REQUEST FOR INSPECTION

Saudi Aramco 6717-ENG (11/98) 726-200 (Inspection Department) Ref: SAEP 1150 & 1023 RFI No. DSI-SALCO-021

BI ______________
25-0013 JO _______
0002 Phase Construction
________ Title King Abdullah Petroleum Studies and Research Center
________________________________________________________________
To: Project Inspection Unit/ Mr. E.COMIA
___________ Civil Mech. Plumb. Elect. Other __________________
ARCHL'(HARDSCAPE)
Inspection/ monitoring is required on (date) _____________ at (time) ______________ prior to
for the following location/ equipment MATERIAL RECEIVING INSPECTION OF ROYAL GREY GRANITE PAVING (12X12X12CM) IN SALCO
______________________________________________________________________________
LAY DOWN AREA. TOTAL QUANTITY=3,SQ.M.
__________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________
Work Permit required: YES NO Project Quality Plan: Hold Point Witness Point

SAPMT representative has verified that the work is ready for CONTRACTOR has verified that the work to be inspected is
inspection and conforms to the project requirements. complete and in compliance with the following specifications:

SAPMT Name SAMUEL C. JUAN

__________________________________________ SAES/SAMS/Other # ITP-HARDSCAPE-002-01
__________________________________
Signature ___________________ Date __________________ Contractor/Company DSI/SALCO
__________________________________
Telephone ___________________ Fax __________________ QA/QC Name Rogelio Cerezo / Dante Madlos
__________________________________
QA/QC Signature ________________ Date ____________
This form received by the undersigned Inspection Department employee:
Name ______________________________ Signature ________________________ Date ________________ Time _____________

NOTE : Inspector's signature is for receiving this request only and not for approval or disapproval of the work or facility inspected.
Distribution: A. Original - Project Management B. 1st Copy - Inspection C. 2nd Copy - Contractor
REQUEST FOR INSPECTION
Saudi Aramco 6717-ENG (11/98) 726-200 (Inspection Department) Ref: SAEP 1150 & 1023 RFI No. DSI-SALCO-011

BI 25-0013
______________ JO 0002
_______ Phase Construction
________ Title King Abdullah Petroleum Studies and Research Center
________________________________________________________________
To: Project Inspection Unit/ Mr. ___________
E. COMIA Civil Mech. Plumb. Elect. Other
___ARCHL' (HARDSCAPE)______________
ARCHL'(HARDSCAPE)
Inspection/ monitoring is required on (date) __________________at (time) ______________ prior to
for the following location/ equipment SURFACE PREPARATION INSPECTION PRIOR TO INSTALLATION OF SAUDI BIANCO GRANITE IN AREA-9
__________________________________________________________________________________________________
__________________________________________________________________________________________________
`
__________________________________________________________________________________________________
Work Permit required: YES NO Project Quality Plan: Hold Point Witness Point

SAPMT representative has verified that the work is ready for

inspection and conforms to the project requirements.
CONTRACTOR has verified that the work to be inspected is
complete and in compliance with the following specifications:
SAPMT Name SAMUEL C. JUAN
__________________________________________ SAES/SAMS/Other # ITP-HARDSCAPE-002-01
__________________________________
Signature ___________________ Date __________________ Contractor/Company DSI/SALCO
__________________________________
Telephone ___________________ Fax __________________ QA/QC Name Rogelio Cerezo / Dante Madlos
__________________________________
QA/QC Signature ________________ Date ____________
This form received by the undersigned Inspection Department employee:
Name ______________________________ Signature ________________________ Date ________________ Time _____________

NOTE : Inspector's signature is for receiving this request only and not for approval or disapproval of the work or facility inspected.
Distribution: A. Original - Project Management B. 1st Copy - Inspection C. 2nd Copy - Contractor
REQUEST FOR INSPECTION
Saudi Aramco 6717-ENG (11/98) 726-200 (Inspection Department) Ref: SAEP 1150 & 1023 RFI No. DSI-SALCO-012

BI 25-0013
______________ JO 0002
_______ Phase Construction
________ Title King Abdullah Petroleum Studies and Research Center
________________________________________________________________
To: Project Inspection Unit/ Mr. ___________
E. COMIA Civil Mech. Plumb. Elect. Other __________________
ARCHL'(HARDSCAPE)
Inspection/ monitoring is required on (date) __________________at (time) ______________ prior to
for the following location/ equipment INSTALLATION INSPECTION OF SAUDI BIANCO GRANITE PAVING (120X120X120MM) AT AREA-9
__________________________________________________________________________________________________
(250X260X1000MM)
`
__________________________________________________________________________________________________
Work Permit required: YES NO Project Quality Plan: Hold Point Witness Point

