BESMM4 1-41 Sections Priced

BESMM4 Work Sections Master Bill
2 OFF-SITE MANUFACTURED MATERIALS, COMPONENTS OR BUILDINGS
Qty Unit Rate N K
OFF-SITE MANUFACTURED MATERIALS,

1.20 COMPONENTS OR BUILDINGS
1.20 Section Preambles / Notes
Drawings that must accompany this section of
1.2.0.1 measurement
The following drawings should be referred to as part
1.2.0.1.5 of the pricing of the Bills
All general arrangement drawings, site plans,
1.2.0.1.5.1 plans, sections and elevations individual details item 0.00
1.20 Madatory infomation
Mandatory information; The following information
1.2.2.5 must be provided as part of the pricing of the Bills
Kind and Quality of materials, method of fixing or

installation, connecting to other work or services
1.2.2.5.1 and special finishes. item 0.00
2.00 Minimum information
Minimum information that must be shown on the

drawings that accompany this section of
1.2.3.5 measurement include:
Major dimensions of components, structure or
1.2.3.5.1 unit, Location of component, structure or unit item 0.00
1.20 Component
Overall dimensions.; Description of component.;

Method of fixing/installing, height above structural
1.2.1 floor leve, services connectd 0 nr 0.00
1.2.2 Prefabricated structures
1.2.2.1 Roofs. [ Overall dimensions ] 0 nr 0.00
1.2.2.2 External walls. [ Overall dimensions ] 0 nr 0.00
1.2.2.3 Internal walls/partitions. [ Overall dimensions ] 0 nr 0.00
1.2.2.4 Floors. [ Overall dimensions ] 0 nr 0.00
1.2.2.5 Stairs. [ Overall dimensions ] 0 nr 0.00
1.2.2.6 Bridges. [ Overall dimensions ] 0 nr 0.00
1.2.2.7 Bridges. [ Overall dimensions ] 0 nr 0.00
1.2.2.8 Masts. [ Overall dimensions ] 0 nr 0.00
1.2.2.9 Other, type stated. [ Overall dimensions ] 0 nr 0.00
1.2.3 Prefabricated building units
1.2.3.1 Toilet/bathroom units. 0 nr 0.00
1.2.3.2 Sound proof rooms. 0 nr 0.00
1.2.3.3 Cold rooms. 0 nr 0.00
1.2.3.4 Spray booths. 0 nr 0.00
1.2.3.5 Kiosks. 0 nr 0.00
To Collection N 0.00
Page 1
Qty Unit Rate N K
OFF-SITE MANUFACTURED MATERIALS,

COMPONENTS OR BUILDINGS continued ...
Prefabricated building units continued ...
1.2.3.6 Other, type stated. 0 nr 0.00
1.2.4 Prefabricated buildings
1.2.4.1 Description of building 0 nr 0.00
Page 2
Qty Unit Rate N K
Collection
Total from Page 1 N 0.00
To Summary N 0.00
Page 3
3 DEMOLITIONS
Qty Unit Rate N K
3.00 DEMOLITIONS
3.00 Drawings
1.3.0.1.5 measurement
Locaion drawings, Drawings of existing structures
1.3.0.1.5.1 to show full extent of demolition. item 0.00
1.3.0.2.5 must be provided as part of the pricing of the Bills
Brief description and size of the structure to be

demolished, Extent of parts of structure to be
1.3.0.2.5.1 temporary retained item 0.00
Minimum information that must be shown on the

