SAV5327

PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 W43RD STREET NY, NY 10036
VOL. 53, NO. 27 JULY 8, 2022
CONTENTS
American National Standards

Project Initiation Notification System (PINS) ............................................................. 2
Call for Comment on Standards Proposals .............................................................. 12
Final Actions - (Approved ANS) ................................................................................47
Call for Members (ANS Consensus Bodies) ............................................................. 51
American National Standards (ANS) Process ........................................................... 58
ANS Under Continuous Maintenance ...................................................................... 59
ANSI-Accredited Standards Developer Contacts ..................................................... 60
International Standards
ISO and IEC Draft Standards .................................................................................... 62
ISO and IEC Newly Published Standards .................................................................. 68
International Organization for Standardization (ISO) .............................................. 71
Information Concerning
Registration of Organization Names in the United States ....................................... 73
Proposed Foreign Government Regulations ............................................................74
© 2022 by American National Standards Institute, Inc. ISSN 0038-9633

ANSI members may reproduce for internal distribution. Journals may excerpt items in their fields
ANSI Standards Action - July 8, 2022 - Page 2 of 111 pages
Project Initiation Notification System (PINS)

Section 2.5.1 of the ANSI Essential Requirements (www.ansi.org/essentialrequirements) describes the Project Initiation Notification
System (PINS) and includes requirements associated with a PINS Deliberation. Following is a list of PINS notices submitted for
publication in this issue of ANSI Standards Action by ANSI-Accredited Standards Developers (ASDs). Please also review the section in
Standards Action entitled "American National Standards Maintained Under Continuous Maintenance" for information about
American National Standards (ANS) maintained under the continuous maintenance option, as a PINS to initiate a revision of such
standards is not required. Use the following Public Document Library url to access PDF & EXCEL reports of approved & proposed
ANS: List of Approved and Proposed ANS. Directly and materially interested parties wishing to receive more information or to
submit comments are to contact the sponsoring ANSI-Accredited Standards Developer directly within 30 calendar days of the
publication of this PINS announcement.
ASTM (ASTM International)

Laura Klineburger; accreditation@astm.org | 100 Barr Harbor Drive | West Conshohocken, PA 19428-2959 www.astm.org
New Standard
BSR/ASTM WK82223-202x, New Specification for Standard Specification for IBC Special Inspection services
(new standard)
Stakeholders: Agencies Performing Construction Inspection, Testing and Special Inspection Industry
Project Need: Since the mass adoption of the International Building Code, by all 50 States, the need for
Standards written to the Special Inspection Agency and the Special Inspectors, on how to effectively complete
their inspections has become increasingly relevant. ASTM does not have a Standard on the Specification for
Special Inspection.
Interest Categories: Producer, User, General Interest
Scope: The purpose of this specification is to establish requirements for the Special Inspection Agency and their
Special Inspectors, in the daily exercise of their service. These requirements will be in conformance with the Test
Methods and Standard Practices of ASTM and the currently adopted International Building Code (2018 IBC),
including methods for field verification and laboratory testing, as reflected in the Construction Documents.
BHMA (Builders Hardware Manufacturers Association)

Michael Tierney; mtierney@kellencompany.com | 17 Faulkner Drive | Niantic, CT 06357 www.buildershardware.com
Revision
BSR/BHMA A156.16-202x, Standard for Auxiliary Hardware (revision of ANSI/BHMA A156.16-2013 (R2018))
Stakeholders: Manufacturers, building owners, builders, architects, specifiers and consumers.
Project Need: Five-year maintenance and update.
Interest Categories: Producers, Laboratories, General Interest, Users, Government.
Scope: This Standard establishes requirements for auxiliary hardware and includes performance tests ‎covering
operational, cyclical, strength, or finish criteria.‎

ESTA (Entertainment Services and Technology Association)

Richard Nix; standards@esta.org | 271 Cadman Plaza, P.O. Box 23200 | Brooklyn, NY 11202-3200 www.esta.org
Revision
BSR/E1.50-1-202x, Requirements for the Structural Support of Temporary LED, Video & Display Systems
(revision of ANSI E1.50-1-2017)
Stakeholders: Video wall owners and manufacturers, equipment rental houses, structural engineers, concert
touring riggers, production management, and performers.
Project Need: The existing standard is being opened for revision, to update its requirements and references to
externally referenced standards.
Interest Categories: Custom market producers, mass market producers, dealer or rental companies, designers,
users, and general interest.
Scope: The scope of this standard covers LED and other self-illuminated video display structures used as part of
the scenery in concerts, theatre shows, and special events. The standard includes advice on planning and site
preparedness, assembly and erection, suspension and safety of components, special access requirements, and
the use and dismantling of these systems.
IEEE (Institute of Electrical and Electronics Engineers)

Lisa Weisser; l.weisser@ieee.org | 445 Hoes Lane | Piscataway, NJ 08854-4141 www.ieee.org
New Standard
BSR/IEEE 260.3-202x, Standard Mathematical Signs and Symbols for Use in Physical Sciences and Technology
(new standard)
Stakeholders: Producers of technical documents with mathematical signs and symbols, and users of those
technical documents.
Project Need: Std 260.3 was last revised in 1993 and last reaffirmed in 2012, so it will be going inactive at the
end of 2022. Std 260.3 is referenced by many standards, including those of the AESS/IEEE Gyro and
Accelerometer Panel, so it is important to keep this standard current and active.
Interest Categories: A subset of the interest categories on this list is expected to comprise the consensus body:
https://ieee.box.com/v/Interest-Categories.
Scope: Only signs and symbols used in writing mathematical text are contained in this Standard. Special symbols
peculiar to certain branches of mathematics, such as non-Euclidean Geometries, Abstract Algebras, Topology,
and Mathematics of Finance, which are not ordinarily applied to the physical sciences and engineering, are not
included. Symbols used in tensor analysis are also not included.


New Standard
BSR/IEEE 1276a-202x, Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed
Distribution, Power, and Regulating Transformers Amendment: Updates to Annex B and corresponding references
in Annex D (new standard)
Stakeholders: Distribution, Power and Regulating Transformer Users, Designers and Manufacturers.
Project Need: The current guide needs to be updated to include new industry use cases and knowledge so that it
remains an active tool for the application of high temperature insulation materials in distribution, power, and
regulating transformers.
Scope: This guide applies to liquid-immersed distribution, power, and regulating transformers that are designed
to operate at temperatures that exceed the normal thermal limits of IEEE Std C57.12.00 under continuous load,
in the designed average ambient, and at rated conditions.

New Standard
BSR/IEEE 1310-202x, Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for
Large Rotating Machines (new standard)
Stakeholders: Large generator manufacturers, electric power utilities, and thermal cycle test providers.
Project Need: This recommended practice is needed to define a test method that enables independent parties to
conduct thermal cycle testing in the same way so that the ability to resist thermal cycling of stator bars and coils
from different vendors can be compared.
Scope: This recommended practice describes a test procedure used for individual form-wound bars/coils for
rotating machines typically rated 10 kV or more at 50 Hz or 60 Hz that are subjected to many transitions from no-
load to full-load current during normal operations, and where rapid load variations are typical. Only the thermal
cyclic degradation due to delamination of the groundwall insulation and debonding of the groundwall insulation
from the conductor stack are addressed by this test. Examples of indirectly (conventionally) cooled machine types
that typically experience rapid load transitions include: Combustion turbine generators, Pumped storage or
peaking duty hydrogenerators, Synchronous condensers, and Cyclic duty water pump motors.
Various pass/fail criteria are defined, to facilitate agreement between the user and the manufacturer on the
criteria that apply in a specific circumstance, prior to the commencement of testing.


Revision
BSR/IEEE 3004.8-202x, Recommended Practice for Motor Protection in Industrial and Commercial Power
Systems (revision of ANSI/IEEE 3004.8-2016)
Stakeholders: Those interested in, or responsible for, protection of electric motors typically used in industrial and
commercial power systems.
Project Need: This recommended practice is an aid to all engineers responsible for the electrical design and
application of industrial and commercial power systems. Using these techniques for industrial and commercial
motor protection helps to reduce protection errors and false tripping, assists in improving reliability, and aids in
increasing productivity. The existing Recommended Practice is updated to reflect up-to-date motor protection
practices, revise reference standards, include new motor technologies and motor protection methods. The
revision updates condition monitoring techniques. General updates for new technologies are included for low-
voltage and medium-voltage motor protection. This information is mainly used in the industrial and commercial
power systems applications by users, manufacturers, and designers for electric motor protection.
Scope: This recommended practice describes the protection of electric motors used in industrial and commercial
power systems. The contents cover ac and dc motor protection including factors to consider in the protection of
motors, types of protection, and low-voltage and medium-voltage motor protection, including the motor branch
circuit, for fixed-speed and adjustable-speed drive applications. Motor protection during various operations is
included, such as motor starting and motor bus transfer. Recommended protection functions are included for
multifunction motor protection relays for contactor-controlled starters and breaker-controlled starters. Supportive
diagrams are also included. Technologies for condition monitoring of motors are included. Motor protection in
various environments is also included, such as hazardous (classified) locations.


New Standard
BSR/IEEE 3148-202x, Guide for Field Detection of Metallic Sheath Current of Single-conductor Shielded and
Cross-linked Polyethylene (XLPE) Insulated Alternating Current (AC) Cable (new standard)
Stakeholders: Electrical equipment manufacturers, utilities, energy service companies and other interested
entities.
Project Need: Standards for field detection of metallic sheath current are needed to standardize and guide testing
and diagnostic methods for metallic sheath bonding systems. Technical requirements for detection instruments
and the diagnosis criteria for defects in metallic sheath bonding system are needed. Based on a diagnosis result,
comprehensive correlation analysis can be carried out to further perform cable maintenance. The Cigre TB815
report released in 2020 identified 406 cases of cross-linked polyethylene cable failure from 2006 to 2015.
Internal failures accounted for 71%, and 40% of all internal faults were caused by defects in the oversheath.
Metallic-sheath-induced current detection technology can find defects such as damaged oversheath of a cable,
poor connection of a metallic sheath bonding system, and a damaged sheath voltage limiter. The Cigre TB825
report released in 2021 included a questionnaire survey on new methods of power cable condition maintenance,
conducted for 65 units. Among them, 11% of the respondents are applying metallic sheath current monitoring for
condition-based maintenance and are willing to expand their application experience of metallic sheath ground
current online monitoring equipment.
Scope: This guide describes a field detection method of metallic sheath induced current of single-conductor
shield XLPE insulated AC cable rated 110 kV to 500 kV, including the current detection method, the technical
requirements of detection instrument, and the diagnosis criteria for defects in a metallic sheath bonding system.

New Standard
BSR/IEEE 3149-202x, Trial Use Guide for Dissection Techniques of Form Wound Stator Coils and Bars (new
standard)
Stakeholders: Rotating equipment users and manufacturers, laboratories and material suppliers.
Project Need: A baseline of common techniques used for stator bar/coil dissections is needed to enable the
industry to draw conclusions based on common methodology.
Scope: The guide describes dissection techniques and methodologies for form wound stator coils and bars from
rotating machines. The techniques are for use at any point in the life cycle of a coil or bar, as dissection can be
done as part of a manufacturing process, after qualification test, after machine faults, and on coils and bars with
no faults. The guide applies to any given construction, including Vacuum Pressure Impregnation (VPI), Resin Rich
(RR), and Global Vacuum Pressure Impregnation (GVPI) and other systems. Due to the variety of construction,
materials, and manufacturing processes, the guide does not provide acceptance criteria for measurable
parameters.


New Standard
BSR/IEEE 3150-202x, Guide for Testing the Semi-Conductive Water Blocking Tape in Cross-Linked Polyethylene
Insulated Alternating-Current Power Cables (new standard)
Stakeholders: Power grid industry equipment designers, engineers and manufacturers, utility companies and
energy service companies.
Project Need: The properties and technical performance of semi-conductive water blocking tape is very important
for the operational stability of XLPE insulation AC power cable systems, which are widely used worldwide.
However, there is no unified standard for the technical parameters testing method for semi-conductive water
blocking tapes in power cables at present. Therefore, it is urgent to specify test methods for semi-conductive
water blocking tape, providing technical guidance and reference data for use in the design, manufacturing,
measurement, acceptance and operation of semi-conductive water blocking tape, to support efficient and
effective quality and performance improvements.
Scope: This guide defines and describes test methods and associated setups for semi-conductive water blocking
tape for Cross-Linked Polyethylene (XLPE) insulated Alternating-Current (AC) power cable of 110 kV to 500 kV.

New Standard
BSR/IEEE 3151-202x, Standard for Spray-On Surface Antimicrobial Coatings Test Methodology (new standard)
Stakeholders: Industry, medical, producers, consumers/users, healthcare workers, government agencies.
Project Need: There is currently no defined, independent standard for Healthcare Environmental Surface
Antimicrobial Coatings. There has been a growing interest in Antimicrobial Coatings in recent years which has
been propelled even further forward as a result of the SARS-CoV-2 pandemic.
Scope: This standard specifies an objective performance test methodology to assess the efficacy of non-porous
surface antimicrobial coatings against different organism groups (e.g., bacteriae, viruses, yeasts, and moulds)
present within hospital and healthcare environments. The standard is applicable to all types of environmental
surface antimicrobial coatings that are designed to be sprayed onto and coat the surface to provide continual
antimicrobial activity for a specified period of time. This standard excludes antimicrobial coatings (such as,
antimicrobial plastics, polymers, silicone, paints, etc.) incorporated during the manufacturing process and non-
environmental antimicrobial coatings specifically intended for medical devices.


Revision
BSR/IEEE C37.14-202x, Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures (revision
of ANSI/IEEE C37.14-2015)
Stakeholders: Manufacturers, designers, consulting engineers and users of DC (3200 V and below) power circuit
breakers.
Project Need: This standard was substantially revised during the last revision. This project is expected to include a
1200A Frame Rating for general-purpose circuit breakers, updates to references, and other changes to bring it up
to date with the other standards in the C37 series.
Scope: This standard covers the following types, preferred ratings, and testing requirements of enclosed dc power
circuit breakers: (a) Stationary or drawout type of one- or two-pole functional construction, (b) Having rated
maximum voltages of up to 3200 V, (c) Manually operated or power operated, and (d) With or without overcurrent
trip devices. NOTE--In this standard, the use of the term “circuit breaker” is considered to mean “enclosed dc
power circuit breaker.”

Revision
BSR/IEEE C57.12.01-202x, Standard for General Requirements for Dry-Type Distribution and Power
Transformers (revision of ANSI/IEEE C57.12.01-2015)
Stakeholders: Dry Type transformer manufacturers and owners.
Project Need: Over 15 items were identified by the Task Force to be addressed since the last revision.
Scope: This standard defines the electrical and mechanical requirements of single- and polyphase-ventilated,
nonventilated, and sealed dry-type distribution and power transformers or autotransformers, with a voltage of
601V or higher in the highest voltage winding. This standard applies to all dry-type transformers, including those
with solid-cast and/or resin encapsulated windings except as follows: (a) Instrument transformers, (b) Step and
induction-voltage regulators, (c) Arc-furnace transformers, (d) Rectifier transformers, (e) Specialty and general-
purpose transformers, (f) Mine transformers, (g) Testing transformers, (h) Welding transformers, (i) Drive
transformers, and (j) Inverter transformers.


New Standard
BSR/IEEE C57.12.53-202x, Guide for Mitigating Corrosion on Subsurface Transformers and Network Protectors
(new standard)
Stakeholders: Electric utilities, other equipment users, consulting engineers, contractors, and manufacturers.
Project Need: Corrosion of transformers and network protectors installed in subsurface structures has been a
persistent problem over time due to routine submersion of such equipment. A guide is needed to measure and
quantify the contributing factors to classify corrosion risk. There is uncertainty by many users on when to use
stainless steel submersible equipment enclosures, what specific stainless steel alloy to use, as well as when and
how to use sacrificial anodes. A guide is needed to summarize what strategies are available to mitigate corrosion,
so they may be incorporated into tailored specifications for equipment enclosures and cathodic protection.
Furthermore, a guide is needed to define what testing and measurements are needed to help ensure the
effectiveness of the corrosion mitigation strategies that are established.
Scope: This guide provides technical references for users of transformers and network protectors in subsurface
structures. This includes testing, measurements, and classifications to define corrosive environments, as well as
strategies to mitigate corrosion in subsurface environments, guidance on equipment enclosure specifications,
and cathodic protection.

New Standard
BSR/IEEE C57.12.91-202x, Standard Test Code for Dry-Type Distribution and Power Transformers (new standard)
Stakeholders: Users (electric utilities, industrial and commercial facilities) and manufacturers of dry type
distribution and power transformers.
Project Need: Since publication of the last revision of this standard, it has been recognized that some test
procedures described in the standard have had modifications proposed by stakeholders, are no longer used, or
are performed in a different way or with different test equipment to that described.
Scope: This standard describes methods for performing tests specified in IEEE Std C.57.12.01 and other
referenced standards applicable to dry-type distribution and power transformers, with a voltage of 601 V or higher
in the highest voltage winding. It is intended for use as a basis for performance and for the proper testing of dry-
type distribution and power transformers. This standard applies to all dry-type transformers including those with
solid cast and/or resin encapsulated windings, except as follows: (a) Instrument transformers, (b) Step-voltage
and induction voltage regulators, (c) Arc furnace transformers, (d) Rectifier transformers, (e) Specialty and
General Purpose transformers, (f) Mine transformers, (g) Testing transformers, (h) Welding transformers. (i) Drive
Transformers, and (j) Inverter Transformer.


Revision
BSR/IEEE C57.94-202x, Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-
Type Distribution and Power Transformers (revision of ANSI/IEEE C57.94-2015)
Stakeholders: Users and manufacturers of dry type distribution and power transformers.
Project Need: This project is needed to update C57.94. This project corrects errors that have been identified,
updates the document to reflect current advancements in technologies, and updates the document format to
align with current IEEE standard guidelines.
Scope: This recommended practice describes general recommendations for the installation, application,
operation, and maintenance of all single- and polyphase-ventilated, non-ventilated, and sealed dry-type
distribution and power transformers or autotransformers, including those with solid-cast and/or resin
encapsulated windings except transformers described as exceptions in IEEE Std C57.12.01. NOTE—Where IEEE
standards do not exist for the transformers mentioned above or for other special transformers, this standard may
be applicable as a whole or in parts subject to agreement between the parties responsible for the application and
for the design of the transformer.

New Standard
BSR/IEEE C62.11-202x, Standard for Metal-Oxide Surge Arresters for AC Power Circuits (1 kV) (new standard)
Stakeholders: Users, specifiers and manufacturers of metal oxide surge arresters.
Project Need: Improved knowledge of performance and application of metal oxide varistor (MOV) surge arresters
highlight deficiencies in existing design test procedures intended to verify suitability of an arrester for service.
Certain tests need to be modified, new tests need to be added and others need to be eliminated to better reflect
the needs. Clearer definition of the need for each test is required to serve as information for current users and to
provide a historical record for future revisions of the standard.
Scope: This standard applies to metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage
surges on 48-Hz to 62-Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting
the flow of system power current. This standard applies to devices for separate mounting and to devices supplied
integrally with other equipment.

NEMA (ASC C136) (National Electrical Manufacturers Association)

David Richmond; David.Richmond@nema.org | 1300 North 17th Street, Suite 900 | Rosslyn, VA 22209 www.nema.org
Revision
BSR C136.41-201X-202x, Standard For Roadway and Area Lighting EquipmentDimming Control Between an
External Locking Type Photocontrol and Ballast or Driver (revision of ANSI C136.41-2021)
Stakeholders: Lighting Controls Manufacturers, Utilities, End Users.
Project Need: Revise this document to limit to the scope to 0-10V and Dali for dimming control, update
references, contact designations, electrical requirements, and revise mechanical drawings.
Interest Categories: Producer Luminaire, Producer Other, Producer Poles, User, and General Interest.
Scope: This standard describes methods of light-level control between an external locking-type photocontrol (or
similar device) and a dimmable ballast or driver for street and area lighting equipment. Mechanical, electrical,
and marking requirements are established for dimming, locking-type photocontrols, and mating receptacles. All
requirements of ANSI C136.10-2010 for photocontrols and receptacles shall apply, except where specifically
superseded by this standard.
SDI (ASC A250) (Steel Door Institute)

Linda Hamill; leh@wherryassoc.com | 30200 Detroit Road | Westlake, OH 44145 www.wherryassocsteeldoor.org
Revision
BSR A250.4-202x, Physical Endurance for Steel Doors, Frames and Frame Anchors (revision of ANSI A250.4
-2018)
Stakeholders: Steel door and frame manufacturers and steel door and frame end-users.
Project Need: To maintain the five-year review cycle and revise the standard as needed.
Interest Categories: Consumers, producers, and individuals of general interest.
Scope: The primary purpose of this procedure is to establish a standard method of testing the performance of a
steel door mounted in a hollow metal or channel iron frame installed with appropriate anchors, under conditions
that might reasonably be considered an accelerated field operating condition.
TCNA (ASC A108) (Tile Council of North America)

Katelyn Simpson; KSimpson@tileusa.com | 100 Clemson Research Blvd. | Anderson, SC 29625 www.tcnatile.com
Revision
BSR A108.10-202x, Installation of Grout in Tilework (revision of ANSI A108.10-2017 (R2022))
Stakeholders: Ceramic tile installers, contractors, and builders (labor interest category), related material
manufacturers (manufacturing interest category), distributors, retailers and consumers (user interest category),
and affiliated industries and other general interest users of this standard (general interest category).
Project Need: Various stakeholders have suggested revisions be made to various sections of this standard.
Interest Categories: Manufacturer, Labor, General Interest, User.
Scope: This specification describes the minimum requirements for grouting ceramic tile with sand-portland
cement grout, standard sanded cement grout, standard unsanded cement grout, polymer modified sanded tile
grout, and polymer modified unsanded tile grout.

Call for Comment on Standards Proposals

American National Standards
This section solicits public comments on proposed draft new American National Standards, including the national adoption of ISO
and IEC standards as American National Standards, and on proposals to revise, reaffirm or withdraw approval of existing American
National Standards. A draft standard is listed in this section under the ANSI-accredited standards developer (ASD) that sponsors it
and from whom a copy may be obtained. Comments in connection with a draft American National Standard must be submitted in
writing to the ASD no later than the last day of the comment period specified herein. Such comments shall be specific to the section
(s) of the standard under review and include sufficient detail so as to enable the reader to understand the commenter's position,
concerns and suggested alternative language, if appropriate. Please note that the ANSI Executive Standards Council (ExSC) has
determined that an ASD has the right to require that interested parties submit public review comments electronically, in accordance
with the developer’s procedures.
Ordering Instructions for "Call-for-Comment" Listings
1. Order from the organization indicated for the specific proposal.
2. Use the full identification in your order, including the BSR prefix; for example, Electric Fuses BSR/SAE J554.
3. Include remittance with all orders.
4. BSR proposals will not be available after the deadline of call for comment.
Comments should be addressed to the organization indicated, with a copy to the Board of Standards Review, American National
Standards Institute, 25 West 43rd Street, New York, NY 10036. e-mail: psa@ansi.org
* Standard for consumer products
Comment Deadline: August 7, 2022

ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.)
180 Technology Parkway, Peachtree Corners, GA 30092 | cking@ashrae.org, www.ashrae.org
Addenda
BSR/ASHRAE Addendum a to BSR/ASHRAE Standard 145.1-202x, Laboratory Test Method for Assessing the
Performance of Gas-Phase Air Cleaning Systems: Loose Granular Media (addenda to ANSI/ASHRAE Standard
145.1-2015)
This addendum makes changes to several definitions to harmonize them as much as possible with definitions in
Standard 145.2 (as amended by RP-1838) and Chapter 47 in the Applications Handbook.
Click here to view these changes in full
Send comments (copy psa@ansi.org) to: http://www.ashrae.org/standards-research--technology/public-review-
drafts


180 Technology Parkway, Peachtree Corners, GA 30092 | tloxley@ashrae.org, www.ashrae.org
Addenda
BSR/ASHRAE/ICC/IES/USGBC Addendum t to BSR/ASHRAE/ICC/IES/USGBC Standard 189.1-202x, Standard for
the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to
ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1-2020)
This addendum addresses the energy use of indoor agriculture grow spaces in the three ways. First, the proposal
adds additional lighting efficacy and renewable energy requirements to these facilities. Second, this proposal
increases the efficacy requirement to 2.1 PPE. Third, this proposal will also require lighting from these be
provided by renewable energy to account for increased carbon emissions from indoor grow spaces and
greenhouse facilities compared with growing crops outdoors. This proposal also addresses the energy use of
HVAC systems in indoor grow facilities and adds a compliance option so the cost of construction will not increase.
Send comments (copy psa@ansi.org) to: https://www.ashrae.org/technical-resources/standards-and-
guidelines/public-review-drafts

Addenda
BSR/ASHRAE/ICC/IES/USGBC Addendum x to BSR/ASHRAE/ICC/IES/USGBC Standard 189.1-202x, Standard for
This addendum adds a normative reference in Section 11 to Chapter 3, the occupancy classification and use
chapter of the International Building Code© (IBC). Standard 189.1 already references IBC occupancy groups in
Section 5.3.7.3 and has other sections that are applicable to specific building uses. Some of these existing
sections, and potentially future provisions, may benefit from the ability to make a reference to the defined
occupancy classifications of the IBC. This change will also enhance the correlation between the International
Green Construction Code and the other International Codes, most of which reference the IBC for occupancy
classification.

Addenda
BSR/ASHRAE/ICC/IES/USGBC Addendum y to BSR/ASHRAE/ICC/IES/USGBC Standard 189.1-202x, Standard for
This addendum adds language to section 8.3.1.7 to add a prohibition on vaping and required signage for any
designated smoking areas.


180 Technology Parkway, Peachtree Corners, GA 30092 | etoto@ashrae.org, www.ashrae.org
Addenda
BSR/ASHRAE/IES Addendum bp to BSR/ASHRAE/IES Standard 90.1-202x, Energy Standard for Buildings Except
Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/IES Standard 90.1-2019)
This addendum would remove a previous exception in the control requirements for captive key cards used in
hotel guestrooms since this technology is not commonly used and is often bypassed.

