product families, Vincotech offers a wide power range using

different topologies.

Products include Power Integrated Modules (PIM – a combination

of input rectifier, inverter, and brake chopper) as well as sixpack

inverters, rectifier, boosters, NPC converters, and PFC-, H- and

half-bridge modules. Vincotech covers a broad power spectrum

ranging from 5A to 450A at 600V and 1200V.

Downloaded from Arrow.com.

 Vincotech power modules serve a wide and diverse range
Applications of applications, the most common of which are described below.
The icons shown alongside each description indicate the
applications for which the module is suited.

Industrial Drives
Standard drive applications for industrial use with power ranges
from 1kW to 60kW. Topologies are Power Integrated Modules
(PIM – rectifier, inverter, and brake), sixpacks (three-phase
inverters), half-bridge and rectifier modules.

Embedded Drives
Integrated drive applications for industrial and home appliances.
Typically used in fans, air conditioning, pumps, power tools,
washing machines, and refrigerators. Solutions are Intelligent Power
Modules (IPM), Power Integrated Modules with embedded Power
Factor Correction (PFC) circuit, and rectifier modules with PFC.

Solar Inverters
Inverter applications for solar power systems. Transformerless and
transformer-based inverters with single- and three-phase outputs.
Special topologies such as asymmetric H-bridge, Neutral Point
Clamped (NPC) inverters, and parallel and symmetric boosts for
high efficiency. For systems with overall power up to 200kW.

Uninterruptable Power Supplies (UPS)

Power components for UPS applications. Modules for AC/DC
and DC/AC power conversion. Topologies such as single- and
three-phase rectifiers, half- and H-bridges, boosters, and NPCs.
Power ranges up to 200kW.

Welding
Solutions for industrial welding applications, fast-switching half- and
H-bridges, PFC and rectifier topologies. Special modules for zero-
switching (ZVS) applications, with improved thermal resistance
(Rth), or internal DC link capacitors for lower turn-off losses.

Power Supplies
Power components typically used in power supply applications.
Modules with topologies such as rectifiers, PFC switches (single,
dual, and interleaved), boost circuits (step-up and step-down),
half-bridges, and H-bridges.

Downloaded from Arrow.com.

 flow 0 flow 1 flow 1B flow 2 flow90 1
Overview
Topology/Housing

PIM flowPIM® 0 flowPIM® 1 (Page 11) flowIPM 1B flowPIM® 2 flow90PIM 1

(Page 10) flowPIM® 1 + PFC (Page 18) (Page 12) (Page 13)
flowPIM® 0 + PFC (Page 17)
(Page 17) fastPIM 1 H
* (Page 26)

Sixpack flowPACK 0 flowPACK 1 flowPACK 2 flow90PACK 1

(Page 18) (Page 19) (Page 19) (Page 20)

Half-Bridge flowPHASE 0
(Page 23)

H-Bridge fastPACK 0 H
(Page 25)

Rectifier flowCON 0 flow90CON 1

(Page 26) (Page 27)

PFC flowPFC 0
(Page 27-28)

Solar flowSOL 0
(Page 28-29)
Topologies

Booster flowBOOST 0 flowBOOST 2

(Page 29-31) (Page 30)

NPC flowNPC 0 flowNPC 1 flowNPC 2

(Page 31) (Page 32) (Page 32)

MNPC flowMNPC 0 flowMNPC 1

(Page 33) (Page 33)

* = Example *

Downloaded from Arrow.com.

 flowSCREW 2 flowSCREW 3 flowSCREW MiniSKiiP® 0 MiniSKiiP® 1 MiniSKiiP® 2 MiniSKiiP® 3
4W

MiniSKiiP® 0 PIM MiniSKiiP® 1 PIM MiniSKiiP® 2 PIM MiniSKiiP® 3 PIM

(Page 13) (Page 14) (Page 15) (Page 16)

MiniSKiiP® 1 PACK MiniSKiiP® 2 PACK MiniSKiiP® 3 PACK

(Page 20-21) (Page 21-22) (Page 22)

flowPHASE 2 flowPHASE 3
(Page 23-24) (Page 24)

flowMNPC 4W
(Page 34)

Downloaded from Arrow.com.

 Industrial Embedded
Overview Drives Drives

Topology/Application

PIM flowPIM® (Page 10-13) flowPIM® (Page 10-13)

MiniSKiiP® PIM (Page 13-16)

PIM + PFC flowPIM® + PFC (Page 17)

flowIPM® 1B (Page 18)

Sixpack flowPACK (Page 18-20)

MiniSKiiP® PACK (Page 20-22)

Half-Bridge flowPHASE (Page 23-24)

H-Bridge

Rectifier flowCON (Page 26-27)

PFC flowPFC (Page 27-28)

Solar
Topologies

Booster

NPC flowNPC (Page 31-32)

MNPC flowMNPC (Page 33-34)

* = Example *

Downloaded from Arrow.com.

 Solar UPS Welding Power
Inverter Supplies

fastPIM 1 (Page 26) fastPIM 1 H (Page 26)

flowPHASE (Page 23-24) flowPHASE (Page 23-24) flowPHASE (Page 23-24) flowPHASE (Page 23-24)

fastPACK H (Page 25) fastPACK H (Page 25) fastPACK H (Page 25) fastPACK H (Page 25)

flowCON (Page 26-27) flowCON (Page 26-27) flowCON (Page 26-27)

flowPFC (Page 27-28) flowPFC (Page 27-28)

flowSOL (Page 28-29)

flowBOOST (Page 29-31) flowBOOST (Page 29-31) flowBOOST (Page 29-31)

flowNPC (Page 31-32) flowNPC (Page 31-32)

flowMNPC (Page 33-34) flowMNPC (Page 33-34)

Downloaded from Arrow.com.

 PIM
flowPIM® 0 3rd gen

W Trench Fieldstop
Technology IGBT4
W Low saturation losses
W Improved EMC behavior
W Optionally with
enhanced rectifier
and w/o brake

Housing
W flow 0 17mm 2-clip
W flow 0 12mm 2-clip

Part-No Voltage Current1) Options*

V23990-P848-*-PM 1200V 4A A48: Std. rect., 12mm
V23990-P849-*-PM 1200V 8A C48: Std. rect., 12mm, w/o brake
A49: Std. rect., 17mm
V23990-P840-*-PM 1200V 15A C49: Std. rect., 17mm, w/o brake
A58: Enh. rect., 12mm
C58: Enh. rect., 12mm, w/o brake
A59: Enh. rect., 17mm
C59: Enh. rect., 17mm, w/o brake

flowPIM® 0 2nd gen

W IGBT3 technology
for low saturation losses
W Optionally with
enhanced rectifier and
w/o brake

