New Product

Pushbutton Switches
A22NN/A22NL

22-mm Pushbutton Switches

Universal Design.
Emphasis on Color Coding, Workability,
and Safety.
Easy to Use
• You can connect up to three Contact Blocks in one stage for
multistage expansion.
• The terminals can be retightened when Contact Blocks are
stacked.
• Contact Blocks can be attached in any direction for easy
assembly.
• Screw terminal structure is compatible with round crimp
terminals.
Safety
• Easy-to-operate lock lever for secure locking.
• Easy-mounting Contact Blocks provide finger protection.
• Different colors of Contract Blocks (NO: blue, NC: orange)
help prevent wiring errors.
Product Lineup
• Meet global safety standards.
• Available with metal or plastic bezels.
• Many color variations.
• Standard-feature degree of protection: IP66, NEMA 4X, and NEMA 13.

Refer to Safety Precautions for All Pushbutton Switch-

es/Indicators and Safety Precautions on page 23.

Button Colors
Red Green Yellow White Blue Black
A22NN-………-N…
Opaque

Non-lighted
Switches Red Green Yellow White Blue Orange
A22NN-………-U…
Transparent

Red Green Yellow White Blue Orange White

When
not lit

Lighted A22NL-………-T…
Switches Transparent Opaque
Red Green Yellow White Blue Orange
white*
When lit

* The colors when the Switches are lit are for transparent white buttons (code: TW) and yellow LED Lamps (code: Y).

1
 A22NN/A22NL
List of Models
Plastic bezels Brushed metal bezels Metal bezels
A22N…-BN A22N…-MN A22N…-RN
Flat Flat Flat

A22N…-BP A22N…-MP A22N…-RP

Projected Projected Projected

A22N…-BG A22N…-MG
Full guard Full guard

A22N…-BM A22N…-MM A22N…-RM

Mushroom Mushroom Mushroom

2
 A22NN/A22NL
Model Number Structure
Model Number Legend - - - - - Shipped as a set that includes the Operation Unit, LED Lamp, Mounting Collar, and Contact Block.
For information on combinations, refer to Ordering Information on pages 4 to 7.

Model Numbers for Sets

(1) (2) (3) (4) (5) (6) (7) (8) (9)
A22N L - BN M - TR A - G 100 - R B
(1) Type (5) Degree of Protection
Code Description Code Description
N Non-lighted A IP66, NEMA 4X, NEMA13
L Lighted
(6) Contact Specification
(2) Bezel Material and Button Shape
Code Description
Code Bezel material Button shape G General purpose
BN Plastic Flat
BP Plastic Projected (7) Contacts
BG Plastic Full guard Unit position
Contact
BM Plastic Mushroom Blocks
Code Non-lighted Lighted
MN Brushed metal Flat
NO NC (1) (2) (3) (1) (2) (3)
MP Brushed metal Projected
100 1 0 NO --- --- NO Lighting Unit ---
MG Brushed metal Full guard
MM Brushed metal Mushroom 002 0 1 --- --- NC --- Lighting Unit NC

RN Metal Flat 101 2 0 NO --- NO NO Lighting Unit NO

RP Metal Projected 102 1 1 NO --- NC NO Lighting Unit NC
RM Metal Mushroom 202 0 2 NC --- NC NC Lighting Unit NC

(3) Switch Action 111 3 0 NO NO NO

112 2 1 NO NO NC
Code Description
122 1 2 NO NC NC
M Momentary
A Alternate 222 0 3 NC NC NC

Note: 1. NO (blue): Normally open, NC (orange):

(4) Button Transparency and Color and (8) LED Lamp Color Normally closed.
2. Refer to the following figure for Unit positions.
LED lamp
Lighted/non-lighted Code (4) Code (8) Transparency Button color
color
NR N Opaque Red
NG N Opaque Green
NY N Opaque Yellow
NW N Opaque White
NA N Opaque Blue
NB N Opaque Black
Non-lighted ---
UR N Transparent Red
UG N Transparent Green (9) LED Lamp Voltage
UY N Transparent Yellow
Code LED Lamp voltage
UW N Transparent White
N Non-lighted
UA N Transparent Blue
A 6 VAC/DC
UO N Transparent Orange
B 12 VAC/DC
TR R Transparent Red Red
C 24 VAC/DC
TG G Transparent Green Green
D 100/110/120 VAC
TY Y Transparent Yellow Yellow
E 200/220/230/240 VAC
Lighted TW W Transparent White White
TA A Transparent Blue Blue
TO O Transparent Orange Orange
TW Y Transparent White * Yellow

* The color is opaque white when the Switch is lit.

■ Specifications: Refer to page 15. ■ Precautions for correct use: Refer to page 23.
■ Dimensions: Refer to page 17. ■ Accessories and tools: Refer to page 13.

3
 A22NN/A22NL
Ordering Information
Model Numbers for Sets - - - - Shipped as a set that includes the Operation Unit, LED Lamp, Mounting Collar, and Contact Block.

Non-lighted, Flat Switches

Momentary action (self-resetting) Alternate action (self-holding) (2)(2) (7)(7)(7)
Appearance Contacts
Model Model Button color Contacts
100
1 A22NN-BNM-(2)(2)A-G(7)(7)(7)-NN A22NN-BNA-(2)(2)A-G(7)(7)(7)-NN
002
Plastic bezels
101
2 A22NN-BNM-(2)(2)A-G(7)(7)(7)-NN A22NN-BNA-(2)(2)A-G(7)(7)(7)-NN 102
202
111
112
3 A22NN-BNM-(2)(2)A-G(7)(7)(7)-NN A22NN-BNA-(2)(2)A-G(7)(7)(7)-NN
122
222
NR: Opaque, red
NG: Opaque, green 100
1 A22NN-MNM-(2)(2)A-G(7)(7)(7)-NN A22NN-MNA-(2)(2)A-G(7)(7)(7)-NN
Brushed metal NY: Opaque, yellow 002
bezels NW: Opaque, white 101
2 A22NN-MNM-(2)(2)A-G(7)(7)(7)-NN A22NN-MNA-(2)(2)A-G(7)(7)(7)-NN NA: Opaque, blue 102
NB: Opaque, black 202
UR: Transparent, red
UG: Transparent, green 111
UY: Transparent, yellow 112
3 A22NN-MNM-(2)(2)A-G(7)(7)(7)-NN A22NN-MNA-(2)(2)A-G(7)(7)(7)-NN
UW: Transparent, white 122
UA: Transparent, blue 222
UO: Transparent, orange 100
1 A22NN-RNM-(2)(2)A-G(7)(7)(7)-NN A22NN-RNA-(2)(2)A-G(7)(7)(7)-NN
002
Metal bezels
101
2 A22NN-RNM-(2)(2)A-G(7)(7)(7)-NN A22NN-RNA-(2)(2)A-G(7)(7)(7)-NN 102
202
111
112
3 A22NN-RNM-(2)(2)A-G(7)(7)(7)-NN A22NN-RNA-(2)(2)A-G(7)(7)(7)-NN
122
222

Lighted, Flat Switches

Momentary action Alternate action (8)
(self-resetting) (self-holding) (2)(2) (7)(7)(7) (9)
Appearance Contacts LED Lamp
Button color Contacts LED Lamp voltage
Model Model color
A22NL-BNM- A22NL-BNA-
Plastic bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-BNM- A22NL-BNA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-BNM- A22NL-BNA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-BNM- A22NL-BNA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-MNM- A22NL-MNA-
Brushed metal
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
bezels 1 TR: Transparent, red R: Red
A22NL-MNM- A22NL-MNA- 002 A: 6 VAC/DC
TG: Transparent, green G: Green
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) B: 12 VAC/DC
TY: Transparent, yellow Y: Yellow
C: 24 VAC/DC
A22NL-MNM- A22NL-MNA- TW: Transparent, white W: White
D: 100/110/120 VAC
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) TA: Transparent, blue 101 A: Blue
E: 200/220/230/240 VAC
2 TO: Transparent, orange 102 O: Orange
A22NL-MNM- A22NL-MNA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-RNM- A22NL-RNA-
Metal bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-RNM- A22NL-RNA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-RNM- A22NL-RNA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-RNM- A22NL-RNA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)

Note: Normally, the Button and LED Lamp with the same color are combined.
However, opaque white is available by combining a white Button and yellow LED. A22N…-………-TWA-G………-Y…

■ Subassemblies: Refer to pages 8 to 12. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
(You can order Operation Units, LED Lamps, Mounting Collars, and ■ Accessories and tools: Refer to page 13.
Contact Blocks individually.)