Addenda
BSR/ASHRAE/IES Addendum cv to BSR/ASHRAE/IES Standard 90.1-202x, Energy Standard for Buildings Except
This addendum is in response to a revision to AHRI 920 (2020 edition + Addendum l) in which new metrics
(ISMRE2 and ISCOP2) are being used to evaluate the efficiency of dehumidification and heating. The minimum
efficiency requirements for 90.1 and DOE-covered DX-DOAS equipment have been modified for consistency with
the new test procedure.

Addenda
BSR/ASHRAE/IES Addendum cw to BSR/ASHRAE/IES Standard 90.1-202x, Energy Standard for Buildings Except
This addendum proposes an additional lighting power allowance that can be used to achieve exit access stairway
illuminance levels in accordance with the 2021 IBC.


NSF (NSF International)
789 N. Dixboro Road, Ann Arbor, MI 48105-9723 | jsnider@nsf.org, www.nsf.org
Revision
BSR/NSF 41-202x (i11r2), Non-liquid Saturated Treatment Systems (revision of ANSI/NSF 41-2018)
This wastewater standard contains minimum requirements for treatment systems that do not utilize a liquid
saturated media as a primary means of storing or treating human excreta or human excreta mixed with other
organic household materials. It addresses treatment systems that treat both solid and liquid waste, as well as
those that only treat solid waste. Management methods for the end products of these systems are not addressed
by this Standard.
Send comments (copy psa@ansi.org) to: jsnider@nsf.org

Revision
BSR/NSF 350-202x (i72r1), Onsite Residential and Commercial, Water Reuse Treatment Systems (revision of
ANSI/NSF 350-2020)
This Standard contains minimum requirements for onsite residential and commercial greywater treatment
systems. Systems may include greywater reuse treatment systems having a rated treatment capacity up to 5,678
L/d (1,500 gal/d); or Commercial greywater reuse treatment systems: This applies to onsite commercial reuse
treatment systems that treat combined commercial facility greywater with capacities exceeding 5,678 L/d (1,500
gal/d) and commercial facility laundry water only of any capacity. Management methods and end uses
appropriate for the treated effluent discharged from greywater residential and commercial treatment systems
meeting this Standard are limited to subsurface discharge to the environment only.
Send comments (copy psa@ansi.org) to: jsnider@nsf.org
UL (Underwriters Laboratories)
333 Pfingsten Road, Northbrook, IL 60062-2096 | alan.t.mcgrath@ul.org, https://ul.org/
Revision
BSR/UL 428B-202X, Standard for Electrically Operated Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel
Blends with Nominal Biodiesel Concentrations Up To 20 Percent (B20), Kerosene, and Fuel Oil (revision of
ANSI/UL 428B-2021)
(1) ANSI approval of the revisions covering the (a) deletion of redundant requirements in UL 428B, and (b)
Operations Test.
Send comments (copy psa@ansi.org) to: alan.t.mcgrath@ul.org


333 Pfingsten Road, Northbrook, IL 60062-2096 | Amy.K.Walker@ul.org, https://ul.org/
Revision
BSR/UL 705-202x, Standard for Safety for Power Ventilators (revision of ANSI/UL 705-2021)
This proposal for UL 705 covers: (2) Update internal wiring for hazardous voltage; and (3) Addition of solid state
speed controller test requirements
Send comments (copy psa@ansi.org) to: Follow the instructions in the following website to enter comments into
the CSDS Work Area: "https://csds.ul.com/Home/ProposalsDefault.aspx."
47173 Benicia Street, Fremont, CA 94538 | Linda.L.Phinney@ul.org, https://ul.org/
Revision
BSR/UL 1581-202x, Standard for Reference Standard for Electrical Wires, Cables, and Flexible Cords (July 8,
2022) (revision of ANSI/UL 1581-2020)
This proposal covers: (1) Editorial change to 11.1 and addition of copper-clad Aluminum, New Section 12.
the CSDS Work Area: https://csds.ul.com/Home/ProposalsDefault.aspx.
171 Nepean Street, Suite 400, Ottawa, ON K2P 0B4 Canada | kevin.hf.wu@ul.org, https://ul.org/
Revision
BSR/UL 2034-202x, Standard for Safety for Single and Multiple Station Carbon Monoxide Alarms (revision of
ANSI/UL 2034-2022)
This proposal covers:(1) New Commercial Vehicles Definition; (6) New Velocity Sensitivity Test.
the CSDS Work Area: https://csds.ul.com/Home/ProposalsDefault.aspx
12 Laboratory Drive, Research Triangle Park, NC 27709-3995 | patricia.a.sena@ul.org, https://ul.org/
Revision
BSR/UL 2594-202X, Standard for Safety for Electric Vehicle Supply Equipment (revision of ANSI/UL 2594-2016)
(1) The Proposed Third Edition of the Standard for Electric Vehicle Supply Equipment, ANCE J- 677/CSA 280/UL
2594, including the following revisions: (a) Removal of requirement to fasten in place devices rated over 125 V;
(b) Increase voltage to 1000 V input, (c) Revisions due to withdrawal of UL 2744; and (d) Location of interrupting
device for personnel protection systems in EVSE in accordance with the NEC.
the CSDS Work Area “https://csds.ul.com/Home/ProposalsDefault.aspx


WMA (World Millwork Alliance)
10047 Robert Trent Jones Parkway, New Port Richey, FL 34655 | jferris@worldmillworkalliance.com, http:
//worldmillworkalliance.com
Revision
BSR/WMA 100-202x, Standard Method of Determining Structural Performance Ratings of Side-Hinged Exterior
Door Systems and Procedures for Component Substitution (revision of ANSI/WMA 100-2018)
Additional revisions regarding updated reference standards have been incorporated into the ANSI/WMA 100
-2018 by WMA's Industry Standards and Certification Committee (ISCC) from comments received during the WMA
100 Consensus Body balloting and the public comment period in May/June. The WMA 100 provides a method to
obtain a structural design pressure rating for a side-hinged exterior door system (SHEDS) using the ASTM E330
test method. Once a rating is obtained, the standard defines methods for qualifying door system components for
substitution in the rated system. Slab stiffness testing is used and outlined in this standard as a means to qualify
components.
Send comments (copy psa@ansi.org) to: Jessica Ferris, Director of Codes and Standards
jferris@worldmillworkalliance.com

ANS (American Nuclear Society)
555 North Kensington Avenue, La Grange Park, IL 60526 | kmurdoch@ans.org, www.ans.org
Reaffirmation
BSR/ANS 8.5-1996 (R202x), Use of Borosilicate-Glass Raschig Rings as a Neutron Absorber in Solutions of Fissile
Material (reaffirmation of ANSI/ANS 8.5-1996 (R2017))
This standard provides guidance for the use of borosilicate-glass Raschig rings as a neutron absorber for
criticality control in ring-packed vessels containing solutions of 235U, 239Pu, or 233U. The chemical and
physical environment, properties of the rings, and packed vessels, maintenance inspection procedures, and
operating guidelines are specified.
Single copy price: $70.00
Obtain an electronic copy from: orders@ans.org
Order from: orders@ans.org
Send comments (copy psa@ansi.org) to: pschroeder@ans.org


Reaffirmation
BSR/ANS 8.6-1983 (R202x), Safety in Conducting Subcritical Neutron-Multiplication Measurements in Situ
(reaffirmation of ANSI/ANS 8.6-1983 (R2017))
This standard provides safety guidance for conducting subcritical neutron-multiplication measurements where
physical protection of personnel against the consequences of a criticality accident is not provided. The objectives
of in situ measurements are either to confirm an adequate safety margin or to improve an estimate of such a
margin. The first objective may constitute a test of the criticality safety of a design that is based on calculations.
The second may effect improved operating conditions by reducing the uncertainty of safety margins and providing
guidance to new designs.
Send comments (copy psa@ansi.org) to: pschroeder@ans.org

Revision
BSR/ANS 8.3-202x, Criticality Accident Alarm System (revision of ANSI/ANS 8.3-1997 (R2017))
This standard is applicable to operations with fissionable materials in which inadvertent criticality could occur
leading to an excessive radiation dose to personnel. This standard is not applicable to nuclear reactors or critical
experiments.
Send comments (copy psa@ansi.org) to: Patricia Schroeder; pschroeder@ans.org
ARESCA (American Renewable Energy Standards and Certification Association)

256 Farrell Farm Road, Norwich, VT 05055 | secretary@aresca.us, www.aresca.us
National Adoption
BSR/ARESCA 61400-12-4-202x, Wind energy generation systems - Part 12-4: Numerical site calibration for
power performance testing of wind turbines (identical national adoption of IEC TR 61400-12-4:2020)
IEC TR 61400-12-4:2020 summarizes the current state of the art in numerical flow modelling, existing guidelines
and past benchmarking experience in numerical model validation and verification. Based on the work
undertaken, the document identifies the important technical aspects for using flow simulation over terrain for
wind application as well as the existing open issues including recommendations for further validation through
benchmarking tests.
Single copy price: Free
Obtain an electronic copy from: secretary@aresca.us
Order from: ARESCA
Send comments (copy psa@ansi.org) to: secretary@aresca.us


National Adoption
BSR/ARESCA 61400-15-1-202x, Wind energy generation systems - Part 15-1: Site suitability input conditions for
wind power plants (identical national adoption of IEC 61400-15-1:2022)
The scope of this standard is the assessment and reporting of site-specific wind conditions. This includes the
following aspects: (1) all measurement, analysis and evaluation steps including data analysis, modeling, loss
assessment and net energy production estimation for wind power stations; (2) all documentation requirements to
make the results traceable to national standards; (3) all reporting requirements; (4) a standardised approach to
the uncertainty assessment of an assessment of site-specific wind conditions. The expression ”site-specific
conditions” as used in the context of this document is defined as the set of meteorological site conditions which
are relevant for the design, operation and structural integrity of a wind turbine (WT). The meteorological site
conditions addressed in this document relate to wind conditions, where parameters like wind speed, wind
direction, air density, or air temperature are included to the extent that they affect the wind flow.
Order from: ARESCA

National Adoption
BSR/ARESCA 61400-25-1-202x, Wind energy generation systems - Part 25-1: Communications for monitoring
and control of wind power plants - Overall description of principles and models (identical national adoption of IEC
61400-25-1:2017)
IEC 61400-25-1:2017 gives an overall description of the principles and models used in the IEC 6140025 series,
which is designed for a communication environment supported by a client-server model. Three areas are defined,
that are modelled separately to ensure the scalability of implementations: wind power plant information models,
information exchange model, and mapping of these two models to a standard communication profile. This new
edition includes the following significant technical changes with respect to the previous edition: general
harmonization of text and overview models with the other parts of the IEC 6140025 series, harmonization of
definitions in other related standards.

Order from: ARESCA


National Adoption
and control of wind power plants - Information models (identical national adoption of IEC 61400-25-2:2015)
IEC 61400-25-2:2015 specifies the information model of devices and functions related to wind power plant
applications. In particular, it specifies the compatible logical node names, and data names for communication
between wind power plant components. This includes the relationship between logical devices, logical nodes, and
data. The names defined in the IEC 61400-25 series are used to build the hierarchical object references applied
for communicating with components in wind power plants.
Order from: ARESCA

National Adoption
and control of wind power plants - Information exchange models (identical national adoption of IEC 61400-25
-3:2015)
IEC 61400-25-3:2015 specifies an abstract communication service interface describing the information
exchange between a client and a server for:
- data access and retrieval;
- device control;
- event reporting and logging;
- self-description of devices (device data dictionary); and
- data typing and discovery of data types.
Order from: ARESCA


National Adoption
and control of wind power plants - Mapping to communication profile (identical national adoption of IEC 61400
-25-4:2016)
IEC 61400-25-4:2016 specifies the specific mappings to protocol stacks encoding the messages required for the
information exchange between a client and a remote server for: data access and retrieval, device control, event
reporting and logging, publisher/subscriber, self-description of devices (device data dictionary), data typing and
discovery of data types. The mappings specified in this part of IEC 61400-25 comprise:
- a mapping to SOAP-based web services;
- a mapping to OPC/XML-DA;
- a mapping to IEC 61850-8-1 MMS;
- a mapping to IEC 60870-5-104; and
- a mapping to DNP3.
Order from: ARESCA

National Adoption
and control of wind power plants - Compliance testing (identical national adoption of IEC 61400-25-5:2017)
IEC 61400-25-5:2017 specifies standard techniques for testing of compliance of implementations, as well as
specific measurement techniques to be applied when declaring performance parameters. The use of these
techniques will enhance the ability of users to purchase systems that integrate easily, operate correctly, and
support the applications as intended. This part of IEC 61400-25 defines: the methods and abstract test cases for
compliance testing of server and client devices used in wind power plants; the metrics to be measured in said
devices according to the communication requirements specified in IEC 61400-25 (all parts).
Order from: ARESCA


National Adoption
and control of wind power plants - Logical node classes and data classes for condition monitoring (identical
national adoption of IEC 61400-25-6:2016)
IEC 61400-25-6:2016 specifies the information models related to condition monitoring for wind power plants and
the information exchange of data values related to these models. This standard is to be used with other
standards of the IEC 61400-25 series.
Order from: ARESCA

National Adoption
BSR/ARESCA 61400-27-1-202x, Wind energy generation systems - Part 27-1: Electrical simulation models -
Generic models (identical national adoption of IEC 61400-27-1:2020)
IEC 61400-27-1:2020 defines standard electrical simulation models for wind turbines and wind power plants.
The specified models are time domain positive sequence simulation models, intended to be used in power
system and grid stability analyses. The models are applicable for dynamic simulations of short term stability in
power systems. This document defines the generic terms and parameters for the electrical simulation models.
This document specifies electrical simulation models for the generic wind power plant topologies/configurations
currently on the market. The wind power plant models include wind turbines, wind power plant control and
auxiliary equipment. The wind power plant models are described in a modular way which can be applied for future
wind power plant concepts and with different wind turbine concepts.
Order from: ARESCA


National Adoption
BSR/ARESCA 61400-27-2-202x, Wind energy generation systems - Part 27-2: Electrical simulation models -
Model validation (identical national adoption of IEC 61400-27-2:2020)
IEC 61400-27-2:2020 specifies procedures for validation of electrical simulation models for wind turbines and
wind power plants, intended to be used in power system and grid stability analyses. The validation procedures are
based on the tests specified in IEC 61400-21 (all parts). The validation procedures are applicable to the generic
models specified in IEC 61400-27-1 and to other fundamental frequency wind power plant models and wind
turbine models. The validation procedures for wind turbine models focus on fault ride-through capability and
control performance. The fault ride-through capability includes response to balanced and unbalanced voltage
dips as well as voltage swells. The control performance includes active power control, frequency control, synthetic
inertia control and reactive power control. The validation procedures for wind turbine models refer to the tests
specified in IEC 61400-21-1. The validation procedures for wind turbine models refer to the wind turbine
terminals.
Order from: ARESCA

National Adoption
BSR/ARESCA 61400-50-3-202x, Wind energy generation systems - Part 50-3: Use of nacelle-mounted lidars for
wind measurements (identical national adoption of IEC 61400-50-3:2022)
IEC 61400-50-3:2022 describes procedures and methods that ensure that wind measurements using nacelle-
mounted wind lidars are carried out and reported consistently and according to best practice. This document
does not prescribe the purpose or use case of the wind measurements. However, as this document forms part of
the IEC 61400 series of standards, it is anticipated that the wind measurements will be used in relation to some
form of wind energy test or resource assessment. The scope of this document is limited to forward-looking
nacelle-mounted wind lidars (i.e., the measurement volume is located upstream of the turbine rotor). This
document aims to describe wind measurements using nacelle-mounted wind lidar with sufficient quality for the
use case of power performance testing (according to IEC 61400-12-1:2017).
Order from: ARESCA


National Adoption
and control of wind power plants - Configuration description language (identical national adoption of IEC TS
61400-25-71:2019)
This document describes how to extend the IEC 61400-25 series with the IEC 618506 Substation Configuration
description Language (SCL) file format for describing communication-related Intelligent Electronic Device (IED)
configurations of a wind turbine, wind power plant controller, meteorological mast, etc. The extension of SCL to
the wind domain is intended to simplify integration of wind power plant equipment for clients, as well as their
integration to the electrical system. The adoption of SCL allows formalised tool-based exchange of IED
parameters, communication system configurations, switch yard (function) structures, as well as description of the
relations between them.
Order from: ARESCA
ASSP (Safety) (American Society of Safety Professionals)

520 N. Northwest Highway, Park Ridge, IL 60068 | LBauerschmidt@assp.org, www.assp.org
Revision
BSR/ASSP Z359.4-202x, Safety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and
Components (revision and redesignation of ANSI/ASSE Z359.4-2013)
This standard establishes requirements for the performance, design, marking, qualification, instruction, training,
use, maintenance and removal from service of connectors, harnesses, lanyards, anchorage connectors,
winches/hoists, descent control devices, rope tackle blocks and self-retracting lanyards with integral rescue
capability comprising rescue systems, utilized in pre-planned self-rescue and assisted-rescue applications for one
to two persons.
Obtain an electronic copy from: LBauerschmidt@assp.org
Order from: LBauerschmidt@assp.org
Send comments (copy psa@ansi.org) to: Same

100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 | accreditation@astm.org, www.astm.org
New Standard
BSR/ASTM D8428-202x, Standard Guide for Establishing Analyst Competence to Perform a Test Method (new
standard)
https://www.astm.org/ansi-review
Obtain an electronic copy from: accreditation@astm.org
Order from: accreditation@astm.org


AWS (American Welding Society)
8669 NW 36th Street, Suite 130, Miami, FL 33166-6672 | kbulger@aws.org, www.aws.org
Revision
BSR/AWS D14.0/D14.0M-202x, Machinery and Equipment Welding Specification (revision, redesignation and
consolidation of ANSI/AWS D14.3/D14.3M-2018, ANSI/AWS D14.4/D14.4M-2019, ANSI/AWS D14.5/D14.5M
-2009, and AWS D14.1/D14.1M)
This specification establishes design, manufacture, quality, inspection, and repair requirements for carbon and
low-alloy steel welded connections in machinery and equipment. It addresses topics including weld joint design,
workmanship, quality acceptance criteria, non-destructive inspection methods (visual, radiographic, ultrasonic,
magnetic particle, and liquid penetrant), repair of weld defects, and post-weld heat treatment.
Single copy price: $134.00 (Non-Members)/$100.00 (AWS Members)
Obtain an electronic copy from: kbulger@aws.org
Order from: Kevin Bulger; kbulger@aws.org
CGA (Compressed Gas Association)

8484 Westpark Drive, Suite 220, McLean, VA 22102 | tdeary@cganet.com, www.cganet.com
New Standard
BSR/CGA G-5-202x, Hydrogen (new standard)
This publication provides information on the physical and chemical properties of hydrogen and proper handling
and use. It is intended to provide background information for personnel involved in the manufacture, distribution,
and use of hydrogen.
Obtain an electronic copy from: tdeary@cganet.com
Order from: tdeary@cganet.com
CSA (CSA America Standards Inc.)

8501 East Pleasant Valley Road, Cleveland, OH 44131-5575 | ansi.contact@csagroup.org, www.csagroup.org
Revision
BSR/CSA HGV 3.1-202x, Fuel system components for compressed hydrogen gas powered vehicles (revision of
ANSI/CSA HGV 3.1-2014 (R2019))
This standard establishes requirements for newly produced compressed hydrogen gas fuel system components,
intended for use on hydrogen-gas-powered vehicles including: check valves, manual valves, manual container
valves, automatic valves and automatic container valves, hydrogen injectors, pressure and temperature sensors
and pressure gauges, pressure regulators, pressure relief valves, pressure relief devices, excess flow valves, gas-
tight housing and ventilation passages, stainless steel rigid fuel lines, flexible fuel lines, hoses and assemblies,
filter assemblies, fittings, non-metallic low-pressure rigid fuel lines and discharge line closures.
Obtain an electronic copy from: ANSI.contact@csagroup.org
Send comments (copy psa@ansi.org) to: ANSI.contact@csagroup.org


CTA (Consumer Technology Association)
1919 S. Eads Street, Arlington, VA 22202 | cakers@cta.tech, www.cta.tech
New Standard
BSR/CTA 2106-202x, Characteristics and Requirements for Mental Health Technology Solutions (new standard)
This document will provide guidelines and implementation for consumer technologies related to the monitoring
treatment, and diagnosis of mental health and mental wellness.
Obtain an electronic copy from: standards@cta.tech
Order from: standards@cta.tech
Send comments (copy psa@ansi.org) to: CAkers@cta.tech

Revision
BSR/CTA/NSF-2052.1-A-202x, Definitions and Characteristics for Wearable Sleep Monitors (revision and
redesignation of ANSI/CTA/NSF-2052.1)
This standard specifies terms and definitions for consumer sleep-wearable devices used to describe sleep and
indicates the functionality necessary to measure the characteristics of sleep.
Obtain an electronic copy from: standards@cta.tech
Order from: standards@cta.tech
Send comments (copy psa@ansi.org) to: CAkers@cta.tech
EOS/ESD (ESD Association, Inc.)

218 W. Court Street, Rome, NY 13440 | jkirk@esda.org, www.esda.org
Revision
BSR/EOS ESDA/JEDEC JS-001-202x, ESDA/JEDEC Joint Standard for Electrostatic Discharge Sensitivity Testing -
Human Body Model (HBM) - Component Level (revision of ANSI/ESDA/JEDEC JS-001-2017)
This standard establishes the procedure for testing, evaluating, and classifying components and microcircuits
according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined human body
model (HBM) electrostatic discharge (ESD). For the purpose of this standard, the term “component” includes
packaged device, unpackaged singulated bare die, and die which are still part of a wafer.
Single copy price: $145.00 (List)/$115.00 (EOS Members) [Hard cover]; $135.00 (List)/$105.00 (EOS Members)
[Soft cover]
Obtain an electronic copy from: cearl@esda.org
Order from: Christina Earl; cearl@esda.org


271 Cadman Plaza, P.O. Box 23200, Brooklyn, NY 11202-3200 | standards@esta.org, www.esta.org
New Standard
BSR/E1.71-202x, Powered Curtain Machines (new standard)
This standard establishes requirements for the design, manufacture, installation, inspection, and maintenance of
machines intended for the movement of curtains in entertainment environments. Curtains operated by these
machines may be for scenery, performance, presentation, acoustical dampening, museum exhibits, retail
displays, and theatrical production. Specifically included are the machine control systems, mechanical
construction, and powertrain components.
Obtain an electronic copy from: https://tsp.esta.org/tsp/documents/public_review_docs.php
Order from: Richard Nix; standards@esta.org

New Standard
BSR/E1.72-202x, Powered Floor Machinery (new standard)
This standard establishes requirements for the design, manufacture, installation, inspection, operation and
maintenance of powered Stage Floor Machinery for performance, presentation, and theatrical production. It
covers the machinery, mechanisms, machine safety devices, and control interface requirements for equipment
and systems, installed permanently or temporarily. This standard does not apply to the structure to which the
machine is attached nor to the finished floor or subflooring construction. Machines that produce substantially
vertical movement are also excluded from this standard.

Reaffirmation
BSR E1.9-2007 (R202x), Reporting Photometric Performance Data for Luminaires Used in Entertainment
(reaffirmation of ANSI E1.9-2007 (R2017))
ANSI E1.9 defines the minimum photometric data to be presented on documents purporting to accurately
describe the photometric performance of stage and studio luminaires used in the live entertainment and
performance industries.


Reaffirmation
BSR E1.25-2012 (R202x), Recommended Basic Conditions for Measuring the Photometric Output of Stage and
Studio Luminaires by Measuring Illumination Levels Produced on a Planar Surface (reaffirmation of ANSI E1.25
-2012 (R2017))
ANSI E1.25 describes the basic conditions for measuring the photometric output of a stage or studio luminaire by
testing methods that measure the illumination levels produced by the luminaire on a planar surface. These
testing methods include, but are not limited to, measurements taken by digital cameras or hand-held meters. This
standard is not intended to give guidance on testing conditions for testing methods that use goniophotometers.

Reaffirmation
BSR E1.35-2013 (R202x), Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended
for Entertainment Use (reaffirmation of ANSI E1.35-2013 (R2018))
ANSI E1.35 describes a method for measuring stage and studio luminaire lens quality with particular emphasis
on contrast and perceived projected image quality (sharpness). It also offers a way for presenting these results on
a datasheet in a format that is readily understood by a typical end-user and that allows the end-user to directly
compare lenses in a meaningful way. Without this standard, there is no way to describe how clearly a stage
lighting instrument projects an image, other than by showing a person with the actual instrument and gobo.

Revision
BSR/E1.28-202x, Guidance on planning followspot positions in places of public assembly (revision of ANSI E1.28
-2011 (R2021))
ANSI E1.28 offers guidance on the planning of permanent followspot positions. It is being revised to add
guidance on glass panes when used as part of a followspot position.