Housing
W flow 0 17mm 4-clip
W flow 0 17mm 2-clip
W flow 0 12mm 2-clip

Part-No Voltage Current1) Options*

V23990-P541-*-PM 600V 6A
A20: Std. rect., 17mm 4-clip
V23990-P543-*-PM 600V 10A
A21: Enh. rect., 17mm 4-clip C21: enh. rect., 17mm 4-clip, w/o brake
V23990-P544-*-PM 600V 15A A28: Std. rect., 12mm 2-clip
A38: Enh. rect., 12mm 2-clip C38: enh. rect., 12mm 2-clip, w/o brake
V23990-P545-*-PM 600V 20A
A39: Enh. rect., 17mm 2-clip C39: enh. rect., 17mm 2-clip, w/o brake
V23990-P546-*-PM 600V 30A
V23990-P549-*-PM 1200V 8A A: Std. rect., 17mm 4-clip
A01: Enh. rect., 17mm 4-clip
V23990-P540-*-PM 1200V 15A C01: Enh. rect., 17mm 4clip, w/o brake

1) Rated current of components

10

Downloaded from Arrow.com.

 flowPIM® 1 3rd gen

W Trench Fieldstop
Technology IGBT4
W Low saturation losses
W Optionally with
enhanced rectifier
and w/o brake

Housing
W flow 1 17mm
W flow 1 12mm

Part-No Voltage Current1) Options*

V23990-P588-*41-PM 1200V 15A A41: 17mm, with brake
A418: 12mm, with brake
V23990-P589-*41-PM 1200V 25A C41: 17mm, w/o brake
V23990-P580-*41-PM 1200V 35A C418: 12mm, w/o brake

V23990-P580-A46-PM 1200V 35A With brake, improved Rth (AlN)

V23990-P589-A31-PM 1200V 25A With IGBT Phantom Speed (fsw > 8kHz)

flowPIM® 1 2nd gen

W IGBT3 technology
for low saturation losses
W Compact design with
enhanced recitifier
W Optionally with or
w/o brake

Housing
W flow 1 17mm
W flow 1 12mm

Part-No Voltage Current1) Options*

V23990-P585-*-PM 600V 30A A20: 17mm, with brake
A208: 12mm, with brake
V23990-P586-*-PM 600V 50A C20: 17mm, w/o brake
V23990-P587-*-PM 600V 75A C208: 12mm, w/o brake

V23990-P588-*-PM 1200V 15A

A: With brake
V23990-P589-*-PM 1200V 25A C: W/o brake
V23990-P580-*-PM 1200V 35A

11

Downloaded from Arrow.com.

 PIM
flowPIM® 2 3rd gen

W IGBT4 (1200V)
technology for low
saturation losses and
improved EMC behavior
W IGBT3 (600V) technology
for low saturation losses
W Compact and low
Part-No Voltage Current1) Comments
inductive design
V23990-P763-A-PM 600V 50A
V23990-P764-A-PM 600V 75A IGBT3
Housing
V23990-P765-A-PM 600V 100A
W flow 2
V23990-P767-A-PM 1200V 35A
V23990-P768-A-PM 1200V 50A
IGBT4
V23990-P769-A-PM 1200V 75A
V23990-P760-A-PM 1200V 100A

flowPIM® 1 Enhanced

W Ultra fast IGBTs for

reduced switching
losses dedicated for
fsw > 8kHz
W Typical applications:
fans and pumps
Part-No Voltage Current1) Comments
Housing V23990-P516-C-PM 1200V 8A
W flow 1 17mm V23990-P517-C-PM 1200V 15A
V23990-P518-C44-PM 1200V 25A IGBT phantom speed

1) Rated current of components

12

Downloaded from Arrow.com.

 flow90PIM 1

W IGBT3 technology for

low saturation losses
W Supports designs with
90° mounting angle
between heatsink and
PCB
W Clip-in PCB mounting
Part-No Voltage Current1) Comments
W Clip or screw-on
heatsink mounting V23990-P631-A-PM 600V 8A
V23990-P632-A-PM 600V 10A
V23990-P633-A-PM 600V 15A
Housing
V23990-P634-A-PM 600V 20A IGBT3
W flow90 1
V23990-P635-A-PM 600V 30A
V23990-P639-A-PM 1200V 8A
V23990-P630-A-PM 1200V 15A

MiniSKiiP® 0 PIM

W Solderless spring contact

mounting system
W IGBT4 (1200V)
technology for low
saturation losses and
improved EMC behavior
W IGBT3 (600V) Part-No Voltage Current1) Comments
technology for low 80-M006PNB006SA-K614C 600V 6A 3-leg rectifier, equivalent SKiiP 01NAC066V3
saturation losses 80-M006PNB006SA01-K614D 600V 6A 2-leg rectifier, equivalent SKiiP 01NEC066V3
W Optional with 2-leg 80-M006PNB010SA-K615C 600V 10A 3-leg rectifier, equivalent SKiiP 02NAC066V3
rectifier (600V) 80-M006PNB010SA01-K615D 600V 10A 2-leg rectifier, equivalent SKiiP 02NEC066V3
80-M012PNB008SC-K619C41 1200V 8A 3-leg rectifier, equivalent SKiiP 03NAC12T4V1
Housing
W MiniSKiiP® 0

13

Downloaded from Arrow.com.

 PIM
MiniSKiiP® 1 PIM
IGBT4

W Trench Fieldstop IGBT4

technology
W Solderless spring contact
mounting system

Housing Part-No Voltage Current1) Comments

W MiniSKiiP® 1
V23990-K209-A40-PM 1200V 8A Equivalent: SKiiP 11NAB12T4V1
V23990-K200-A40-PM 1200V 15A Equivalent: SKiiP 12NAB12T4V1

MiniSKiiP® 1 PIM

W Trench Fieldstop IGBT3

for low saturation losses
W Solderless spring contact
mounting system

Housing
W MiniSKiiP® 1 Part-No Voltage Current1) Comments
V23990-K201-A-PM 600V 6A Equivalent: SKiiP 11 NAB 066 V1
V23990-K202-A-PM 600V 10A Equivalent: SKiiP 12 NAB 066 V1
V23990-K203-A-PM 600V 15A Equivalent: SKiiP 13 NAB 066 V1
V23990-K204-A10-PM 600V 20A Equivalent: SKiiP 14 NAB 066 V1
V23990-K209-A-PM 1200V 8A Equivalent: SKiiP 11 NAB 126 V1
V23990-K200-A-PM 1200V 15A Equivalent: SKiiP 12 NAB 126 V1
V23990-K200-A10-PM 1200V 15A With high speed FRED

1) Rated current of components

14

Downloaded from Arrow.com.

 MiniSKiiP® 2 PIM
IGBT4

W Trench Fieldstop IGBT4

technology
W Solderless spring contact
mounting system

Housing Part-No Voltage Current1) Comments

W MiniSKiiP® 2
V23990-K229-A40-PM 1200V 25A Equivalent: SKiiP 23NAB12T4V1
V23990-K220-A40-PM 1200V 35A Equivalent: SKiiP 24NAB12T4V1

MiniSKiiP® 2 PIM

W Trench Fieldstop IGBT3

for low saturation losses
W Solderless spring contact
mounting system

Housing
W MiniSKiiP® 2 Part-No Voltage Current1) Comments
V23990-K222-A-PM 600V 30A Equivalent: SKiiP 25 NAB 066 V1
V23990-K223-A-PM 600V 50A Equivalent: SKiiP 26 NAB 066 V1
V23990-K229-A-PM 1200V 25 A Equivalent: SKiiP 23 NAB 126 V1
V23990-K229-A10-PM 1200V 25A With high speed FRED
V23990-K220-A-PM 1200V 35A Equivalent: SKiiP 24 NAB 126 V1

15

Downloaded from Arrow.com.