4
 A22NN/A22NL
Ordering Information
Model Numbers for Sets - - - Shipped as a set that includes the Operation Unit, LED Lamp, Mounting Collar, and Contact Block.

Non-lighted, Projected Switches

Momentary action (self-resetting) Alternate action (self-holding) (2)(2) (7)(7)(7)
Appearance Contacts
Model Model Button color Contacts
100
1 A22NN-BPM-(2)(2)A-G(7)(7)(7)-NN A22NN-BPA-(2)(2)A-G(7)(7)(7)-NN
Plastic bezels 002
101
2 A22NN-BPM-(2)(2)A-G(7)(7)(7)-NN A22NN-BPA-(2)(2)A-G(7)(7)(7)-NN 102
202
111
112
3 A22NN-BPM-(2)(2)A-G(7)(7)(7)-NN A22NN-BPA-(2)(2)A-G(7)(7)(7)-NN
122
222
NR: Opaque, red
NG: Opaque, green 100
Brushed metal 1 A22NN-MPM-(2)(2)A-G(7)(7)(7)-NN A22NN-MPA-(2)(2)A-G(7)(7)(7)-NN
NY: Opaque, yellow 002
bezels NW: Opaque, white 101
2 A22NN-MPM-(2)(2)A-G(7)(7)(7)-NN A22NN-MPA-(2)(2)A-G(7)(7)(7)-NN NA: Opaque, blue 102
NB: Opaque, black 202
UR: Transparent, red
UG: Transparent, green 111
UY: Transparent, yellow 112
3 A22NN-MPM-(2)(2)A-G(7)(7)(7)-NN A22NN-MPA-(2)(2)A-G(7)(7)(7)-NN
UW: Transparent, white 122
UA: Transparent, blue 222
UO: Transparent, orange 100
1 A22NN-RPM-(2)(2)A-G(7)(7)(7)-NN A22NN-RPA-(2)(2)A-G(7)(7)(7)-NN
002
Metal bezels
101
2 A22NN-RPM-(2)(2)A-G(7)(7)(7)-NN A22NN-RPA-(2)(2)A-G(7)(7)(7)-NN 102
202
111
112
3 A22NN-RPM-(2)(2)A-G(7)(7)(7)-NN A22NN-RPA-(2)(2)A-G(7)(7)(7)-NN
122
222

Lighted, Projected Switches

Momentary action Alternate action (8)
(self-resetting) (self-holding) (2)(2) (7)(7)(7) (9)
Appearance Contacts LED Lamp
Button color Contacts LED Lamp voltage
Model Model color
A22NL-BPM- A22NL-BPA-
Plastic bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-BPM- A22NL-BPA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-BPM- A22NL-BPA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-BPM- A22NL-BPA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-MPM- A22NL-MPA-
Brushed metal (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
bezels TR: Transparent, red 100
1 R: Red
A22NL-MPM- A22NL-MPA- 002 A: 6 VAC/DC
TG: Transparent, green G: Green
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) B: 12 VAC/DC
TY: Transparent, yellow Y: Yellow
C: 24 VAC/DC
A22NL-MPM- A22NL-MPA- TW: Transparent, white W: White
101 D: 100/110/120 VAC
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) TA: Transparent, blue A: Blue
E: 200/220/230/240 VAC
2 TO: Transparent, orange 102 O: Orange
A22NL-MPM- A22NL-MPA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-RPM- A22NL-RPA-
Metal bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-RPM- A22NL-RPA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-RPM- A22NL-RPA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-RPM- A22NL-RPA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)

Note: Normally, the Button and LED Lamp with the same color are combined.
However, opaque white is available by combining a white Button and yellow LED. A22N…-………-TWA-G………-Y…

■ Subassemblies: Refer to pages 8 to 12. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
(You can order Operation Units, LED Lamps, Mounting Collars, and ■ Accessories and tools: Refer to page 13.
Contact Blocks individually.)

5
 A22NN/A22NL
Ordering Information
Model Numbers for Sets - - - Shipped as a set that includes the Operation Unit, LED Lamp, Mounting Collar, and Contact Block.

Non-lighted, Full-guard Switches

Momentary action (self-resetting) Alternate action (self-holding) (2)(2) (7)(7)(7)
Appearance Contacts
Model Model Button color Contacts
100
1 A22NN-BGM-(2)(2)A-G(7)(7)(7)-NN A22NN-BGA-(2)(2)A-G(7)(7)(7)-NN
Plastic bezels 002
101
2 A22NN-BGM-(2)(2)A-G(7)(7)(7)-NN A22NN-BGA-(2)(2)A-G(7)(7)(7)-NN 102
NR: Opaque, red 202
NG: Opaque, green
NY: Opaque, yellow 111
NW: Opaque, white 112
3 A22NN-BGM-(2)(2)A-G(7)(7)(7)-NN A22NN-BGA-(2)(2)A-G(7)(7)(7)-NN
NA: Opaque, blue 122
NB: Opaque, black 222
UR: Transparent, red 100
1 A22NN-MGM-(2)(2)A-G(7)(7)(7)-NN A22NN-MGA-(2)(2)A-G(7)(7)(7)-NN UG: Transparent, green
Brushed metal 002
bezels UY: Transparent, yellow
UW: Transparent, white 101
2 A22NN-MGM-(2)(2)A-G(7)(7)(7)-NN A22NN-MGA-(2)(2)A-G(7)(7)(7)-NN UA: Transparent, blue 102
UO: Transparent, orange 202
111
112
3 A22NN-MGM-(2)(2)A-G(7)(7)(7)-NN A22NN-MGA-(2)(2)A-G(7)(7)(7)-NN
122
222

Lighted, Full-guard Switches

Momentary action Alternate action (8)
(self-resetting) (self-holding) (2)(2) (7)(7)(7) (9)
Appearance Contacts LED Lamp
Button color Contacts LED Lamp voltage
Model Model color
A22NL-BGM- A22NL-BGA-
Plastic bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-BGM- A22NL-BGA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-BGM- A22NL-BGA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 TR: Transparent, red 102 R: Red
A22NL-BGM- A22NL-BGA- A: 6 VAC/DC
TG: Transparent, green 202 G: Green
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) B: 12 VAC/DC
TY: Transparent, yellow Y: Yellow
C: 24 VAC/DC
A22NL-MGM- A22NL-MGA- TW: Transparent, white W: White
Brushed metal D: 100/110/120 VAC
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) TA: Transparent, blue A: Blue
100 E: 200/220/230/240 VAC
bezels 1 TO: Transparent, orange O: Orange
A22NL-MGM- A22NL-MGA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-MGM- A22NL-MGA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-MGM- A22NL-MGA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)

Note: Normally, the Button and LED Lamp with the same color are combined.
However, opaque white is available by combining a white Button and yellow LED. A22N…-………-TWA-G………-Y…

■ Subassemblies: Refer to pages 8 to 12. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
(You can order Operation Units, LED Lamps, Mounting Collars, and ■ Accessories and tools: Refer to page 13.
Contact Blocks individually.)

6
 A22NN/A22NL
Ordering Information
Model Numbers for Sets - - - Shipped as a set that includes the Operation Unit, LED Lamp, Mounting Collar, and Contact Block.

