Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    80214af FT

    Uploaded by

    Fadel Monner
    The document summarizes the characteristics of an APC Smart-UPS RT 10000VA 230V uninterruptible power supply. It has a rated power of 10000VA/8000W, supports 230V input and output voltage, and can provide battery backup power for up to 2 hours. Key components include four lead-acid battery slots, an internal bypass, and network management card for remote monitoring via software. Environmental protections include an IP20 rating and operating temperature range of 0-40°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    80214af FT

    Uploaded by

    Fadel Monner
    13 views4 pages
    The document summarizes the characteristics of an APC Smart-UPS RT 10000VA 230V uninterruptible power supply. It has a rated power of 10000VA/8000W, supports 230V input and output voltage, and can provide battery backup power for up to 2 hours. Key components include four lead-acid battery slots, an internal bypass, and network management card for remote monitoring via software. Environmental protections include an IP20 rating and operating temperature range of 0-40°C.

    Original Title

    80214AF-FT

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the characteristics of an APC Smart-UPS RT 10000VA 230V uninterruptible power supply. It has a rated power of 10000VA/8000W, supports 230V input and output voltage, and can provide battery backup power for up to 2 hours. Key components include four lead-acid battery slots, an internal bypass, and network management card for remote monitoring via software. Environmental protections include an IP20 rating and operating temperature range of 0-40°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views4 pages

    80214af FT

    Uploaded by

    Fadel Monner
    The document summarizes the characteristics of an APC Smart-UPS RT 10000VA 230V uninterruptible power supply. It has a rated power of 10000VA/8000W, supports 230V input and output voltage, and can provide battery backup power for up to 2 hours. Key components include four lead-acid battery slots, an internal bypass, and network management card for remote monitoring via software. Environmental protections include an IP20 rating and operating temperature range of 0-40°C.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Product data sheet SURT10000XLI

    Characteristics APC Smart-UPS RT 10000VA 230V

    Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
    Overview
    Presentation High density, double-conversion on-line power protection with scalable runtime.
    Lead time Usually in Stock

    General
    Provided equipment CD with software
    Service manual
    Smart UPS signalling RS-232 cable
    User manual
    Web/SNMP management card
    Performance multiplier 1
    Number of tare power 525 W
    Number of power module free slots 0
    Number of power module filled slots 0
    Redundant No
    Size UPS version Internetworking
    Server
    Telecom
    UPS size S
    Value multiplier 1

    Physical
    Number of rack unit 6U
    Colour Black
    Depth 73.6 cm
    Height 43.2 cm
    Mounting location Front
    Mounting preference Lower
    Product weight 110.91 kg
    Mounting mode Not rack-mountable

    Sep 30, 2021


    1
    Two post mountable 0
    USB compatible No
    Width 26.3 cm

    Input
    Network frequency 50/60 Hz +/- 5 Hz auto-sensing
    Number of input connectors 1 hard wire 3-wire (1P + N + E)
    1 hard wire 5-wire (3P + N + E)
    Input voltage limits 160...280 V
    Inputvolt_other 220 V
    240 V
    Input harmonic distortion Less than 7 % for full load
    Input voltage 230 V
    400 V 3 phases

    Output
    Rated power in W 8000 W
    Maximum configurable power in W 8000 W
    Harmonic distortion Less than 3 %
    Output frequency 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains
    Output voltage 220 V
    240 V
    Crest factor 3:1
    UPS type Double conversion online
    Wave type Sine wave
    Output connector type Hard wire 3-wire (H N + E) 1
    Nb of power socket outlets 4 IEC 60320 C13
    6 IEC Jumpers
    4 IEC 60320 C19
    Bypass type Internal bypass (automatic and manual)
    Curve equation Efficiency
    Curve fixed loss 0.0231
    Curve load maximum 100 %
    Curve load minimum 3 %
    Curve proportional loss 0.0304
    Curve square loss 0.038
    Curve X-axis maximum 100 %
    Curve test cond ID Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical
    environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output.
    Curve X-axis minimum 0 %
    Curve X-axis title Load
    Curve X-axis units Percentage
    Curve Y-axis maximum 100 %
    Curve Y-axis minimum 50 %
    Curve Y-axis title Efficiency
    Curve Y-axis units Percentage
    Graph display 1
    Output voltage 230 V
    Maximum configurable power in VA 10000 VA
    Rated power in VA 10000 VA

    Conformance
    Product certifications C-Tick
    CE
    GOST

    2
    VDE
    Standards EN 50091-1
    EN 50091-2
    EN 55022 class A
    EN 60950
    EN 61000-3-2

    Environmental
    Ambient air temperature for operation 0…40 °C
    Relative humidity 0…95 % non-condensing
    Operating altitude 0...10000 ft
    Ambient air temperature for storage -15…45 °C
    Storage Relative Humidity 0…95 % Non-condensing
    Storage altitude 0.00…15240.00 m
    Acoustic level 55 dBA
    Heat dissipation 2262 Btu/h
    Show note OP temperature No
    IP degree of protection IP20

    Batteries & Runtime


    Battery type Lead-acid battery
    Number of battery filled slots 4
    Number of battery free slots 0
    Battery recharge time 2 h
    Number of battery replacement 2
    quantity
    Additional information Configurable for 220 : 230 or 240 nominal output voltage
    Liquid value 0
    Battery curve C
    Battery charger power 955 W rated
    Battery power in VAH 1920 VAh runtime
    Battery life 3…5 year(s)
    Battery option SURT192XLBP 1 3840 VAh
    SURT192XLBP 2 5760 VAh
    SURT192XLBP 3 7680 VAh
    SURT192XLBP 4 9600 VAh
    SURT192XLBP 5 11520 VAh
    SURT192XLBP 6 13440 VAh
    SURT192XLBP 7 15360 VAh
    SURT192XLBP 10 21120 VAh
    Extended runtime 1

    Communications & Management


    Free slots 0
    Preinstalled device Network management card 2 with environmental monitoring
    Control panel LED status display with load and battery bar-graphs and on line : on battery : replace battery :
    overload and bypass indicators
    Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
    Emergency power off Yes

    Surge Protection and Filtering


    Surge energy rate 1265 J
    Noise suppression Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time :
    meets UL 1449

    3
    Packing Units
    Package 1 Weight 129.09 kg
    Package 1 Height 55.2 cm
    Package 1 width 59.7 cm
    Package 1 Length 99.1 cm
    Number of Units in Package 3 2

    Offer Sustainability
    Sustainable offer status Green Premium product
    REACh Regulation REACh Declaration
    EU RoHS Directive Compliant
    EU RoHS Declaration
    Mercury free Yes
    RoHS exemption information Yes
    Environmental Disclosure Product Environmental Profile
    Circularity Profile End of Life Information
    WEEE The product must be disposed on European Union markets following specific waste collection and
    never end up in rubbish bins
    Optimized Energy Efficiency Energy efficient product
    Take-back Take-back program available

    Contractual warranty
    Warranty 2 years repair or replace

    You might also like