 PIM
MiniSKiiP® 3 PIM
IGBT4

W Trench Fieldstop IGBT4

technology
W Solderless spring contact
mounting system

Housing Part-No Voltage Current1) Comments

W MiniSKiiP® 3 V23990-K428-A40-PM 1200V 50A Equivalent: SKiiP 35NAB12T4V1
V23990-K429-A40-PM 1200V 75A Equivalent: SKiiP 37NAB12T4V1
V23990-K420-A40-PM 1200V 100A Equivalent: SKiiP 38NAB12T4V1

MiniSKiiP® 3 PIM

W Trench Fieldstop IGBT3

for low saturation losses
W Solderless spring contact
mounting system

Housing
W MiniSKiiP® 3 Part-No Voltage Current1) Comments
V23990-K242-A-PM 600V 75A Equivalent: SKiiP 37 NAB 066 V1
V23990-K243-A-PM 600V 100A Equivalent: SKiiP 38 NAB 066 V1
V23990-K249-A-PM 1200V 50A Equivalent: SKiiP 35 NAB 126 V1
V23990-K240-A-PM 1200V 70A Equivalent: SKiiP 38 NAB 126 V1

1) Rated current of components

16

Downloaded from Arrow.com.

 PIM with PFC
flowPIM® 0 + PFC

W PIM module with

CoolMOS PFC inverter
W PFC switching frequency
up to 200kHz
W Inverter part with IGBT3
technology
W Clip-in PCB mounting

Housing
W flow 0 17mm 4-clip
W flow 0 17mm 2-clip
Part-No Voltage Current1) Options*
V23990-P371-B10-PM 600V 4A
V23990-P372-B10-PM 600V 6A
V23990-P373-*-PM 600V 10A B10: 4-clip housing
B17: 4-clip housing, w/o PFC shunt
B19: 2-clip housing

flowPIM® 1 + PFC

W PFC switching frequency

up to 200kHz
W Inverter part with IGBT2
technology
W With inverter high side
shunt for short circuit
detection Part-No Voltage Current1) Options
V23990-P303-B-PM 600V 10A
Housing V23990-P304-B-PM 600V 15A
W flow 1 17mm V23990-P305-B-PM 600V 20A

17

Downloaded from Arrow.com.

 IPM
flowIPM 1B

W Rectifier, PFC,
three-phase inverter
W Integrated DC capacitor
W Current sensing with
laser trimmed shunts
W Complete gate drive
circuit (incl. bootstrap)
W Temperature sensor Part-No Voltage Current1) Options
20-1B06IPA004MF-P953A 600V 4A
Housing 20-1B06IPA004MC-P953A10 600V 4A SiC PFC diode
W flow 1B 20-1B06IPA010MF-P955A 600V 10A
20-1B06IPA010Mx-P955A10 600V 10A SiC PFC diode

SIXPACK
flowPACK 0 3rd gen

W Trench Fieldstop
Technology IGBT3
(600V)
W Trench Fieldstop
Technology IGBT4
(1200V)
W Low saturation losses
and improved EMC
behavior

Housing Part-No Voltage Current1) Options*

W flow 0 17mm 2-clip
V23990-P861-*-PM 600V 10A
W flow 0 12mm 2-clip
V23990-P862-*-PM 600V 15A
V23990-P863-*-PM 600V 20A
V23990-P864-*-PM 600V 30A
V23990-P865-*-PM 600V 50A F48 = 12mm flow0 2-clip housing
V23990-P866-*-PM 600V 75A F49 = 17mm flow0 2-clip housing
V23990-P867-*-PM 1200V 8A
V23990-P868-*-PM 1200V 15A
V23990-P869-*-PM 1200V 25A
V23990-P860-*-PM 1200V 35A

1) Rated current of components

18

Downloaded from Arrow.com.

 flowPACK 1

W Trench Fieldstop
Technology IGBT3
(600V)
W Trench Fieldstop
Technology IGBT4
(1200V)
W Low saturation losses Part-No Voltage Current1) Options*
and improved EMC V23990-P823-*-PM 600V 50A
behavior V23990-P824-*-PM 600V 75A
W Compact design V23990-P825-*-PM 600V 100A F: Improved Rth (AlN DCB)
F10: Std. version
V23990-P828-*-PM 1200V 35A
Housing V23990-P829-*-PM 1200V 50A
W flow 1 17mm

flowPACK 2

W Trench Fieldstop
Technology IGBT4
W Low saturation losses
W Improved EMC behavior
W Compact and low
inductive design

Housing Part-No Voltage Current1) Options

W flow 2 V23990-P688-F-PM 1200V 75A
V23990-P689-F-PM 1200V 100A
V23990-P680-F-PM 1200V 150A

19

Downloaded from Arrow.com.

 SIXPACK
flow90PACK 1

W Trench Fieldstop
Technology IGBT3 for
low saturation losses
W Supports designs with 90°
mounting angle between
heatsink and PCB
W Clip-in PCB mounting Part-No Voltage Current1) Options
V23990-P704-F-PM 600V 30A
Housing V23990-P705-F-PM 600V 50A
W flow90 1 V23990-P706-F-PM 600V 75A
V23990-P708-F-PM 1200V 15A
V23990-P709-F-PM 1200V 25A
V23990-P700-F-PM 1200V 35A

MiniSKiiP® 1 PACK
IGBT4

W Trench Fieldstop IGBT4

Technology
W Solderless spring contact
mounting system

Housing Part-No Voltage Current1) Comments

W MiniSKiiP® 1 V23990-K218-F40-PM 1200V 8A Equivalent: SKiiP 11 AC 12T4 V1
V23990-K219-F40-PM 1200V 15A Equivalent: SKiiP 12 AC 12T4 V1
V23990-K210-F40-PM 1200V 25A Equivalent: SKiiP 13 AC 12T4 V1

1) Rated current of components

20

Downloaded from Arrow.com.

 MiniSKiiP® 1 PACK

W Trench Fieldstop IGBTs

for low saturation voltage
W Solderless spring contact
mounting system

Housing
W MiniSKiiP® 1 Part-No Voltage Current1) Comments
V23990-K218-F-PM 1200V 8A Equivalent: SKiiP 11 AC 126 V1
V23990-K219-F-PM 1200V 15A Equivalent: SKiiP 12 AC 126 V1
V23990-K210-F-PM 1200V 25A Equivalent: SKiiP 13 AC 126 V1

MiniSKiiP® 2 PACK
IGBT4

W Trench Fieldstop IGBT4

Technology
W Solderless spring contact
mounting system

Housing Part-No Voltage Current1) Comments

W MiniSKiiP® 2 V23990-K238-F40-PM 1200V 35A Equivalent: SKiiP 24 AC 12T4 V1
V23990-K239-F40-PM 1200V 50A Equivalent: SKiiP 25 AC 12T4 V1
V23990-K230-F40-PM 1200V 70A Equivalent: SKiiP 26 AC 12T4 V1

21

Downloaded from Arrow.com.