Non-lighted, Mushroom Switches

Momentary action Alternate action
(self-resetting) (self-holding) (2)(2) (7)(7)(7)
Appearance Contacts
Button color Contacts
Model Model
100
1 A22NN-BMM-(2)(2)A-G(7)(7)(7)-NN A22NN-BMA-(2)(2)A-G(7)(7)(7)-NN
Plastic bezels 002
101
2 A22NN-BMM-(2)(2)A-G(7)(7)(7)-NN A22NN-BMA-(2)(2)A-G(7)(7)(7)-NN 102
202
111
112
3 A22NN-BMM-(2)(2)A-G(7)(7)(7)-NN A22NN-BMA-(2)(2)A-G(7)(7)(7)-NN
122
222
NR: Opaque, red
NG: Opaque, green 100
Brushed metal 1 A22NN-MMM-(2)(2)A-G(7)(7)(7)-NN A22NN-MMA-(2)(2)A-G(7)(7)(7)-NN
NY: Opaque, yellow 002
bezels NW: Opaque, white 101
2 A22NN-MMM-(2)(2)A-G(7)(7)(7)-NN A22NN-MMA-(2)(2)A-GáF(7)(7)(7)-NN NA: Opaque, blue 102
NB: Opaque, black 202
UR: Transparent, red
UG: Transparent, green 111
UY: Transparent, yellow 112
3 A22NN-MMM-(2)(2)A-G(7)(7)(7)-NN A22NN-MMA-(2)(2)A-G(7)(7)(7)-NN
UW: Transparent, white 122
UA: Transparent, blue 222
UO: Transparent, orange 100
1 A22NN-RMM-(2)(2)A-G(7)(7)(7)-NN A22NN-RMA-(2)(2)A-G(7)(7)(7)-NN
Metal bezels 002
101
2 22NN-RMM-(2)(2)A-G(7)(7)(7)-NN A22NN-RMA-(2)(2)A-G(7)(7)(7)-NN 102
202
111
112
3 A22NN-RMM-(2)(2)A-G(7)(7)(7)-NN A22NN-RMA-(2)(2)A-G(7)(7)(7)-NN
122
222

Lighted, Mushroom Switches

Momentary action Alternate action (8)
(self-resetting) (self-holding) (2)(2) (7)(7)(7) (9)
Appearance Contacts LED Lamp
Button color Contacts LED Lamp voltage
Model Model color
A22NL-BMM- A22NL-BMA-
Plastic bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-BMM- A22NL-BMA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-BMM- A22NL-BMA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-BMM- A22NL-BMA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-MMM- A22NL-MMA-
Brushed metal (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
bezels TR: Transparent, red 100 R: Red
1
A22NL-MMM- A22NL-MMA- 002 A: 6 VAC/DC
TG: Transparent, green G: Green
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) B: 12 VAC/DC
TY: Transparent, yellow Y: Yellow
C: 24 VAC/DC
A22NL-MMM- A22NL-MMA- TW: Transparent, white W: White
D: 100/110/120 VAC
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) TA: Transparent, blue 101 A: Blue
E: 200/220/230/240 VAC
2 TO: Transparent, orange 102 O: Orange
A22NL-MMM- A22NL-MMA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-RMM- A22NL-RMA-
Metal bezels (2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 100
1
A22NL-RMM- A22NL-RMA- 002
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)
A22NL-RMM- A22NL-RMA-
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9) 101
2 102
A22NL-RMM- A22NL-RMA- 202
(2)(2)A-G(7)(7)(7)-(8)(9) (2)(2)A-G(7)(7)(7)-(8)(9)

Note: Normally, the Button and LED Lamp with the same color are combined.
However, opaque white is available by combining a white Button and yellow LED. A22N…-………-TWA-G………-Y…

■ Subassemblies: Refer to pages 8 to 12. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
(You can order Operation Units, LED Lamps, Mounting Collars, and ■ Accessories and tools: Refer to page 13.
Contact Blocks individually.)

7
 A22NN/A22NL
Ordering Information
Switch Structure - - - - You can order Operation Units, LED Lamp, Mounting Collars, and Contact Blocks individually. Use them in
combination for models that are not available as assembled Switches. They can also be used as inventory for
maintenance parts.
Plastic Operation Units Brushed Metal Operation Units Metal Operation Units

Mounting Collar LED Lamp

Lighted models

Non-lighted
models

Cotnact Blocks Cotnact Blocks + Lighting Unit

Note: Use a Reinforcement Plate for greater strength.

Reinforcement Plate

■ Model numbers of sets: Refer to pages 4 to 7. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
■ Accessories and tools: Refer to page 13.

8
 A22NN/A22NL
Ordering Information
Subassemblies - - - - -You can order Operation Units, LED Lamps, Mounting Collars, and Contact Blocks individually. Use them in
combination for models that are not available as assembled Switches. They can also be used as inventory for
maintenance parts.
Operation Units
Plastic, flat Plastic, projected

Bezel material and button shape

Switch Action Momentary Alternate Momentary Alternate

Lighted/
Transparency Color Model Model Model Model
non-lighted
Opaque Red A22NZ-BNM-NRA A22NZ-BNA-NRA A22NZ-BPM-NRA A22NZ-BPA-NRA
Opaque Green A22NZ-BNM-NGA A22NZ-BNA-NGA A22NZ-BPM-NGA A22NZ-BPA-NGA
Opaque Yellow A22NZ-BNM-NYA A22NZ-BNA-NYA A22NZ-BPM-NYA A22NZ-BPA-NYA
Opaque White A22NZ-BNM-NWA A22NZ-BNA-NWA A22NZ-BPM-NWA A22NZ-BPA-NWA
Opaque Blue A22NZ-BNM-NAA A22NZ-BNA-NAA A22NZ-BPM-NAA A22NZ-BPA-NAA
Opaque Black A22NZ-BNM-NBA A22NZ-BNA-NBA A22NZ-BPM-NBA A22NZ-BPA-NBA
Non-lighted
Transparent Red A22NZ-BNM-URA A22NZ-BNA-URA A22NZ-BPM-URA A22NZ-BPA-URA
Transparent Green A22NZ-BNM-UGA A22NZ-BNA-UGA A22NZ-BPM-UGA A22NZ-BPA-UGA
Transparent Yellow A22NZ-BNM-UYA A22NZ-BNA-UYA A22NZ-BPM-UYA A22NZ-BPA-UYA
Transparent White A22NZ-BNM-UWA A22NZ-BNA-UWA A22NZ-BPM-UWA A22NZ-BPA-UWA
Transparent Blue A22NZ-BNM-UAA A22NZ-BNA-UAA A22NZ-BPM-UAA A22NZ-BPA-UAA
Transparent Orange A22NZ-BNM-UOA A22NZ-BNA-UOA A22NZ-BPM-UOA A22NZ-BPA-UOA
Transparent Red A22NZ-BNM-TRA A22NZ-BNA-TRA A22NZ-BPM-TRA A22NZ-BPA-TRA
Transparent Green A22NZ-BNM-TGA A22NZ-BNA-TGA A22NZ-BPM-TGA A22NZ-BPA-TGA
Transparent Yellow A22NZ-BNM-TYA A22NZ-BNA-TYA A22NZ-BPM-TYA A22NZ-BPA-TYA
Lighted
Transparent White A22NZ-BNM-TWA A22NZ-BNA-TWA A22NZ-BPM-TWA A22NZ-BPA-TWA
Transparent Blue A22NZ-BNM-TAA A22NZ-BNA-TAA A22NZ-BPM-TAA A22NZ-BPA-TAA
Transparent Orange A22NZ-BNM-TOA A22NZ-BNA-TOA A22NZ-BPM-TOA A22NZ-BPA-TOA

