Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

JBL CSSH30.v5

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Professional Series

CSS-H30 30 Watt Paging Horn

Key Features
cE  xcellent voice range clarity for
announcement and paging.
c High sensitivity delivers high
sound levels with minimal power
amplification.
c Focused 50° horizontal by 70° vertical
coverage for long throw capability.
cP  henolic diaphragm driver for outdoor
durability and high reliability.
c UL-registered 30-watt multi-tap
transformer, with 8 ohm direct bypass.
c Built-in high-pass filter enhances
reliability by protecting against low
frequency damage.
c Highly weather-resistant, with stainless
steel bracket and hardware.

Application
The Commercial Solutions Series
CSS-H30 Paging Horn provides excellent Specifications:
voice range clarity for public address System:
systems, announcement/paging, Frequency Response (-10 dB)1: 380 Hz – 6 kHz
intercom, security, alarm and industrial Coverage Pattern: 50° horizontal by 70° vertical (at 2 kHz and averaged
applications. Designed for demanding 1 kHz – 4 kHz)
environmental conditions, the CSS-H30 is Included High-Pass Filter: Passive 350 Hz high-pass filter built-in to protect
against damage from frequencies below operational
highly weather resistant (IP-65 rated) so range.
it can be used in either indoor or outdoor Directivity Factor (Q): 15.8 (2 kHz)
applications. The focused coverage Directivity Index (DI): 12 (2 kHz)
pattern allows the horn to project the System Power Rating2: 30 W (120 W peak), 100 hrs.
sound a farther distance than is the Sensitivity (1W, 2.83V@ 1m): 108 dB, ave. 1 kHz – 6 kHz
case with wider-coverage paging horns. 112 dB at 1.4 kHz
Typical applications for this product Maximum SPL (1m)3: 123 dB cont ave. (129 dB peak), 1 kHz – 6 kHz;
are public access areas, warehouses, 127 dB cont ave. (133 dB peak), 1.4 kHz, 30W input,
8 ohm Setting
factories, schools, recreational facilities,
Nominal Impedance : 30W/70V, NC/100V tap: 167 ohms
commercial buildings, distribution 15W/70V, 30W/100V tap: 333 ohms
centers, civic centers, and other 7.5W/70V, 15W/100V tap: 667 ohms
commercial sound and protective- 3.8W/70V, 7.5W/100V tap: 1333 ohms
signaling systems. 1.9W/70V, 3.8W/100V tap: 2666 ohms
8 ohms at 8 ohm direct setting
The CSS-H30 includes a UL-registered Transformer Taps: 70V: 30W, 15W, 7.5W, 3.8W, 1.9W
30-watt multi-tap transformer for use with 100V: 30 W, 15W, 7.5W, 3.8W
70V or 100V distributed speaker lines. Transducers:
The power tap switch is screwdriver Driver: 38 mm (1.5 in) diameter with phenolic diaphragm
adjustable for easily changing settings Physical:
from 30W, 15W, 7.5W, 3.8W (and 1.9W Horn Material: ABS
at 70V only). For non-distributed systems Mounting Hardware: Stainless steel powder-coated U-bracket (yolk) with
there is an 8 ohm bypass position. 3 x 10.4 mm (0.41 in) dia mounting holes, stainless
steel exterior hardware.
Connection is via bare wire on a built-in
Color: RAL9016 (horn and bracket)
jacketed cable with water-tight entrance
Input Connection: 300 mm (12 in) pigtail to bare wire; entrance via water-
to the speaker. tight fitting. Wire colors: red = positive (+); black =
The transducer diaphragm is sturdy negative (-).
phenolic material to enhance durability, Environmental: IP-65 rating per IEC529, salt spray per B117, stainless
steel U-bracket and exterior hardware.
especially in outdoor applications, and Safety Agency: Transformer UL Registered per UL1876 “Isolating Signal
to resist deformation under stressful and Feedback Transformers for Use in Electronic
temperature conditions. To further Equipment”
increase reliability, a 350 Hz high-pass Dimensions (H x W x D): 206 x 285 x 287 mm (8.2 x 11.2 x 11.3 in) horn
filter is built-in to protect the paging horn 224 x 285 x 287 mm (8.9 x 11.2 x 11.3 in) including
mounting bracket. Depth excludes cable exit.
against damage from frequencies below
Weight (ea): 4.5 lb/2.0 kg
the operational frequency band. The horn
Shipping Weight (ea): 6.0 lb/2.7 kg
is constructed from sturdy ABS plastic
Included Accessories: Stainless steel mounting bracket
and exterior hardware is corrosion- 1
Based on average 1 kHz – 6 kHz sensitivity
resistant stainless steel. A stainless steel 2
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air, 100 hr continuous.
mounting bracket is included. 3
Calculated, based on power rating and measured sensitivity, exclusive of power compression.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason,
any current JBL product may differ in some respect from its published description, but will always equal or exceed the original
design specifications unless otherwise stated.
c CSS-H30 30 Watt Paging Horn
Frequency Response: Tap Selection:
1W (2.83V) input, 8 ohm setting, full-space (4p)

120

110
SPL (dB)

100

90

80
20 100 1000 10000 20000
Frequency (Hz)

Dimensions:
287
[11.3]
184
[7.3]
[8.2]
206

[8.9]
224
157
[6.2]

3 x 10.4 [0.41] dia

91
[1.5]
37

[3.6]

285
[11.2]
Dimensions in mm (inches)

JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2014 JBL Professional
SS CSS-H30
www.jblpro.com CRP
02/14

You might also like