IEEE (ASC C63) (Institute of Electrical and Electronics Engineers)
445 Hoes Lane, Piscataway, NJ 08854 | J.Santulli@ieee.org, www.ieee.org
Revision
BSR C63.10 Corrigendum-202x, Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices
(revision of ANSI C63.10-2020)
Corrections for the following: (1) Harmonize requirements between clauses 6.2.2 and 6.2.3.2.2 to remove the
requirement to calibrate the LISN with an extension cable as currently required in 6.2.2 and then later removing
the requirement in 6.2.3.2.2. (2) Correct formula for UWB Center Frequency.
Obtain an electronic copy from: j.santulli@ieee.org
Send comments (copy psa@ansi.org) to: j.santulli@ieee.org

1300 North 17th Street, Suite 900, Rosslyn, VA 22209 | Pau_orr@nema.org, www.nema.org
Revision
BSR C119.4-202x, Electric Connectors - Connectors for Use between Aluminum-to-Aluminum and Aluminum-to-
Copper Conductors Designed for Normal Operation at or Below 93°C and Copper-to-Copper Conductors Designed
for Normal Operation at or Below 100°C (revision of ANSI C119.4-2016)
This standard covers connectors used for making electrical connections between aluminum-to-aluminum or
aluminum-to-copper or copper-to-copper conductors used on distribution and transmission lines for electric
utilities.
Obtain an electronic copy from: pau_orr@nema.org
Order from: www.nema.org
Send comments (copy psa@ansi.org) to: pau_orr@nema.org

1300 North 17th Street, Suite 900, Arlington, VA 22209 | Khaled.Masri@nema.org, www.nema.org
Revision
BSR NEMA WC 74/ICEA S-93-639-202x, 5-46 kV Shielded Power Cable for Use in the Transmission and
Distribution of Electric Energy (revision of ANSI/NEMA WC 74/ICEA S-93-639-2017)
This standard applies to materials, constructions, and testing of 5,000 volt to 46,000 volt shielded crosslinked
polyethylene, and ethylene propylene rubber insulated wires and cables that are used for the transmission and
distribution of electrical energy for normal conditions of installation and service, either indoors, outdoors, aerial,
underground, or submarine.
Obtain an electronic copy from: communication@nema.org
Order from: khaled.masri@nema.org


NEMA (ASC GR) (National Electrical Manufacturers Association)
1300 North 17th Street, Suite 900, Rosslyn, VA 22209 | Pau_orr@nema.org, www.nema.org
New Standard
BSR/NEMA GR 1-202x, Ground Rod Electrodes and Ground Rod Electrode Couplings (new standard)
This standards publication applies to ground rod electrodes and ground rod electrode couplings that function in
accordance with the National Electrical Code (NFPA 70) and/or the National Electrical Safety Code (ANSI C2).
Included are materials, construction, and performance of copper-bonded ground rod electrodes, zinc-coated
ground rod electrodes, and stainless steel ground rod electrodes. This standards publication also includes
information for electrode products that have been successfully used for many years but are not defined within the
National Electrical Code or the National Electrical Safety Code. The items described in this standards
publication are defined in Section 1.
Obtain an electronic copy from: pau_orr@nema.org
Order from: www.nema.org
Send comments (copy psa@ansi.org) to: pauorr@nema.org

789 N. Dixboro Road, Ann Arbor, MI 48105-9723 | aburr@nsf.org, www.nsf.org
Revision
BSR/NSF 332-202x (i9r3.1), Sustainability Assessment for Resilient Floor Coverings (revision of ANSI/NSF 332
-2015)
This sustainability standard establishes a consistent approach to the evaluation and determination of
environmentally preferable and sustainable resilient floor coverings. The Standard includes relevant criteria
across the product(s) life cycle from raw material extraction through manufacturing, use, and end-of-life
management. As used in this Standard, “resilient floor coverings” includes, but is not limited to, vinyl tile, vinyl
composition tile, sheet vinyl, rubber, polymeric, and linoleum flooring products in which the wearing surface is
non-textile. Also included are flooring accessories such as wall base, moldings, and stair treads.
Obtain an electronic copy from: https://standards.nsf.org/apps/group_public/download.php/64288/332i9r3.1%
20-%20Full%20Revision%20-%20JC%20Memo%20%20%26%20ballot.pdf
Send comments (copy psa@ansi.org) to: aburr@nsf.org
333 Pfingsten Road, Northbrook, IL 60062-2096 | Lisette.delgado@ul.org, https://ul.org/
Reaffirmation
BSR/UL 486G-2018 (R202x), Standard for Sealed Twist-On Connecting Devices (reaffirmation of ANSI/UL 486G
-2018)
Reaffirmation of UL 486G which covers Sealed Twist-On Connecting Devices.
Obtain an electronic copy from: https://csds.ul.com/Home/ProposalsDefault.aspx
Order from: https://www.shopulstandards.com/
Send comments (copy psa@ansi.org) to: Follow the instructions at the following website to enter comments into


333 Pfingsten Road, Northbrook, IL 60062 | megan.monsen@ul.org, https://ul.org/
Revision
BSR/UL 1998-202x, Standard for Safety for Software in Programmable Components (revision of ANSI/UL 1998
-2018)
The proposed revisions to UL 1998 include: (1) Removal of limitation to non-networked software, (2) Update of
definitions, (3) Clarification of risk analysis scope and requirements, (4) Clarification of software development
process requirements, (5) Clarification of tool requirements, (6) Clarification of software design requirements, (7)
Clarification of measures to address systematic microelectronic hardware failures, and (8) Clarification of change
management and document control requirements.
the CSDS Work "https://csds.ul.com/Home/ProposalsDefault.aspx."
333 Pfingsten Road, Northbrook, IL 60062-2096 | Susan.P.Malohn@ul.org, https://ul.org/
Revision
BSR/UL 61730-2-202x, Standard for Safety for Photovoltaic (PV) Module Safety Qualification - Part 2:
Requirements for Testing (revision of ANSI/UL 61730-2-2020)
(1) Update of IEC TS 62915 References to UL 62915; (2) Correction of Clause DVA.1 to correlate with the intent
of Clause DVA.3; (3) Change Fire Type Glass Description in Table 10.17DV.4.6.1 to not Overlap; (4) New Fire Type
Additions 35 – 40 in Fire Type Testing, Section 10.17DV.4.
the CSDS Work Area: "https://csds.ul.com/Home/ProposalsDefault.aspx."


ULSE (UL Standards & Engagement)
47173 Benicia Street, Fremont, CA 94538 | Marcia.M.Kawate@ul.org, https://ul.org/
Reaffirmation
BSR/UL 1261-2017 (R202x), Standard for Safety for Electric Water Heaters for Pools and Tubs (reaffirmation of
ANSI/UL 1261-2017)
These requirements cover permanently installed electric water heaters, rated 600 volts or less, for heating the
water supplied through plumbing to separately heated public or private pools or tubs, in which swimming, wading,
bathing, or partial or total immersion of persons, may be involved. Equipment covered may or may not be
intended for use with external water circulating equipment, and is intended for installation in accordance with the
National Electrical Code, NFPA 70.
the CSDS Work Area “https://csds.ul.com/Home/ProposalsDefault.aspx"
Comment Deadline: September 6, 2022

ASME (American Society of Mechanical Engineers)
Two Park Avenue, M/S 6-2B, New York, NY 10016-5990 | ansibox@asme.org, www.asme.org
New Standard
BSR/ASME PTC 53-202x, Performance Test Code for Mechanical and Thermal Energy Storage Systems (new
standard)
This Performance Test Code defines uniform test procedures and quantifiable test methods for assessing,
determining, and reporting the performance of mechanical or thermal energy storage systems (ESS) across
varying technology platforms. ASME PTC 53 covers mechanical and thermal technologies including compressed
air, flywheels, thermal storage ranging from molten salts to cryogenic liquids, and pumped hydromechanical
energy.
Order from: https://cstools.asme.org/csconnect/PublicReviewPage.cfm
Send comments (copy psa@ansi.org) to: Donnie Alonzo; dalonzo@asme.org


ISANTA (International Staple, Nail and Tool Association)
8735 W. Higgins Road, Suite 300; c/o Association Management Center, Chicago, IL 60631 | jhenry@isanta.org
Revision
BSR/ISANTA SNT-101-202x, Safety Requirements for Portable Compressed-Air-Actuated Fastener Driving Tools
(revision of ANSI SNT-101-2015)
Standard for Power Tools - Safety Requirements for Portable, Compressed-Air-Actuated, Fastener Driving Tools,
ANSI SNT-101-2015, sets forth safety requirements for tool manufacturers, owners, employers (including self-
employed contractors), designers, safety professionals, supervisors, operators, purchasers, users and other
persons concerned with or responsible for the safe design, construction, use, repair, and maintenance of these
tools. The tools are powered by compressed air. The tools drive nails, staples and other fasteners, typically in the
industrial size range. The covered tools are used for fastening applications that generally, but by no means
exclusively, involve wood-to-wood connections as found in commercial and residential building construction
(framing, sheathing, decking, flooring, insulation, finish work, factory-build units and components, and coverings
for walls, ceilings and roofs, etc.); carton closure; and the manufacture of furniture, box-spring assemblies,
containers (boxes, pallets, crating, etc.), cabinets, etc.
Obtain an electronic copy from: A copy of the proposed standard can be downloaded from the technical resources
/ tool safety standards page at www.isanta.org. Or an electronic copy can be requested by emailing Jeff Henry at
jhenry@isanta.org
Order from: A paper copy can be obtained by emailing Jeff Henry at jhenry@isanta.org
Send comments (copy psa@ansi.org) to: All comments should be directed to Jeff Henry at jhenry@isanta.org
ITI (INCITS) (InterNational Committee for Information Technology Standards)

700 K Street NW, Suite 600, Washington, DC 20001 | comments@standards.incits.org, www.incits.org
National Adoption
INCITS/ISO/IEC 9594-1:2020 [202x], Information technology - Open systems interconnection - Part 1: The
Directory: Overview of concepts, models and services (identical national adoption of ISO/IEC 9594-1:2020 and
revision of INCITS/ISO/IEC 9594-1:2017 [2018])
Provides the directory capabilities required by many application layer standards and telecommunication services.
Among the capabilities which it provides are those of "user-friendly naming", whereby objects can be referred to
by names which are suitable for citing by human users (though not all objects need have user-friendly names);
and "name-to-address mapping" which allows the binding between objects and their locations to be dynamic.
Obtain an electronic copy from: http://webstore.ansi.org/
Order from: http://webstore.ansi.org/
Send comments (copy psa@ansi.org) to: comments@standards.incits.org


National Adoption
Directory: Models (identical national adoption of ISO/IEC 9594-2:2020 and revision of INCITS/ISO/IEC 9594
-2:2017 [2018])
Provides a conceptual and terminological framework for the other ITU-T X.500-series Recommendations | parts
of ISO/IEC 9594 which define various aspects of the Directory. The functional and administrative authority
models define ways in which the Directory can be distributed, both functionally and administratively. Generic
Directory System Agent (DSA) and DSA information models and an Operational Framework are also provided to
support Directory distribution.

National Adoption
Directory: Abstract service definition (identical national adoption of ISO/IEC 9594-3:2020 and revision of
INCITS/ISO/IEC 9594-3:2017 [2018])
Defines in an abstract way the externally visible service provided by the Directory. This document does not specify
individual implementations or products.


National Adoption
Directory: Procedures for distributed operation (identical national adoption of ISO/IEC 9594-4:2020 and revision
of INCITS/ISO/IEC 9594-4:2017 [2018])
Specifies the behaviour of DSAs taking part in a distributed directory consisting of multiple Directory systems
agents (DSAs) and/or LDAP servers with at least one DSA. The allowed behaviour has been designed to ensure a
consistent service given a wide distribution of the DIB across a distributed directory. Only the behaviour of DSAs
taking part in a distributed directory is specified. The behaviour of LDAP servers are specified in relevant LDAP
specifications. There are no special requirements on an LDAP server beyond those given by the LDAP
specifications.

National Adoption
Directory: Protocol specifications (identical national adoption of ISO/IEC 9594-5:2020 and revision of
INCITS/ISO/IEC 9594-5:2017 [2018])
Specifies the Directory Access Protocol, the Directory System Protocol, the Directory Information Shadowing
Protocol, and the Directory Operational Binding Management Protocol which fulfil the abstract services specified
in Rec. ITU-T X.511 | ISO/IEC 9594-3, Rec. ITU-T X.518 | ISO/IEC 9594-4, Rec. ITU-T X.525 | ISO/IEC 9594-9,
and Rec. ITU-T X.501 | ISO/IEC 9594-2.

National Adoption
Directory: Selected attribute types (identical national adoption of ISO/IEC 9594-6:2020 and revision of
INCITS/ISO/IEC 9594-6:2017 [2018])
Defines a number of attribute types and matching rules which may be found useful across a range of applications
of the Directory.


National Adoption
Directory: Selected object classes (identical national adoption of ISO/IEC 9594-7:2020 and revision of
INCITS/ISO/IEC 9594-7:2017 [2018])
Defines a number of object classes and name forms which may be found useful across a range of applications of
the Directory. The definition of an object class involves listing a number of attribute types which are relevant to
objects of that class. The definition of a name form involves naming the object class to which it applies and listing
the attributes to be used in forming names for objects of that class. These definitions are used by the
administrative authority which is responsible for the management of the directory information.

National Adoption
Directory: Public-key and attribute certificate frameworks (identical national adoption of ISO/IEC 9594-8:2020
and revision of INCITS/ISO/IEC 9594-8:2017 [2018])
Addresses some of the security requirements in the areas of authentication and other security services through
the provision of a set of frameworks upon which full services can be based. Specifically, this Recommendation |
International Standard defines frameworks for public-key certificates; and attribute certificates.

National Adoption
Directory: Replication (identical national adoption of ISO/IEC 9594-9:2020 and revision of INCITS/ISO/IEC 9594
-9:2017 [2018])
Specifies a shadow service which Directory system agents (DSAs) may use to replicate Directory information. The
service allows Directory information to be replicated among DSAs to improve service to Directory users. The
shadowed information is updated, using the defined protocol, thereby improving the service provided to users of
the Directory.


National Adoption
INCITS/ISO/IEC 9594-11:2020 [202x], Information technology - Open systems interconnection directory - Part
11: Protocol specifications for secure operations (identical national adoption of ISO/IEC 9594-11:2020)
Provides guidance on how to prepare new and old protocols for cryptographic algorithm migration, and defines
auxiliary cryptographic algorithms to be used for migration purposes.

National Adoption
INCITS/ISO/IEC 9594-2:2020/AM1:2021 [202x], Information technology - Open systems interconnection - Part 2:
The Directory: Models - Amendment 1 (identical national adoption of ISO/IEC 9594-2:2020/AM1:2021)
Amendment 1 to ISO/IEC 9594-2:2020.

National Adoption
INCITS/ISO/IEC 9594-8:2020/COR1:2021 [202x], Information technology - Open systems interconnection - Part
8: The Directory: Public-key and attribute certificate frameworks - Technical Corrigendum 1 (identical national
adoption of ISO/IEC 9594-8:2020/COR1:2021)
Technical Corrigendum 1 to ISO/IEC 9594-8:2020.


New Standard
INCITS 550-202x, Information technology - Zoned Block Commands - 2 (ZBC-2) (new standard)
Storage devices are embracing fundamental changes in technology. New devices based on this technology allow
random reading of data that is already written, while requiring writing to occur at specific locations on their media.
The proposed new standard builds on the work accomplished in ZBC to continue and improve support for the new
technology. The following items should be considered for inclusion into the ZBC-2 standard: corrections for
difficulties discovered during the development of first-adopter products based on ZBC; enhanced command and
error handling definitions to support new customer requirements for the technology; and other capabilities that
may fit within the scope of this project.
Obtain an electronic copy from: https://standards.incits.org/apps/group_public/document.php?
document_id=142540&wg_abbrev=eb
Order from: https://standards.incits.org/apps/group_public/document.php?

New Standard
INCITS 554-202x, Information technology - SAS Protocol Layer - 5 (SPL-5) (new standard)
Specifies the next generation of the protocol portion of the current Serial Attached SCSI. It follows SPL-4, SPL-3,
SPL-2, SPL, and the protocol portions of SAS-2, and SAS-1.1. The following items should be considered for
inclusion in SAS Protocol Layer - 5: enhancements to the protocol; corrections and clarifications; and other
capabilities that may fit within the scope of this project.
Obtain an electronic copy from: https://standards.incits.org/apps/group_public/document.php?
Order from: https://standards.incits.org/apps/group_public/document.php?


333 Pfingsten Road, Northbrook, IL 60062 | isabella.brodzinski@ul.org, https://ul.org/
Reaffirmation
BSR/UL 2115-2017 (R202x), Standard for Safety for Processed Solid-Fuel Firelogs and Firestarters (reaffirmation
of ANSI/UL 2115-2017)
These requirements cover processed solid-fuel firelogs that are intended for use as an alternative fuel in factory-
built fireplaces and masonry fireplaces. These requirements also cover processed solid-fuel fire starters, with a
volatile fuel content not exceeding 75% of the total fuel content, intended for use in factory-built fireplaces, solid-
fuel burning appliances, fireplace inserts and masonry fireplaces.
Send comments (copy psa@ansi.org) to: Isabella Brodzinski, isabella.brodzinski@ul.org
12 Laboratory Drive, Research Triangle Park, NC 27709-3995 | Jonette.A.Herman@ul.org, https://ul.org/
Revision
BSR/UL 2743-202x, Standard for Portable Power Packs (revision of ANSI/UL 2743-2020)
The following changes are proposed: (1) Clarification to definition of hazardous voltage level, (2) Addition of
definition of "portable or moveable", (3) Alignment of requirements for sub-enclosures with UL 746C, (4)
Receptacle output not supplied by AC mains, (5) Increase the vehicle adapter voltage rating, (6) Replacement of
UL 60950-1 with UL 62368-1 for external charger standard, (7) Double insulated products with functional
earthing, (8) Alternative cell standard for Lithium and Lead Acid batteries, (9) Addition of alternative standard for
inverters in the power pack, (10) Addition of mass limitation for stability test, (11) Addition of the induction
output and energy hazard measurement test, (12) Addition of LVLE circuit requirements and test, (13)
Clarification of Leakage Current Test with hazardous voltage circuits, (14) Option of single fault condition in
control circuit besides functional safety evaluation, (15) Clarification of the short circuit resistance for output
short circuit test, (16) Charging current for Overcharging Test, (17) Additional requirements for large energy
storage systems (ESS), (18) Strain relief test for interconnecting cable, (19) Updates to the Impact Test and Drop
Test, (20) Clarification of the compliance criteria for the Rain Test, (21) Power Pack Ampacity Test and booster
ampacity rating marking, (22) Addition of UL 969A requirements for flag labels, (23) Revisions to Markings and
Instructions, (24) Addition of instruction for booster cable connection and disconnection to battery, (25)
Clarification to Annex A as Normative or Informative.
Send comments (copy psa@ansi.org) to: Follow the instructions at the following website to enter comments into


12 Laboratory Drive, Research Triangle Park, NC 27709-3995 | griff.edwards@ul.org, https://ul.org/
Revision
BSR/UL 2901-202x, Standard for Antifreeze Solutions for Use in Fire Sprinkler Systems (July 8, 2022) (revision of
ANSI/UL 2901-2019)
This proposal covers: (1) Revision to pipe size required for compatibility testing.
the CSDS Work Area: https://csds.ul.com/Home/ProposalsDefault.aspx.
Project Withdrawn
In accordance with clause 4.2.1.3.3 Discontinuance of a standards project of the ANSI Essential Requirements,
an accredited standards developer may abandon the processing of a proposed new or revised American National
Standard or portion thereof if it has followed its accredited procedures. The following projects have been
withdrawn accordingly:
APCO (Association of Public-Safety Communications Officials-International)

351 N. Williamson Boulevard, Daytona Beach, FL 32114-1112 | apcostandards@apcointl.org, www.apcoIntl.org
BSR/APCO 2.104.1-202x, Application Integration with Public Safety Communications Centers and Public Safety
Responders (new standard)
Inquiries may be directed to Mindy Adams; apcostandards@apcointl.org
Withdrawal of an ANS by ANSI-Accredited Standards Developer

ASQ (American Society for Quality)
600 N Plankinton Avenue, Milwaukee, WI 53203 | espaulding@asq.org, www.asq.org
ANSI/ASQ Z1.11-2011 (R2016), Quality management system standards - Requirements for education
organizations
Direct inquiries to: Elizabeth Spaulding; espaulding@asq.org
12 Laboratory Drive, Research Triangle Park, NC 27709-3995 | Deborah.Prince@ul.org, https://ul.org/
ANSI/ISA 12.10.02 (IEC 61241-0-2006) (R2015), Electrical Apparatus for Use in Zone 20, Zone 21, and Zone 22
Hazardous (Classified) Locations - General Requirements
Direct inquiries to: Deborah Prince; Deborah.Prince@ul.org
ANSI/ISA 60079-10-1-2014, Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas
atmospheres


ANSI/ISA 60079-0 (12.00.01)-2013, Explosive Atmospheres - Part 0: Equipment - General Requirements

ANSI/ISA 60079-11 (12.02.01)-2014, Explosive atmospheres - Part 11: Equipment protection by intrinsic safety
"i"
ANSI/ISA 60079-15 (12.12.02)-2013, Explosive atmospheres - Part 15: Equipment protection by type of
protection "n"
ANSI/ISA 60079-18 (12.23.01)-2012, Explosive atmospheres - Part 18: Equipment protection by encapsulation
"m"
ANSI/ISA 60079-28 (12.21.02)-2013, Explosive Atmospheres - Part 28: Protection of equipment and
transmission systems using optical radiation
ANSI/ISA 60079-10-2 (12.10.05)-2013, Explosive atmospheres - Part 10-2: Classification of areas - Combustible
dust atmospheres
Direct inquiries to: Patricia Sena; patricia.a.sena@ul.org
ANSI/ISA 60079-1 (12.22.01)-2009 (R2013), Explosive Atmospheres - Part 1: Equipment Protection by

Flameproof Enclosures 'd’


ANSI/ISA 60079-6 (12.00.05)-2009 (R2013), Explosive atmospheres - Part 6: Equipment protection by oil-
immersion "o"
ANSI/ISA 60079-7 (12.16.01)-2008 (R2013), Explosive Atmospheres - Part 7: Equipment protection by increased
safety "e"
ANSI/ISA 61010-2-030-2012 (82.02.03), Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits
ANSI/ISA 61241-1 (12.10.03)-2007 (R2015), Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous
(Classified) Locations - Protection by Enclosures "tD"
ANSI/ISA 61241-2 (12.10.06)-2007 (R2015), Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous
(Classified) Locations - Protection by Pressurization "pD"
ANSI/ISA 61241-11 (12.10.04)-2007 (R2015), Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22
Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD"


ANSI/ISA 61241-18 (12.10.07)-2007 (R2015), Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22
Hazardous (Classified) Locations - Protection by Intrinsic Safety "mD"
ANSI/UL 51-2015, Standard for Safety for Power-Operated Pumps and Bypass Valves for Anhydrous Ammonia,
LP-Gas, and Propylene (Proposal dated 1-16-15)
ANSI/UL 100-2012 (R2016), Standard for Safety for Sustainability for Gypsum Boards and Panels
ANSI/UL 294B-2013, Standard for Safety for Power Over Ethernet (PoE) Power Sources for Access Control
Systems and Equipment
ANSI/UL 427-2017, Standard for Safety for Refrigerating Units (UL proposal 12/30/16)
ANSI/UL 474-2015b, Standard for Safety for Dehumidifiers

ANSI/UL 484-2019, Standard for Room Air Conditioners



ANSI/UL 563-2018a, Standard for Ice Makers

ANSI/UL 729-2008 (R2016), Standard for Safety for Oil-Fired Floor Furnaces
ANSI/UL 730-2008 (R2016), Standard for Safety for Oil-Fired Wall Furnaces
ANSI/UL 896-2004 (R2016), Standard for Safety for Oil-Burning Stoves

ANSI/UL 900-2012a, Standard for Safety for Air Filter Units 9 (Proposal bulletin dated 12/16/11)
ANSI/UL 1054-2008 (R2013), Special-Use Switches

ANSI/UL 1313-2015, Standard for Nonmetallic Safety Cans for Petroleum Products
ANSI/UL 1314-2005 (R2014), Standard for Safety for Special-Purpose Metal Containers


ANSI/UL 1413-2012 (R2016), Standard for Safety for High-Voltage Components for Television-Type Appliances
ANSI/UL 1876-2011 (R2015), Standard for Safety for Isolating Signal and Feedback Transformers for Use in
Electronic Equipment
ANSI/UL 1995-2015, Standard for Safety for Heating and Cooling Equipment
ANSI/UL 2007A-2011 (R2016), Shatter Containment of Lamps for Use in Regulated Food Establishments
ANSI/UL 2575-2012, Lithium Ion Battery Systems for Use in Electric Power Tool and Motor Operated, Heated and
Lighting Appliances
ANSI/UL 7003-2016, Standard for Sustainability for Household Clothes Washers

ANSI/UL 7004-2017, Standard for Sustainability for Household Cooking Appliances



ANSI/UL 7005-2017, Standard for Sustainability for Household Clothes Drying Appliances
ANSI/UL 60335-2-79-2016, Standard for Safety for Household and Similar Electrical Appliances, Part 2:
Particular Requirements for High Pressure Cleaners (proposal dated 9-4-15)
ANSI/UL 60730-2-2-2014, Standard for Automatic Electrical Controls for Household and Similar Use - Part 2:
Particular Requirements for Thermal Motor Protectors
ANSI/UL 61215-2012 (R2016), Standard for Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design
Qualification and Type Approval
ANSI/UL 61646-2012 (R2016), Standard for Thin-Film Terrestrial Photovoltaic (PV) Modules - Design
Qualification and Type Approval
ANSI/UL 120404-2012 (R2015), Standard for Pressurized Enclosures (Proposal dated 09-04-15)

Final Actions on American National Standards

The standards actions listed below have been approved by the ANSI Board of Standards Review (BSR) or
by an ANSI-Audited Designator, as applicable.