Plastic, full-guard Plastic, mushroom

Bezel material and button shape

Switch Action Momentary Alternate Momentary Alternate

Lighted/
Transparency Color Model Model Model Model
non-lighted
Opaque Red A22NZ-BGM-NRA A22NZ-BGA-NRA A22NZ-BMM-NRA A22NZ-BMA-NRA
Opaque Green A22NZ-BGM-NGA A22NZ-BGA-NGA A22NZ-BMM-NGA A22NZ-BMA-NGA
Opaque Yellow A22NZ-BGM-NYA A22NZ-BGA-NYA A22NZ-BMM-NYA A22NZ-BMA-NYA
Opaque White A22NZ-BGM-NWA A22NZ-BGA-NWA A22NZ-BMM-NWA A22NZ-BMA-NWA
Opaque Blue A22NZ-BGM-NAA A22NZ-BGA-NAA A22NZ-BMM-NAA A22NZ-BMA-NAA
Opaque Black A22NZ-BGM-NBA A22NZ-BGA-NBA A22NZ-BMM-NBA A22NZ-BMA-NBA
Non-lighted
Transparent Red A22NZ-BGM-URA A22NZ-BGA-URA A22NZ-BMM-URA A22NZ-BMA-URA
Transparent Green A22NZ-BGM-UGA A22NZ-BGA-UGA A22NZ-BMM-UGA A22NZ-BMA-UGA
Transparent Yellow A22NZ-BGM-UYA A22NZ-BGA-UYA A22NZ-BMM-UYA A22NZ-BMA-UYA
Transparent White A22NZ-BGM-UWA A22NZ-BGA-UWA A22NZ-BMM-UWA A22NZ-BMA-UWA
Transparent Blue A22NZ-BGM-UAA A22NZ-BGA-UAA A22NZ-BMM-UAA A22NZ-BMA-UAA
Transparent Orange A22NZ-BGM-UOA A22NZ-BGA-UOA A22NZ-BMM-UOA A22NZ-BMA-UOA
Transparent Red A22NZ-BGM-TRA A22NZ-BGA-TRA A22NZ-BMM-TRA A22NZ-BMA-TRA
Transparent Green A22NZ-BGM-TGA A22NZ-BGA-TGA A22NZ-BMM-TGA A22NZ-BMA-TGA
Transparent Yellow A22NZ-BGM-TYA A22NZ-BGA-TYA A22NZ-BMM-TYA A22NZ-BMA-TYA
Lighted
Transparent White A22NZ-BGM-TWA A22NZ-BGA-TWA A22NZ-BMM-TWA A22NZ-BMA-TWA
Transparent Blue A22NZ-BGM-TAA A22NZ-BGA-TAA A22NZ-BMM-TAA A22NZ-BMA-TAA
Transparent Orange A22NZ-BGM-TOA A22NZ-BGA-TOA A22NZ-BMM-TOA A22NZ-BMA-TOA

■ Model numbers of sets: Refer to pages 4 to 7. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
■ Accessories and tools: Refer to page 13.

9
 A22NN/A22NL
Ordering Information
Subassemblies - - - - - You can order Operation Units, LED Lamps, Mounting Collars, and Contact Blocks individually. Use them in
combination for models that are not available as assembled Switches. They can also be used as inventory for
maintenance parts.

Brushed metal, flat Brushed metal, projected

Bezel material and button shape

Switch Action Momentary Alternate Momentary Alternate

Lighted/
Transparency Color Model Model Model Model
non-lighted
Opaque Red A22NZ-MNM-NRA A22NZ-MNA-NRA A22NZ-MPM-NRA A22NZ-MPA-NRA
Opaque Green A22NZ-MNM-NGA A22NZ-MNA-NGA A22NZ-MPM-NGA A22NZ-MPA-NGA
Opaque Yellow A22NZ-MNM-NYA A22NZ-MNA-NYA A22NZ-MPM-NYA A22NZ-MPA-NYA
Opaque White A22NZ-MNM-NWA A22NZ-MNA-NWA A22NZ-MPM-NWA A22NZ-MPA-NWA
Opaque Blue A22NZ-MNM-NAA A22NZ-MNA-NAA A22NZ-MPM-NAA A22NZ-MPA-NAA
Opaque Black A22NZ-MNM-NBA A22NZ-MNA-NBA A22NZ-MPM-NBA A22NZ-MPA-NBA
Non-lighted
Transparent Red A22NZ-MNM-URA A22NZ-MNA-URA A22NZ-MPM-URA A22NZ-MPA-URA
Transparent Green A22NZ-MNM-UGA A22NZ-MNA-UGA A22NZ-MPM-UGA A22NZ-MPA-UGA
Transparent Yellow A22NZ-MNM-UYA A22NZ-MNA-UYA A22NZ-MPM-UYA A22NZ-MPA-UYA
Transparent White A22NZ-MNM-UWA A22NZ-MNA-UWA A22NZ-MPM-UWA A22NZ-MPA-UWA
Transparent Blue A22NZ-MNM-UAA A22NZ-MNA-UAA A22NZ-MPM-UAA A22NZ-MPA-UAA
Transparent Orange A22NZ-MNM-UOA A22NZ-MNA-UOA A22NZ-MPM-UOA A22NZ-MPA-UOA
Transparent Red A22NZ-MNM-TRA A22NZ-MNA-TRA A22NZ-MPM-TRA A22NZ-MPA-TRA
Transparent Green A22NZ-MNM-TGA A22NZ-MNA-TGA A22NZ-MPM-TGA A22NZ-MPA-TGA
Transparent Yellow A22NZ-MNM-TYA A22NZ-MNA-TYA A22NZ-MPM-TYA A22NZ-MPA-TYA
Lighted
Transparent White A22NZ-MNM-TWA A22NZ-MNA-TWA A22NZ-MPM-TWA A22NZ-MPA-TWA
Transparent Blue A22NZ-MNM-TAA A22NZ-MNA-TAA A22NZ-MPM-TAA A22NZ-MPA-TAA
Transparent Orange A22NZ-MNM-TOA A22NZ-MNA-TOA A22NZ-MPM-TOA A22NZ-MPA-TOA

Brushed metal, full-guard Brushed metal, mushroom

Bezel material and button shape

Switch Action Momentary Alternate Momentary Alternate

Lighted/
Transparency Color Model Model Model Model
non-lighted
Opaque Red A22NZ-MGM-NRA A22NZ-MGA-NRA A22NZ-MMM-NRA A22NZ-MMA-NRA
Opaque Green A22NZ-MGM-NGA A22NZ-MGA-NGA A22NZ-MMM-NGA A22NZ-MMA-NGA
Opaque Yellow A22NZ-MGM-NYA A22NZ-MGA-NYA A22NZ-MMM-NYA A22NZ-MMA-NYA
Opaque White A22NZ-MGM-NWA A22NZ-MGA-NWA A22NZ-MMM-NWA A22NZ-MMA-NWA
Opaque Blue A22NZ-MGM-NAA A22NZ-MGA-NAA A22NZ-MMM-NAA A22NZ-MMA-NAA
Opaque Black A22NZ-MGM-NBA A22NZ-MGA-NBA A22NZ-MMM-NBA A22NZ-MMA-NBA
Non-lighted
Transparent Red A22NZ-MGM-URA A22NZ-MGA-URA A22NZ-MMM-URA A22NZ-MMA-URA
Transparent Green A22NZ-MGM-UGA A22NZ-MGA-UGA A22NZ-MMM-UGA A22NZ-MMA-UGA
Transparent Yellow A22NZ-MGM-UYA A22NZ-MGA-UYA A22NZ-MMM-UYA A22NZ-MMA-UYA
Transparent White A22NZ-MGM-UWA A22NZ-MGA-UWA A22NZ-MMM-UWA A22NZ-MMA-UWA
Transparent Blue A22NZ-MGM-UAA A22NZ-MGA-UAA A22NZ-MMM-UAA A22NZ-MMA-UAA
Transparent Orange A22NZ-MGM-UOA A22NZ-MGA-UOA A22NZ-MMM-UOA A22NZ-MMA-UOA
Transparent Red A22NZ-MGM-TRA A22NZ-MGA-TRA A22NZ-MMM-TRA A22NZ-MMA-TRA
Transparent Green A22NZ-MGM-TGA A22NZ-MGA-TGA A22NZ-MMM-TGA A22NZ-MMA-TGA
Transparent Yellow A22NZ-MGM-TYA A22NZ-MGA-TYA A22NZ-MMM-TYA A22NZ-MMA-TYA
Lighted
Transparent White A22NZ-MGM-TWA A22NZ-MGA-TWA A22NZ-MMM-TWA A22NZ-MMA-TWA
Transparent Blue A22NZ-MGM-TAA A22NZ-MGA-TAA A22NZ-MMM-TAA A22NZ-MMA-TAA
Transparent Orange A22NZ-MGM-TOA A22NZ-MGA-TOA A22NZ-MMM-TOA A22NZ-MMA-TOA

■ Model numbers of sets: Refer to pages 4 to 7. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
■ Accessories and tools: Refer to page 13.