1.3.0.3.5 measurement include:
Lowest level of demolition, Extent of any

temporary works not at the discretion of the
contractor and position and extent of any
1.3.0.3.5.1 temporaryscreens, roof and the like. item 0.00
1.3.1 Demolitions
All structures, Individual structures or Part of
1.3.1.1 structures
1.3.1.1.1 Description of building(s) or part of building(s) Item 0.00
Lowest level to whch structure(s) are to be
1.3.1.1.2 demolished Item 0.00
1.3.2 Shoring, facade retention and temporary works
1.3.2.2 Temporary support of structures, roads and the like
1.3.2.2.1 Parts of existing building to be retained. item 0.00
1.3.2.2.2 Adjoining buildings not forming part of the works. item 0.00
1.3.2.2.3 Roads and other surfaces to be retained. item 0.00
1.3.2.2.4 Any other existing feature to be retained. item 0.00
1.3.2.3 Temporary works
1.3.2.3.1 Roofs. 0 m2 0.00
1.3.2.1.3.2 Screens. 0 m2 0.00
1.3.2.3.3 Roads. 0 m2 0.00
1.3.2.4 Decontamination
1.3.2.4.1 Removal of hazardous materials. item 0.00
1.3.2.4.2 Decontamination of existing premises. item 0.00
Page 4
1.3 DEMOLITIONS
Qty Unit Rate N K
DEMOLITIONS continued ...

Shoring, facade retention and continued ...
Decontamination continued ...
1.3.2.4.3 Infestation removal. item 0.00
1.3.2.5 Recycling
Detailed description of type of material to be

recycled and any limitations imposed by employer
1.3.2.5.1 or local authority item 0.00
Page 5
1.3 DEMOLITIONS
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 6
1.4 ALTERATIONS, REPAIRS AND CONSERVATION
Qty Unit Rate N K

4.00 Drawings
Drawings of existing structures to show full extent
1.4.0.1.5.1 of demolition. item 0.00
4.00 Madatory infomation to be supplied
Description of operations where not left to

discretion of the contractor; Details of all
materials to be set aside for subsequent re-use
including means of storage; Any restrictions on
method, sequence and or timing of the works;
Any restriction on methods of storage of
materials to be re-used or to remain property of
the employer; Compliance with all regulations
relating to the handling, transport and disposal of
1.4.0.2.5.1 hazardous waste materials. item 0.00
The following references are to the minimum level of

information that should be shown on drawings as
1.4.0.3.5 part of the Bills
Scope and location of work relative to existing
1.4.0.3.5.1 structures. item 0.00
1.4.1 Alteration work to existing buildings
1.4.1.1 Works of alteration
Dimensioned description sufficient to identify extent
1.4.1.1.1 and location of work. item 0.00
1.4.1.2 Removing
1.4.1.2.1 Fittings and fixtures
1.4.1.2.1.1 general debris ... Item 0.00
1.4.1.2.1.2 give detail 0 m2 0.00
1.4.1.2.2 Plumbing items or installations.
1.4.1.2.2.1 All items and installations . item 0.00
1.4.1.2.3 Electrical items or installations.
1.4.1.2.3.1 system . complete item 0.00
1.4.1.2.4 Finishes.
1.4.1.2.1.4.1 give detail 0 m2 0.00
1.4.1.2.5 Coverings.
1.4.1.2.5.1 give detail 0 m2 0.00
1.4.1.2.6 Pavings.
1.4.1.2.6.1 give detail item 0.00
Page 7
Qty Unit Rate N K
ALTERATIONS, REPAIRS AND continued ...

Alteration work to existing buildings continued ...
1.4.1.3 Cutting or forming openings
1.4.1.3.1 Dimensioned description. 0 m2 0.00
1.4.1.4 Cutting to form recesses
1.4.1.1.4.1 Dimensioned description. 0 m2 0.00
1.4.1.5 Cutting back
1.4.1.5.1 Cutting to form openings through ... x ... x ... deep item 0.00
1.4.1.5.2 Dimensioned description. 0 m2 0.00
1.4.1.6 Filling in openings
1.4.1.6.1 Dimensioned description. item 0.00
1.4.1.7 Filling in recesses
1.4.1.8 Removing existing and replacing
Cutting out decayed defective and cracked work
1.4.1.8.1 and replacing; ... thick. Item 0.00
1.4.1.8.2 and replacing; dimensioned description Item 0.00
1.4.1.8.3 and replacing; dimensioned description Item 0.00
Preparing existing structures for connection or
1.4.1.9 attachment of new work
1.4.1.9.1 Dimensioned description. 0 nr 0.00
1.4.2 Repairs/cleaning/renovating and conserving
1.4.2.10 Repairing
1.4.2.10.1 ... x ... x ... [description] 0 nr 0.00
1.4.2.11 Repointing joints
1.4.2.11.1 raking out joints [... x ...] deep 0m 0.00
1.4.2.12 Repointing
1.4.2.12.1 ... x ... x ... 0 nr 0.00
1.4.2.13 Resin or cement impregnation/injection
1.4.2.13.1 ... thick 0 m2 0.00
1.4.2.14 Inserting new walls ties
1.4.2.14.1 Size and type of new ties. 0 m2 0.00
1.4.2.15 Re-dressing existing flashings and the like
1.4.2.15.1 ... girth ... thick. 0m 0.00
Page 8
Qty Unit Rate N K
ALTERATIONS, REPAIRS AND continued ...