 SIXPACK
MiniSKiiP® 2 PACK

W Trench Fieldstop IGBTs

for low saturation losses
W Solderless spring contact
mounting system

Housing
W MiniSKiiP® 2 Part-No Voltage Current1) Comments
V23990-K232-F-PM 600V 50A Equivalent: SKiiP 26 AC 066V1
V23990-K233-F-PM 600V 75A Equivalent: SKiiP 27 AC 066V1
V23990-K305-F-PM 600V 100A Equivalent: SKiiP 28 AC 066V1
V23990-K238-F-PM 1200V 35A Equivalent: SKiiP 24 AC 126V1
V23990-K239-F-PM 1200V 50A Equivalent: SKiiP 25 AC 126V1
V23990-K230-F-PM 1200V 70A Equivalent: SKiiP 26 AC 126V1

MiniSKiiP® 3 PACK
IGBT4

W Trench Fieldstop IGBT4

Technology
W Solderless spring contact
mounting system

Housing
WMiniSKiiP® 3
Part-No Voltage Current1) Comments
V23990-K438-F40-PM 1200V 70A Equivalent: SKIIP 37 AC 12 T4V1
V23990-K439-F40-PM 1200V 100A Equivalent: SKIIP 38 AC 12 T4V1
V23990-K430-F40-PM 1200V 150A Equivalent: SKIIP 39 AC 12 T4V1

1) Rated current of components

22

Downloaded from Arrow.com.

 HALF-BRIDGE
flowPHASE 0 2nd gen

W Trench Fieldstop
Technology IGBT3
(600V)
W Trench Fieldstop
Technology IGBT4
(1200V)
W Low saturation losses
and improved EMC
behavior
W Clip-in PCB mounting
W Available with
Part-No Voltage Current1) Comments Options
Press-fit pins
1
10-Fx 062PA075SAx²-P993Fx³ 600V 75A
Housing 10-Fx1062PA100SAx²-P994Fx³ 600V 100A
IGBT3
10-Fx1062PA150SAx²-P995Fx³ 600V 150A
W flow 0 17mm 2-clip 1Z:
10-Fx1062PA200SAx²-P996Fx³ 600V 200A 12mm 2-clip housing
W flow 0 12mm 2-clip 10: 17mm 2-clip housing
10-Fx1122PA050SCx²-P997Fx³ 1200V 50A 201: Improved Rth (AlN)
3: Different options
10-Fx1122PA075SCx²-P998Fx³ 1200V 75A
IGBT4, fsw < 8kHz
10-Fx1122PA100SCx²-P999Fx³ 1200V 100A
10-Fx1122PA150SCx²-P990Fx³ 1200V 150A
10-Fx1122PA100FEx²-P999Fx³ 1200V 100A IGBT2 phantom, fsw < 25kHz

10-Fx1122PA100FCx²-P999Fx³ 1200V 100A IGBT2 fast, fsw < 50kHz

flowPHASE 2 1st gen

W Trench Fieldstop
Technology IGBT3
W Low saturation losses
and improved EMC
behavior
W Reliable solder and
screw contacts

Housing Part-No Voltage Current1) Options

W flowSCREW 2 V23990-P610-F02-PM 1200V 300A

23

Downloaded from Arrow.com.

 HALF-BRIDGE
flowPHASE 2 Low Ind

W Trench Fieldstop
Technology IGBT3
(600V)
W Trench Fieldstop
Technology IGBT4
(1200V)
W Low saturation losses
and improved EMC
Part-No Voltage Current1) Comments
behavior
70-S2062PA300SA-P815F 600V 300A 30kW / 20kHz, IGBT3
W Low resistive high
70-S2062PA400SA-P816F 600V 400A 40kW / 20kHz, IGBT3
current path
70-S2122PA200FE-P818F20 1200V 200A 40kW / 20kHz, IGBT2 phantom
W Low inductive transient 70-S2122PA200SC-P818F 1200V 200A 40kW / 8kHz, IGBT4
current path 70-S2122PA300SC-P819F 1200V 300A 60kW / 8kHz, IGBT4
W Reliable solder and
screw contacts

Housing
W flowSCREW 2

flowPHASE 3

W Trench Fieldstop
Technology IGBT3
W Low saturation losses
and improved EMC
behavior
W Reliable solder and screw
contacts

Housing Part-No Voltage Current1) Options

W flowSCREW 3
V23990-P669-F02-PM 1200V 300A
V23990-P660-F02-PM 1200V 450A

1) Rated current of components

24

Downloaded from Arrow.com.

 H-BRIDGE
fastPACK 0 H

W Ultra low inductive

design
W Ultra high switching
frequency
W Clip-in PCB mounting P622 + P628 P623 + P629
W Available with
Press-fit pins
Part-No Voltage Current1) Comments

Housing V23990-P622-F64-PM 600V 30A CoolMOS, fsw < 400kHz

V23990-P622-F74-PM 600V 30A CoolMOS, fsw < 400kHz, improved Rth (AlN)
W flow 0 17mm 4-clip
V23990-P623-F04-PM 600V 60A IGBT2 fast, fsw < 100kHz
W flow 0 12mm 2-clip
V23990-P623-F14-PM 600V 60A IGBT2 fast, fsw < 100kHz, improved Rth (AlN)

V23990-P623-F24-PM 600V 50A

V23990-P624-F24-PM 600V 75A IGBT3, fsw < 30kHz

V23990-P625-F24-PM 600V 100A

V23990-P628-F64-PM 900V 26A CoolMos C3 120 mOhm, fsw < 250 kHz, H-bridge

V23990-P629-F44-PM 1200V 25A IGBT2 phantom, fsw < 50kHz

V23990-P629-F46-PM 1200V 25A IGBT2 phantom, fsw < 50kHz, hyper fast diodes

V23990-P629-F54-PM 1200V 25A IGBT2 phantom, fsw < 50kHz, improved Rth (AlN)

V23990-P629-F56-PM 1200V 25A IGBT2 phantom, fsw < 50kHz, improved Rth (AlN), hyper fast diodes

fastPACK 0 H
with capacitors

W Ultra low inductive

design
W Integrated capacitor
W Ultra high switching
frequency
W Clip-in PCB mounting
W Available with P722 P723 + P729
Press-fit pins

Housing
W flow 0 17mm 4-clip
Part-No Voltage Current1) Comments
W flow 0 12mm 2-clip
V23990-P722-F64-PM 600V 30A CoolMOS CFD 83mOhm with fast body diode, fsw < 400kHz

V23990-P722-F74-PM 600V 30A CoolMOS CFD 83mOhm with fast body diode, fsw < 400kHz,
improved Rth (AlN)
V23990-P723-F04-PM 600V 60A IGBT2 fast, fsw < 100kHz

V23990-P723-F14-PM 600V 60A IGBT2 fast, fsw < 100kHz, improved Rth (AlN)

V23990-P729-F44-PM 1200V 25A IGBT2 phantom, fsw < 50kHz

V23990-P729-F46-PM 1200V 25A IGBT2 phantom, fsw < 50kHz, hyper fast diodes

V23990-P729-F54-PM 1200V 25A IGBT2 phantom, fsw < 50kHz, improved Rth (AlN)

V23990-P729-F56-PM 1200V 25A IGBT2 phantom, fsw < 50kHz, improved Rth (AlN), hyper fast diodes

25

Downloaded from Arrow.com.