10
 A22NN/A22NL
Ordering Information
Subassemblies - - - - -You can order Operation Units, LED Lamps, Mounting Collars, and Contact Blocks individually. Use them in
combination for models that are not available as assembled Switches. They can also be used as inventory for
maintenance parts.

Metal, flat Metal, projected

Bezel material and button shape

Switch Action Momentary Alternate Momentary Alternate

Lighted/
Transparency Color Model Model Model Model
non-lighted
Opaque Red A22NZ-RNM-NRA A22NZ-RNA-NRA A22NZ-RPM-NRA A22NZ-RPA-NRA
Opaque Green A22NZ-RNM-NGA A22NZ-RNA-NGA A22NZ-RPM-NGA A22NZ-RPA-NGA
Opaque Yellow A22NZ-RNM-NYA A22NZ-RNA-NYA A22NZ-RPM-NYA A22NZ-RPA-NYA
Opaque White A22NZ-RNM-NWA A22NZ-RNA-NWA A22NZ-RPM-NWA A22NZ-RPA-NWA
Opaque Blue A22NZ-RNM-NAA A22NZ-RNA-NAA A22NZ-RPM-NAA A22NZ-RPA-NAA
Opaque Black A22NZ-RNM-NBA A22NZ-RNA-NBA A22NZ-RPM-NBA A22NZ-RPA-NBA
Non-lighted
Transparent Red A22NZ-RNM-URA A22NZ-RNA-URA A22NZ-RPM-URA A22NZ-RPA-URA
Transparent Green A22NZ-RNM-UGA A22NZ-RNA-UGA A22NZ-RPM-UGA A22NZ-RPA-UGA
Transparent Yellow A22NZ-RNM-UYA A22NZ-RNA-UYA A22NZ-RPM-UYA A22NZ-RPA-UYA
Transparent White A22NZ-RNM-UWA A22NZ-RNA-UWA A22NZ-RPM-UWA A22NZ-RPA-UWA
Transparent Blue A22NZ-RNM-UAA A22NZ-RNA-UAA A22NZ-RPM-UAA A22NZ-RPA-UAA
Transparent Orange A22NZ-RNM-UOA A22NZ-RNA-UOA A22NZ-RPM-UOA A22NZ-RPA-UOA
Transparent Red A22NZ-RNM-TRA A22NZ-RNA-TRA A22NZ-RPM-TRA A22NZ-RPA-TRA
Transparent Green A22NZ-RNM-TGA A22NZ-RNA-TGA A22NZ-RPM-TGA A22NZ-RPA-TGA
Transparent Yellow A22NZ-RNM-TYA A22NZ-RNA-TYA A22NZ-RPM-TYA A22NZ-RPA-TYA
Lighted
Transparent White A22NZ-RNM-TWA A22NZ-RNA-TWA A22NZ-RPM-TWA A22NZ-RPA-TWA
Transparent Blue A22NZ-RNM-TAA A22NZ-RNA-TAA A22NZ-RPM-TAA A22NZ-RPA-TAA
Transparent Orange A22NZ-RNM-TOA A22NZ-RNA-TOA A22NZ-RPM-TOA A22NZ-RPA-TOA

Metal, mushroom

Bezel material and button shape

Switch Action Momentary Alternate

Lighted/
Transparency Color Model Model
non-lighted
Opaque Red A22NZ-RMM-NRA A22NZ-RMA-NRA
Opaque Green A22NZ-RMM-NGA A22NZ-RMA-NGA
Opaque Yellow A22NZ-RMM-NYA A22NZ-RMA-NYA
Opaque White A22NZ-RMM-NWA A22NZ-RMA-NWA
Opaque Blue A22NZ-RMM-NAA A22NZ-RMA-NAA
Opaque Black A22NZ-RMM-NBA A22NZ-RMA-NBA
Non-lighted
Transparent Red A22NZ-RMM-URA A22NZ-RMA-URA
Transparent Green A22NZ-RMM-UGA A22NZ-RMA-UGA
Transparent Yellow A22NZ-RMM-UYA A22NZ-RMA-UYA
Transparent White A22NZ-RMM-UWA A22NZ-RMA-UWA
Transparent Blue A22NZ-RMM-UAA A22NZ-RMA-UAA
Transparent Orange A22NZ-RMM-UOA A22NZ-RMA-UOA
Transparent Red A22NZ-RMM-TRA A22NZ-RMA-TRA
Transparent Green A22NZ-RMM-TGA A22NZ-RMA-TGA
Transparent Yellow A22NZ-RMM-TYA A22NZ-RMA-TYA
Lighted
Transparent White A22NZ-RMM-TWA A22NZ-RMA-TWA
Transparent Blue A22NZ-RMM-TAA A22NZ-RMA-TAA
Transparent Orange A22NZ-RMM-TOA A22NZ-RMA-TOA

■ Model numbers of sets: Refer to pages 4 to 7. ■ Specifications: Refer to page 15.■ Dimensions: Refer to page 17.
■ Accessories and tools: Refer to page 13.

11
 A22NN/A22NL
Ordering Information
Subassemblies - - - You can order Operation Units, LED Lamps, Mounting Collars, and Contact Blocks individually. Use them in
combination for models that are not available as assembled Switches. They can also be used as inventory for
maintenance parts.

LED Lamps
Applied voltage 6 VAC/DC 12 VAC/DC 24 VAC/DC 100/110/120 VAC 200/220/230/240 VAC
Appearance
Color Model Model Model Model Model
Red A22NZ-L-RA A22NZ-L-RB A22NZ-L-RC A22NZ-L-RD A22NZ-L-RE
Green A22NZ-L-GA A22NZ-L-GB A22NZ-L-GC A22NZ-L-GD A22NZ-L-GE
Yellow A22NZ-L-YA A22NZ-L-YB A22NZ-L-YC A22NZ-L-YD A22NZ-L-YE
White A22NZ-L-WA A22NZ-L-WB A22NZ-L-WC A22NZ-L-WD A22NZ-L-WE
Blue A22NZ-L-AA A22NZ-L-AB A22NZ-L-AC A22NZ-L-AD A22NZ-L-AE

Orange A22NZ-L-OA A22NZ-L-OB A22NZ-L-OC A22NZ-L-OD A22NZ-L-OE

Mounting Collar
Appearance Model

A22NZ-H-01

Contact Blocks
Appearance Contacts Model

SPST-NO (blue) A22NZ-S-G1A

SPST-NC (orange) A22NZ-S-G1B

Lighting Units
Appearance Applied voltage Model
6 VAC/DC A22NZ-T-A
12 VAC/DC A22NZ-T-B
24 VAC/DC A22NZ-T-C
100/110/120 VAC A22NZ-T-D
200/220/230/240 VAC A22NZ-T-E

Reinforcement Plate
Appearance Model

A22NZ-A-C01

12
 A22NN/A22NL
Ordering Information
Accessories and Tools (Order Separately)
Item Appearance Classification Model Remarks

Used to tighten Mounting Nuts

Tightening Wrench --- A22NZ-A-301
from the back of the panel.

Made of rubber and used to easily

LED Lamp Extractor --- A22NZ-A-302
remove and attach LED Lamps.

A protector designed to prevent

incorrect operation. Cannot be
Protective Cover --- A22NZ-A-303
used together with other accesso-
ries. (Rubber seal included.)

Can be plugged into precut panel

holes for future expansion.
Plastic Hole Plug Round A22NZ-A-401 Applicable panel thickness: 0.8 to
3.0 mm
For 22.3-mm panel hole diameter.

Can be plugged into precut panel

holes for future expansion.
Metal Hole Plug Round A22NZ-A-402
Applicable panel thickness: 0.8 to
6.0 mm (Rubber seal included.)