180 Technology Parkway, Peachtree Corners, GA 30092 | rshanley@ashrae.org, www.ashrae.org
Addenda
ANSI/ASHRAE Addendum ab to ANSI/ASHRAE Standard 34-2019, Designation and Safety Classification of
Refrigerants (addenda to ANSI/ASHRAE Standard 34-2019) Final Action Date: 6/30/2022
Addenda
ANSI/ASHRAE Addendum m to ANSI/ASHRAE Standard 15-2019, Safety Standard for Refrigeration Systems
(addenda to ANSI/ASHRAE Standard 15-2019) Final Action Date: 6/30/2022
Addenda
ANSI/ASHRAE Addendum n to ANSI/ASHRAE Standard 154-2016, Ventilation for Commercial Cooking Operations
Addenda
ANSI/ASHRAE Addendum o to ANSI/ASHRAE Standard 154-2016, Ventilation for Commercial Cooking Operations
Addenda
ANSI/ASHRAE Addendum p to ANSI/ASHRAE Standard 154-2016, Ventilation for Commercial Cooking Operations
Addenda
ANSI/ASHRAE Addendum q to ANSI/ASHRAE Standard 154-2016, Ventilation for Commercial Cooking Operations
Addenda
ANSI/ASHRAE Addendum r to ANSI/ASHRAE Standard 154-2016, Ventilation for Commercial Cooking Operations
Addenda
ANSI/ASHRAE/ASHE Addendum 170f-2021, Ventilation of Health Care Facilities (addenda to ANSI/ASHRAE/ASHE
Standard 170-2021) Final Action Date: 6/30/2022
Addenda
ANSI/ASHRAE/ASHE Addendum b to ANSI/ASHRAE/ASHE Standard 189.3-2021, Design, Construction, and
Operation of Sustainable High-Performance Health Care Facilities (addenda to ANSI/ASHRAE/ASHE Standard
189.3-2017) Final Action Date: 6/30/2022
Addenda
ANSI/ASHRAE/ASHE Addendum c to ANSI/ASHRAE/ASHE Standard 189.3-2021, Design, Construction, and
Operation of Sustainable High-Performance Health Care Facilities (addenda to ANSI/ASHRAE/ASHE Standard
189.3-2017) Final Action Date: 6/30/2022


Addenda
ANSI/ASHRAE/ICC/IES/USGBC Addendum p to ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1-2020, Standard
for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to
ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1-2020) Final Action Date: 6/30/2022
Addenda
ANSI/ASHRAE/ICC/IES/USGBC Addendum q to ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1-2020, Standard
for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (addenda to
Addenda
ANSI/ASHRAE/ICC/IES/USGBC Addendum r to ANSI/ASHRAE/ICC/IES/USGBC Standard 189.1-2020, Standard for
Addenda
ANSI/ASHRAE/IES Addendum bt to ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except
Low-Rise Residential Buildings (addenda to ANSI/ASHRAE/IES Standard 90.1-2019) Final Action Date:
6/30/2022
Addenda
ANSI/ASHRAE/IES Addendum bv to ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except
6/30/2022
Addenda
ANSI/ASHRAE/IES Addendum cs to ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except
6/30/2022
Addenda
ANSI/ASHRAE/IES Addendum ct to ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except
6/30/2022
Addenda
ANSI/ASHRAE/IES Addendum cu to ANSI/ASHRAE/IES Standard 90.1-2019, Energy Standard for Buildings Except
6/30/2022
Reaffirmation
ANSI/ASHRAE Standard 32.2-2018 (R2022), Methods of Testing for Rating Pre-Mix and Post-Mix Beverage
Dispensing Equipment (reaffirmation of ANSI/ASHRAE Standard 32.2-2018) Final Action Date: 6/30/2022
Revision
ANSI/ASHRAE Standard 72-2022, Method of Testing Open and Closed Commercial Refrigerators and Freezers
(revision of ANSI/ASHRAE Standard 72-2018) Final Action Date: 6/30/2022


Revision
ANSI/CTA 2051-A-2022, Wearable Sound Amplifier Performance Criteria (revision and redesignation of ANSI/CTA
2051-2017) Final Action Date: 6/29/2022

789 N. Dixboro Road, Ann Arbor, MI 48105-9723 | rbrooker@nsf.org, www.nsf.org
Revision
ANSI/NSF 173-2022 (i98r2), Dietary Supplements (revision of ANSI/NSF 173-2021) Final Action Date:
6/26/2022
Revision
ANSI/NSF 245-2022 (i26r2), Residential Wastewater Treatment Systems - Nitrogen Reduction (revision of
ANSI/NSF 245-2020) Final Action Date: 6/24/2022
Revision
ANSI/NSF 455-3-2022 (i34r1), Good Manufacturing Practices for Cosmetics (revision of ANSI/NSF 455-3-2021)
Final Action Date: 7/1/2022
Revision
ANSI/NSF/CAN 50-2022 (i188r1), Equipment and Chemicals for Swimming Pools, Spas, Hot Tubs, and Other
Recreational Water Facilities (revision of ANSI/NSF/CAN 50-2020) Final Action Date: 6/27/2022
12 Laboratory Drive, Research Triangle Park, NC 27709-3995 | jennifer.fields@ul.org, https://ul.org/
Reaffirmation
ANSI/UL 2388-2017 (R2022), Standard for Safety for Flexible Lighting Products (May 6, 2022) (reaffirmation of
ANSI/UL 2388-2017) Final Action Date: 6/28/2022
Revision
ANSI/UL 244B-2022a, Standard for Field Installed and/or Field Connected Appliance Controls (revision of ANSI/UL
244B-2022) Final Action Date: 6/28/2022
Revision
ANSI/UL 514A-2022, Standard for Safety for Metallic Outlet Boxes (revision of ANSI/UL 514A-2017) Final Action
Date: 6/30/2022
Revision
ANSI/UL 746C-2022, Standard for Safety for Polymeric Materials - Use in Electrical Equipment Evaluations
(revision of ANSI/UL 746C-2021) Final Action Date: 6/30/2022
Revision
ANSI/UL 2580-2022, Standard for Safety for Batteries for Use in Electric Vehicles (revision of ANSI/UL 2580
-2021) Final Action Date: 6/28/2022

12 Laboratory Drive, Research Triangle Park, NC 27709-3995 | Nicolette.A.Weeks@ul.org, https://ul.org/
Revision
ANSI/UL 2775-2022a, Standard for Fixed Condensed Aerosol Extinguishing System Units (March 25, 2022)
(revision of ANSI/UL 2775-2022) Final Action Date: 6/30/2022

Call for Members (ANS Consensus Bodies)

Directly and materially interested parties who wish to participate as a member of an ANS consensus body for the
standards listed are requested to contact the sponsoring developer directly in a timely manner.
ANSI Accredited Standards Developer

INCITS Executive Board – ANSI Accredited SDO and US TAG to ISO/IEC JTC 1, Information
Technology
The InterNational Committee for Information Technology Standards (INCITS), an ANSI accredited SDO, is the forum of
choice for information technology developers, producers and users for the creation and maintenance of formal de jure
IT standards. INCITS’ mission is to promote the effective use of Information and Communication Technology through
standardization in a way that balances the interests of all stakeholders and increases the global competitiveness of the
member organizations.
The INCITS Executive Board serves as the consensus body with oversight of its 40+ Technical Committees. Additionally,
the INCITS Executive Board has the international leadership role as the US Technical Advisory Group (TAG) to ISO/IEC JTC
1, Information Technology.
Membership in the INCITS Executive Board is open to all directly and materially interested parties in accordance with
INCITS membership rules. To find out more about participating on the INCITS Executive Board, contact Jennifer Garner
at jgarner@itic.org or visit http://www.incits.org/participation/membership-info for more information.
Membership in all interest categories is always welcome; however, the INCITS Executive Board seeks to broaden its
membership base in the following underrepresented categories:
· Producer-Software
· Producer-Hardware
· Distributor
· Service Provider
· Users
· Consultants
· Government
· SDO and Consortia Groups
· Academia
· General Interest
ANSI Accredited Standards Developer

SCTE (Society of Cable Telecommunications Engineers)
SCTE, an ANSI-accredited SDO, is the primary organization for the creation and maintenance of standards for
the cable telecommunications industry. SCTE’s standards mission is to develop standards that meet the
needs of cable system operators, content providers, network and customer premises equipment
manufacturers, and all others who have an interest in the industry through a fair, balanced and transparent
process.
SCTE is currently seeking to broaden the membership base of its ANS consensus bodies and is interested in
new members in all membership categories to participate in new work in fiber-optic networks, advanced
advertising, 3D television, and other important topics. Of particular interest is membership from the content
(program and advertising) provider and user communities.
Membership in the SCTE Standards Program is open to all directly and materially affected parties as defined
in SCTE’s membership rules and operating procedures.
More information is available at www.scte.org or by e-mail from standards@scte.org.


BSR/ARESCA 61400-12-4-202x, Wind energy generation systems - Part 12-4: Numerical site calibration for power
performance testing of wind turbines (identical national adoption of IEC TR 61400-12-4:2020)

BSR/ARESCA 61400-15-1-202x, Wind energy generation systems - Part 15-1: Site suitability input conditions for
wind power plants (identical national adoption of IEC 61400-15-1:2022)

BSR/ARESCA 61400-25-1-202x, Wind energy generation systems - Part 25-1: Communications for monitoring and
control of wind power plants - Overall description of principles and models (identical national adoption of IEC 61400
-25-1:2017)

control of wind power plants - Information models (identical national adoption of IEC 61400-25-2:2015)

control of wind power plants - Information exchange models (identical national adoption of IEC 61400-25-3:2015)

control of wind power plants - Mapping to communication profile (identical national adoption of IEC 61400-25
-4:2016)

control of wind power plants - Compliance testing (identical national adoption of IEC 61400-25-5:2017)


control of wind power plants - Logical node classes and data classes for condition monitoring (identical national
adoption of IEC 61400-25-6:2016)

BSR/ARESCA 61400-27-1-202x, Wind energy generation systems - Part 27-1: Electrical simulation models - Generic
models (identical national adoption of IEC 61400-27-1:2020)

BSR/ARESCA 61400-27-2-202x, Wind energy generation systems - Part 27-2: Electrical simulation models - Model
validation (identical national adoption of IEC 61400-27-2:2020)

BSR/ARESCA 61400-50-3-202x, Wind energy generation systems - Part 50-3: Use of nacelle-mounted lidars for
wind measurements (identical national adoption of IEC 61400-50-3:2022)

and control of wind power plants - Configuration description language (identical national adoption of IEC TS 61400
-25-71:2019)

Two Park Avenue, M/S 6-2B, New York, NY 10016-5990 | ansibox@asme.org, www.asme.org
BSR/ASME PTC 53-202x, Performance Test Code for Mechanical and Thermal Energy Storage Systems (new
standard)
AWS (American Welding Society)

8669 NW 36th Street, Suite 130, Miami, FL 33166-6672 | kbulger@aws.org, www.aws.org
BSR/AWS D14.0/D14.0M-202x, Machinery and Equipment Welding Specification (revision, redesignation and
consolidation of ANSI/AWS D14.3/D14.3M-2018, ANSI/AWS D14.4/D14.4M-2019, ANSI/AWS D14.5/D14.5M
-2009, and AWS D14.1/D14.1M)
BHMA (Builders Hardware Manufacturers Association)

17 Faulkner Drive, Niantic, CT 06357 | mtierney@kellencompany.com, www.buildershardware.com
BSR/BHMA A156.16-202x, Standard for Auxiliary Hardware (revision of ANSI/BHMA A156.16-2013 (R2018))


CGA (Compressed Gas Association)
8484 Westpark Drive, Suite 220, McLean, VA 22102 | tdeary@cganet.com, www.cganet.com
BSR/CGA G-5-202x, Hydrogen (new standard)

BSR/CTA/NSF-2052.1-A-202x, Definitions and Characteristics for Wearable Sleep Monitors (revision and
redesignation of ANSI/CTA/NSF-2052.1)
CTA is seeking new members to join the consensus body. CTA and the R11 Health, Fitness & Wellness Committee
are particularly interested in adding new members (called "users") who acquire health, fitness and wellness
products. from those who create them, and in adding new members who neither produce nor use health, fitness or
wellness products, and others (called members with a "general interest").

BSR/CTA 2106-202x, Characteristics and Requirements for Mental Health Technology Solutions (new standard)
CTA is seeking new members to join the consensus body. CTA and the R11 Health, Fitness & Wellness Committee
are particularly interested in adding new members (called "users") who acquire health, fitness and wellness
products. from those who create them, and in adding new members who neither produce nor use health, fitness or
wellness products, and others (called members with a "general interest").
EOS/ESD (ESD Association, Inc.)

218 W. Court Street, Rome, NY 13440 | jkirk@esda.org, www.esda.org
BSR/EOS ESDA/JEDEC JS-001-202x, ESDA/JEDEC Joint Standard for Electrostatic Discharge Sensitivity Testing -
Human Body Model (HBM) - Component Level (revision of ANSI/ESDA/JEDEC JS-001-2017)
ISANTA (International Staple, Nail and Tool Association)

8735 W. Higgins Road, Suite 300; c/o Association Management Center, Chicago, IL 60631 | jhenry@isanta.org
BSR/ISANTA SNT-101-202x, Safety Requirements for Portable Compressed-Air-Actuated Fastener Driving Tools
(revision of ANSI SNT-101-2015)

INCITS 550-202x, Information technology - Zoned Block Commands - 2 (ZBC-2) (new standard)

INCITS 554-202x, Information technology - SAS Protocol Layer - 5 (SPL-5) (new standard)


INCITS/ISO/IEC 9594-1:2020 [202x], Information technology - Open systems interconnection - Part 1: The Directory:
Overview of concepts, models and services (identical national adoption of ISO/IEC 9594-1:2020 and revision of
INCITS/ISO/IEC 9594-1:2017 [2018])

Models (identical national adoption of ISO/IEC 9594-2:2020 and revision of INCITS/ISO/IEC 9594-2:2017 [2018])

Abstract service definition (identical national adoption of ISO/IEC 9594-3:2020 and revision of INCITS/ISO/IEC
9594-3:2017 [2018])

Procedures for distributed operation (identical national adoption of ISO/IEC 9594-4:2020 and revision of
INCITS/ISO/IEC 9594-4:2017 [2018])

Protocol specifications (identical national adoption of ISO/IEC 9594-5:2020 and revision of INCITS/ISO/IEC 9594
-5:2017 [2018])

Selected attribute types (identical national adoption of ISO/IEC 9594-6:2020 and revision of INCITS/ISO/IEC 9594
-6:2017 [2018])

Selected object classes (identical national adoption of ISO/IEC 9594-7:2020 and revision of INCITS/ISO/IEC 9594
-7:2017 [2018])


Public-key and attribute certificate frameworks (identical national adoption of ISO/IEC 9594-8:2020 and revision of
INCITS/ISO/IEC 9594-8:2017 [2018])

Replication (identical national adoption of ISO/IEC 9594-9:2020 and revision of INCITS/ISO/IEC 9594-9:2017
[2018])

INCITS/ISO/IEC 9594-11:2020 [202x], Information technology - Open systems interconnection directory - Part 11:
Protocol specifications for secure operations (identical national adoption of ISO/IEC 9594-11:2020)

INCITS/ISO/IEC 9594-2:2020/AM1:2021 [202x], Information technology - Open systems interconnection - Part 2:

The Directory: Models - Amendment 1 (identical national adoption of ISO/IEC 9594-2:2020/AM1:2021)

INCITS/ISO/IEC 9594-8:2020/COR1:2021 [202x], Information technology - Open systems interconnection - Part 8:

The Directory: Public-key and attribute certificate frameworks - Technical Corrigendum 1 (identical national adoption
of ISO/IEC 9594-8:2020/COR1:2021)

BSR/NSF 41-202x (i11r2), Non-liquid Saturated Treatment Systems (revision of ANSI/NSF 41-2018)

789 N. Dixboro Road, Ann Arbor, MI 48105-9723 | aburr@nsf.org, www.nsf.org
BSR/NSF 332-202x (i9r3.1), Sustainability Assessment for Resilient Floor Coverings (revision of ANSI/NSF 332
-2015)

BSR/NSF 350-202x (i72r1), Onsite Residential and Commercial, Water Reuse Treatment Systems (revision of
ANSI/NSF 350-2020)


SDI (ASC A250) (Steel Door Institute)
30200 Detroit Road, Westlake, OH 44145 | leh@wherryassoc.com, www.wherryassocsteeldoor.org
BSR A250.4-202x, Physical Endurance for Steel Doors, Frames and Frame Anchors (revision of ANSI A250.4-2018)

American National Standards (ANS) Process ANSI Standards Action - July 8, 2022 - Page 58 of 111 pages
American National Standards (ANS) Process

Please visit ANSI’s website (www.ansi.org) for resources that will help you to understand, administer and participate in
the American National Standards (ANS) process. Documents posted at these links are updated periodically as new
documents and guidance are developed, whenever ANS-related procedures are revised, and routinely with respect to
lists of proposed and approved ANS. The main ANS-related linkis www.ansi.org/asd and here are some direct links as
well as highlights of information that is available:
Where to find Procedures, Guidance, Interpretations and More…

Please visit ANSI’s website (www.ansi.org)
• ANSI Essential Requirements: Due process requirements for American National Standards (always current edition):
www.ansi.org/essentialrequirements
• ANSI Standards Action (weekly public review announcements of proposed ANS and standards developer accreditation
applications, listing of recently approved ANS, and proposed revisions to ANS-related procedures): www.ansi.
org/standardsaction
• Accreditation information – for potential developers of American National Standards (ANS): www.ansi.
org/sdoaccreditation
• ANS Procedures, ExSC Interpretations and Guidance (including a slide deck on how to participate in the ANS process
and the BSR-9 form): www.ansi.org/asd
• Lists of ANSI-Accredited Standards Developers (ASDs), Proposed ANS and Approved ANS: www.ansi.org/asd
• American National Standards Key Steps: www.ansi.org/anskeysteps
• American National Standards Value: www.ansi.org/ansvalue
• ANS Web Forms for ANSI-Accredited Standards Developers - PINS, BSR8|108, BSR11, Technical Report: https://www.
ansi.org/portal/psawebforms/
• Information about standards Incorporated by Reference (IBR): https://ibr.ansi.org/
• ANSI - Education and Training: www.standardslearn.org
American National Standards (ANS) Process

American National Standards Under Continuous Maintenance

The ANSI Essential Requirements: Due Process Requirements for American National Standards provides two options
for the maintenance of American National Standards (ANS): periodic maintenance (see clause 4.7.1) and continuous
maintenance (see clause 4.7.2). Continuous maintenance is defined as follows:
The standard shall be maintained by an accredited standards developer. A documented program for periodic
publication of revisions shall be established by the standards developer. Processing of these revisions shall be in
accordance with these procedures. The published standard shall include a clear statement of the intent to consider
requests for change and information on the submittal of such requests. Procedures shall be established for timely,
documented consensus action on each request for change and no portion of the standard shall be excluded from the
revision process. In the event that no revisions are issued for a period of four years, action to reaffirm or withdraw
the standard shall be taken in accordance with the procedures contained in the ANSI Essential Requirements.
The Executive Standards Council (ExSC) has determined that for standards maintained under the Continuous
Maintenance option, separate PINS announcements are not required. The following ANSI Accredited Standards
Developers have formally registered standards under the Continuous Maintenance option.
AAMI (Association for the Advancement of Medical Instrumentation)

AARST (American Association of Radon Scientists and Technologists)
AGA (American Gas Association)
AGSC (Auto Glass Safety Council)
ASC X9 (Accredited Standards Committee X9, Incorporated)
GBI (Green Building Initiative)
HL7 (Health Level Seven)
Home Innovation (Home Innovation Research Labs)
IES (Illuminating Engineering Society)
ITI (InterNational Committee for Information Technology Standards)
MHI (Material Handling Industry)
NBBPVI (National Board of Boiler and Pressure Vessel Inspectors)
NCPDP (National Council for Prescription Drug Programs)
NEMA (National Electrical Manufacturers Association)
NFRC (National Fenestration Rating Council)
NISO (National Information Standards Organization)
PRCA (Professional Ropes Course Association)
RESNET (Residential Energy Services Network, Inc.)
SAE (SAE International)
TCNA (Tile Council of North America)
TIA (Telecommunications Industry Association)
ULSE (UL Standards & Engagement)
To obtain additional information with regard to these standards, including contact information at the ANSI Accredited
Standards Developer, please visit ANSI Online at www.ansi.org/asd, select “American National Standards Maintained
Under Continuous Maintenance.” Questions? psa@ansi.org.
ANSI-Accredited Standards Developers (ASD) Contacts

The addresses listed in this section are to be used in conjunction with standards listed in PINS, Call for Comment, Call for Members and Final
Actions. This section is a list of developers who have submitted standards for this issue of Standards Action – it is not intended to be a list of
all ANSI-Accredited Standards Developers. Please send all address corrections to the PSA Department at psa@ansi.org.
Lauren Bauerschmidt
ANS EOS/ESD
LBauerschmidt@assp.org
American Nuclear Society ESD Association, Inc.
555 North Kensington Avenue ASTM 218 W. Court Street
La Grange Park, IL 60526 ASTM International Rome, NY 13440
www.ans.org 100 Barr Harbor Drive www.esda.org
Kathryn Murdoch West Conshohocken, PA 19428 Jennifer Kirk
kmurdoch@ans.org www.astm.org jkirk@esda.org
Laura Klineburger
ARESCA ESTA
accreditation@astm.org
American Renewable Energy Standards Entertainment Services and Technology
and Certification Association AWS Association
256 Farrell Farm Road American Welding Society 271 Cadman Plaza, P.O. Box 23200
Norwich, VT 05055 8669 NW 36th Street, Suite 130 Brooklyn, NY 11202
www.aresca.us Miami, FL 33166 www.esta.org
George Kelly www.aws.org Richard Nix
secretary@aresca.us Kevin Bulger standards@esta.org
kbulger@aws.org
ASHRAE IEEE
American Society of Heating, Refrigerating BHMA Institute of Electrical and Electronics
and Air-Conditioning Engineers, Inc. Builders Hardware Manufacturers Engineers
180 Technology Parkway Association 445 Hoes Lane
Peachtree Corners, GA 30092 17 Faulkner Drive Piscataway, NJ 08854
www.ashrae.org Niantic, CT 06357 www.ieee.org
Carmen King www.buildershardware.com Lisa Weisser
cking@ashrae.org Michael Tierney l.weisser@ieee.org
Emily Toto mtierney@kellencompany.com
IEEE (ASC C63)
etoto@ashrae.org
CGA Institute of Electrical and Electronics
Mark Weber Engineers
Compressed Gas Association
mweber@ashrae.org 445 Hoes Lane
8484 Westpark Drive, Suite 220
Ryan Shanley McLean, VA 22102 Piscataway, NJ 08854
rshanley@ashrae.org www.cganet.com www.ieee.org
Tanisha Meyers-Lisle Thomas Deary Jennifer Santulli
tmlisle@ashrae.org tdeary@cganet.com J.Santulli@ieee.org
Thomas Loxley
CSA ISANTA
tloxley@ashrae.org
CSA America Standards Inc. International Staple, Nail and Tool
ASME 8501 East Pleasant Valley Road Association
American Society of Mechanical Engineers Cleveland, OH 44131 8735 W. Higgins Road, Suite 300; c/o
Two Park Avenue, M/S 6-2B www.csagroup.org Association Management Center
New York, NY 10016 Chicago, IL 60631
Debbie Chesnik
www.asme.org ansi.contact@csagroup.org
Terrell Henry Jeff Henry
ansibox@asme.org CTA jhenry@isanta.org
Consumer Technology Association
ASSP (Safety) 1919 S. Eads Street ITI (INCITS)
American Society of Safety Professionals Arlington, VA 22202 InterNational Committee for Information
520 N. Northwest Highway www.cta.tech Technology Standards
Park Ridge, IL 60068 700 K Street NW, Suite 600
Catrina Akers
www.assp.org Washington, DC 20001
cakers@cta.tech
www.incits.org
ANSI-Accredited Standards Developers Contact Information

Barbara Bennett Katelyn Simpson Derrick Martin

comments@standards.incits.org KSimpson@tileusa.com Derrick.L.Martin@ul.org
Deborah Spittle Linda Phinney
ULSE
comments@standards.incits.org Linda.L.Phinney@ul.org
UL Standards & Engagement
12 Laboratory Drive Marcia Kawate
NEMA (ASC C12)
Research Triangle Park, NC 27709 Marcia.M.Kawate@ul.org
National Electrical Manufacturers
Association https://ul.org/
WMA
1300 North 17th Street, Suite 900 Griff Edwards World Millwork Alliance
Rosslyn, VA 22209 griff.edwards@ul.org 10047 Robert Trent Jones Parkway
www.nema.org Jennifer Fields New Port Richey, FL 34655
Paul Orr jennifer.fields@ul.org http://worldmillworkalliance.com
Pau_orr@nema.org Jonette Herman Jessica Ferris
Jonette.A.Herman@ul.org jferris@worldmillworkalliance.com
NEMA (ASC C136)
National Electrical Manufacturers Nicolette Weeks
Association Nicolette.A.Weeks@ul.org
1300 North 17th Street, Suite 900 Patricia Sena
Rosslyn, VA 22209 patricia.a.sena@ul.org
www.nema.org
ULSE
David Richmond
David.Richmond@nema.org
171 Nepean Street, Suite 400
NEMA (ASC C8) Ottawa, ON K2P 0
National Electrical Manufacturers https://ul.org/
Association Kevin Wu
1300 North 17th Street, Suite 900 kevin.hf.wu@ul.org
Arlington, VA 22209 Sabrina Khrebtov
www.nema.org sabrina.khrebtov@ul.org
Khaled Masri
Khaled.Masri@nema.org ULSE
NSF 333 Pfingsten Road
NSF International Northbrook, IL 60062
789 N. Dixboro Road https://ul.org/
Ann Arbor, MI 48105 Alan McGrath
www.nsf.org alan.t.mcgrath@ul.org
Andrea Burr Amy Walker
aburr@nsf.org Amy.K.Walker@ul.org
Jason Snider Isabella Brodzinski
jsnider@nsf.org isabella.brodzinski@ul.org
Rachel Brooker Lisette Delgado
rbrooker@nsf.org Lisette.delgado@ul.org
SDI (ASC A250) Megan Monsen

Steel Door Institute megan.monsen@ul.org
30200 Detroit Road Megan Van Heirseele
Westlake, OH 44145 Megan.M.VanHeirseele@ul.org
www.wherryassocsteeldoor.org Susan Malohn
Linda Hamill Susan.P.Malohn@ul.org
leh@wherryassoc.com
ULSE
TCNA (ASC A108) UL Standards & Engagement
Tile Council of North America 47173 Benicia Street
100 Clemson Research Blvd. Fremont, CA 94538
Anderson, SC 29625 https://ul.org/
www.tcnatile.com