Repairs/cleaning/renovating and continued ...
1.4.2.16 Damp-proof course renewal
1.4.2.16.1 Method of renewal or insertion stated. 0m 0.00
1.4.2.18 Cleaning surfaces
1.4.2.18.1 Over 500mm wide. 0 m2 0.00
1.4.2.18.2 Not exceeding 500mm wide: ... wide 0m 0.00
1.4.2.19 Removing stains
1.4.2.19.1 Over 500mm wide. 0 m2 0.00
1.4.2.19.2 Not exceeding 500mm wide: ...wide 0m 0.00
1.4.2.21 Renovating
1.4.2.21.1 ... thick 0 m2 0.00
1.4.2.22 Conserving
1.4.2.22.1 ... thick 0 m2 0.00
1.4.3 Decontamination
1.4.3.23 Decontamination
1.4.3.23.1 Removal of toxic/hazardous materials. item 0.00
1.4.3.23.2 Decontamination of existing premises. item 0.00
1.4.3.23.3 Infestation removal/eradication. item 0.00
1.4.3.23.4 Fungus removal/eradication. item 0.00
1.4.3.24 Temporary works Roads.
1.4.3.24.1 Roofs. 0 m2 0.00
1.4.3.24.2 Screens. 0 m2 0.00
1.4.3.21.4.3 Floors. 0 m2 0.00
1.4.4 Re-cycling
1.4.4.25 Recycling
Detailed description of type of material to be

recycled and any limitations imposed by employer
1.4.4.1.25.1 or local authority. item 0.00
Page 9
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 10
1.5 EXCAVATING & FILLING
Qty Unit Rate N K

1.50 Drawings
Drawings; that must accompany this section of
1.5.0.1.1.5 measurement
Site plan(s), showing all major excavations;

Location of spoil heaps if not left to the discretion
1.5.0.1.1.5.1 of the contractor and Existing site survey. item 0.00
Ground water Level(s) and date(s) established;

Starting level of each kind of excavation and
1.5.0.2.1.5.1 Levels of rock where applicable item 0.00
Minimum information; The following references are

to the minimum level of information that should be
1.5.0.3.1.5 shown on drawings as part of the Bills
Original and proposed ground levels; Any item(s)

that must remain on site during the works and be
protected from damages; Any item(s) adjacent to
site that may impact on the works; Details of trial
pits or boreholes including their location; Details
of live over or underground services including their
location and Pile sizes and their locations whwre
1.5.0.3.1.5.1 applicable. item 0.00
1.5.1 Site clearance/preparation
1.5.1.1 Preliminary sitework
1.5.1.1.1 Locating underground services. item 0.00
Trial pits to locate existing services or determine
1.5.1.1.2 ground conditions. 0 nr 0.00
1.5.1.1.3 Boreholes to determine ground conditions. 0 nr 0.00
1.5.1.2 Removing trees
1.5.1.2.1 Girth 500mm to 1,500mm. 0 nr 0.00
1.5.1.2.2 Girth 1,500 to 3,000mm. 0 nr 0.00
1.5.1.2.3 Girth over 3,000mm, stated in 1,500mm stages. 0 nr 0.00
1.5.1.3 Removing tree stumps
1.5.1.3.1 Girth 500mm to 1,500mm. 0 nr 0.00
1.5.1.3.2 Girth 1,500 to 3,000mm. 0 nr 0.00
1.5.1.3.3 Girth over 3,000mm, stated in 1,500mm stages. 0 nr 0.00
1.5.1.4 Site clearance
Clear site of all vegetation and other growth and
1.5.1.4.1 dispose off site. 0 m2 0.00
Page 11
Qty Unit Rate N K
EXCAVATING & FILLING continued ...