Used when a more secure lock is

required to prevent rotation inside
Lock Ring Round A22NZ-A-403 the Operation Unit.
(Rubber seal included.)
For 22.3-mm panel hole diameter.

Used when a more secure lock is

Lock Ring --- A22NZ-A-50501 required to prevent rotation of the
Operation Unit.

Control Box 1 hole A22NZ-A-B01Y

Used to replace the Caps on Flat,

Cap Tightening
--- A22Z-3908 Projected, and Full-guard Push-
Wrench
button Switches.

13
 A22NN/A22NL

Item Appearance Classification Model Remarks

Legend Plate with no text on black

Small Legend Plate
Black A22NZ-A-50103 background included.
Frame
For 22.3-mm panel hole diameter.

A22Z-3443B Black
A22Z-3443R Red
Without text
A22Z-3443W White
A22Z-3443C Transparent
 A22Z-3443R-2
White text on red background
STOP A22Z-3443R-4
--- A22Z-3443B-1
Small Legend Plates
START A22Z-3443B-3
ON A22Z-3443B-5
OFF A22Z-3443B-6 Legend Plate with white text on
black background included.
UP A22Z-3443B-7 For 22.3-mm panel hole diameter.
DOWN A22Z-3443B-8
POWER ON A22Z-3443B-9
OFF-ON A22Z-3443B-10

Legend Plate with no text on black

Large Legend Plate
Black A22NZ-A-51103 background included.
Frame
For 22.3-mm panel hole diameter.

A22Z-3453B Black
A22Z-3453R Red
Large Legend Plates Without text
A22Z-3453W White
A22Z-3453C Transparent

14
 A22NN/A22NL
Specifications
Certified Safety Standard Ratings
UL 508 (File No. E76675), CSA C22.2 No.14
6 A 240 VAC, 10 A 120 VAC
TÜV (EN60947-5-1)
AC-15 3 A 240 VAC
DC-13 4 A 24 VDC
CCC (GB14048.5)
AC-15 3 A 240 VAC
DC-13 4 A 24 VDC

Ratings
Contacts (Standard Load)
Rated insulation voltage 600 V
Rated carry current 10 A
Applied voltage 24 V 120 V 240 V 380 V 440 V
AC at 50/60 Resistive load (AC-12) 10 A 10 A 6A 2A 2A
Hz Inductive load (AC-15) 10 A 6A 3A 1.9 A 1.6 A
Resistive load (DC-12) 8A 2.2 A 1.1 A --- ---
DC
Inductive load (DC-13) 4A 1.1 A 0.55 A --- ---
Note: 1. The above ratings were obtained by conducting tests under the following conditions.
(1) Ambient temperature: 20 ±2°C
(2) Ambient humidity: 65% ±5% RH
(3) Operating frequency: 30 operations/minute
2. Minimum applicable load: 10 mA at 5 VDC.

LED Lamps
Rated voltage Applied voltage Rated current
Approx. 11 mA (red, orange, yellow, or blue)
6 VAC/DC 6 VAC/DC ±10%
Approx. 5 mA (white or green)
Approx. 12 mA (red, orange, yellow, or blue)
12 VAC/DC 12 VAC/DC ±10%
Approx. 5 mA (white or green)
Approx. 12 mA (red, orange, yellow, or blue)
24 VAC/DC 24 VAC/DC ±10%
Approx. 5 mA (white or green)
100 VAC 100 VAC ±10%
110 VAC 110 VAC ±10% Approx. 2 mA
120 VAC 100 to 130 VAC
200 VAC 200 VAC ±10%
220 VAC 220 VAC ±10%
Approx. 2 mA
230 VAC 230 VAC ±10%
240 VAC 220 to 250 VAC

15
 A22NN/A22NL
Specifications
Characteristics
Type Pushbutton Switches
Item Non-lighted models Lighted models
Allowable operating Mechanical 60 operations/minute max.
frequency Electrical 30 operations/minute max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 100 mΩ max. (initial value)
Between terminals of same polarity 2,500 VAC at 50/60 Hz for 1 min
Dielectric strength
Between each terminal and ground 2,500 VAC at 50/60 Hz for 1 min
Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
Shock resistance Malfunction 1,000 m/s2 max. (malfunction within 1 ms)
Momentary action: 5,000,000 operations min.
Mechanical
Durability Alternate action: 500,000 operations min.
Electrical 500,000 operations min.
Ambient operating temperature*1 −25 to 70°C −25 to 55°C
Ambient operating humidity 35% to 85% RH
Ambient storage temperature*1 −40 to 80°C
Degree of protection*2 IP66, NEMA 4X, NEMA13
Electric shock protection class Class II
PTI (tracking characteristic) 175
Degree of contamination (application environment) 3 (IEC 60947-5-1)

Weight Approx. 50 g (for 1NC/1NO) Approx. 65 g (for 1NC/1NO)

*1. With no icing or condensation.

*2. Degree of protection from the front of the panel.

Operating Characteristics (for SPST-NO/SPST-NC)

Type Pushbutton Switches
Item Lighted/non-lighted
Total travel force (torque) (maximum TTF) 18 N
Total travel (TT) 6 mm max.
Resetting force (torque) (RF) ---

Examples of Linked Contact Blocks Contact Blocks Lighting Units

Pushbutton Switches
Momentary Alternate
Lighted Non-lighted Lighted Non-lighted

Operation Unit Operation Unit Operation Unit Operation Unit

Mounting Collar Mounting Collar Mounting Collar Mounting Collar

Stage 2 Stage 1

Linking example

Operation Unit

Mounting Collar

Note: If you increase the number of Contact Blocks, evaluate the Switch under actual working conditions before permanent installation and use
the Switch within a number of switching operations that will not adversely affect the Switch’s performance.

16
 A22NN/A22NL
Dimensions (Unit: mm)

Lighted and Non-lighted Pushbutton Switches

Flat Switches with Plastic Bezels
A22NN-BN…-N…A-G…-NN A22NL-BN…-T…A-G…-……
R29.5
A22NN-BN…-U…A-G…-NN

28.8 dia. 43.5

47 28.8 dia. 43.5

5
0.5 0.5
5 1.8
6
30 1.8 45.3
13.5
11 45.3

Projected Switches with Plastic Bezels

A22N…-BP…-…A-G…-……

28.8 dia.
23.3 dia. 43.5

11

19.1 45.3

Full-guard Switches with Plastic Bezels

A22N…-BG…-…A-G…-……

28.8 dia. 43.5

11

19.1 45.3

Mushroom Switches with Plastic Bezels

A22N…-BM…-…A-G…-……

40 dia. 43.5

11

20.7 45.3

17
 A22NN/A22NL
Dimensions (Unit: mm)

Flat Switches with Brushed Metal Bezels

A22NN-MN…-N…A-G…-NN A22NL-MN…-T…A-G…-……
A22NN-MN…-U…A-G…-NN
R29.5

28.8 dia. 43.5

47 28.8 dia. 43.5

5
0.5
1.8
11
30 45.3 13.5 45.3

Projected Switches with Brushed Metal Bezels

A22N…-MP…-…A-G…-……

28.8 dia.
43.5
23.3 dia.

11

19.1 45.3

Full-guard Switches with Brushed Metal Bezels

A22N…-MG…-…A-G…-……

28.8 dia. 43.5

11

19.1 45.3

Mushroom Switches with Brushed Metal Bezels

A22N…-MM…-…A-G…-……

40 dia. 43.5

11

20.7 45.3

18
 A22NN/A22NL
Dimensions (Unit: mm)

Flat Switches with Metal Bezels

A22NN-RN…-N…A-G…-NN A22NL-RN…-T…A-G…-……
A22NN-RN…-U…A-G…-NN
R29.5

28.8 dia. 43.5

47 28.8 dia. 43.5

5
0.5
1.8
11
30 45.3 13.5
45.3

Projected Switches with Metal Bezels

A22N…-RP…-…A-G…-……

28.8 dia.
43.5
23.3 dia.