ISO & IEC Draft International Standards

This section lists proposed standards that the International Organization for Standardization (ISO) and the International Electrotechnical
Commission (IEC) are considering for approval. The proposals have received substantial support within the technical committees or
subcommittees that developed them and are now being circulated to ISO and IEC members for comment and vote. Standards Action
readers interested in reviewing and commenting on these documents should order copies from ANSI.
COMMENTS ORDERING INSTRUCTIONS

Comments regarding ISO documents should be sent to ANSI’s ISO ISO and IEC Drafts can be made available by contacting ANSI’s
Team (isot@ansi.org); comments on ISO documents must be Customer Service department. Please e-mail your request for
submitted electronically in the approved ISO template and as a Word an ISO or IEC Draft to Customer Service at sales@ansi.org.
document as other formats will not be accepted. When making your request, please provide the date of the
Those regarding IEC documents should be sent to Tony Zertuche, Standards Action issue in which the draft document you are
General Secretary, USNC/IEC, at ANSI's New York offices requesting appears.
(tzertuche@ansi.org). The final date for offering comments is listed
after each draft.
ISO Standards Fertilizers and soil conditioners (TC 134)

ISO/DIS 6181, Fertilizers and soil conditioners - Liquid methylen-
Air quality (TC 146) urea slow release fertilizers - General requirements -
4/29/2022, $40.00
ISO/FDIS 8518, Workplace air - Determination of particulate lead
and lead compounds - Flame and electrothermal atomic ISO/FDIS 8157, Fertilizers, soil conditioners and beneficial
absorption spectrometric methods - 9/18/2021, $98.00 substances - Vocabulary - 6/24/2021, $88.00
Aircraft and space vehicles (TC 20) Fine ceramics (TC 206)
ISO/DIS 5110, Test method for flight stability of multi-copter UAS ISO/DIS 20505, Fine ceramics (advanced ceramics, advanced
under wind and rain conditions - 5/6/2022, $62.00 technical ceramics) - Mechanical properties of ceramic
composites at room temperature - Determination of the
ISO/DIS 24245, Space systems - Global Navigation Satellite
interlaminar shear strength and shear modulus of continuous-
System (GNSS) receiver class codes - 5/5/2022, $71.00
fibre-reinforced composites by the compression of double-
notched test pieces and by the Iosipescu test - 4/29/2022,
Applications of statistical methods (TC 69) $82.00
ISO/FDIS 28596, Sampling procedures for inspection by
attributes - Two-stage sampling plans for auditing and for Fire safety (TC 92)
inspection under prior information - 2/12/2021, $112.00
ISO/DIS 24678-4, Fire Safety Engineering - Requirements
governing algebraic formulae - Part 4: Smoke layers -
Cleaning equipment for air and other gases (TC 142) 4/29/2022, $98.00
ISO/FDIS 10121-3, Test methods for assessing the performance
of gas-phase air cleaning media and devices for general Fluid power systems (TC 131)
ventilation - Part 3: Classification system for GPACDs applied to
ISO/FDIS 12151-2, Connections for hydraulic fluid power and
treatment of outdoor air - 3/6/2021, $82.00
general use - Hose fittings - Part 2: Hose fittings with ISO 8434
-1 24° cone connector ends with O-rings - 8/26/2021, $62.00
Ergonomics (TC 159)
ISO/DIS 9241-221, Ergonomics of human-system interaction - Furniture (TC 136)
Part 221: Human-centred design process assessment model -
ISO/DIS 9098-1, Bunk beds and high beds - Safety requirements
9/15/2022, $165.00
and tests - Part 1: Safety requirements - 4/30/2022, $71.00
Facilities management (TC 267) ISO/DIS 9098-2, Bunk beds for domestic use - Safety
ISO/DIS 41015, Facility management - Influencing organizational requirements and tests - Part 2: Test methods - 4/29/2022,
behaviours for improved facility outcomes - 5/6/2022, $82.00 $82.00

Geotechnics (TC 182) Medical devices for injections (TC 84)

ISO/FDIS 22476-1, Geotechnical investigation and testing - Field ISO/DIS 23217, Injection systems for self-administration by
testing - Part 1: Electrical cone and piezocone penetration test - paediatric patients - Guidance for design - 5/6/2022, $107.00
4/30/2021, $134.00
Non-destructive testing (TC 135)
Health Informatics (TC 215) ISO/FDIS 24543, Non-destructive testing - Acoustic emission
ISO/DIS 41064, Health informatics - Standard communication testing - Verification of the receiving sensitivity spectra of
protocol - Computer-assisted electrocardiography - 5/5/2022, piezoelectric acoustic emission sensors - 9/9/2021, $125.00
$203.00
Nuclear energy (TC 85)
Internal combustion engines (TC 70) ISO/DIS 4233, Hot helium leak testing method for high
ISO/DIS 4548-13, Methods of test for full-flow lubricating oil temperature pressure-bearing components in nuclear fusion
filters for internal combustion engines - Part 13: Static burst reactors - 5/2/2022, $58.00
pressure test for composite filter housings - 4/29/2022,
$40.00 ISO/DIS 7753, Nuclear criticality safety - Use of criticality accident
alarm systems for operations - 9/16/2022, $93.00
ISO/FDIS 8528-10, Reciprocating internal combustion engine
driven alternating current generating sets - Part 10: ISO/DIS 24389-1, Management of radioactive waste from nuclear
Measurement of airborne noise - 12/18/2020, $112.00 facilities - Part 1: General principles, objectives and practical
approaches - 5/2/2022, $67.00
Laboratory glassware and related apparatus (TC 48)
Other
ISO/DIS 8655-10, Piston-operated volumetric apparatus - Part
10: User guidance and requirements for competence, training, ISO/CIE DIS 23603, Standard method of assessing the spectral
and POVA suitability - 5/2/2022, $88.00 quality of daylight simulators for visual appraisal and
measurement of colour - 4/29/2022, $71.00
Materials, equipment and offshore structures for petroleum
and natural gas industries (TC 67) Paints and varnishes (TC 35)
ISO/DIS 24201, Petroleum, petrochemical and natural gas ISO/DIS 20567-4, Paints and varnishes - Determination of stone-
industries - Bulk material for offshore projects - Tertiary chip resistance of coatings - Part 4: Mobile multi-impact testing
outfitting structures - 9/16/2022, $185.00 on a small testing area - 4/29/2022, $58.00
ISO/DIS 24202, Petroleum, petrochemical and natural gas Personal safety - Protective clothing and equipment (TC 94)
industries - Bulk material for offshore projects - Monorail beam
ISO/DIS 11611, Protective clothing for use in welding and allied
and padeye - 9/16/2022, $107.00
processes - 9/16/2022, $119.00
ISO/FDIS 24139-1, Petroleum and natural gas industries -
Corrosion resistant alloy clad bends and fittings for pipeline Plastics (TC 61)
transportation system - Part 1: Clad bends - 7/22/2021, ISO/DIS 293, Plastics - Compression moulding of test specimens
$112.00 of thermoplastic materials - 4/30/2022, $46.00
Measurement of fluid flow in closed conduits (TC 30) ISO/DIS 4410, Experimental characterization of in-plane
permeability of fibrous reinforcements for liquid composite
ISO/FDIS 5167-3, Measurement of fluid flow by means of
moulding - 5/1/2022, $98.00
pressure differential devices inserted in circular cross-section
conduits running full - Part 3: Nozzles and Venturi nozzles -, ISO/DIS 20753, Plastics - Test specimens - 5/1/2022, $67.00
$112.00
ISO/DIS 22183, Plastics - Validation of force-time curves obtained
ISO/FDIS 5167-5, Measurement of fluid flow by means of from high- speed tensile tests - 5/5/2022, $88.00
pressure differential devices inserted in circular cross-section
conduits running full - Part 5: Cone meters - 10/14/2021, Railway applications (TC 269)
$67.00
ISO/FDIS 19659-3, Railway applications - Heating, ventilation and
ISO/FDIS 5167-6, Measurement of fluid flow by means of air conditioning systems for rolling stock - Part 3: Energy
pressure differential devices inserted in circular cross-section efficiency - 10/1/2021, $88.00
conduits running full - Part 6: Wedge meters - 10/14/2021,
$62.00

Road vehicles (TC 22) Technical systems and aids for disabled or handicapped
ISO/DIS 8714, Electric road vehicles - Reference energy persons (TC 173)
consumption and range - Test procedures for passenger cars ISO/FDIS 7176-25, Wheelchairs - Part 25: Lead-acid batteries
and light commercial vehicles - 9/22/2022, $71.00 and chargers for powered wheelchairs - Requirements and test
methods - 6/5/2021, $71.00
ISO/DIS 34503, Road Vehicles - Test scenarios for automated
driving systems - Taxonomy for operational design domain - ISO/DIS 7176-31, Wheelchairs - Part 31: Lithium-ion battery
5/5/2022, $93.00 systems and chargers for powered wheelchairs - Requirements
and test methods - 5/5/2022, $62.00
ISO/DIS 15031-3, Road vehicles - Communication between
vehicle and external equipment for emissions-related
Textiles (TC 38)
diagnostics - Part 3: Diagnostic connector and related electrical
circuits: Specification and use - 4/30/2022, $33.00 ISO/DIS 5773, Textiles - Determination of components in flax
fibres - 5/2/2022, $53.00
Rubber and rubber products (TC 45) ISO/DIS 18782, Textiles - Determination of dynamic hygroscopic
ISO/DIS 5260, Epoxidized natural rubber - Determination of heat generation - 9/17/2022, $71.00
epoxidation and ring opening level by NMR spectrometry -
4/30/2022, $53.00 ISO/DIS 17751-1, Textiles - Quantitative analysis of cashmere,
wool, other specialty animal fibres and their blends - Part 1:
ISO/DIS 19043, Natural rubber latex concentrate - Determination Light microscopy method - 9/18/2022, $112.00
of total phosphate content by spectrophotometric method -
5/5/2022, $46.00 Tractors and machinery for agriculture and forestry (TC 23)
ISO/DIS 24483, Epoxidised natural rubber - Specifications - ISO 8437-4:2019/DAmd 1, - Amendment 1: Snow throwers -
4/30/2022, $40.00 Safety requirements and test procedures - Part 4: Additional
national and regional requirements - Amendment 1 -
Security (TC 292) 9/16/2022, $33.00
ISO/DIS 22342, Security and resilience - Protective security -

Transport information and control systems (TC 204)
Guidelines for the development of a security plan for an
organization - 4/29/2022, $58.00 ISO/DIS 4273, Intelligent transport systems - Automated braking
during low speed manoeuvring (ABLS) - Requirements and test
Ships and marine technology (TC 8) procedures - 9/18/2022, $88.00
ISO/FDIS 11711-2, Ships and marine technology - Aquatic ISO/IEC JTC 1, Information Technology
nuisance species - Part 2: Ballast water sample collection and
handling - 10/3/2020, $112.00 ISO/IEC 7816-8:2021/DAmd 1, - Amendment 1: Identification
cards - Integrated circuit cards - Part 8: Commands and
Small craft (TC 188) mechanisms for security operations - Amendment 1:
ISO/FDIS 21487, Small craft - Permanently installed petrol and Interoperability for the interchange of security operations using
diesel fuel tanks - 4/4/2021, $71.00 quantum safe cryptography - 9/16/2022, $119.00
ISO/IEC DIS 24392, Cybersecurity - Security reference model for

Sports and recreational equipment (TC 83) industrial Internet platform (SRM- IIP) - 5/2/2022, $102.00
ISO/DIS 4980, Benefit-risk assessment for sports, for recreational
and sports facilities including equipment - 9/17/2022, ISO/IEC DIS 4396-5, Telecommunications and information
$119.00 exchange between systems - Future network recursive inter-
network architecture - Part 5: Incremental enrollment
procedures - 5/1/2022, $33.00
Steel (TC 17)
ISO/FDIS 14284, Steel and iron - Sampling and preparation of ISO/IEC DIS 4396-6, Telecommunications and information
samples for the determination of chemical composition - exchange between systems - Future network recursive inter-
9/10/2021, $112.00 network architecture - Part 6: RINA data transfer service -
5/1/2022, $58.00
Surface chemical analysis (TC 201)
ISO/IEC DIS 4396-8, Telecommunications and information
ISO/FDIS 17862, Surface chemical analysis - Secondary ion mass exchange between systems - Future network recursive inter-
spectrometry - Linearity of intensity scale in single ion counting network architecture - Part 8: RINA general delimiting
time-of-flight mass analysers - 2/13/2020, $77.00 procedures - 5/1/2022, $40.00

ISO/IEC FDIS 23090-3, Information technology - Coded

Audio, video and multimedia systems and equipment (TC
representation of immersive media - Part 3: Versatile video
100)
coding - 8/6/2021, $291.00
100/3771/CDV, IEC 62087-2 ED2: Audio, video, and related
ISO/IEC DIS 23837-1, Information technology security techniques equipment - Determination of power consumption - Part 2:
- Security requirements, test and evaluation methods for Signals and media (TA 19), 09/23/2022
quantum key distribution - Part 1: Requirements - 5/6/2022,
$125.00 100/3772/CDV, IEC 62087-3 ED2: Audio, video, and related
equipment - Determination of power consumption - Part 3:
ISO/IEC DIS 23837-2, Information technology security techniques Television sets (TA 19), 09/23/2022
- Security requirements, test and evaluation methods for
quantum key distribution - Part 2: Evaluation and testing Automatic controls for household use (TC 72)
methods - 5/6/2022, $155.00
72/1307(F)/FDIS, IEC 60730-1 ED6: Automatic electrical controls
ISO/IEC DIS 27006-1, Requirements for bodies providing audit - Part 1: General requirements, 07/22/2022
and certification of information security management systems -
Part 1: General - 5/2/2022, $125.00 Cables, wires, waveguides, r.f. connectors, and accessories
for communication and signalling (TC 46)
ISO/IEC FDIS 19823-11, Information technology - Conformance
test methods for security service crypto suites - Part 11: Crypto 46A/1581/FDIS, IEC 61196-1-125 ED1: Coaxial communication
suite PRESENT-80 - 11/1/2021, $58.00 cable - Part 1-125: Electrical test methods - Test for equivalent
permittivity and equivalent dissipation factor of dielectric,
ISO/IEC FDIS 23008-12, Information technology - MPEG systems 08/12/2022
technologies - Part 12: Image File Format -, $165.00
46A/1582/FDIS, IEC 61196-1-126 ED1: Coaxial communication
ISO/IEC DIS 23090-15/DAmd 1, - Amendment 1: Information cables - Part 1-126: Electrical test methods - Corona extinction
technology - Coded representation of immersive media - Part voltage, 08/12/2022
15: Conformance testing for versatile video coding -
Amendment 1: Operation range extensions - 9/16/2022, 46A/1577/CDV, IEC 61196-1-123 ED1: Coaxial Communication
$82.00 Cables - Part 1-123: Electrical test methods - Test for
attenuation constant of radiating cable, 09/23/2022
IEC Standards Electric cables (TC 20)

20/2029/CDV, IEC 61442 ED3: Test methods for accessories for
100/3774/CDV, IEC 60268-23 ED1: Sound system equipment -
power cables with rated voltages from 6 kV (Um = 7,2 kV) up to
Part 23: TVs and monitors - Loudspeaker systems,
30 kV (Um = 36 kV), 09/23/2022
09/23/2022
Electric traction equipment (TC 9)

All-or-nothing electrical relays (TC 94)
9/2847/CD, IEC 62427 ED2: Railway applications - Compatibility
94/724/CD, IEC 61810-7-0 ED1: All-or-nothing electrical relays -
between rolling stock and train detection systems,
Tests and Measurements - Part 7-0: General and Guidance,
09/23/2022
08/26/2022
94/727/CD, IEC 61810-7-16 ED1: All-or-nothing electrical relays - Electrical accessories (TC 23)
Tests and Measurements - Part 7-16: Soldering, 08/26/2022 23H/512/CD, IEC TS 62196-7 ED1: Plugs, socket-outlets, vehicle
connectors and vehicle inlets - Conductive charging of electric
vehicles - Part 7: Vehicle adapter, 09/23/2022
Tests and Measurements - Part 7-19: Electrical endurance,
08/26/2022
Electrical equipment in medical practice (TC 62)
94/730/CD, IEC 61810-7-23 ED1: All-or-nothing electrical relays - 62C/844/CD, IEC 61674 ED3: Medical electrical equipment -
Tests and Measurements - Part 7-23: Overload (contact circuit), Dosimeters with ionization chambers and/or semiconductor
08/26/2022 detectors as used in X-ray diagnostic imaging, 09/23/2022

Tests and Measurements - Part 7-43: Proof tracking index (PTI),
08/26/2022

Electromechanical components and mechanical structures Hydraulic turbines (TC 4)

for electronic equipments (TC 48) 4/442/CD, IEC 63461 ED1: Pelton hydraulic turbines - Model
48B/2973(F)/FDIS, IEC 63171-5 ED1: Connectors for electrical acceptance tests, 09/23/2022
and electronic equipment - Part 5: Detail specification for 2-way
M8 and M12 circular connectors, shielded or unshielded, free Industrial-process measurement and control (TC 65)
and fixed - Mechanical mating information, pin assignment and
65E/907(F)/FDIS, IEC 62453-309 ED3: Field device tool (FDT)
additional requirements for Type 5, 07/29/2022
interface specification - Part 309: Communication profile
48B/2974/CD, IEC 60512-28-100 ED3: Connectors for electrical integration - IEC 61784 CPF 9, 07/29/2022
and electronic equipment - Tests and measurements - Part 28
65E/928/NP, PNW 65E-928 ED1: IEC 6xxxx DB - Common data
-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g,
concepts for smart manufacturing, 09/23/2022
09/23/2022
Lamps and related equipment (TC 34)

34D/1664/CD, IEC 60598-1/FRAG16 ED10: Fragment 16 -
Fibre optics (TC 86) Luminaires - Part 1: General requirements and tests,
09/23/2022
86B/4626(F)/FDIS, IEC 61753-089-02 ED1: Fibre optic
interconnecting devices and passive components -
Performance standard - Part 089-02: Non-connectorised single- Maritime navigation and radiocommunication equipment
mode bidirectional OTDR monitoring WWDM for category C - and systems (TC 80)
Indoor controlled environment, 07/22/2022 80/1043/CD, IEC 61108-7 ED1: Maritime navigation and
radiocommunication equipment and systems - Global
86B/4635/FDIS, IEC 61753-043-02 ED1: Fibre optic navigation satellite systems (GNSS) - Part 7: Satellite Based
interconnecting devices and passive components - Augmentation System (SBAS) L1 - Receiver Equipment -
Performance standard - Part 043-02: Simplex patch-cord style Performance standards, methods of testing and required test
single-mode fibre wavelength selective devices with cylindrical results, 08/26/2022
ferrule connectors for category C - Controlled environment,
08/12/2022 80/1042/CDV, IEC 62287-1/AMD1 ED3: Amendment 1 -
Maritime navigation and radiocommunication equipment and
86B/4629/FDIS, IEC 61755-2-1 ED2: Fibre optic interconnecting systems - Class B shipborne equipment of the automatic
devices and passive components - Connector optical interfaces identification system (AIS) - Part 1: Carrier-sense time division
for single-mode fibres - Part 2-1: Connection parameters of multiple access (CSTDMA) techniques, 09/23/2022
dispersion unshifted physically contacting fibres - Non-angled,
08/12/2022
Measuring equipment for electromagnetic quantities (TC
85)
85/834/CDV, IEC 61557-13 ED2: Electrical safety in low voltage
86A/2220/CD, IEC 60794-1-307 ED1: Optical fibre cables - Part distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
1-307: Generic specification - Basic optical cable test Equipment for testing, measuring or monitoring of protective
procedures - Cable element test methods - Tube kinking, measures - Part 13: Hand-held and hand-manipulated current
method G7, 09/23/2022 clamps and sensors for measurement of leakage currents in
electrical distribution systems, 09/23/2022
86C/1801/CDV, IEC 61291-2 ED5: Optical amplifiers - Part 2:
Single channel applications - Performance specification
template, 09/23/2022 Measuring relays and protection equipment (TC 95)
95/496/NP, PNW 95-496 ED1: Measuring relays and protection
86C/1800/CDV, IEC 62149-4 ED3: Fibre optic active components equipment - Part 216-3: Digital Interface - Test specification for
and devices - Performance standards - Part 4: 1 300 nm fibre protection data communication of Line Current Differential
optic transceivers for Gigabit Ethernet application, Protection, 09/23/2022
09/23/2022
86B/4636/CD, IEC 63267-2-1 ED1: Fibre optic interconnecting Nanotechnology standardization for electrical and
devices and passive components - Connector optical interfaces electronic products and systems (TC 113)
for enhanced macro bend multimode fibres - Part 2-1: 113/686/CD, IEC TS 62565-5-1 ED1: Nanomanufacturing -
Connection parameters of physically contacting 50 m core Material specification - Part 5-1: Nanoporous activated carbon -
diameter fibres non-angled, 09/23/2022 Blank detail specification: Electrochemical capacitors,
09/23/2022

Performance of household electrical appliances (TC 59)

59D/486/CDV, IEC 60456/AMD1 ED5: Amendment 1 - Clothes
washing machines for household use - Methods for measuring
the performance, 09/23/2022
Power system control and associated communications (TC

57)
57/2505/DTS, IEC TS 62351-100-4 ED1: Power systems
management and associated information exchange - Data and
communication security - Part 100-4: Cybersecurity
conformance testing for IEC 62351-4, 09/23/2022
Solar photovoltaic energy systems (TC 82)

82/2053/CDV, IEC 60904-2 ED4: Photovoltaic devices - Part 2:
Requirements for photovoltaic reference devices, 09/23/2022
Standard voltages, current ratings and frequencies (TC 8)

8B/120/DTR, IEC TR 62898-4 ED1: Microgrids: Part 4 - Use
cases, 08/26/2022
8A/109/DTR, IEC TR 63401-1 ED1: Interconnecting inverter-

based resources to low short circuit ratio AC networks,
08/26/2022
Surface mounting technology (TC 91)

91/1802/CD, IEC 62878-2-603 ED1: Device embedding
assembly technology - Part 2-603: Guideline for stacked
electronic module - Test method of intra-module electrical
connectivity, 09/23/2022
Switchgear and Controlgear and Their Assemblies for Low

Voltage (TC 121)
121B/157/CDV, IEC 62208 ED3: Empty enclosures for low-
voltage switchgear and controlgear assemblies - General
requirements, 09/23/2022
(SmartCities)
SyCSmartCities/259/NP, PNW TS SYCSMARTCITIES-259 ED1:
Systems Reference Deliverable (SRD) Smart city system
Ontology -- Part 1: Gap Analysis, 09/23/2022
Tools for live working (TC 78)

78/1397/FDIS, IEC 62819 ED1: Live working - Eye, face and
head protectors against the effects of electric arc - Performance
requirements and test methods, 08/12/2022

Newly Published ISO & IEC Standards

Listed here are new and revised standards recently approved and promulgated by ISO - the International Organization for Standardization
– and IEC – the International Electrotechnical Commission. Most are available at the ANSI Electronic Standards Store (ESS) at www.ansi.
org. All paper copies are available from Standards resellers (http://webstore.ansi.org/faq.aspx#resellers).
ISO Standards Ferrous metal pipes and metallic fittings (TC 5)

ISO 4370:2022, Environmental life cycle assessment and
Aircraft and space vehicles (TC 20) recycling of ductile iron pipes for water applications, $111.00
ISO 24246:2022, Space systems - Requirements for global

Industrial automation systems and integration (TC 184)
navigation satellite system (GNSS) positioning augmentation
centers, $175.00 ISO 23704-1:2022, General requirements for cyber-physically
controlled smart machine tool systems (CPSMT) - Part 1:
ISO 24330:2022, Space systems - Rendezvous and Proximity Overview and fundamental principles, $175.00
Operations (RPO) and On Orbit Servicing (OOS) - Programmatic
principles and practices, $149.00 ISO 23704-2:2022, General requirements for cyber-physically
controlled smart machine tool systems (CPSMT) - Part 2:
Anaesthetic and respiratory equipment (TC 121) Reference architecture of CPSMT for subtractive
manufacturing, $200.00
ISO 18778:2022, Respiratory equipment - Particular
requirements for basic safety and essential performance of
Internal combustion engines (TC 70)
infant cardiorespiratory monitors, $225.00
ISO 8528-5:2022, Reciprocating internal combustion engine
Dentistry (TC 106) driven alternating current generating sets - Part 5: Generating
sets, $200.00
ISO 7494-2:2022, Dentistry - Stationary dental units and dental
patient chairs - Part 2: Air, water, suction and wastewater
Light metals and their alloys (TC 79)
systems, $175.00
ISO 6362-1:2022, Wrought aluminium and aluminium alloys -
Fasteners (TC 2) Extruded rods/bars, tubes and profiles - Part 1: Technical
conditions for inspection and delivery, $111.00
ISO 4014:2022, Fasteners - Hexagon head bolts - Product grades
A and B, $111.00 ISO 6362-2:2022, Wrought aluminium and aluminium alloys -
Extruded rods/bars, tubes and profiles - Part 2: Mechanical
ISO 4015:2022, Fasteners - Hexagon head bolts with reduced
properties, $149.00
shank (shank diameter ≈ pitch diameter) - Product grade B,
$73.00 ISO 6362-3:2022, Wrought aluminium and aluminium alloys -
Extruded rods/bars, tubes and profiles - Part 3: Tolerances on
ISO 4016:2022, Fasteners - Hexagon head bolts - Product grade
form and dimensions for extruded rectangular bars, $73.00
C, $73.00
ISO 4017:2022, Fasteners - Hexagon head screws - Product
grades A and B, $73.00
form and dimensions for profiles, $111.00
ISO 4018:2022, Fasteners - Hexagon head screws - Product
grade C, $73.00
ISO 8676:2022, Fasteners - Hexagon head screws, with fine pitch form and dimensions for round, square and hexagonal bars,
thread - Product grades A and B, $73.00 $73.00
ISO 8765:2022, Fasteners - Hexagon head bolts, with fine pitch ISO 6362-7:2022, Wrought aluminium and aluminium alloys -
thread - Product grades A and B, $73.00 Extruded rods/bars, tubes and profiles - Part 7: Chemical
composition, $73.00