 H-BRIDGE
fastPIM 1 H

W Ultra high switching

frequency
W Ultra low inductive design

Housing
W flow 1 17mm

Part-No Voltage Current1) Comments

V23990-P381-A-PM 600V 12A
V23990-P382-A-PM 600V 20A
V23990-P385-A11-PM 600V 20A Improved Rth (AlN)
V23990-P380-A-PM 600V 30A
V23990-P386-A11-PM 600V 30A Improved Rth (AlN)
V23990-P387-A11-PM 600V 40A Improved Rth (AlN)

RECTIFIER
flowCON 0

W Modular input rectifier

W Optionally half controlled
W Compatible
with flowPHASE and
flowPACK P64x P590 P600
W Combines P590 and
P600 to a three-phase
rectifier Part-No Voltage Current1) Options*
V23990-P649-*-PM 1600V 50A G: Standard rectifier, with brake
G10: Half controlled rectifier, with brake
Housing V23990-P640-*-PM 1600V 75A H: Standard rectifier, w/o brake
H10: Half controlled rectifier, w/o brake
W flow 0 17mm 4-clip
V23990-P590-J09-PM 1600V 105A Standard rectifier

V23990-P590-J19-PM 1600V 78A Half controlled rectifier

V23990-P600-I09-PM 1600V 105A Standard rectifier

V23990-P600-I19-PM 1600V 78A Half controlled rectifier

1) Rated current of components

26

Downloaded from Arrow.com.

 flow90CON 1

W Input rectifier optionally

half controlled
W Compatible with
flow90PACK 1
W Clip-in PCB mounting
W Clip or screw-on
Part-No Voltage Current1) Options*
heatsink mounting
V23990-P717-G*-PM 1600V 35A G: Standard rectifier, with brake
G10: Enhanced rectifier, with brake
V23990-P718-G*-PM 1600V 50A
Housing H:
H10:
Standard rectifier, w/o brake
Enhanced rectifier, w/o brake
V23990-P719-G*-PM 1600V 75A
W flow90 1

PFC
flowPFC 0 1st gen

W High power, high

efficiency PFC circuit
W Optionally half controlled
W Up to 400kHz switching
frequency
W Integrated high frequency
capacitors
Part-No Voltage Current1) Comments Options*
Housing V23990-P802-D*0-PM 500V 15A CooIMOS™ + tandem diode
W flow 0 17mm 4-clip V23990-P803-D*0-PM 500V 28A CooIMOS™ + tandem diode 3: Standard rectifier
4: Half controlled
V23990-P804-D*1-PM 600V 30A High speed IGBT + tandem diode rectifier
V23990-P800-D*0-PM 600V 34A CooIMOS™ + SiC diode
V23990-P804-D30-PM 600V 36A High speed IGBT + tandem diode,
enhanced rectifier

27

Downloaded from Arrow.com.

 PFC
flowPFC 0 2nd gen

W Compact and low

inductance design
W Suitable for interleaved
topology
W Suitable for current
sensing in collector
or in emitter
W PFC for welding, Part-No Voltage Current1) Comments Options
SMPS, motor drives, 10-F0062TA099FH02-P980D49 600V 20A CooIMOS™ + SIC With SCR, current sense in emitter
UPS, chargers 10-FZ062TA099FH1-P980D18 600V 25A CooIMOS™ + SIC 1
Default: W/o SCR, current sense in collector
W Available with 01: With SCR, current sense in collector

Press-fit pins 10-FZ062UA032FP1-P98x 600V 30A Parallel switch: 1

10: W/o SCR, current sense in collector
CooIMOS™ // PT IGBT 11: With SCR, current sense in collector
+ STEALTH™ II 12: W/o SCR, current sense in emitter
13: With SCR, current sense in emitter
Housing 10-FZ062TA030FB1-P98x 600V 30A High speed IGBT2
W flow 0 17mm 2-clip + STEALTH™ II
1
Default: W/o SCR, current sense in collector
W flow 0 12mm 2-clip 10-FZ062UA040FP1-P98x 600V 40A Parallel switch: CooIMOS™ // 01: With SCR, current sense in collector
PT IGBT + STEALTH™ II 02: W/o SCR, current sense in emitter
03: With SCR, current sense in emitter
10-FZ062TA040FB1-P98x 600V 50A High speed IGBT2
+ STEALTH™ II

SOLAR TOPOLOGIES
FZ06BIA045FH01
flowSOL 0
Transformerless,
Single Phase

W High efficiency
W Dedicated designs for
transformer-based and
FZ06BIA045FH02
transformerless
topologies
W Ultra high switching
frequency

Housing
W flow 0 12mm 2-clip
Part-No Voltage Current1) Comments
10-FZ06BIA045FH-P897E 600V 20A 45 mOhm (boost + H-bridge)
+ SiC in boost and H-bridge
10-FZ06BIA045FH01-P897E10 600V 20A 45 mOhm (boost + H-bridge)
+ SiC in boost
10-FZ06BIA045FH02-P897D 600V 20A 45 mOhm (boost + H-bridge)
+ SiC in boost and H-bridge,
open emitter
10-FZ06BIA070FS-P894E 600V 12A 70 mOhm (boost + H-bridge)
+ SiC in boost and H-bridge
10-FZ06BIA099FS-P893E 600V 10A 99 mOhm (boost + H-bridge)
+ SiC in boost and H-bridge

1) Rated current of components

28

Downloaded from Arrow.com.

 FZ06BIA083FI

V23990-P628-F64-PM*

flowSOL 0
Transformerbased,
Single Phase

W High efficiency,
CoolMOS™ + SiC FZ06RIA045FH

diode
W Ultra high switching
frequency
W Use FZ06RIA045FH
with FZ06BIA083FI or
V23990-P628-F64-PM
Part-No Voltage Current1) Comments
Housing 10-FZ06BIA083FI-P896E 600V 12A Primary, 45mOhm + SiC diode (boost)
W flow 0 12mm 2-clip + H-bridge with 83mOhm CFD
10-FZ06RIA045FH-P906D 600V 20A Secondary, ultra fast rectifier + 45mOhm,
SiC highside rectifier
10-FZ06RIA045FH01-P906D10 600V 20A Secondary, ultra fast rectifier + 45mOhm,
STEALTH™ II highside rectifier
V23990-P628-F64-PM 900V 26A Primary, CoolMOS™ C3 120mOhm,
fsw < 250kHz, parallel boost

BOOSTER
flowBOOST 0
Symmetric
with bypass diodes

W High efficiency
symmetric boost
W Dedicated designs for
solar and UPS
applications
W Ultra high switching Part–No Voltage Current1) Comments
frequency 10-FZ06NBA045FH-P915L 600V 35A Dual boost + 45mOhm, SiC diodes
W Use together with
flowNPC 0

Housing
W flow 0 12mm 2-clip

* Without booster

29

Downloaded from Arrow.com.