11

19.1 45.3

Mushroom Switches with Metal Bezels

A22N…-RM…-…A-G…-……

40 dia. 43.5

11

20.7 45.3

Depth with Linked Units

45.3

66.8

Terminal Wiring Diagrams Terminal Connection Diagrams

Bottom View
Non-lighted Switches Non-lighted Switches
Lighted Switches (1NO/1NC) Lighted Switches (1NO/1NC)
(2NO/1NC) (2NO/1NC)
Contact configuration Contact configuration
Contact configuration Contact configuration
code:102 code:102
code:112 code:112

20 20

10 10 Lighting Unit Bottom View Bottom View

Contact Blocks

1 3 3 1 X1 3

X
LED
Lamp
Six, M3.5
Six, M3.5
Phillips/slotted Phillips/slotted 2 4 4 2 X2 4
screws screws
Contact Blocks

19
 A22NN/A22NL
Dimensions (Unit: mm)

LED Lamps Mounting Collar R29.5

A222NZ-L-@@ A22NZ-H-01

24.3 30

9.8 dia.
9 dia.

17.1

51.3

Contact Blocks Lighting Units

A22NZ-S-G1@ A22NZ-Z-@
4 12 dia.

29.6
22.2 32.2
29.6

47 9.9

47 9.9

Reinforcement Plate
A22NZ-A-C01
12.1

29.8

3.6

20
 A22NN/A22NL
Dimensions (Unit: mm)

Dimensions of Accessories
Tightening Wrench LED Extractor
A22NZ-A-301 A22NZ-A-302

3-dia. hole

2.8
14 dia. 10 dia.
28 dia.

59
2.5
107.5

Protective Cover Plastic Hole Plug

50 dia. 29 dia.
A22NZ-A303 A22NZ-A-401

25 dia.

133
8 dia.
30 3.50
14 16
7

Metal Hole Plug Lock Ring

A22NZ-A-402 25.5 dia.
A22NZ-A-403 29 dia.
2.5
1.5
22 dia.

20 dia. Rubber seal

25.5 dia.

15

Control Box
Four, M4 Phillips Four, 3.7-dia,
A22NZ-A-B01Y binding screws 40 M4-tapped holes
Cover (yellow) Case (black)
24.2 22.3 dia. 10 Two, 14-dia.
Two, 21.4-dia bottom lead holes
side lead holes Two, 4.4-dia
oval mounting holes
24.2 80 62
3.2

18.5
3.2 5.4
10
80 38 40
59.9

Lock Ring
A22NZ-A-50501

29

1.8
1
29

21
 A22NN/A22NL
Dimensions (Unit: mm)

Legend Plate Frames

Small A22NZ-A50103 Large A22NZ-A51103
4.5 5

0.9
40 0.9
50
20.6

20.6

R15 22 dia. 3.2 22 dia.

30 4.2 22 dia. 3.2
30 4.2

Legend Plates
Small A22Z-3443@-@ Large A22Z-3453@
1 26.8 1
26.8
8.2

17.9

Cap Tightening Wrench

A22Z-3908

5 dia.

23.4 20.5

1


22
 A22NN/A22NL
Safety Precautions
Refer to Safety Precautions for All Pushbutton Switches/Indicators.

Precautions for Safe Use Precautions for Correct Use

• Never perform wiring work on a Switch while power is being Mounting
supplied. Never touch terminals and other charged parts while • Do not tighten the Mounting Nut more than necessary using tools
power is being supplied. Doing so may result in electrical shock. such as pointed-nose pliers. Doing so will damage the Mounting
• Never attempt to disassemble or modify the Switch in any way. Nut. (The tightening torque of the Mounting Nut is 1.0 to 2.0 N·m.)
Doing so may prevent correct operation.
• Switch functionality may be inhibited. Do not drop the Switch. Wiring
Never apply a force that would deform or alter the nature of the • Terminal screws must be M3.5 Phillips or slotted screws with a
Switch. square washer.
• The durability of the Switch is greatly affected by operating • The terminal screw tightening torque is 1.0 to 1.3 N·m.
conditions. Evaluate the Switch under actual working conditions • Solid wires, stranded wires, and crimp terminals can be connected
before permanent installation and use the Switch within a number to the Switch.
of switching operations that will not adversely affect the Switch’s Stranded wires: AWG14 to AWG16
performance. Solid wire: 1.6 dia. max.
• Do not use a load voltage or current that exceeds the rating. Doing Bare Crimp Terminals
so may damage or cause burning in the Switch.
• Do not use the Switch in a location with inflammable or explosive 7.2 mm max. 7.2 mm max.

gases, or where the Switch would be subjected to inflammable

solvents. The arcs and heat generated when the Switch is
16.0 mm max. 16.0 mm max.
operated can cause ignition or explosions.
• Do not use the Switch where sulfur gas (H2S, SO2), ammonia gas
(NH3), nitric acid gas (HNO3), chlorine gas (Cl2), or other harmful Crimp Terminals with Insulating Sheathes
gases are present or where high humidity is present. Contact faults 7.2 mm max. 7.2 mm max.
and damage due to corrosion may interfere with the functionality of
the Switch.
• Do not use the Switch in oil or water or in an environment subject 20.2 mm max. 20.2 mm max.
to constant contact with oil or water. The oil or water may enter the
Switch, causing failure.
• Do not use or store the Switch in the following locations. • After wiring the Switch, maintain appropriate clearance and
•Locations subject to rapid temperature changes creepage distances.
•Locations subject to condensation due to high humidity
•Locations subject to vibration Operating Environment
•Locations subject to direct sunlight • The Switch is intended for indoor use only.
•Locations subject to salty air Using the Switch outdoors will result in failure.
• Make sure that the rubber washer is in place between the
Operation Unit and the panel. Otherwise, the specifications of the LED Lamps
protective structure may not be satisfied. • A current-limiting resistor is built into the LED Lamp, so external
• Do not subject the Contact Block or wiring to excessive force. The resistance is not required.
Contact Block may be damaged or deformed and faulty contact
may occur. • False Lighting of the LED Lamp
The LED Lamp will light with a microcurrent of approx. 0.1 mA or
less. Take countermeasures, such as adding a resistor in parallel
to the LED Lamp, to prevent false lighting.
The micro-current varies with the machine (due to leakage current,
stray capacity between cables, etc.). Select a resistance value and
allowable power consumption according to the actual current.

Example of Circuit to Prevent False Lighting

For 24 VAC/VDC Lighting Unit

X1
R: 10 kΩ (1 W)
bleeder resistor
LED
Lamp
X2

23
 A22NN/A22NL

Application
Mounting to the Panel
Panel Hole Dimensions Dimension B
• Panel hole dimensions are given below. Operation Unit shape Dimension B
• The recommended panel thicknesses are given below. Mushroom 40 mm min.

Panel hole dimension Panel thickness Other than the above 30 mm min.

22.3 dia. 0.8 to 5 mm Mounting the Operation Unit

25.5 dia. 0.8 to 6 mm • Panel Hole of 22.3-mm Diameter
• If outer surface treatment such as coating is performed for the Insert the Operation Unit from the front of the panel, insert the Lock
panel, the panel dimensions after outer surface treatment must Ring and Mounting Nut from the back of the panel, and tighten the
meet the specified panel dimensions. Mounting Nut. Before tightening, check that the rubber washer is
• The following figure gives pitch dimension A and pitch dimension present between the Operation Unit and the panel.
B between the centers of the mounting holes.
Mounting Nut
Panel Hole Dimensions for 22.3 Diameter Lock Ring
3.2 +0.2
0
R: 0.8 max.

22.3 +0.4 dia. Rubber washer

0
22.3 dia.

24.1 +0.4
0 dia.

• Panel Hole of 25.5-mm Diameter

Dimension A Dimension B Do not use the Lock Ring, and tighten the Mounting Nut while
22.3 +0.4 dia.
confirming that the projecting part (see following figure) on the
22.3 +0.4 dia. 0
0
Mounting Nut is aligned with mounting hole. Before tightening,
check that the rubber washer is present between the Operation
Unit and the panel.