ISO 6363-1:2022, Wrought aluminium and aluminium alloys - Road vehicles (TC 22)
Cold-drawn rods/bars, tubes and wires - Part 1: Technical
ISO 21448:2022, Road vehicles - Safety of the intended
conditions for inspection and delivery, $111.00
functionality, $250.00
Cold-drawn rods/bars, tubes and wires - Part 2: Mechanical Round steel link chains, chain slings, components and
properties, $111.00
accessories (TC 111)
ISO 2415:2022, Forged shackles for general lifting purposes -
ISO 6363-3:2022, Wrought aluminium and aluminium alloys - Dee shackles and bow shackles, $149.00
Cold-drawn rods/bars, tubes and wires - Part 3: Tolerances on
form and dimensions for drawn rods/bars and wires, $48.00 Rubber and rubber products (TC 45)
ISO 6363-4:2022, Wrought aluminium and aluminium alloys - ISO 19983:2022, Rubber - Determination of precision of test
Cold-drawn rods/bars, tubes and wires - Part 4: Tolerances on methods, $175.00
form and dimensions for drawn rectangular bars and wires,
ISO 4664-1:2022, Rubber, vulcanized or thermoplastic -
$73.00
Determination of dynamic properties - Part 1: General guidance,
ISO 6363-5:2022, Wrought aluminium and aluminium alloys - $200.00
Cold-drawn rods/bars, tubes and wires - Part 5: Tolerances on
form and dimensions for drawn square and hexagonal bars and Soil quality (TC 190)
wires, $48.00 ISO 11271:2022, Soil quality - Determination of redox potential -
Field method, $111.00
Cold-drawn rods/bars, tubes and wires - Part 6: Tolerances on Surface chemical analysis (TC 201)
form and dimensions for drawn round tubes, $48.00
ISO 18115-3:2022, Surface chemical analysis - Vocabulary - Part
Microbeam analysis (TC 202) 3: Terms used in optical interface analysis, $48.00
ISO 24639:2022, Microbeam analysis - Analytical electron Technical systems and aids for disabled or handicapped
microscopy - Calibration procedure of energy scale for persons (TC 173)
elemental analysis by electron energy loss spectroscopy,
ISO 21856:2022, Assistive products - General requirements and
$111.00
test methods, $225.00
Mining (TC 82)
Terminology (principles and coordination) (TC 37)
ISO 23875:2021/Amd 1:2022, - Amendment 1: Mining - Air
ISO 704:2022, Terminology work - Principles and methods,
quality control systems for operator enclosures - Performance
$225.00
requirements and test methods - Amendment 1, $20.00
Thermal insulation (TC 163)

Natural gas (TC 193)
ISO 24260:2022, Thermal insulation products - Hemp fiber mat
ISO 23219:2022, Natural gas - Format for data from gas
and board - Specification, $111.00
chromatograph analysers for natural gas - XML file format,
$175.00
Timber (TC 218)
Other ISO 13061-8:2022, Physical and mechanical properties of wood -
Test methods for small clear wood specimens - Part 8:
ISO 14087:2022, Leather - Physical and mechanical tests -
Determination of ultimate strength in shearing parallel to grain,
Determination of bending force, $48.00
$48.00
Railway applications (TC 269)
Tobacco and tobacco products (TC 126)
ISO 4975:2022, Railway applications - Braking system - Quality of
ISO 24199:2022, Vapour products - Determination of nicotine in
compressed air for pneumatic apparatus and systems,
vapour product emissions - Gas chromatographic method,
$111.00
$73.00

Tractors and machinery for agriculture and forestry (TC 23)

ISO 24120-1:2022, Agricultural irrigation equipment - Guideline
on the implementation of pressurized irrigation systems - Part
1: General principles of irrigation, $175.00
ISO Technical Reports

Personal safety - Protective clothing and equipment (TC 94)
ISO/TR 8546:2022, Hand protection - Guidance for selection and
use, $175.00
Steel (TC 17)

ISO/TR 20580:2022, Preparation of metallographic specimens,
$111.00
ISO Technical Specifications

Paper, board and pulps (TC 6)
ISO/TS 23885:2022, Paper, board and graphic technology -
Determination of the coating strength in the inner fold,
$111.00
Sieves, sieving and other sizing methods (TC 24)

ISO/TS 4807:2022, Reference materials for particle size
measurement - Specification of requirements, $149.00
ISO/IEC JTC 1, Information Technology
ISO/IEC 23003-4:2020/Amd 1:2022, - Amendment 1:

Information technology - MPEG audio technologies - Part 4:
Dynamic range control - Amendment 1: Side chain
normalization, $20.00
ISO/IEC 30150-1:2022, Information technology - Affective

computing user interface (AUI) - Part 1: Model, $111.00
IEC Standards
Lamps and related equipment (TC 34)
IEC 60598-2-11 Amd.1 Ed. 2.0 b:2022, Amendment 1 -
Luminaires - Part 2-11: Particular requirements - Aquarium
luminaires, $25.00
IEC 60598-2-11 Ed. 2.1 b:2022, Luminaires - Part 2-11:

Particular requirements - Aquarium luminaires, $164.00

International Organization for Standardization (ISO) ANSI Standards Action - July 8, 2022 - Page 71 of 111 pages
International Organization for Standardization (ISO)

Call for U.S. TAG Administrator
ISO/TC 324 - Sharing Economy
Comment Deadline: July 15, 2022
ANSI directly administers the U.S. TAG Administrator for ISO/TC 324 with the support of the Organization for
the Advancement of Structured Information Standards (OASIS). OASIS has advised ANSI to relinquish its role
as U.S. TAG Administrator for this committee.
ISO/TC 324 operates under the following scope:
Standardization in the field of sharing economy.
Excluded: Technical aspects of information security or risk management guidelines already covered by
ISO/IEC JTC 1/SC27 and ISO/TC 262, respectively.
Organizations interested in serving as the U.S. TAG Administrator or participating on a U.S. TAG should
contact ANSI’s ISO Team (isot@ansi.org).
Establishment of ISO Technical Committee

ISO/IEC 341 - Heat Supply Network
A new ISO Technical Committee, ISO/TC 341 – Heat supply network, has been formed. The Secretariat has
been assigned to China (SAC).
Standardization in the field of HSN including design, construction, integration, control and regulation based
on heating and cooling supply pipeline system.
Exclude: Standardization of heat sources and space heating systems covered by ISO/TC 11 Boilers and
pressure vessels, ISO/TC 86 Refrigeration and air-conditioning, ISO/TC 163 Thermal performance and energy
use in the built environment, ISO/TC 138 Plastics pipes, fittings and valves for the transport of fluids, ISO/TC
205 Building environment design, ISO/TC 267 Facility management, ISO/TC 268 Sustainable cities and
communities, ISO/TC 301 Energy management and energy savings, and IEC SyC Smart Cities, IEC SyC Smart
Energy.
Organizations interested in serving as the U.S. TAG Administrator or participating on the U.S. TAG should

International Organization for Standardization (ISO) ANSI Standards Action - July 8, 2022 - Page 72 of 111 pages

ISO/TC 339 – Small hydropower plants
A new ISO Technical Committee, ISO/TC 339 – Small hydropower plants, has been formed. The Secretariat
has been assigned to China (SAC).
Standardization in the field of small hydropower plants

ISO/TC 340 – Natural gas fueling stations
A new ISO Technical Committee, ISO/TC 340 – Natural gas fueling stations, has been formed. The Secretariat
has been assigned to France (AFNOR).
Standardization in the field of design, construction and operation of stations for fuelling compressed natural
gas (CNG) and liquefied natural gas (LNG) to vehicles. It includes equipment, safety devices and maintenance.

Registration of Organization Names in the United States ANSI Standards Action - July 8, 2022 - Page 73 of 111 pages
Registration of Organization Names in the United States

The Procedures for Registration of Organization Names in the United States of America (document ISSB 989) require
that alphanumeric organization names be subject to a 90-day Public Review period prior to registration. For further
information, please contact the Registration Coordinator at (212) 642-4975.
When organization names are submitted to ANSI for registration, they will be listed here alphanumerically.
Alphanumeric names appearing for the first time are printed in bold type. Names with confidential contact information,
as requested by the organization, list only public review dates.
Public Review
NOTE: Challenged alphanumeric names are underlined. The Procedures for Registration provide for a challenge process,
which follows in brief. For complete details, see Section 6.4 of the Procedures.
A challenge is initiated when a letter from an interested entity is received by the Registration Coordinator. The letter
shall identify the alphanumeric organization name being challenged and state the rationale supporting the challenge. A
challenge fee shall accompany the letter. After receipt of the challenge, the alphanumeric organization name shall be
marked as challenged in the Public Review list. The Registration Coordinator shall take no further action to register the
challenged name until the challenge is resolved among the disputing parties.
Registration of Organization Names in the United States

Proposed Foreign Government Regulations ANSI Standards Action - July 8, 2022 - Page 74 of 111 pages
Proposed Foreign Government Regulations

Call for Comment
U.S. manufacturers, exporters, regulatory agencies and standards developing organizations may be interested in
proposed foreign technical regulations notified by Member countries of the World Trade Organization (WTO). In
accordance with the WTO Agreement on Technical Barriers to Trade (TBT Agreement), Members are required to notify
proposed technical regulations that may significantly affect trade to the WTO Secretariat in Geneva, Switzerland. In
turn, the Secretariat issues and makes available these notifications. The purpose of the notification requirement is to
provide global trading partners with an opportunity to review and comment on the regulations before they become
final.
The USA Inquiry Point for the WTO TBT Agreement is located at the National Institute of Standards and Technology
(NIST) in the Standards Coordination Office (SCO). The Inquiry Point distributes the notified proposed foreign technical
regulations (notifications) and makes the associated full-texts available to U.S. stakeholders via its online service, Notify
U.S. Interested U.S. parties can register with Notify U.S. to receive e-mail alerts when notifications are added from
countries and industry sectors of interest to them. To register for Notify U.S., please visit: http://www.nist.
gov/notifyus/.
The USA WTO TBT Inquiry Point is the official channel for distributing U.S. comments to the network of WTO TBT
Enquiry Points around the world. U.S. business contacts interested in commenting on the notifications are asked to
review the comment guidance available on Notify U.S. at: https://tsapps.nist.gov/notifyus/data/guidance/guidance.cfm
prior to submitting comments.
For further information about the USA TBT Inquiry Point, please visit: https://www.nist.gov/standardsgov/what-we-
do/trade-regulatory-programs/usa-wto-tbt-inquiry-point Contact the USA TBT Inquiry Point at (301) 975-2918; F: (301)
926-1559; E: usatbtep@nist.gov or notifyus@nist.gov.
Proposed Foreign Government Regulations

BSR/ASHRAE Addendum a to
ANSI/ASHRAE Standard 145.1-2015
_____________________Public Review Draft

Proposed Addendum a to Standard
145.1-2015, Laboratory Test Method
for Assessing the Performance of
Gas-Phase Air Cleaning Systems:
Loose Granular Media
First Public Review (July 2022)
(Draft shows Proposed Changes to Current Standard)
This draft has been recommended for public review by the responsible project committee. To submit a comment on
this proposed standard, go to the ASHRAE website at www.ashrae.org/standards-research--technology/public-review-
drafts and access the online comment database. The draft is subject to modification until it is approved for publication
by the Board of Directors and ANSI. Until this time, the current edition of the standard (as modified by any published
addenda on the ASHRAE website) remains in effect. The current edition of any standard may be purchased from the
ASHRAE Online Store at www.ashrae.org/bookstore or by calling 404-636-8400 or 1-800-727-4723 (for orders in the
U.S. or Canada).
This standard is under continuous maintenance. To propose a change to the current standard, use the change submittal
form available on the ASHRAE website, www.ashrae.org.
The appearance of any technical data or editorial material in this public review document does not constitute
endorsement, warranty, or guaranty by ASHRAE of any product, service, process, procedure, or design, and ASHRAE
expressly disclaims such.
© 2022 ASHRAE. This draft is covered under ASHRAE copyright. Permission to reproduce or redistribute all or any
part of this document must be obtained from the ASHRAE Manager of Standards, 180 Technology Parkway, Peachtree
Corners, GA 30092. Phone: 404-636-8400, Ext. 1125. Fax: 404-321-5478. E-mail: standards.section@ashrae.org.
ASHRAE, 180 Technology Parkway, Peachtree Corners GA 30092

BSR/ASHRAE Addendum a to ANSI/ASHRAE Standard 145.1-2015, Laboratory Test Method for Assessing the
Performance of Gas-Phase Air Cleaning Systems: Loose Granular Media
First Public Review Draft
(This foreword is not part of this standard. It is merely informative and does not contain
requirements necessary for conformance to the standard. It has not been processed
according to the ANSI requirements for a standard and may contain material that has not
been subject to public review or a consensus process. Unresolved objectors on informative
material are not offered the right to appeal at ASHRAE or ANSI.)
FOREWORD
The main purpose of proposing changes to these definitions is to harmonize them as much as possible with
definitions in Standard 145.2 (as amended by RP-1838) and Chapter 47 in the Applications Handbook.
Note: In this addendum, changes to the current standard are indicated in the text by underlining (for
additions) and strikethrough (for deletions) unless the instructions specifically mention some other means
of indicating the changes.
3. DEFINITIONS AND ACRONYMS

3.1 Definitions. Some terms are defined here for the purposes of this standard. When definitions
are not provided, refer either to ASHRAE Terminology of Heating, Ventilation, Air Conditioning and
Refrigeration1 or to ASTM D-2652-05A, Standard Terminology Relating to Activated Carbon.2
Otherwise, common usage shall apply.
adsorbent: any solid material having the ability to retain gaseous or vapor contaminants on its surface by
physical or chemical processes.having the ability to concentrate significant quantities of other substances
on its surface.
adsorption, chemical (chemisorption): binding of a gas or vaporcontaminant to the surface of a solid by
forces with energy levels approximately those of a chemical bond. Binding occurs to both inner and outer
pore surfaces. BindingThis process is usually followed by a chemical reaction that removes the
compoundcontaminant from the airstream but may add other gasses to it. Chemisorption is an irreversible
process.
adsorption, physical: attraction of a contaminant to the outer surface and inner pore surface of adsorbent
media by physical forces (Van der Waals forces). process in which the molecules of a gas or vapor adhere
by physical forces (Van der Waals forces) to the surface, both the outer surface and the inner pore surfaces,
of a solid substance. Physical adsorption is a reversible process.
airflow rate: volume of air passing flowing through the test sample per unit time.
breakthrough: first appearance in the effluent of a challenge contaminant under specified conditions. see
penetration.
breakthrough (penetration) curve: plot of challenge compoundcontaminant penetration versus time for
a particular challenge concentration and airflow.
catalyst: any substance of which a small amount relative to the reactantsproportion notably affects the
rate of a chemical reaction without itself being consumed or undergoing a chemical change. Most
catalysts accelerate reactions, but a few retard them (negative catalysts or inhibitors) retard them.
Note: catalysts may become poisoned, fouled, or deactivated during use.
Challenge gas: chemical compoundgas or vapor that is being used as the challenge contaminant of interest
for any given test. For examples, see Tables 1, 2, and 3.
Challenge (air) stream: test contaminant(s) of interest diluted with clean air to the concentration(s) and
airflow conditions of the test prior to filtration.
ANSI/ASHRAE Standard 145.1-2015 3

BSR/ASHRAE Addendum a to ANSI/ASHRAE Standard 145.1-2015, Laboratory Test Method for Assessing the
Performance of Gas-Phase Air Cleaning Systems: Loose Granular Media
Note: This is the gas stream that contacts the media bed at a defined face velocity to produce a desired
residence time.
chemisorption: see adsorption, chemical.
concentration: quantity of one substance dispersed in a defined amount of another.
density, apparent (density, bulk): mass under specified conditions of a unit volume of a solid physical
adsorbent or chemisorbentsorbent, including its pore volume and inter-particle voids.
density, packing: (a) weight of adsorbent per unit volume determined using ASTM D-28543 as specified
in Section 5.4.3 of this standard; (b) mass of a substance per unit volume described as the ratio between the
actual density and what is theoretically possible if voids did not exist.
desorption: process by which adsorbedsorbate molecules leave the surface of a physicalthe adsorbent
and re-enter the airfluid stream.
Note: Desorption is the Oopposite of adsorption.
removal efficiency curve: a plot of contaminant removal efficiency (or mass of challenge compound
removed) against time for a particular challenge concentration and airflow.
end point: the point at which the test is stopped due to (a) specified elapsed time or (b) reaching the
maximum specified concentration of a challenge gas in the air downstream of the media bed.occurrence of
the maximum permissible concentration of the challenge gas in the air downstream of a media bed or,
alternatively, the time when a predetermined contaminant penetration is reached.
mean particle diameter: weighted average particle size, in millimetres (inches), of a granular adsorbent.
It is computed by multiplying the percent retained in a size fraction by the respective mean sieve
openings, summing these values, and dividing by 100.
media: a granular or pelletized physical adsorbents or chemisorbents used in gaseous contaminant
removal equipment.
penetration: ratio of challenge gascontaminant concentration downstream of the media bed to the
upstream (challenge)concentration, sometimes expressed as a percentage.
Note 1: Related to removal efficiency by the following removal expression:
Efficiency = (1 – Penetration)
Note 2: the term “breakthrough” is often used to denote the first measurable penetration of challenge gas
through a media bed.
pressure drop: difference in absolute (static) pressure between two points in an airflow system.,
Note: it is caused by frictional resistance to airflow in a duct, filter, or other system component such as a
media bed or air-cleaning device.
removal efficiency: that fraction or percentage of a challenge gas molecules that are is removed from the
challenge air stream at a given time by physical and/or chemical means.
residence time: theoretical time that an increment of air (or gas or vapormolecule or contaminant) is
within the confines of a media bed, ignoring the fraction of internal volume that is occupied by the media..
This standard neglects the fact that the media occupies at least 40% of the volume of the bed (empty bed
contact time).
Note: the media may occupy more than 40% of the volume of the bed.
ANSI/ASHRAE Standard 145.1-2015 3

Public Review Draft

Proposed Addendum t to Standard 189.1-2020
Standard for
the Design of
High-Performance
Green Buildings
Except Low-Rise
Residential Buildings
(Draft Shows Proposed Changes to Current Standard)
This draft has been recommended for public review by the responsible project committee. To submit a comment on this proposed
standard, go to the ASHRAE website at www.ashrae.org/standards-research--technology/public-review-drafts and access the online
comment database. The draft is subject to modification until it is approved for publication by the Board of Directors and ANSI. Until this
time, the current edition of the standard (as modified by any published addenda on the ASHRAE website) remains in effect. The current
edition of any standard may be purchased from the ASHRAE Online Store at www.ashrae.org/bookstore or by calling 404-636-8400 or
1-800-727-4723 (for orders in the U.S. or Canada).
This standard is under continuous maintenance. To propose a change to the current standard, use the change submittal form available
on the ASHRAE website, www.ashrae.org.
The appearance of any technical data or editorial material in this public review document does not constitute endorsement, warranty, or
guaranty by ASHRAE of any product, service, process, procedure, or design, and ASHRAE expressly disclaims such.
© June 18, 2020 ASHRAE. This draft is covered under ASHRAE copyright. Permission to reproduce or redistribute all or any part of
this document must be obtained from the ASHRAE Manager of Standards, 180 Technology Pkwy NW, Peachtree Corners, GA
30092. Phone: 404-636-8400, Ext. 1125. Fax: 404-321-5478. E-mail: standards.section@ashrae.org.
ASHRAE, 180 Technology Pkwy NW, Peachtree Corners, GA 30092

BSR/ASHRAE/ICC/USGBC/IES Addendum t to ANSI/ASHRAE/ICC/USGBC/IES Standard 189.1-2020, Standard for the Design

of High-Performance Green Buildings Except Low-Rise Residential Buildings First Public Review Draft
©
April 27, 2022 ASHRAE
This draft is covered under ASHRAE copyright. The appearance of any technical data or editorial material in this
publication document does not constitute endorsement, warranty, or guaranty by ASHRAE of any product, service,
process, procedure, design or the like and ASHRAE expressly disclaims such. Permission to republish or redistribute
must be obtained from the MOS.
(This foreword is not part of this standard. It is merely informative and does not contain requirements
necessary for conformance to the standard. It has not been processed according to the ANSI
requirements for a standard and may contain material that has not been subject to public review or a
consensus process. Unresolved objectors on informative material are not offered the right to appeal at
ASHRAE or ANSI.)
Foreword
Indoor agriculture energy usage is projected to grow significantly nationwide in this decade, driven in large part by
state legalization of medical and recreational marijuana and growing demand for locally grown produce. In 2017, a
total of 20 million square feet of building space was dedicated to growing crops indoors which can have energy use
intensities that rival data centers. Energy use in these facilities is dominated by lighting systems which accounts for
25 to 70% of the facilities energy use and HVAC and dehumidification systems which accounts of the bulk of the
remaining energy use. This addendum addresses the energy use of these facilities in three ways.
The proposal adds additional lighting efficacy and renewable energy requirements to these facilities. Lighting in non-
stacked indoor operations operate on average 4,600 hours per year or 12 hours per day. Proposed Addendum ar to
ASHRAE 90.1 which concluded its first public review November of 2021 establishes efficacy requirements for lighting
in indoor horticulture at 1.9 PPE, and 1.7 PPE for greenhouses. This proposal increases the efficacy requirement to
2.1 PPE. 92% of LED products that meet the Design Light Consortium criteria already meet an efficacy of 2.1 PPE
which is a 10% savings over a 1.9PPE standard and 20% savings over a 1.7PPE standard. This proposal will also
require lighting from these facilities be provided by renewable energy to account for increased carbon emissions from
indoor grow and greenhouse facilities compared with growing crops outdoors. This measure will increase construction
costs but reduce operating costs.
This proposal also addresses the energy use of HVAC systems. Indoor grow facilities typically prefer to not use
economizers because they can introduce contaminants into the growing space, and required economizers are
frequently disabled. The proposed language would allow indoor grow facilities and greenhouses to be exempt from
economizer requirements if these facilities use equipment that is 10% more efficient than federal minimum standards.
The proposal is similar to a code requirement in Seattle, WA which allows indoor grow facilities that install cooling
equipment that is 20% more efficient than federal minimum standards to be exempt from economizer requirements.
This proposal adds a compliance option so will not increase the cost of construction.
[Note to Reviewers: This addendum makes proposed changes to the current standard. These changes are indicated
in the text by underlining (for additions) and strikethrough (for deletions) except where the reviewer instructions
specifically describe some other means of showing the changes. Only these changes to the current standard are open
for review and comment at this time. Additional material is provided for context only and is not open for comment
except as it relates to the proposed changes.]
Page 1 of 2
BSR/ASHRAE/ICC/USGBC/IES Addendum t to ANSI/ASHRAE/ICC/USGBC/IES Standard 189.1-2020, Standard for the Design

of High-Performance Green Buildings Except Low-Rise Residential Buildings First Public Review Draft
Addendum t to 189.1-2020
Add Definitions to Section 3 as follows:
greenhouse: a space with a skylight roof ratio of 50% or more above the growing area, used exclusively
for horticultural production, cultivation or maintenance by utilizing a sunlit environment. Greenhouses
are those that are erected for a period of 180 days or more.
horticultural lighting: electric lighting used for horticultural production, cultivation or maintenance with
either cord-and-plug or hard-wired connections for electric power.
indoor grow space: a space, other than a greenhouse, used exclusively for horticultural production,
cultivation, or maintenance.
photosynthetic photon efficacy (PPE): photosynthetic photon flux between 400- 700nm emitted by a
light source divided by its electrical input power, expressed in units of micromoles per second per watt,
or micromoles per joule (µmol/J) as defined by ANSI/ASABE S640
Add Sections 7.3.6 as follows:

7.3.6 Energy Systems for Horticulture.
7.3.6.1 Horticultural Lighting. Luminaires in indoor grow spaces and greenhouse spaces used for
horticultural lighting shall have a photosynthetic photon efficacy (PPE) of at least 2.1 μmol/J. Additional
renewable energy for horticultural lighting shall be provided and sized to provide the amount of adjusted
renewable energy calculated in accordance with Section 7.4.1.2 and qualified in accordance with Section
7.4.1.3. The adjusted renewable energy shall be equal to or greater than the installed horticultural lighting
wattage multiplied by 4,600 full load hours per year for indoor grow spaces and the installed horticultural
lighting wattage multiplied by 2,100 full load hours per year for greenhouses.
Add Normative Reference as follows:

American Society of Agricultural and Biological Engineers (ASABE)
2950 Niles Road
St. Joseph, MI 49085 USA
1-269-429-0300; www.asabe.org
ANSI/ASABE S640-2017 Quantities and Units of Electromagnetic Radiation for 3
Plants (Photosynthetic Organisms)
United States Department of Energy (USDOE)
Energy Information Administration
Washington, DC 20585, United States
1-202-586-500; www.eia.doe.gov/emeu/cbecs/content.html and http://tonto.eia.doe.gov/state
10 CFR, Part 430 Energy Conservation Program for Consumer Products 7.3.6
Page 2 of 2
Public Review Draft

Proposed Addendum x to Standard 189.1-2020
Standard for
the Design of
High-Performance
Green Buildings
Except Low-Rise

BSR/ASHRAE/ICC/USGBC/IES Addendum x to ANSI/ASHRAE/ICC/USGBC/IES Standard 189.1-2020, Standard for the