 BOOSTER
flowBOOST 0
Symmetric

W High efficiency
symmetric boost
W Dedicated designs for
solar and UPS
applications
10-FZ06NBA*FP*-M306 10-FZ06NBA0*SA-P916
W Ultra high switching
frequency
W Use together with Part –No Voltage Current1) Comments
flowNPC 0 10-FZ06NBA075SA-P916L33 600V 75A
10-FZ06NBA050SA-P915L33 600V 50A IGBT3
Housing 10-FZ06NBA030SA-P914L33 600V 30A
10-FZ06NBA110FP10-M306L18 600V 110A Dual boost, 110A, parallel switch, ultra fast diode
W flow 0 12mm 2-clip
10-FZ06NBA110FP-M306L28 600V 110A Dual boost, 110A, parallel switch, SiC diode
10-FZ06NBA084FP10-M306L38 600V 84A Dual boost, 84A, parallel switch, ultra fast diode
10-FZ06NBA084FP-M306L48 600V 84A Dual boost, 84A, parallel switch, SiC diode

flowBOOST 2
Symmetric

W High efficiency
symmetric boost
W Dedicated designs
for solar and UPS
applications
W Ultra high switching
frequency
W Use together with
Part –No Voltage Current1) Comments
flowNPC 2
30-F206NBA200SA-M235L33 600V 200A Dual boost, 200A, IGBT3
30-F206NBA200SG-M235L25 600V 200A Dual boost, 200A, IGBT3 high speed
Housing
30-F206NBA200FP-M235L 600V 200A Dual boost, 200A, parallel switch
W flow 2

1) Rated current of components

30

Downloaded from Arrow.com.

 V23990-P621-F68-PM
flowBOOST 0
Dual

W 2x900V/120mOhm
CoolMOS-C3 or
W 2x1200V/64A highspeed
IGBT or
10-PZ12B2A025FN-M330L08Y V23990-P629-F62-PM
W 4X100mOhm SiC JFET
1200V SiC diodes
W Bypass rectifier

Housing
W flow 0 12mm 2-clip

Part –No Voltage Current1) Comments

V23990-P621-F68-PM 900V 2x120mOhm CoolMOS-C3 + SiC; bypass diode
V23990-P629-F62-PM 1200V 2x64A Ultra fast IGBT + SiC diodes, bypass diode
V23990-P629-F72-PM 1200V 2x64A Ultra fast IGBT + STEALTH™ II diodes,
bypass diode
10-PZ12B2A025FN-M330L08Y 1200V 2 X 80A 4x100mOhm SiC JFET + SiC diode

NPC
flowNPC 0

W High efficiency three-

level half-bridge
(2 x 600V = 1200V)
W Dedicated designs for NI NR NP
solar and UPS
applications
Part –No Voltage Current1) Comments
W Ultra high switching
10-FZ06NRA045FH-P965F 600V 30A CoolMOS CP + IGBT3,
frequency SiC diodes + reactive power
W Compatible with 10-FZ06NRA045FH01-P965F10 600V 30A CoolMOS CP + IGBT3,
flowBOOST 0 Symmetric STEALTH™ II diodes, reactive power
10-FZ06NPA045FP-P967F 600V 50A Parallel switch (CoolMOS + IGBT PT)
SiC diodes, reactive power
Housing
10-FZ06NPA045FP01-P967F10 600V 50A Parallel switch (CoolMOS + IGBT PT)
W flow 0 12mm 2-clip STEALTH™ II diodes, reactive power
10-FZ06NPA070FP-P969F 600V 70A Parallel switch (CoolMOS + IGBT PT)
SiC diodes, reactive power
10-FZ06NPA070FP01-P969F10 600V 70A Parallel switch (CoolMOS + IGBT PT)
STEALTH™ II diodes, reactive power
10-FZ06NIA045FH-P925F 600V 75A CoolMOS CP + IGBT3 + SiC diodes
10-FZ06NIA045FH01-P925F10 600V 75A CoolMOS CP + IGBT3 + STEALTH™ diodes
10-FZ06NIA030SA-P924F33 600V 30A IGBT3
10-FZ06NIA050SA-P925F33 600V 50A IGBT3
10-FZ06NIA075SA-P926F33 600V 75A IGBT3

31

Downloaded from Arrow.com.

 NPC
flowNPC 1

W High efficiency
three-level half-bridge
(2 x 600V = 1200V)
W Trench Fieldstop
Technology IGBT3
W Low inductance layout
W For solar, UPS and
motor drives

Housing Part –No Voltage Current1) Comments

W flow 1 17mm 10-F106NIA100SA-M135F 600V 100A IGBT3
10-F106NIA150SA-M136F 600V 150A IGBT3

flowNPC 2

W High efficiency
three-level half-bridge
(2 x 600V = 1200V)
W Trench Fieldstop
Technology IGBT3
W Low inductance layout
W For solar, UPS and
motor drives
W Compatible with
flowBOOST 2 Part –No Voltage Current1) Comments
Symmetric 30-F206NIA075SA05-M245F31 600V 75A IGBT3
30-F206NIA150FP-M104F20 600V 150A Parallel switch
Housing 30-F206NIA200SA-M105F 600V 200A IGBT3
W flow 2 30-F206NIA200SG-M105F25 600V 200A IGBT3 high speed 3
30-F206NIA300SA-M106F 600V 300A IGBT3

1) Rated current of components

32

Downloaded from Arrow.com.

 MNPC
10-PZ12NMA025FN-m340F08Y
flowMNPC 0

W High efficiency three-

level half-bridge
W Dedicated designs
for solar and UPS
applications
W Ultra high switching
frequency 10-FZ12NMA080SH-M269
W Compatible with
flowBOOST 0
Symmetric

Housing
W flow 0 12mm 2-clip

Part –No Voltage Current1) Comments

10-FZ12NMA080SH-M269 1200V 80A IGBT4 high speed 3
10-PZ12NMA025FN-M340F08Y 1200V 80A 4x100mOhm SiC JFET

flowMNPC 1

W High efficiency three-

level half-bridge
W Dedicated designs for
solar and UPS
applications
W Ultra high switching
frequency

Housing Part –No Voltage Current1) Comments

W flow 1 12mm 10-F112NMA160SH-M420 1200V 160A IGBT4 high speed 3

33

Downloaded from Arrow.com.