Mounting Nut
Using the Lock Ring Standard Switch
Rubber washer Projecting part
25.5 dia.

Panel Hole Dimensions for 25.5 Diameter

+0.5
25.5 0 dia.

• Align the Lock Ring with the slot on the case and insert it so that
the edge is flush with the panel.

Dimension A Mounting the Contact Block to the Operation Unit

Minimum al- • Insert the Operation Unit into the Mounting Collar, aligning the TOP
Number of Number of mark inscribed on the Operation Unit with the lever on the
lowable pitch
Wire type linked Con- wires per ter-
Dimension A Mounting Collar, and then turn the lever in the direction indicated
tact Blocks minal
(mm) or larger by the arrow in the following figure all of the way until it clicks into
Leads (twisted wires
1 1 50 place.
or solid wire)
Bare crimp terminals 1 1 50
Crimp terminals with
1 1 60
insulating sheathes

Note: The minimum mounting pitch is based on three Contact Blocks (1)
in stage 1 with one wire attached to each terminal.
TOP mark
If you attach two wires or link Units, determine the mounting
pitch based on the dimensions diagrams and ease of operation
and wiring.
Dimension A When Using Accessory (2)
• Dimension A is 50 mm minimum when a Standard Legend Plate
Frame is attached.
• Dimension A is 51 mm minimum when a Large Legend Plate
Frame is attached.
• Dimension A is 75 mm minimum when a Protective Cover is
attached.

24
 A22NN/A22NL

Removing the Mounting Collar Removing the Contact Block

• Press the lock lever in from the back side to release the lock, and • Insert a screwdriver into the gap between the Mounting Collar and
then hook the Mounting Collar with a screwdriver, move it in the Contact Block and press it inward in the direction shown at (2).
direction indicated at (2), and remove it. Turn the lever all of the
way until it clicks into place.

(2)

(1)

(1)

(2)

(3)
(3)

Attaching the Reinforcement Plate

Contact Block • To link Contact Blocks together, attach a Reinforcement Plate in
Attaching the Contact Block the direction shown in the following figure. To remove the Plate,
• Catch the projection on the opposite side of the Mounting Collar insert a screwdriver in the direction indicated at (1) and rotate it in
from the lever side and press the Contact Block in the direction the direction indicated at (2).
indicated at (1).

(1)

(1)

(2)

Engraving
• Engrave legends on the Legend Plates.
Do so with the straight part of the Legend Plate positioned on the
right and left.
• The characters must be engraved no deeper than 0.5 mm. Use an
alcohol-based paint, such as a melamine, phthalic acid, or acrylic
resin based paint.

Projected, Full-guard, or Mushroom

Flat Switches
Switches

15.4 dia. 17.7 dia.

25
 A22NN/A22NL

Attaching Character Films Removing and Tightening the Cap

• To attach a character film, remove the Button and attach the film, For all Switches except for Mushroom Switches, use the A22Z-3908
aligning it with the straight portions of the Legend Plate. Cap Tightening Tool to loosen the cap. When you tighten the cap,
make sure that the Legend Plate is in the correct position and then
Projected Switches Full-guard Switches
turn the cap in the direction opposite of the direction shown in the
following figure. Tighten it to a torque of 0.5 to 1.0 N·m so that it will
not become loose.

Legend Plate Legend Plate (1) (1)

Button
Button
Flange
(2) (2)

Mushroom Switches Flat Switches

Attaching the LED Lamp to the Lighting Unit
• Insert the protrusions on the LED Lamp into the guides on the
Lighting Unit and then turn the LED Lamp in direction (2) to lock it
in place.

Legend Plate (1)

Legend Plate (2)
Button
Button

• Prepare films of the following sizes depending on the type of

Legend Plate.

Display range

15.4 dia.

Legend
Plate di- Attaching and Replacing LED Lamps
1.6
mensions 5.15 Removing the LED Lamp from the Panel Surface
• Insert the LED Lamp Extractor as shown in the following figure and
Projected,
Full-guard, or 15.9 dia.
then rotate the Extractor in the direction shown at (2) while
Mushroom pressing it inward.
Switches
17.1 0−0.2 dia.

Film dimen- (2)

sions
(1)
15.4 0−0.2

T = 0.1 to 0.2 mm

Display range
Attaching the LED Lamp from the Panel Surface
17.7 dia.
Legend • Insert the LED Lamp into the LED Lamp Extractor as shown in the
Plate di- following figure. Align the projections on the LED Lamp with the
mensions LED Lamp insertion guides, insert the LED Lamp, and turn it in the
1.30
direction indicted at (2).
2.00
(2)
Flat Switches
19.6 0−0.2 dia. (1)

Film dimen-
sions
17.5 0−0.2

T = 0.1 to 0.2 mm
LED Lamp insertion guides

26
 A22NN/A22NL

Control Box Attaching the Lock Ring

You can attach a Legend Plate Frame. Attach the Lock Ring as shown in the following figure.
Attach it in the direction shown in the following figure. To ensure water resistance, attach the rubber washer in the specified
Mount the Switch in the same way as for a standard panel. The location.
tightening torque of the Box screws is 1.4 to 2.0 N·m.
Align the projection
Legend Plate on the Lock Ring
with the notch in the
panel.

Operation
Unit
Rubber washer (built
into the Operation Unit)

Lock Ring (A22NZ-A-403)

Creating a Cable Hole
To open a cable hole, leave the cover attached, place the tip of a Rubber washer
(built into the Lock Ring)
screwdriver in the grooves at four locations around the cable hole,
and strike the screwdriver with a hammer to open the hole. Panel
Panel thickness:
0.8 to 4 mm

Screwdriver • Align the TOP mark on the Operation Unit, part A on the Legend
Side Plate, and the notch in the panel, and insert the Operation Unit.
Switch Box Cover
Part A
TOP mark
Cable hole

Strike at four
diagonally
opposed locations
Groove to open the hole.
Attaching and Removing Legend Plates
• Press the Legend Plate into the depression in the Legend Plate Legend Plate
Frame. The Legend Plate Frame can be separate or it can be Panel thickness: 0.8 to 4 mm
mounted on the panel when you attach the Legend Plate.
• The direction of the characters will depend on the mounting • If there is no notch in the panel, remove part A from the Legend
direction of the Operation Unit if the Switch is a Selector Switch or Plate with pliers.
Key Selector Switch.
Part A

Legend Plate Frame

Legend Plate

Depression

• You can easily remove the Legend Plate by pressing it forwards

from the back of the Legend Plate Frame. Attaching the Protective Cover
• The acrylic plastic Legend Plate is easily damaged by shock. Attach the Protective Cover (A22NZ-A-303) to a panel that is 0.8 to
Handle it with care. 1.0 mm thick. To ensure water resistance, attach the rubber washer
in the specified location.

Protective Cover Mounting Nut

(A22NZ-A-303)
Operation Unit Panel Lock Ring
Rubber washer

27
 MEMO

28
 Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have
any questions or comments.

Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products
or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,
to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the
non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price
of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or
unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is
not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,
or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with
respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.

Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it
to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice
to change part numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
OMRON Corporation Industrial Automation Company Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V. OMRON ELECTRONICS LLC
Wegalaan 67-69, 2132 JD Hoofddorp 2895 Greenspoint Parkway, Suite 200
The Netherlands Hoffman Estates, IL 60169 U.S.A
Tel: (31)2356-81-300/Fax: (31)2356-81-388 Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

OMRON ASIA PACIFIC PTE. LTD. OMRON (CHINA) CO., LTD. © OMRON Corporation 2015 All Rights Reserved.
No. 438A Alexandra Road # 05-05/08 (Lobby 2), Room 2211, Bank of China Tower, In the interest of product improvement,
Alexandra Technopark, 200 Yin Cheng Zhong Road, specifications are subject to change without notice.
Singapore 119967 PuDong New Area, Shanghai, 200120, China
Tel: (65) 6835-3011/Fax: (65) 6835-2711 Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 Cat. No. A239-E1-01 0415 (0415)