Design of High-Performance Green Buildings Except Low-Rise Residential Buildings First Public Review Draft
© April 29, 2022 ASHRAE
necessary for conformance to the standard. It has not been processed according to the ANSI
requirements for a standard and may contain material that has not been subject to public review or a
consensus process. Unresolved objectors on informative material are not offered the right to appeal at
ASHRAE or ANSI.)
Foreword
This addendum adds a normative reference to Chapter 3, the occupancy classification and use chapter of the
International Building Code© (IBC). Standard 189.1 already references IBC occupancy groups in Section 5.3.7.3 and
has other sections that are applicable to specific building uses. Some of these existing sections, and potentially future
provisions, may benefit from the ability to make a reference to the defined occupancy classifications of the IBC. This
change will also enhance the correlation between the International Green Construction Code and the other
International Codes, of most which reference the IBC for occupancy classification.
The International Codes are available free of charge at the International Code Council’s website. Standard 189.1
users who wish to access Chapter 3 of the IBC can do so at this location:
https://codes.iccsafe.org/content/IBC2021P2/chapter-3-occupancy-classification-and-use
Addendum x to 189.1-2020
Add a new Section 4.5 as follows:
4.5 Occupancy classification. Where occupancy classifications are specified by this standard they shall be as
defined in Chapter 3 of the International Building Code.
Add a new Section 11 reference as follows:

International Code Council
500 New Jersey Ave NW # 300
Washington, DC 20001, United States
1-800-786-4452; www.iccsafe.org
2021 IBC International Building Code 5.3.7.3
Page 1 of 1
Public Review Draft

Proposed Addendum y to Standard 189.1-2020
Standard for
the Design of
High-Performance
Green Buildings
Except Low-Rise
First Public Review (July, 2022)

BSR/ASHRAE/ICC/USGBC/IES Addendum y to ANSI/ASHRAE/ICC/USGBC/IES Standard 189.1-2020, Standard for

the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings First Public Review Draft
©
June 10, 2022 ASHRAE
This draft is covered under ASHRAE copyright. The appearance of any technical data or editorial material
in this publication document does not constitute endorsement, warranty, or guaranty by ASHRAE of any
product, service, process, procedure, design or the like and ASHRAE expressly disclaims such. Permission to
republish or redistribute must be obtained from the MOS.
(This foreword is not part of this standard. It is merely informative and does not contain
requirements necessary for conformance to the standard. It has not been processed according
to the ANSI requirements for a standard and may contain material that has not been subject to
public review or a consensus process. Unresolved objectors on informative material are not offered
the right to appeal at ASHRAE or ANSI.)
Foreword
This addendum adds language to 8.3.1.7 to add a prohibition on vaping.
These changes do not add cost or scope to the existing language of the standard.
[Note to Reviewers: This addendum makes proposed changes to the current standard. These changes are
indicated in the text by underlining (for additions) and strikethrough (for deletions) except where the reviewer
instructions specifically describe some other means of showing the changes. Only these changes to the current
standard are open for review and comment at this time. Additional material is provided for context only and is not
open for comment except as it relates to the proposed changes.]
Addendum y to8.3.1.7
Modify section 189.1-2020 -Smoking and Vaping in 8.3.1.7
as follows:
8.3.1.7 Environmental Tobacco Smoke Smoking and Vaping
a. Smoking and vaping shall not be allowedbe prohibited inside the building. Signage stating such shall
be posted within 10 ft (3 m) of each building entrance.
b. Any exterior designated smoking or vaping areas shall be exterior to the building and shall be located
not less than a minimum of 25 ft (7.5 m) away from building entrances, outdoor air intakes, and operable
windows.
BSR/ASHRAE/IES Addendum bp
to ANSI/ASHRAE/IES Standard 90.1-2019

Proposed Addendum bp to
Standard 90.1-2019, Energy Standard
for Buildings Except Low-Rise
comment database. The draft is subject to modification until it is approved for publication by the Board of Directors and ANSI. Until
this time, the current edition of the standard (as modified by any published addenda on the ASHRAE website) remains in effect. The
current edition of any standard may be purchased from the ASHRAE Online Store at www.ashrae.org/bookstore or by calling 404-
636-8400 or 1-800-727-4723 (for orders in the U.S. or Canada).
This standard is under continuous maintenance. To propose a change to the current standard, use the change submittal form
available on the ASHRAE website, www.ashrae.org.
The appearance of any technical data or editorial material in this public review document does not constitute endorsement, warranty,
or guaranty by ASHARE of any product, service, process, procedure, or design, and ASHRAE expressly disclaims such.
© 2022 ASHRAE. This draft is covered under ASHRAE copyright. Permission to reproduce or redistribute all or any part of this
document must be obtained from the ASHRAE Manager of Standards, 180 Technology Parkway Peachtree Corners, GA 30092.
Phone: 404-636-8400, Ext. 1125. Fax: 404-321-5478. E-mail: standards.section@ashrae.org.
ASHRAE, 180 Technology Parkway NW, Peachtree Corners, GA 30092

BSR/ASHRAE/IES Addendum bp to ANSI/ASHRAE Standard 90.1-2019, Energy StandardAction
ANSI Standards for Buildings Except
- July 8, 2022 Low-Rise
- Page 86 of 111 pages
© 2022 ASHRAE
process, procedure, design or the like and ASHRAE expressly disclaims such. Permission to republish or
redistribute must be obtained from the MOS.
necessary for conformance to the standard. It has not been processed according to the ANSI requirements for a
standard and may contain material that has not been subject to public review or a consensus process.
Unresolved objectors on informative material are not offered the right to appeal at ASHRAE or ANSI.)
FOREWORD
This addendum removes the exception for captive card key controls for hotel guestrooms since captive card
key technology is often bypassed and not a commonly used technology.
Captive card key controls are a manual control (not automatic) that are easily and often bypassed thereby
negating any potential energy savings. Most of the time upon check-in, the hotel provides two keys to the guest
and tells them to always keep one key in the slot to get power into the room, so even when the guests leave the
room, one of their keys is left in the slot, the lighting stays on, and no energy savings is realized. What’s more,
when no key cards are in the slot there is no power to the lighting. So, guests who are not familiar with their
hotel room will have limited visibility (especially upon entry into the room) which can cause a safety or
dissatisfaction issue for the guest. Lastly, green building design standards like ASHRAE 189.1 have
recognized the captive key card shortcomings and don’t allow for their use to comply. ASHRAE 90.1 should
not allow them for compliance either. The standard should require only automatic guestroom controls that
will guarantee the energy savings and provide guests with a more satisfactory experience.
This addendum should not negatively impact cost effectiveness. This removes an obsolete option with
declining use in the market. Installation of the newer technology automatic controls that will be required are
similar or lower in cost.
Addendum BP to 90.1-2019
Modify the standard as follows (IP and SI Units)
6.4.3.3.5.3 Automatic Control

Card key card controls shall be permitted to be used to indicate occupancy.
9.4.1.3 Special Applications […]
b. Guestrooms
1. All lighting and all switched receptacles in guestrooms and suites in hotels, motels, boarding houses, or
similar buildings shall be automatically controlled such that the power to the lighting and switched receptacles
BSR/ASHRAE/IES Addendum bp to ANSI/ASHRAE Standard 90.1-2019, Energy StandardAction
in each enclosed space will be turned off within 20 minutes after all occupants leave that space. Card key
controls shall not be used to comply with this provision.
Exception to 9.4.1.3(b)(1)
Enclosed spaces where the lighting and switched receptacles are controlled by card key controls
and bathrooms are exempt.
2. Bathrooms shall have a separate control device installed to automatically turn off the bathroom lighting
within 30 minutes after all occupants have left the bathroom.
Exception to 9.4.1.3(b)(2)
Night lighting of up to 5 W per bathroom is exempt.
[…]
BSR/ASHRAE/IES Addendum cv

Proposed Addendum cv to
standard, go to the ASHRAE website at www.ashrae.org/standards-research--technology/public-review-drafts and access the
online comment database. The draft is subject to modification until it is approved for publication by the Board of Directors and
ANSI. Until this time, the current edition of the standard (as modified by any published addenda on the ASHRAE website)
remains in effect. The current edition of any standard may be purchased from the ASHRAE Online Store at
www.ashrae.org/bookstore or by calling 404-636-8400 or 1-800-727-4723 (for orders in the U.S. or Canada).
The appearance of any technical data or editorial material in this public review document does not constitute endorsement,
warranty, or guaranty by ASHARE of any product, service, process, procedure, or design, and ASHRAE expressly disclaims
such.
document must be obtained from the ASRAE Manager of Standards, 180 Technology Parkway NW, Peachtree Corners, GA

ANSI Standards
BSR/ASHRAE/IES Addendum cv to ANSI/ASHRAE/IES Standard 90.1-2019, Action - July
Energy Standard for8,Buildings
2022 - Page 89 of Low-
Except 111 pages
Rise Residential Buildings
© 2022 ASHRAE
This draft is covered under ASHRAE copyright. The appearance of any technical data or editorial material in
this publication document does not constitute endorsement, warranty, or guaranty by ASHRAE of any product,
service, process, procedure, design or the like and ASHRAE expressly disclaims such. Permission to republish
or redistribute must be obtained from the MOS.
necessary for conformance to the standard. It has not been processed according to the ANSI requirements
for a standard and may contain material that has not been subject to public review or a consensus process.
Unresolved objectors on informative material are not offered the right to appeal at ASHRAE or ANSI.)
FOREWORD
Tables 6.8.1-13 and 6.8.1-14 of ANSI/ASHRAE/IES Standard 90.1-2019 address the minimum efficiency
requirements for Electrically Operated DX-DOAS Units, Single-Package and Remote Condenser, without
and with Energy Recovery, respectively. Presently, these minimum efficiency requirements are based on
ISMRE for dehumidification and ISCOP for heating, referencing AHRI 920-2015, Performance Rating
of Direct Expansion-Dedicated Outdoor Air System Units.
In 2020, AHRI published a significant revision to the test procedure AHRI 920-2020 with Addendum 1,
Performance Rating of Direct Expansion-Dedicated Outdoor Air System Units (available for free on
AHRI’s website, here:
https://ahrinet.org/App_Content/ahri/files/STANDARDS/AHRI/AHRI_Standard_920_I-
P_2020_add1.pdf )
AHRI 920-2020 is technically superior to AHRI 920-2015. AHRI 920-2020 transitioned the primary
metric from ISMRE to ISMRE2. DX-DOAS units are no longer required to reheat to “neutral air” (70-75
°F) on the supply airstream. With changed standard rating conditions, a name change was important to
avoid confusion with ISMRE calculated using the 2015 standard. ISMRE2 calculation weights used with
MRE values at conditions A, B, C, and D are different than ISMRE’s. Conditions C and D vary between
the 2015 and 2020 versions and the return air condition changes at Point D are unfavorable with ERV.
Supply Air Fan (SAF) external static pressure (ESP) increased about 0.6 in.wg., or 150-percent, between
the 2015 and 2020 versions depending on unit size. Return air flow (RAF) ESP, required with ERV,
increased static pressure similarly to SAF ESP. It should also be noted that part-load unloading
requirements are much more demanding. A Cd penalty of 35-percent is applied whenever compressor
capacity cannot be reduced to match load. Excess moisture removal capacity beyond the design leaving
dew point is no longer credited at part load conditions.
Likewise, ISCOP has transitioned to ISCOP2. ISCOP2 includes a new COPDOAS metric, which essentially
includes the same changes as the transition from ISMRE to ISMRE2.
Developing a crosswalk between ISMRE and ISCOP to ISMRE2 and ISCOP2 has been difficult because
of the testing difficulties with 920-2015 and the many changes between the editions. AHRI has held
approximately 23 meetings since June 2020 to discuss the crosswalk with relevant stakeholders, including
DOE contractors and California utility consultants (CA IOUs). During the process, AHRI collected 21
data points that were < 324 lb/hr MRC and had both ISMRE & ISMRE2 ratings. DOE gathered four data
points and the CA IOUs collected one data point. All AHRI data collected was provided to DOE
consultant, Guidehouse, under a non-disclosure agreement to protect sensitive technical information.
ANSI Standards
Except 111 pages
While work was ongoing to map the relationship between ISCOP to ISCOP2 through the AHRI group,
the U.S. Department of Energy (DOE) and DOE consultants continued a separate analysis cumulating in
the February 1, 2022, publication of a proposed rule to adopt energy conservation standards. 1
To ensure marketplace consistency with DOE’s proposed adoption of ISMRE2 and ISCOP2 levels based
on AHRI 920-2020, this addendum proposes the following changes:
1. Updates existing ASHRAE Standard 90.1-2019 ISMRE and ISCOP standards to ISMRE2 and
ISCOP2 standards using the crosswalk analysis proposed by DOE in the February 1, 2022, notice
of proposed rule for eight equipment classes.
2. For the four equipment classes covered by 90.1, but not considered by DOE, this addendum
updates existing ASHRAE Standard 90.1-2019 ISMRE and ISCOP standards to ISMRE2 and
ISCOP2 standards based on an industry analysis. Four of these equipment classes will be combined
into two.
3. Adds AHRI Standard 920-2020 to Section 12, Normative References
Economic Analysis
This is an update to the test procedure referenced and will have no economic impact.
[Note to Reviewers: This addendum makes proposed changes to the current standard. These changes are
indicated in the text by underlining (for additions) and strikethrough (for deletions) except where the reviewer
instructions specifically describe some other means of showing the changes. Only these changes to the current
standard are open for review and comment at this time. Additional material is provided for context only and is
not open for comment except as it relates to the proposed changes.]
Addendum cv to ANSI/ASHRAE/IES Standard 90.1-2019

Make the following changes to Tables 6.8.1-13 and 6.8.1-14 (IP)
Table 6.8.1-13 Electrically Operated DX-DOAS Units, Single-Package and Remote Condenser, without Energy Recovery— Minimum
Efficiency Requirements
Equipment Type Subcategory or Rating Condition Minimum Efficiency Test Procedure
Air cooled 4.0 3.8 ISMRE2 AHRI 920

(dehumidification mode)
Air source heat pumps 4.0 3.8 ISMRE2 AHRI 920
Water cooled Cooling tower condenser water 4.9 4.7 ISMRE2 AHRI 920
Chilled Water 6.0 3.8 ISMRE2
Air source heat pump 2.7 2.05 ISCOP2 AHRI 920
(heating mode)
Water source heat pump Ground source, closed and open loop a 4.8 4.6 ISMRE2 AHRI 920
Ground-water source 5.0 ISMRE
Water source 4.0 3.8 ISMRE2
Water source heat pump Ground source, closed and open loop a
2.0 2.13 ISCOP2 AHRI 920
(heating mode)
Ground-water source 3.2 ISCOP
Water source 3.5 2.05 ISCOP2
1
87 FR 5560 (February 1, 2022) https://www.regulations.gov/document/EERE-2017-BT-STD-0017-0008
ANSI Standards
Except 111 pages
a. For minimum efficiency compliance purposes, open loop systems shall be rated using closed-loop test conditions.
Table 6.8.1-14 Electrically Operated DX-DOAS Units, Single-Package and Remote Condenser, with Energy Recovery— Minimum

(heating mode)
3.8 3.5 ISCOP2 AHRI 920
(heating mode)
…
12 Normative References
Reference Title
ANSI/AHRI 920-20152020 with Addendum 1 Performance Rating of DX-Dedicated Outdoor Air

System Units
Make the following changes to Tables 6.8.1-13 and 6.8.1-14 (SI)

Table 6.8.1-13 Electrically Operated DX-DOAS Units, Single-Package and Remote Condenser, without Energy Recovery— Minimum

(heating mode)
2.0 2.10 ISCOP2 AHRI 921
(heating mode)
ANSI Standards
Except 111 pages
Table 6.8.1-14 Electrically Operated DX-DOAS Units, Single-Package and Remote Condenser, with Energy Recovery— Minimum

(heating mode)
3.8 3.50 ISCOP2 AHRI 921
(heating mode)
a. For minimum efficiency compliance purposes, open loop systems shall be rated using closed-loop test
conditions.
12 Normative References
Reference Title
ANSI/AHRI 921-20152020 with Addendum 1 Performance Rating of DX-Dedicated Outdoor Air

System Units
BSR/ASHRAE/IES Addendum cw

Proposed Addendum cw to
comment database. The draft is subject to modification until it is approved for publication by the Board of Directors and ANSI. Until
this time, the current edition of the standard (as modified by any published addenda on the ASHRAE website) remains in effect. The
current edition of any standard may be purchased from the ASHRAE Online Store at www.ashrae.org/bookstore or by calling 404-
636-8400 or 1-800-727-4723 (for orders in the U.S. or Canada).
The appearance of any technical data or editorial material in this public review document does not constitute endorsement, warranty,
or guaranty by ASHARE of any product, service, process, procedure, or design, and ASHRAE expressly disclaims such.
document must be obtained from the ASHRAE Manager of Standards, 180 Technology Parkway Peachtree Corners, GA 30092.
Phone: 404-636-8400, Ext. 1125. Fax: 404-321-5478. E-mail: standards.section@ashrae.org.

BSR/ASHRAE/IES Addendum cw to ANSI/ASHRAE Standard 90.1-2019, Energy StandardAction
© 2021 ASHRAE
(This foreword is not part of this standard. It is merely informative and does not contain requirements necessary
for conformance to the standard. It has not been processed according to the ANSI requirements for a standard
and may contain material that has not been subject to public review or a consensus process. Unresolved objectors
on informative material are not offered the right to appeal at ASHRAE or ANSI.)
FOREWORD
This addendum is being proposed in response to a change in the IBC 2021 identified by the IALD. The IBC
2021 added a requirement that along exit access stairways the illumination level must be a minimum of 10 fc
(108 Lx) at the walking surface when the stairway is in use. Prior to this the illumination level for means of
egress was required to be at least 1 fc (11 Lx) at the walking surface. This is a potential 10-fold increase in
lighting in exit stairways.
To maintain current energy efficiency levels and to limit trading of this power to non-stair spaces, we propose
to create a new additional lighting power allowance for exit access stairways. The additional power is limited
to this space only and prevents the trading of power to other spaces.
No cost-effectiveness analysis was completed because this addendum proposes an additional lighting power
allowance which is optional. In addition, the addendum is in response to a change in the model building code.
It is anticipated that this will increase cost in exit stairways.
BSR/ASHRAE/IES Addendum cw to ANSI/ASHRAE Standard 90.1-2019, Energy StandardAction
Addendum cw to 90.1-2019
Modify the standard as follows (IP and SI Units)
9.5.2.2 Additional Lighting Power
[…]
(d) For interior exit stairways in which lighting is designed for egress and to provide 10 fc (108 Lx) minimum at the
walking surface when the stairway is in use, additional lighting power shall be allowed per Table 9.5.3.1.
Table 9.5.2.2 Additional Lighting Power
Section Description Additional Lighting Power Required Controls

9.5.2.2(a) Decorative 0.70 W/ft (7.53 W/m )
2 2
9.4.1.1(j)
9.5.2.2(b) Retail Sales 750 W + (Retail Area 1 × 0.40 W/ft2) + 9.4.1.1(j)
(Retail Area 2 × 0.40 W/ft2) + (Retail
Area 3 × 0.70 W/ft2) + (Retail Area 4 ×
1.00 W/ft2)
750 W + (Retail Area 1 × 4.30 W/ m2)

+ (Retail Area 2 × 4.30 W/m2) +
(Retail Area 3 × 7.53 W/m2) + (Retail
Area 4 × 10.76 W/m2)
9.5.2.2(c) Video Conferencing 0.50 W/ft2 (5.53 W/m2) See Table 9.5.2.1 space
types for required
controls
9.5.2.2(d) Interior exit stairway 2.0 W/ft2 (21.52 W/m2) 9.4.1.1(g), 9.4.1.1(j)
…
Tracking #41i11r2 Revision to NSF/ANSI 41-2019

© 2022 NSF Issue 11, Revision 2 (June 2022)
Not for publication. This document is part of the NSF standard development process. This draft
text is for circulation for review and/or approval by an NSF Standards Committee and has not
been published or otherwise officially adopted. All rights reserved. This document may be
reproduced for informational purposes only.
[Note – the recommended changes to the standard which include the current text of the relevant
section(s) indicate deletions by use of strikeout and additions by grey highlighting. Rationale
Statements are in italics and only used to add clarity; these statements will NOT be in the finished
publication.]
NSF/ANSI Standard
for Wastewater Technology –
Non-liquid Saturated Treatment Systems

.
.
.
1 General
1.1 Purpose
The purpose of this Standard is to establish minimum materials, design and construction, and performance
requirements for non-liquid saturated treatment systems. It is intended to protect public health and the
environment as well as minimize nuisance factors. This Standard also specifies the minimum literature that
manufacturers shall supply to authorized representatives and owners.
1.2 Scope
This Standard contains minimum requirements for treatment systems that do not utilize a liquid saturated
media as a primary means of storing or treating human excreta or human excreta mixed with other organic
household materials. It addresses treatment systems that treat both solid and liquid waste, as well as those
that only treat solid waste. Management methods for the end products of these systems are not addressed
by this Standard.
System components covered under other NSF or NSF/ANSI standards or criteria shall also comply with the
requirements contained in those other standards. This Standard shall in no way restrict new system
designs, provided such designs meet the minimum specifications described herein.
1.3 Systems classification
For the purpose of this Standard, systems are classified according to the use environment for which they
are intended to be installed. The systems classifications identified in this Standard are residential systems,
commercial systems, day-use systems, and cottage systems. Performance testing and evaluation
requirements for each of these systems classifications are described herein.
.
.
.
Page 1 of 5

11 New system (“controlled”) performance testing and evaluation

.
.
.
11.1 Loading patterns
11.1.1 Residential systems
Residential systems are those systems that are intended for use in home settings, apartment complexes
and other settings that receive daily residential use.
A residential system shall be subjected to the loading that is representative of the 24 h excrement cycles
of humans. A population equivalent (p.e.) shall be defined as 1.2 fecal events and 4 urine events per person
per day. The system shall be loaded according to each of the eight loading patterns described in this
section. These loading patterns shall be conducted sequentially in the order described. Annex C, figure 4
illustrates graphically how these loading patterns shall be conducted.
NOTE 1 — For those loading patterns that are conducted for seven or more days, the actual loading for both
feces and urine may vary by ± 10% on a weekly basis. For loading patterns that are conducted for less than
7 d, the actual loading for both feces and urine may vary by ± 10% over the course of each loading pattern.
NOTE 2 — Design rated capacity (DRC) is calculated by multiplying the manufacturer’s population rating (the
maximum number of people the system is designed to service in one 24 h period) by the p.e. for both urine
and feces.
a) Start-up: The system shall be installed, started, loaded, and operated according to the manufacturer’s
instructions. The duration of the start-up period shall be specified by the manufacturer.
b) Preliminary routine operation: Following start-up, the system shall be loaded daily for 30 d at 100% of
the DRC. See example calculations in Figure 2.
c) Vacation stress: A vacation stress shall be simulated by 17 consecutive days of nonuse.
d) Routine operation: The system shall be returned to routine operation by loading the system daily for
7 d at 100% of the DRC.
e) Overload stress: An overload stress shall be simulated by loading at 200% of DRC, applied over an
8 h period, during each 24 h/d for 5 d.
f) Routine operation: The system shall be returned to routine operation by loading the system daily for 7
d at 100% of the DRC.
g) Party stress: The party stress is a hydraulic overload stress in excess of the routine operation. This
stress shall be simulated by loading urine at the rate of 500% of the DRC for one 8 h period. It is not
necessary to load the system with feces during this stress. However, if feces loading does occur, it shall
not exceed 100% of the DRC. Figure 3 demonstrates how the urine loading shall be conducted.
Routine operation: The system shall be returned to routine operation by loading the system daily at
100% of the DRC. This loading pattern shall continue for the duration of the 6 mo test period and shall
not be less than 3 mo in duration.
Page 2 of 5

The total number of fecal events and urine events that are to be loaded
weekly during the 30-d preliminary routine operation pattern is
demonstrated below.
Manufacturer’s population rating = 10 people
1.2 f. e. 7 d 84 f. e.
10 person x x =
(person) (d) wk wk
f.e. = fecal event
With the ± 10% allowable deviation, the total loading shall be between
76 and 92 fecal events per week.
4 u. e. 7 d 280 u. e.
10 person x x =
(person) (d) wk wk
u.e. = urine event
With the ± 10% allowable deviation, the total loading shall be between
252 and 308 urine events per week.
Figure 2 – Preliminary routine operation
Manufacturer’s population rating = 10 people
10 persons 4 u. e. 1 67 u. e.
x x 500% x d =
8 hr party (person) (d) 3 8 hr party
These 67 urine events are added to the 40 urine events that the
system would receive during normal daily usage (100% of the DRC) to
yield a total loading of 107 urine events. With the ± 10% allowable
deviation, the total loading shall be between 96 and 118 urine events.
Figure 3 – Party stress
11.1.2 Commercial use systems
Commercial use systems are intended for use in a workplace environment where the toilet system is
expected to accommodate a rated number of individuals during a typical 40-hour work week. Commercial
use systems are tested as residential systems, however since they are used 64.3% fewer hours per week,
they are rated at 2.8 times the residential systems rating.
NOTE - If the systems are to be used beyond a typical 40-hour work week or there is potential for additional
loading, the capacity rating will need to be re-evaluated. Therefore, the manufacturer should be contacted to
provide the appropriate guidance.
Page 3 of 5