Site clearance/preparation continued ...
1.5.1.5 Site preparation
1.5.1.5.1 Lifting turf for preservation: ... thick. 0 m2 0.00
1.5.1.5.2 Remove topsoil to ... depth 0 m2 0.00
1.5.1.5.3 Remove ... thick hard surface paving 0 m2 0.00
1.5.1.5.4 Remove specific items. 0 nr 0.00
1.5.2 Excavations
Excavation, commencing level stated if not original
1.5.2.6 ground level
1.5.2.6.1 Bulk excavation. 0 m3 0.00
1.5.2.6.2 Foundation excavation. 0 m3 0.00
1.5.2.7 Extra over all types of excavation irrespective of depth
1.5.2.7.1 Excavating in. 0 m3 0.00
1.5.2.7.2 Breaking up. 0 m3 0.00
1.5.2.7.3 Excavating alongside existing underground services 0m 0.00
1.5.2.7.4 Excavating across existing underground services 0 nr 0.00
Support to face(s) of excavation where not at the
1.5.2.8 discretion of the contractor
1.5.2.8.1 ... maximum depth, located.... 0 m2 0.00
1.5.3 Disposal
1.5.3.9 Disposal
1.5.3.9.1 Ground water item 0.00
1.5.3.9.2 Excavated material off site. 0 m3 0.00
1.5.3.10 Retaining excavated material on site
1.5.3.10.1 Topsoil 0 m3 0.00
1.5.3.10.2 All other excavated material 0 m3 0.00
1.5.4 Fillings
1.5.4.11 Filling obtained from excavated material
Final thickness of filling not exceeding 500mm
1.5.4.11.1 deep, ... finished thickness. 0 m2 0.00
1.5.4.11.2 Final thickness of filling exceeding 500mm deep. 0 m3 0.00
1.5.4.12 Imported filling (select spec)
Blinding bed not exceeding 50mm thick,... finished
1.5.4.12.1 thickness. 0 m3 0.00
Beds over 50mm thick but not exceeding 500mm
1.5.4.12.2 deep, ... finished thickness 0 m3 0.00
1.5.4.12.3 Beds exceeding 500mm deep. 0 m3 0.00
Page 12
Qty Unit Rate N K
EXCAVATING & FILLING continued ...

1.5.5 Membranes
1.5.5.13 Geotextile fabric.
1.5.5.13.1 Not exceeding 500mm wide, ... thick 0m 0.00
1.5.5.13.2 Not exceeding 500mm wide, ... gauge 0m 0.00
1.5.5.14 Radon barrier.
1.5.5.14.2 Over 500mm wide, ... thick 0 m2 0.00
1.5.5.15 Methane barrier.
1.5.5.16 Damp proof membrane
1.5.5.16.4 Over 500mm wide, ... gauge 0 m2 0.00
1.5.5.16.5 Over 500mm wide, thickness or gauge stated 0 m2 0.00
1.5.5.17 Ground movement protection boards
1.5.5.17.4 Over 500mm wide, ... gauge 0 m2 0.00
1.5.5.18 Any other fabric, membrane or board: type stated.
1.5.5.19 Ground stabilisation meshes and the like, type stated
1.5.5.19.2 Over 500mm wide, thickness or gauge stated 0 m2 0.00
1.5.6 Cutting pile tops
1.5.6.20 Cutting off tops of piles irrespective of length
1.5.6.20.1 size stated 0 nr 0.00
Page 13
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 14
1.6 GROUND REMEDIATION AND SOIL STABILISATION
Qty Unit Rate N K

6.00 Drawings
Drawings; That must accompany this section of
1.6.0.1.5 Measurement
1.6.0.1.5.1 Site plans showing location of work(s) item 0.00
Ground Conditions; Ground water level(s) and

date(s) established and Starting level of each
1.6.0.2.5.1 type of excavation. item 0.00
Minimum information thant must be shown on the