 MNPC
3xflowMNPC 4W
1200V

W High efficient three-phase

mixed voltage NPC
W Low stray inductance
with integrated DC
snubber capacitors
W Screw terminals
W Dedicated for high
efficient solar and UPS
Part –No Voltage Current1) Comments
applications
70-W612M3A600SC-M200E 1200V 600A IGBT4
70-W612M3A400SC-M209E 1200V 400A IGBT4
70-W612M3A300SC-M208E 1200V 300V IGBT4
Housing
W flowSCREW 4W

3xflowMNPC 4W
2400V

W High efficient
three-phase NPC
W Low stray inductance
with integrated DC
snubber capacitors
W Screw terminals
W Dedicated for
high efficient solar
applications

Housing
W flowSCREW 4W Part –No Voltage Current1) Comments
70-W624N3A320SH-M400E 2400V 400A IGBT4-HS3

1) Rated current of components

34

Downloaded from Arrow.com.

 Housing Dimensions
flow 0 17mm 2-clip

Housing Dimensions:
Height: 17mm
Length: 66mm
Width: 33mm
long direction convexity
max. 0,2 mm

flow 0 12mm 2-clip

Housing Dimensions:
Height: 12mm
Length: 66mm
Width: 33mm
long direction convexity
max. 0,2 mm

35

Downloaded from Arrow.com.

 flow 0 17mm 4-clip

Housing Dimensions:
Height: 17mm
Length: 66mm
Width: 33mm long direction convexity
max. 0,2 mm

flow 1 12mm
Pinout area

Housing Dimensions:
1,7 –0,3

Height: 12mm
Length: 82mm
3,4

12,04 –0,3
16,2 –0,5
0,14 –0,1

Width: 38mm 0,15 – 0,1 Convexity

82 –0,5
71 –0,2 5,5 +0,2

4,3 +0,2
30,8 –0,2
37,4

20

2 –0,1
Pinout area

36

Downloaded from Arrow.com.

 flow 1 17mm

Housing Dimensions:
Height: 17mm
Length: 82mm
Width: 38mm

flow 1B

Housing Dimensions:
Height: 16mm
Length: 72mm
Width: 36mm

37

Downloaded from Arrow.com.

 flow 2

Housing Dimensions:
Height: 17mm
Length: 108mm
Width: 47mm

flow90 1

Housing Dimensions:
Height: 28mm
Length: 84mm
Width: 21mm

38

Downloaded from Arrow.com.

 flowSCREW 2

Housing Dimensions:
Height: 17mm
Length: 117mm
Width: 64mm

flowSCREW 3

Housing Dimensions:
Height: 17mm
Length: 150mm
Width: 64mm

39

Downloaded from Arrow.com.

 flowSCREW 4W

Housing Dimensions:
Height: 40mm
Length: 317mm
Width: 130mm

flat 1

Housing Dimensions:
Height: 13mm
Length: 108mm
Width: 47mm

40

Downloaded from Arrow.com.

 MiniSKiiP® 0
ø 6,6

30,5
Housing Dimensions:

3,2
Height: 16mm
Length: 34mm
3,2
Width: 31mm

1,5 (1-2,5)
33,5

2,8
15,8
30,5

6,5
3,2
1,5 (1-2,5)

15,8
MiniSKiiP® 1

Housing Dimensions:
Height: 16mm
Length: 42mm
Width: 40mm

41

Downloaded from Arrow.com.

 MiniSKiiP® 2

Housing Dimensions:
Height: 16mm
Length: 59mm
Width: 52mm

MiniSKiiP® 3

Housing Dimensions:
Height: 16mm
Length: 82mm
Width: 59mm

42

Downloaded from Arrow.com.

 MiniSKiiP Options ®

MiniSKiiP® modules
with pre-applied thermal paste

Lids
Two lids are available for all
MiniSKiiP® modules:

W Standard 6.5mm-high version allowing SMD parts to be mounted

below the lid
W Ultra thin 2.8mm-high version sized for highly compact mechanical designs

Standard Lid Thin Lid

Thermal Paste
Vincotech offers MiniSKiiP® modules with pre-applied thermal paste.

Features: W Faster and easier assembly of the module

W Thermal conducting material with optimized thickness
W Lower thermal resistance and reduced risk of DCB cracking
W Easier production process; no need for screen printing facilities
W Automated screen printing for utmost precision and reliability
W Standard solder profile applicable (e.g. J-STD-001, J-STD-003)

Properties Material Wacker® Paste 12

Thermal conductivity 0.81W/m*k

Order Codes Option codes for MiniSKiiP® options are:

Example order code V1:
V23990-K220-A40-/1A/-PM Option Code Lid Thermal Paste P12
/0A/ Standard (6.5mm) –
Example order code V2:
80-M206BIA045FH-K999E10-/1A/ /1A/ Standard (6.5mm) Applied
/0B/ Thin (2.8mm) –
Please ask your sales rep /1B/ Thin (2.8mm) Applied
about the availability of
MiniSKiiP® options.

43

Downloaded from Arrow.com.

 Phase Change Material
Pre-applied thermal conducting
material

The benefits of using phase change

material for thermal conducting between
the module and heat sink are considerable. This material is solid at
room temperature. This makes it smear-resistant during transportation
and when assembling the module. The screen-printing process is very
accurate, so the material’s thickness is well defined and can be
optimized for maximum heat transfer capability.

W Faster and easier assembly of the module

Features:
W Thermal conducting material with optimized thickness
W Better Rth and reduced risk of DCB cracking
W Easier production process; no need for screen printing facilities
W Automated screen printing for utmost precision and reliability
W No risk of smearing the thermal paste; material is solid a room
temperature
W Standard solder profile applicable (e.g. J-STD-001, J-STD-003)

Properties Parameter Value Unit

Thermal conductivity 3.4 W/m*K
Phase change temperature +45 °C

Order Codes
Option code for the phase
change material for flow 0 and
flow 1 modules is /3/ (see also
page 42).
Example order code V1:
V23990-P840-A48-/3/-PM
Example order code V2:
10-FZ06BIA045FH01-P897E10-/3/
Please ask your sales rep
about the availability of phase
change material.

44

Downloaded from Arrow.com.

 Save Time – Press in!
Press-fit Technology

Vincotech‘s new Press-fit technology reduces PCB assembly time

and effort considerably. Well established in the automotive industry,
the Press-fit pin eliminates the need for soldering. This cuts process
time and costs, and boosts production output capacity. With no need
to solder modules, engineers enjoy far great flexibility in design.
The module can easily be mounted on the other side of the PCB at
no extra cost and effort.

W Approved rounded Press-fit area Example of Press-In Equipment

Features:
W Complies with DIN and IEC standards
Block
W Tapered pin head to apply Force

W Same Press-fit area for all power ranges Module

W Available in three versions, covering all PCB
Vincotech power module families:
– For 12mm base plate-less housings Press-In Tool
– For 17mm base plate-less housings
– For 17mm housings with base plate

W Eliminates costly additional soldering process

Benefits:
W Pins are compatible with legacy solder pin modules
W Very high current capability (30A @ 80°C)
W Reliable cold welding connection to PCB
W No PCB hole damage, allowing for reuse
W Thermo-mechanical push and
pull-force relief
Order Codes W Flexible mounting onto the power
module DCB
Order code V1:
Press-fit option is shown as W Cuts production costs
an additional letter Y at the end
of option code (see also page 42).
Example order code V1:
V23990-P840-F49Y-PM
Order code V2:
Press-fit option is shown as
alternative housing
(see also page 42).
Example order code V2:
10-PZ06BIA045FH01-P897E10
Please ask your sales rep
about the availability of
Press-fit options.
45

Downloaded from Arrow.com.

