DoCanReConEng

Simulation of Part1
Date: Wednesday, June 30, 2021
Designer: IQBAL
Study name: lifting lug
Analysis type: Static

Table of Contents
Description...........................................1
Assumptions..........................................2
Model Information..................................2
Study Properties.....................................3
Units..................................................3
Material Properties.................................4
Loads and Fixtures..................................4
Connector Definitions..............................5
Description Contact Information................................5
No Data Mesh information....................................6
Sensor Details........................................7
Resultant Forces....................................7
Beams.................................................7
Study Results........................................8
Conclusion..........................................10

Analyzed with SOLIDWORKS Simulation Simulation of Part1 1

 DoCanReConEng IQBAL
6/30/2021

Assumptions

Model Information

Model name: Part1

Current Configuration: Default

Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Boss-Extrude1
Mass:2.23321 kg
Volume:0.000284486 m^3
Solid Body Density:7850 kg/m^3
Weight:21.8855 N

Analyzed with SOLIDWORKS Simulation Simulation of Part1 2

 DoCanReConEng IQBAL
6/30/2021

Study Properties
Study name lifting lug
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from Off
SOLIDWORKS Flow Simulation
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document (c:\users\asus\appdata\
local\temp)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of Part1 3

 DoCanReConEng IQBAL
6/30/2021

Material Properties
Model Reference Properties Components
Name: ASTM A36 Steel SolidBody 1(Boss-Extrude1)
Model type: Linear Elastic Isotropic (Part1)
Default failure Max von Mises Stress
criterion:
Yield strength: 2.5e+008 N/m^2
Tensile strength: 4e+008 N/m^2
Elastic modulus: 2e+011 N/m^2
Poisson's ratio: 0.26
Mass density: 7850 kg/m^3
Shear modulus: 7.93e+010 N/m^2

Curve Data:N/A

Analyzed with SOLIDWORKS Simulation Simulation of Part1 4

 DoCanReConEng IQBAL
6/30/2021

Loads and Fixtures

Fixture name Fixture Image Fixture Details
Entities: 2 face(s)
Type: Fixed Geometry

Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) -69343.7 -69349.3 2.04817 98070.7
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details

Entities: 1 face(s)
Type: Apply force
Values: ---, ---, -98066.5 N
Force-1

Connector Definitions
No Data

Contact Information
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part1 5

 DoCanReConEng IQBAL
6/30/2021

Mesh information
Mesh type Solid Mesh
Mesher Used: Standard mesh
Automatic Transition: Off
Include Mesh Auto Loops: Off
Jacobian points 4 Points
Element Size 6.57867 mm
Tolerance 0.328934 mm
Mesh Quality High

Mesh information - Details

Total Nodes 11389
Total Elements 7248
Maximum Aspect Ratio 3.2309
% of elements with Aspect Ratio < 3 100
% of elements with Aspect Ratio > 10 0
% of distorted elements(Jacobian) 0
Time to complete mesh(hh;mm;ss): 00:00:00
Computer name:

Analyzed with SOLIDWORKS Simulation Simulation of Part1 6

 DoCanReConEng IQBAL
6/30/2021

Sensor Details
No Data

Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -69343.7 -69349.3 2.04817 98070.7

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part1 7

 DoCanReConEng IQBAL
6/30/2021

Study Results

Name Type Min Max

Stress1 VON: von Mises Stress 1.50738e-006 50.6953 N/mm^2
N/mm^2 (MPa) (MPa)
Node: 7754 Node: 10737

Part1-lifting lug-Stress-Stress1

Analyzed with SOLIDWORKS Simulation Simulation of Part1 8

 DoCanReConEng IQBAL
6/30/2021

Name Type Min Max

Displacement1 URES: Resultant Displacement 0 mm 0.0111692 mm
Node: 106 Node: 71

Part1-lifting lug-Displacement-Displacement1

Name Type Min Max

Strain1 ESTRN: Equivalent Strain 3.87677e-006 0.00019289
Element: 3198 Element: 6401

Analyzed with SOLIDWORKS Simulation Simulation of Part1 9

 DoCanReConEng IQBAL
6/30/2021

Name Type Min Max

Part1-lifting lug-Strain-Strain1

Name Type
Displacement1{1} Deformed shape

Part1-lifting lug-Displacement-Displacement1{1}

Conclusion

Analyzed with SOLIDWORKS Simulation Simulation of Part1 10