SAPMT representative has verified that the work is ready for

inspection and conforms to the project requirements.
CONTRACTOR has verified that the work to be inspected is
complete and in compliance with the following specifications:
SAPMT Name SAMUEL C. JUAN
__________________________________________ SAES/SAMS/Other # ITP-HARDSACPE-002-01
__________________________________
Signature ___________________ Date __________________ Contractor/Company DSI/SALCO
__________________________________
Telephone ___________________ Fax __________________ QA/QC Name Rogelio Cerezo / Dante Madlos
__________________________________
QA/QC Signature ________________ Date ____________
This form received by the undersigned Inspection Department employee:
Name ______________________________ Signature ________________________ Date ________________ Time _____________

NOTE : Inspector's signature is for receiving this request only and not for approval or disapproval of the work or facility inspected.
Distribution: A. Original - Project Management B. 1st Copy - Inspection C. 2nd Copy - Contractor
REQUEST FOR INSPECTION
Saudi Aramco 6717-ENG (11/98) 726-200 (Inspection Department) Ref: SAEP 1150 & 1023 RFI No. ALF-PIPING-117-009

BI-10-01506 JO Phase Construction Title Residential and Industrial Complex Expansion

______________ _______ ________
To: Project Inspection Unit ___________ Civil Mech. X Plumb. Elect. Other
Inspection/ monitoring is required on (date) __________________
7-Aug-17 at (Time) ______________
9:30 AM Prior to Installation

for the following location/ equipment Material Receiving Inspection of dia 6" ASTM A53 GrB CS pipes Qty 23 Nos
__________________________________________________________________________________________________

__________________________________________________________________________________________________
Work Permit required: YES X NO Project Quality Plan: Hold Point X Witness Point

SAPMT representative has verified that the work is ready for CONTRACTOR has verified that the work to be inspected is complete
inspection and conforms to the project requirements. and in compliance with the following specifications:

SAPMT Name __________________________________________

Mr. Rafael SAES/SAMS/Other # SATIP-L-350-01 / SAIC-L-2005
__________________________________
Signature ___________________ Date __________________ Contractor/Company Alfanar
__________________________________
Telephone ___________________ Fax __________________ QA/QC Name M.BADIUDDIN
__________________________________
QA/QC Signature ________________ Date: ____________
This form received by the undersigned Inspection Department employee:
Name ______________________________ Signature ________________________ Date ________________ Time _____________

NOTE : Inspector's signature is for receiving this request only and not for approval or disapproval of the work or facility inspected.
Distribution: A. Original - Project Management B. 1st Copy - Inspection C. 2nd Copy - Contractor
REQUEST FOR INSPECTION
Saudi Aramco 6717-ENG (11/98) 726-200 (Inspection Department) Ref: SAEP 1150 & 1023 RFI No. MFC-SAL- 02

BI 25-0013 JO Phase Construction Title King Abdullah Petroleum Studies and Research Center
______________ _______ ________
To: Project Inspection Unit/ MR. ___________
Ayub Civil Mech. Plumb. Elect. Other
Inspection/ monitoring is required on (date) __________________ at (time) ______________ prior to
for the following location/ equipment Storage Handling and Preservation for Solar heating Collectors and Accessories
__________________________________________________________________________________________________
FP2117 192pcs , TRPN2 90pcs , TRPN1 30pcs, SS45N2 45pcs, SS45N1 120 pcs, VS-FP2117 80Pcs
__________________________________________________________________________________________________
Work Permit required: YES NO Project Quality Plan: Hold Point Witness Point

SAPMT representative has verified that the work is ready for CONTRACTOR has verified that the work to be inspected is
inspection and conforms to the project requirements. complete and in compliance with the following specifications:

SAPMT Name RICARDO M BARROSA

__________________________________________ SAES/SAMS/Other # SATIP-E-004-01
__________________________________
Signature ___________________ Date __________________ Contractor/Company SALCO
__________________________________
Telephone ___________________ Fax __________________ QA/QC Name Mohd Omer
__________________________________
QA/QC Signature ________________ Date: ____________
This form received by the undersigned Inspection Department employee:
Name ______________________________ Signature ________________________ Date ________________ Time _____________

NOTE : Inspector's signature is for receiving this request only and not for approval or disapproval of the work or facility inspected.
Distribution: A. Original - Project Management B. 1st Copy - Inspection C. 2nd Copy - Contractor