 Description – Naming System
Vincotech is transitioning to a new, more consistent naming system
for power modules.

VERSION 1
This ordering code is Leading Number: Product Identification
identical with the product V23990: Power modules First two digits: Product family identifier
V23109: Relays Last digit: Module identifier
name shown here. It remains S30814: Hybrids Modules are listed from lowest to highest power Part Number
valid for all products released (e.g. 600V/5A – 1200V/15A) Ending
before mid-2009 and
subsequent releases within
product families established
before 2009.
V23990 - P 5 69 - F31 Y - /1/ - PM

Product Classification: Option Code Option Code 2 (optional)

P: flow power modules Different housings Phase change material
K: MiniSKiiP® power modules Optional DCB material (see also page 40)
S: Relays Optional parts (e.g. brake)
Q: Hybrids Y as last letter: MiniSKiiP® options
Press-fit option (see also page 41) (see also page 39)

Voltage Pinout Current/RDS(on) Internal Identifier

VERSION 2 06: 600V Modules with same topology, 045 (IGBT): 45A
09: 900V same housing, and same pinout 045 (MOS): 45mOhm
07: 650V have same character
12: 1200V

Technology Group
for UL notification
10 - FZ 06 BI A 045 FH 01 - P623F10 - /1/

Version 2 introduces a new Housing Options Option Code (optional)

Solder Pins E.g. alternative parts Phase change material
name and ordering code for
FZ: flow 0 12mm (see also page 40)
products released after F0: flow 0 17mm
mid-2009. F1: flow 1 MiniSKiiP® options
FB: flow 1B Topology (see also page 39)
- The new product name FY: flow 1 12mm 2P: Half-Bridge
describes the module’s F2: flow 2 2T: Rectifier + PFC Chip Technology
R1: flow90 1 2U: Rectifier + P-Switch PFC
characteristics. S2: flowSCREW 2 SA: IGBT3 Standard
BI: Boost + inverter SB: IGBT3 Low Loss
S3: flowSCREW 3 IP: IPM w/o brake, with PFC
- The new ordering code SG: IGBT3 High Speed
Press-Fit Pins NB: Symmetric boost SC: IGBT4 Low Power
extends the product’s name. NI: NPC
PZ: flow 0 12mm SH: IGBT4 High Speed
It is listed in the product P0: flow 0 17mm NP: NPC parallel switch FB: IGBT2 High Speed
data sheet. P1: flow 1 NR: NPC reactive power FE: IGBT2 Phantom Speed
PB: flow 1B NM: MNPC FH: CoolMOS CP
PB: flow 1 12mm RI: Rectifier + inverter FS: CoolMOS C6
P2: flow 2 FI: CoolMOS CFD
T2: flowSCREW 2 FP: Parallel Switch
T3: flowSCREW 3 MC: MOSFET + SiC
W6: flowSCREW 4W MF: MOSFET + Fast Diode
MiniSKiiP®
M0: MiniSKiiP® 0
M1: MiniSKiiP® 1
M2: MiniSKiiP® 2 Order Code Product Name
M3: MiniSKiiP® 3 (find in product data sheet)

46

Downloaded from Arrow.com.

 Simulation Software
Vincotech ISE

The Integrated Simulation Environment

The Vincotech ISE is an integrated simulation and selection environment
for power and solar modules. The program contains updated versions
of the previously introduced applications flowSIM and flowSEL and new
applications such as flowSOL and flowMIS.

2 3 4

Software Download: 1 flowSIM is a tool that interactively calculates power dissipations and
Step 01: temperatures using Vincotech power modules. It helps you select the
Download and install LabVIEW right devices for your application. Its power loss and device temperature
Runtime Engine once (if not calculations are based on fully measured parameters.
already installed).
Direct link: 2 flowSEL is a tool that helps you choose the right driver stage for
www.vincotech.com/simulation_software.html
your application. Using the generated curves as sources, you can obtain
Step 02: information about current, power and temperature conditions for your
Download Vincotech ISE.exe
application.
into your simulation directory.
Step 03: 3 flowSOL is a simulation tool for solar modules. The program is based
Start Vincotech ISE.exe
on and behaves much like flowSIM.

4 flowMIS is a tool that simulates the power and temperature

characteristics of modules excited with a given mission profile.

47

Downloaded from Arrow.com.

 Vincotech Locations

Copenhagen
Unterhaching Berlin
Bicske
Lyon Bologna
Chicago
Seoul
Shanghai
Shenzhen Taipeh

Headquarters
Design Center
Sales Offices
Manufacturing

Vincotech, an independent company within the Mitsubishi Electric Corporation is a market leader in power
modules. The enterprise develops and manufactures high-quality electronic power components for Motion
Control, and Renewable Energy applications. With some 500 employees worldwide, backed by vast
experience and a long history in electronics integration, Vincotech leverages these assets to help customers
attain maximum market success.
Headquartered in Unterhaching near Munich, Germany, Vincotech also owns and operates a site in Bicske,
Hungary. The ISO9001- and TS16949-certified factory in Hungary develops and manufactures all power
modules. Engineered to comply with the RoHS standard, these modules are subjected to a battery of
electrical and functional tests prior to packaging to ensure they fully satisfy Vincotech’s rigorous standards
for quality.
The name Vincotech stands for highest product reliability, excellent customer service, and flexible,
competitive solutions, all of which culminate in outstanding customer satisfaction.
Vincotech, your reliable partner!

The information provided herein is believed to be reliable at press time. Vincotech

assumes no responsibility for inaccuracies or omissions. Vincotech assumes no Your local contact:
responsibility for the use of this information, and all such information shall
be entirely at the users own risk. Prices and specifications are subject to change
without notice. Vincotech does not authorize or warrant any of its products for
use in life-support devices and / or systems.

RoHS
Ready
Copyright © 2011 · Vincotech GmbH · Printed in Germany · Vincotec-005-0511.3-E

COOLMOS is a trademark of Infineon Technologies AG.

Fairchild is a trademark. STEALTH is a trademark of Fairchild Semiconductors.
SEMIKRON is a trademark. MiniSKiiP is a trademark of SEMIKRON
Elektronik GmbH & Co. KG.
Vincotech is a trademark. flowPIM is a trademark of Vincotech Holdings S.à.r.l.
Wacker is a trademark of Wacker Chemie AG.

Vincotech GmbH
Biberger Straße 93
82008 Unterhaching/Munich
Germany
Tel.: +49 (0)89 8780 67-0
Fax: +49 (0)89 8780 67-300
www.vincotech.com

Downloaded from Arrow.com.