11.1.23 Day-use systems
Day-use systems are those systems that are not intended for overnight use in parks, roadside stops,
commercial offices, schools, and other similar settings.
A day-use system shall be subjected to the loadings representative of day-use installations. The system
shall be loaded according to each of the four loading patterns described in this section. These loading
patterns shall be conducted sequentially in the order described. Annex C, figure 5 illustrates graphically
how these loading patterns shall be conducted.
The manufacturer’s designated population rating is defined as the total number of uses or the combination
of the total number of urine events and fecal events the system is designed to handle in a 24 h period.
NOTE — Day-use systems typically receive a greater proportion of urine to feces than residential and cottage
systems. Efforts should be made during testing to assure that the relative proportion of six urine events to one
fecal event is maintained or exceeded during each of the loading patterns described in this section.
For those loading patterns that are conducted for seven or more days, the actual loading for both feces and
urine may vary by ± 10% on a weekly basis. For loading patterns that are conducted for less than 7 d, the
actual loading for both feces and urine may vary by ± 10% over the course of each loading pattern.
a) Start-up: The system shall be installed, started, loaded, and operated according to the manufacturer’s
b) Preliminary routine operation: Following start-up, the system shall be loaded daily at 100% of the
manufacturer’s designated population rating (the total number of uses, combined urine and fecal
events, the system is designed to handle in a 24 h period) for five consecutive days each week for a
period of
1 mo (30 d). Two days of overload stress shall be conducted on the two remaining days of each week.
Overload shall be conducted by loading the system at 200% of the manufacturer’s designated
population rating.
c) Peak season stress: Peak season stress shall be simulated by loading the system at 200% of the
manufacturer’s designed population rating. This loading shall be conducted daily for 14 consecutive
days.
d) Routine operation: The system shall be returned to routine operation by loading the system daily at
100% of the manufacturer’s designated population rating for five consecutive days per week. Two days
of overload stress shall be conducted on the two remaining days of each week. Overload shall be
conducted by loading the system at 200% of the manufacturer’s designated population rating. This
loading pattern shall continue for the duration of the 6 mo test period and shall not be less than 3 mo
in duration.
11.1.34 Cottage (seasonal) systems
Cottage systems are those systems that are intended for occasional use. Cottage settings can include
vacation homes, weekend cottages, and cabins.
A cottage system shall be subjected to the loading pattern representative of the 24 h excrement cycles of
humans. One population equivalent (p.e.) shall be defined as approximately 1.2 fecal events and 4 urine
events per person per day. The system shall be loaded according to each of the 6 loading patterns
described in this section. These loading patterns shall be conducted sequentially in the order described.
Page 4 of 5

Annex C, figure 6 illustrates graphically how these loading patterns shall be conducted.
NOTE — For those loading patterns that are conducted for 7 or more d, the actual loading for both feces and
urine may vary by ± 10% on a weekly basis. For loading patterns that are conducted for less than 7 d, the
actual loading for both feces and urine may vary by ± 10% over the course of each loading pattern.
a) Start-up: The system shall be installed, loaded, and operated according to the manufacturer’s
b) Preliminary routine operation: Following start-up, the system shall be loaded at 100% of the DRC for 2
consecutive d each week for a period of 2 mo. Five d of no loading shall be conducted on the 5
remaining d of each week.
NOTE — For an example of how to calculate daily loadings based on DRC and p.e., refer to Note 2 and Figure
2 in 11.1.1.
c) Peak season stress: Peak season stress shall be simulated by 14 consecutive d of use. For the first
week of peak season stress, the system shall be loaded at 100% of the DRC for 5 consecutive d
followed by 2 consecutive d of loading at 200% of the DRC. During the second week of peak season
stress, this pattern of loading at 100% of the DRC for 5 consecutive d and 200% of the DRC for 2
consecutive d shall be repeated.
d) Routine operation: The system shall be returned to routine operation by loading at 100% of the DRC
for 2 consecutive d each week. The system shall receive no loading on the 5 remaining d of each week.
This loading pattern shall continue for a total of 2 weeks.
e) Seasonal stress: The seasonal use stress shall be simulated by 42 consecutive d of use at 100% of
the DRC.
f) Routine operation: The system shall be returned to routine operation by loading at 100% of the DRC
for 2 consecutive d each week. The system shall receive no loading on the 5 remaining d of each week.
This loading pattern shall continue for the duration of the 6-mo test period and shall not be less than 30
d in duration.
.
.
.
Page 5 of 5

Not for publication. This document is part of the NSF standard development process. This draft text
is for circulation for review and/or approval by an NSF Standards Committee and has not been
published or otherwise officially adopted. All rights reserved. This document may be reproduced
for informational purposes only.
[Note – the recommended changes to the standard which include the current text of the relevant
section(s) indicate deletions by use of strikeout and additions by grey highlighting. Rationale
Statements are in italics and only used to add clarity; these statements will NOT be in the finished
publication.]
NSF/ANSI Standard
for Wastewater Technology –
Onsite Residential and Commercial

Water Reuse Treatment Systems
.
.
.
2 Normative references
The following documents contain requirements that, by reference in this text, constitute requirements of this
Standard. At the time of publication, the indicated editions were valid. All of the documents are subject to
revision and parties are encouraged to investigate the possibility of applying the most recent editions of the
documents indicated below. The most recent published edition of the document shall be used for undated
references.
ANSI/AWS D.1.1/D1.1M:2015 2020, Structural Welding Code – Steel, with Errata 2
ANSI/AWS D1.3/D1.3M:2018, Structural Welding Code – Sheet Steel, 5th Edition, with Errata2
APHA/AWWA/WEF, Standard Methods for the Examination of Water and Wastewater (hereinafter
referred to as Standard Methods)1
NFPA 70®, National Electrical Code® (NEC®), 20113
ISO 12103-1, Road Vehicles – Test Dust for Filter Evaluation4
Page 1 of 1
BSR/UL 428B, Standard for Safety for Electrically Operated Valves for Diesel Fuel,
Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up To 20
Percent (B20), Kerosene, and Fuel Oil
1. ANSI approval of the revisions covering the a) deletion of redundant requirements in UL

428B, and b) Operations Test.
1.1 Electrically operated valves are intended for use with the following:
a) Kerosene formulated in accordance with the Standard Specification for Kerosine,

ANSI/ASTM D3699., and
b) Fuel oil (heating oil) formulated in accordance with the Standard Specification for Fuel Oils,
ANSI/ASTM D396, and.
c) Diesel fuel, which includes renewable diesel and diesel/biodiesel blends with nominal biodiesel
concentrations up to 5 percent (B0 – B5) formulated in accordance with the Standard Specification
for Diesel Fuel Oils, ANSI/ASTM D975, and
d) Diesel/biodiesel, renewable diesel/biodiesel blends, blends with nominal biodiesel concentrations

from 5 percent up to 20 percent (B6 – B20) formulated in accordance with the Standard Specification
for Diesel Fuel Oil, Biodiesel Blends (B6 – B20), ANSI/ASTM D7467, and/or
e) Biodiesel (B99.9/B100) formulated in accordance with the Standard Specification for Biodiesel
Fuel Blend Stock (B100) for Middle Distillate Fuels, ANSI/ASTM D6751.
4.2.1.4 Nonmetallic materials in contact with the fuels anticipated by these requirements shall not be
constructed of the following:
a) Polysulfide rubber;
b) Ethylene propylene diene monomer (EPDM) rubber;
c) Methyl-Methacrylate;
d) Polyvinyl Chloride (PVC); or
e) Nylon 6/6; or
f) Polyurethane as elastomer.
6.1 General
6.1.1 The test outlined in 6.2 – 6.4 is to be performed on one or two samples of the valve, with one
sample for each rating. If the product is rated for use with diesel fuel, diesel/biodiesel blends with
biodiesel concentrations up to 20 percent (B20), kerosene, or fuel oil, then the test shall be performed
using the FB25a test fluid. If the product is rated for use with a biodiesel fluid (B99.9/B100), then the test
shall be performed using the B100a test fluid. See Supplement SB.
11.1 The following information shall be permanently marked on each valve:
a) Valves shall be marked to indicate the fuel rating for which they are intended. The marking shall be
"Diesel Fuel" or "B5" for valves rated for diesel fuel only, shall be "B20" for valves rated for diesel
fuel and diesel fuel/biodiesel blends with nominal biodiesel concentrations up to 20 percent
biodiesel (B0 – B20), shall be "B99.9/B100" for valves rated for biodiesel fuel, “Kerosene” for valves
rated for kerosene, or “Fuel Oil” for valves rated for use with fuel oil. This marking shall be
prominently displayed to identify the valve.
SUPPLEMENT SB – Test Fluids
SB.1 Representative Aggressive Combustible Test Fuel Mixtures
There are two test fluids that are applicable for tests in this standard. The fluids are designated as FB25a
and B100a. The test fluids represent chemical and physical characteristics of the fuels covered by this
standard. See 1.2. The aggressive biodiesel contains elements that are used to represent contaminants
that can be found in actual use and are used to help represent the worst case test fluid.
The test fluid designations represent the following:
FB25a – An aggressive test fluid containing 25 percent biodiesel with aggressive elements:
F = Reference Fuel F (No. 2 Grade S500) in accordance with the Standard Specification for
Standard Test Method for Rubber Property – Effects of Liquids, ASTM D471.
B = Biodiesel (100 percent Soy feedstock) in accordance with the Standard Specification for
Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, ASTM D6751.
a = Aggressive components to be mixed with B to form B100 as an aggressive Biodiesel

Stock.
B100a – An aggressive test fluid containing 100 percent biodiesel with aggressive elements:
B = Biodiesel (100 percent Soy feedstock) in accordance with the Standard Specification for
Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, ASTM D6751.
a = Aggressive components to be mixed with B to form B100 as an aggressive Biodiesel

Stock.
The aggressive biodiesel containing <0.5 percent volume combined water and decanoic acid shall be based
on the approximate formula below1 to achieve a final 1.00 ±0.02 acid number of the mixture when measured
in accordance with the Standard Test Method for Acid Number of Petroleum Products by Potentiometric
Titration, ASTM 664.
0.2 percent volume acid water [2.60 g decanoic acid crystals / 1000 g of deionized water]2
The resulting solution, after mixing the above elements, shall have an acid number of 1.0 ±0.02. After the
measurement is determined, an acid number not within the specification of 1.0 ±0.02 shall be adjusted with
additional biodiesel fuel or decanoic acid added until the acid number is 1.0 ±0.02.
These two fluids may be used to condition samples as noted in each specific test that indicates that these
fluids are to be used. The test fluids are to be prepared just prior to use to minimize effects on the test fluid.
The aggressive biodiesel is corrosive and changes can occur to the solution from interactions with the
storage and transfer containers. Exposure to air and or moisture may also effect the test fluid.
Products intended to be rated for use with diesel fuel or diesel/biodiesel fuel blends with nominal biodiesel
concentrations up to 20 percent (B0 – B20) shall be evaluated using the FB25a test fluid as the only
applicable test fluid. Products intended to be rated for use with biodiesel fuel (B99.9/B100) shall be
evaluated using the B100a test fluid. For products evaluated using the FB25a test fluid or B100a test fluid,
one sample is required to be conditioned in accordance with the test sequence in 6.5.1.
1 Note the formula is approximate since each source of biodiesel may have variations in specific gravity and initial acid number that
require measurement and final adjustment as specified.
2Note decanoic acid crystals are insoluble in water, so are recommended to be finely ground and thoroughly mixed in the overall
solutions before acid number measurements are taken.
BSR/UL 705, Standard for Safety for Power Ventilators
2. Update internal wiring for hazardous voltage
PROPOSAL
2.7 DUCT FAN – A straight-through ventilator installed within a duct or provided with
flanges for connection to a duct and which may be used with heated air within the duct.
3. Addition of solid state speed controller test requirements
PROPOSAL
31A Ventilator motors of permanent split capacitor (PSC) or shaded pole type and
provided with solid-state speed controls
BSR/UL 1581, Standard for Safety for Reference Standard for Electrical Wires, Cables,
and Flexible Cords
PROPOSAL(S)
11 Requirements for Copper-Clad Aluminum Conductors
11.1 The requirements in this section (11.1) cover copper-clad aluminum conductors. Copper-clad
aluminum conductors shall be drawn from copper-clad aluminum rod. The copper shall be metallurgically
bonded to the aluminum core, shall occupy 10 percent or more of the cross section of a solid conductor
and of each wire (strand) of a stranded conductor, and shall be concentric with the aluminum. The
thickness of the copper shall not be less than 2.56 percent of the diameter of the solid conductor or wire
(strand) as determined by microscopic examination of a polished right cross section of the round strand or
round solid conductor. The tensile strength of a finished copper-clad aluminum conductor tested as a unit
or of the wires (strands) from a finished stranded copper-clad aluminum conductor and of a finished solid
copper-clad aluminum conductor shall not exceed 20,000 lbf/in2 or 138 MPa when specimens are tested
at the speed and using the equipment and procedure indicated in ASTM B 566-04a. The elongation of the
same specimens shall not be less than 15 percent in 10 inches or 250 mm.
NEW SECTION
12 Requirements for Copper-Clad Aluminum Conductors Used in Building Wire
Material Requirement
12.1 The requirements in this section cover finished, copper-clad aluminum conductors and the individual
strands of a finished copper-clad aluminum conductor. Copper-clad aluminum conductors shall be drawn
from copper-clad aluminum rod. Copper-clad aluminum strands shall be limited to sizes 0.02257 - 0.2043
in diameter (23 – 4 AWG).
12.2 The aluminum core shall be an AA8000 series alloy as described in Section 10. The elemental
analysis of the aluminum core shall be determined in accordance with ASTM E227. The results of the
elemental analysis on the aluminum core used shall meet the requirements for an AA 8000 series alloy as
described in UL 44, Chemical composition of ACM, AA 8000 series aluminum alloy conductor materials.
12.3 The copper shall be high-conductivity, oxygen-free copper with an oxygen content not to exceed
0.001% meeting the requirements of ASTM B 152. The copper shall be metallurgically bonded to the
aluminum core as determined by the methods in 12.12 and 12.14. The copper shall occupy 10 percent or
more by volume of the cross section of a solid conductor and of each wire (strand) of a stranded
conductor as determined by the methods in 12.17. The thickness of the copper shall not be less than 4.0
percent of the radius of the solid conductor or wire (strand).
Test Requirement
12.4 Tensile strength and elongation test
12.4.1 The tensile strength of a finished copper-clad aluminum conductor or of the wires (strands) from a
finished stranded copper-clad aluminum conductor and of a finished solid copper-clad aluminum
conductor shall not exceed 20,000 lbf/in2 or 138 MPa. The elongation of the same specimens shall not be
less than 15 percent. The tensile and elongation of a finished conductor or an individual strand shall be
tested in accordance with the test, Physical properties of conductors (tensile strength, elongation at
break, and ultimate strength) as described in UL 2556. The test shall be conducted at a speed of 12
in/min (305 mm/min), with 10 inches (254 mm) between the benchmarks.
12.5 DC resistance test
12.5.1 The DC resistance of the finished copper-clad aluminum conductor shall not exceed 0.02743
Ω·mm2/m when tested in accordance with the method, DC Resistance as described in UL 2556.
12.6 Density test
12.6.1 The density of the copper-clad aluminum shall be 3.32 g/cm3 (0.1200 lb/in3) nominal when the
conductor material is tested using the method described in Annex B of UL 2556.
12.7 Diameter Measurement
12.7.1 The diameter of the solid conductor or any individual strands from a stranded conductor shall meet
the requirements in Table 20.1 when measured in accordance with the test Conductor Diameter as
described in UL 2556.
12.8 Adhesion test
12.8.1 A specimen of finished copper-clad aluminum conductor shall be fixed in a vice or other
securement means. The free end of the conductor shall be flexed back and forth thru 180 degrees using
any suitable means until the conductor breaks. The fractured area (not including the clamped area) shall
be examined for delamination using magnification of 10X. There shall be no delamination between the
copper and the aluminum.
12.9 Cohesion Test
12.9.1 A specimen of finished copper-clad aluminum conductor shall be fixed in a clamp or other
securement means. The conductor shall be twisted three complete turns in one direction, untwisted to the
original position, twisted three turns in the opposite direction and finally returned to the original position.
The length over which the twisting occurs shall be 15 times the diameter of wire under test. A longer
length specimen may be used to facilitate the test. If a longer length is used, the number of twists shall
be increased accordingly.
12.9.2 After completion of the twists, the specimen shall be examined for seams or splits in the copper
using 10X magnification. There shall be no seams or splits in the copper.
12.10 Copper Construction
12.10.1 The surface of wire shall be free from pits, slivers, exposed aluminum, or other imperfections
when examined under normal vision.
12.10.2 Three specimens of copper-clad aluminum, each specimen located at least 10 feet from the
previous specimen, shall be mounted (in a suitable material if needed) so that a polished, right cross
section of the conductor can be obtained. The minimum thickness at any point (MinAAP) shall be located
and measured. The diameter of the overall conductor (Dc) and the diameter of the aluminum core (Da)
shall be each be measured at three locations and averaged. The three measurement locations shall be at
the maximum diameter, the minimum diameter and at a location bisecting the maximum and minimum
diameters. The measurements shall be made using a micrometer microscope with a resolution and
accuracy of 0.001 mm (0.0001 in)
12.10.3 The thickness of copper Tc shall be calculated using
𝐷𝐷𝐷𝐷
𝑇𝑇𝑇𝑇 = 100 ( 𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀𝑀/( )
2
Where: MinAAP – Minimum thickness at any point of copper cladding

Dc – Average overall conductor diameter
The ratio of copper with respect to the overall radius Rca shall not be less than 4 % of the radius of the
overall conductor, where:
𝑇𝑇𝑇𝑇
𝑅𝑅𝑅𝑅𝑅𝑅 = 100 𝑥𝑥(
𝐷𝐷𝐷𝐷/2
12.10.4 The percent copper volume %C𝑣𝑣 shall be calculated using
𝐷𝐷𝑐𝑐 2 − 𝐷𝐷𝑎𝑎2
%𝐶𝐶𝐶𝐶 = 100 𝑥𝑥 ( )
𝐷𝐷𝑐𝑐 2
The copper shall occupy 10 percent or more by volume of the cross section
13 thru 19 Reserved for Future Use

BSR/UL 2034, Standard for Safety for Single and Multiple Station Carbon Monoxide Alarms
1. New Commercial Vehicles Definition
PROPOSAL
87.1 An alarm shall be permanently marked on a Class IIIC marking material with the following
information unless specifically indicated that it appears on the installation wiring diagram. The marking
shall be in a contrasting color, finish, or equivalent. Unless the letter height is specified, all markings shall
be at least 3/64 inch (1.2 mm) high.
i) The following warning shall be placed on the carbon monoxide alarm. The warning label shall
be of Class IIIC marking material. The hazard symbol and letters used for the word "WARNING"
shall be boldfaced type having a minimum uppercase letter height of 0.120 inch (3.05 mm). The
minimum vertical spacing between lines of type shall be 0.046 inch (1.17 mm). (These
dimensions correspond to 12 point type.) Lowercase letters shall be compatible with the
uppercase letter specification.
"WARNING"
"Carbon Monoxide cannot be seen or smelled but can kill you.
If alarm signal sounds:
1) Operate reset/silence button.
2) Call your emergency services (fire department or 911).
3) Immediately move to fresh air – outdoors or by an open door/window."
(for commercial vehicles)
"Carbon Monoxide cannot be seen or smelled but can kill you.
If alarm signal sounds:
1) Immediately move to fresh air – outdoors or by an open door/window.
2) Contact your supervisor."
6. New Velocity Sensitivity Test
PROPOSAL
44A.2 Duct Test Equipment
44A.2.1 The following items refer to Figure 44A.1. Alternate configurations may be used provided that
they produce a homogeneous mixture of carbon monoxide across the detector head or gas sampling
tubes and are adjustable from 300 to 4000 fpm (1.52 to 20.3 m/s). At the carbon monoxide alarm test
location the cross section is to be 1 square feet (0.093 m2) and the alarm is to be located at least eight
duct widths downstream [8 feet (2.44 m)] from the nearest bend.
d) Air Stream Straightenerb - Aluminum honeycomb, 1/4 inch (6.4 mm) cell size. Overall
dimensions are to be 12 by 12 by 3 inches (304 by 304 by 76 mm). An equivalent honeycomb
shall be employed only when the cell size length-to-diameter ratio greater than 10.
b
Expanded Commercial Grade Honeycomb 1/4 CGH-5.2N American Cyanamid Co., is intended for this
purpose.
BSR/UL 2594, Standard for Safety for Electric Vehicle Supply Equipment
1. The Proposed Third Edition of the Standard for Electric Vehicle Supply Equipment, ANCE J-
677/CSA 280/UL 2594
PROPOSAL
1.1 This Standard covers applies to conductive electric vehicle (EV) supply equipment with a primary
source voltage of 1000 V ac or less, with a frequency of 50 or 60 Hz, and intended to provide ac power to
an electric vehicle with an on-board charging unit. This Standard covers electric vehicle supply equipment
intended for use where ventilation is not required.
67.3 UV exposure
67.3.1 The enclosure is considered to comply with this test if at the conclusion of the test method for the
UV Exposure/Weathering Test in Annex A, Ref. No. 21, all the minimum property retention requirements
in Table 28 are met.
72.12 Equipment field-wiring terminals shall be marked with the following:
a) “Use Copper Conductors Only” when the terminal is intended only for connections to copper
wire.
b) “Use Aluminum Conductors Only” or “Use Aluminum or Copper-Clad Aluminum Conductors

Only” when the terminal is intended only for connection to aluminum wire.
c) “Use Copper or Aluminum Conductors” or “Use Copper, Copper-Clad Aluminum, or

Aluminum Conductors” when the terminal is intended for connection to either copper or
aluminum wire.
d) Temperature rating for the field-installed conductors for which the unit has been evaluated.
Annex C – French and Spanish Translations (Informative) Normative for Canada and Mexico, Informative
for the US
72.18 In Canada, a power supply that is intended to be fixed in place to a structure and is provided with
a supply cord in accordance with 12.1.1.1 shall be marked with the following or equivalent: “THE
SUITABILITY OF THE USE OF FLEXIBLE CORD IN ACCORDANCE WITH CE CODE, PART I, RULE 4-
012, IS TO BE DETERMINED BY THE LOCAL INSPECTION AUTHORITY HAVING JURISDICTION”.
In Mexico and the United States, this does not apply.
C1 French and Spanish Translations
72.18 THE SUITABILITY OF THE USE C’EST À L’AUTORITÉ LOCALE LA IDONEIDAD DEL USO DEL
OF FLEXIBLE CORD IN COMPÉTENTE EN MATIÈRE CORDÓN FLEXIBLE DE
ACCORDANCE WITH CE CODE, D’INSPECTION QU’INCOMBE DE ACUERDO CON LA REGLA 4-012
PART I, RULE 4-012, IS TO BE DÉTERMINER SI UN CORDON DE LA PARTE I DEL CEC, SE
DETERMINED BY THE LOCAL SOUPLE PEUT ÊTRE UTILISÉ DETERMINA POR LA
INSPECTION AUTHORITY CONFORMÉMENT À L’ARTICLE 4- AUTORIDAD DE INSPECCIÓN
HAVING JURISDICTION 012 DU CCÉ, PREMIÈRE PARTIE LOCAL QUE TENGA
N/A LA PERTINENCE DE JURISDICCIÓN
L'UTILISATION DE CORDONS N/A
FLEXIBLES SELON LE CODE
CE, PREMIERE PARTIE
WMA 100 Revisions

Recirculation – June 27, 2022
Additional changes submitted by the WMA 100 Consensus Body have been found to be
persuasive and substantive, and have been incorporated into the latest draft of revisions.
This recirculation is limited in scope to these changes and are reflected below.
Cover Page through Section 3. – No Additional Changes
4. REFERENCED STANDARDS AND PUBLICATIONS
ASTM E330/E330M-14(2021) — Standard Test Method for Structural Performance of Exterior

Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E1300-2016 – Standard Practice for Determining Load Resistance of Glass in Buildings
16 CFR 1201-2012 – Safety Standard for Architectural Glazing Materials
AWC-NDS–2018 – National Design Specification for Wood Construction
ANSI/BHMA A156.1-2021 - Butts and Hinges
ANSI/BHMA A156.2-2017 - Bored and Preassembled Locks and Latches
ANSI/BHMA A156.5-2020 - Cylinders and Input Devices for Locks
ANSI/BHMA A156.12-2018 - Interconnected Locks
ANSI/BHMA A156.13-2017 - Mortise Locks
ANSI/BHMA A156.35-2020 – Power Supplies for Electronic Access Control
ANSI/BHMA A156.37-2020 – Multipoint Locks
ANSI/BHMA A156.39-2015 2020 – Residential Locksets and Latches
ANSI/BHMA A156.40-2015 2020 – Residential Deadbolts
Section 5 through end of document – No Additional Changes

SAV5327

Uploaded by

Copyright:

Available Formats

SAV5327

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SAV5327

Uploaded by

Copyright:

Available Formats

PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 W43RD STREET NY, NY 10036

VOL. 53, NO. 27 JULY 8, 2022

American National Standards

© 2022 by American National Standards Institute, Inc. ISSN 0038-9633

Project Initiation Notification System (PINS)

ASTM (ASTM International)

BHMA (Builders Hardware Manufacturers Association)

Project Initiation Notification System (PINS)

ESTA (Entertainment Services and Technology Association)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

IEEE (Institute of Electrical and Electronics Engineers)

IEEE (Institute of Electrical and Electronics Engineers)

Project Initiation Notification System (PINS)

NEMA (ASC C136) (National Electrical Manufacturers Association)

SDI (ASC A250) (Steel Door Institute)

TCNA (ASC A108) (Tile Council of North America)

Project Initiation Notification System (PINS)

Call for Comment on Standards Proposals

Comment Deadline: August 7, 2022

Call for Comment on Standards Proposals

Comment Deadline: August 7, 2022

ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.)

ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.)

Call for Comment on Standards Proposals

Comment Deadline: August 7, 2022

ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.)

ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.)

Call for Comment on Standards Proposals

Comment Deadline: August 7, 2022

NSF (NSF International)

Call for Comment on Standards Proposals

Comment Deadline: August 7, 2022

Call for Comment on Standards Proposals

Comment Deadline: August 7, 2022

Comment Deadline: August 22, 2022

Call for Comment on Standards Proposals

Comment Deadline: August 22, 2022

ANS (American Nuclear Society)

ARESCA (American Renewable Energy Standards and Certification Association)

Call for Comment on Standards Proposals

Comment Deadline: August 22, 2022

ARESCA (American Renewable Energy Standards and Certification Association)