1.6.0.3.5 measurement.
Original and proposed ground levels; Any item(s)

that must remain on site during the works and be
protected from damage; Any item(s) adjacent to
site that may impact on the works; Detaails of
trial pits or boreholes including their location;
Details of live over or underground services
including their location and Pile size and other
1.6.0.3.5.1 locations where applicable item 0.00
1.6.1 Site dewatering
1.6.1.1 Area of site to be dewatered. item 0.00
1.6.2 Sterilisation
1.6.2.1 Maximum depth of ground to be treated 0 m3 0.00
1.6.3 Chemical neutralising
1.6.3.1 Maximum depth of ground to be treated 0 m3 0.00
1.6.4 Freezing
1.6.4.1 ... maximum depth of ground to be treated. 0 m3 0.00
1.6.5 Ground gas venting
1.6.5.1 Type of gas to be vented. 0 m2 0.00
1.6.6 Soil nailing
1.6.6.1 Area of site to be treated 0 m2 0.00
1.6.7 Ground anchors
1.6.7.1 Diameter and length of borehole 0 Nr 0.00
1.6.8 Pressure grouting/ ground permeation
1.6.8.1 Area and depth of site to be treated 0 m2 0.00
Page 15
Qty Unit Rate N K
GROUND REMEDIATION AND SOIL continued ...

1.6.9 Compacting
1.6.91 Area of site to be treated 0 m2 0.00
Stabilising soil in situ by incorporating cement with a
1.6.920 rotavator
1.6.91 Area of site to be treated 0 m2 0.00
Page 16
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 17
1.7 PILING
Qty Unit Rate N K
7.00 PILING
7.00 Drawings
1.7.01.5 measurement
Site plan showing site boundary and any adjacent

buildings or features might or be affected by the
1.7.01.5.1 piling item 0.00
1.7.02.5 To be provided
Types of piles; Ground water level(s) and date(s)

established; Nature of ground; Commencing
levels from which work is expected to begin;
1.7.02.5.1 Details of compaction; Limitation on headroom. item 0.00
Thant must be shown on the drawings tha
1.7.03.5 accompany this section of measurement.
Positions of piles; positions of existing building
1.7.03.5.1 adjacent to the site; position of existing services. item 0.00
1.7.1 Interlocking sheet piles
1.7.1.1 Interlocking sheet (specification)
Total driven area, maximum length stated.; Section

modulus and cross section size, or section
1.7.1.1.1 reference stated. 0 m2 0.00
1.7.2 Bored piles
1.7.2.3 Bored piles (specification)
1.7.2.3.1 Type stated.; ... Nominal size [or diameter] 0m 0.00
Total bored or driven length: maximum length
1.7.2.3.2 stated 0m 0.00
1.7.2.3.3 Total concreted length 0m 0.00
1.7.2.3.4 Total number 0m 0.00
1.7.3 Driven piles
1.7.3.3 Driven piles (specification)
Total bored or driven length: maximum length
1.7.3.3.2 stated 0m 0.00
1.7.3.3.3 Total concreted length 0m 0.00
1.7.3.3.4 Total number 0m 0.00
1.7.4 Other, type stated
1.7.4.4 Other, type stated (specification)
Page 18
1.7 PILING
Qty Unit Rate N K
PILING continued ...

1.7.5 Vibro-compacted piles
1.7.5.5 Vibro-compacted piles (speciation)
1.7.5.5.1 ... Nominal diameter.; ... total Nr. 0m 0.00
1.7.6 Vibro-compacted trench fill
1.7.6.6 Vibro-compacted trench fill (specification)
1.7.6.6.1 Nominal width and depth stated. 0m 0.00
1.7.7 Extra over piling
1.7.7.1 Enlarged bases. 0 nr 0.00
1.7.7.2 Enlarged heads. 0 nr 0.00
1.7.7.3 Pile extensions. 0m 0.00
1.7.8 Reinforcement to insitu concrete piles
1.7.8.1 Nominal size and type of bars stated. 0.00 t 0.00
1.7.9 Breaking through obstructions
1.7.9.1 Rig standing 0 hr 0.00
1.7.10 Disposal of excavated materials
1.7.10.1 Off site. 0 m3 0.00
1.7.10.2 On site. 0 m3 0.00
1.7.11 Delays
1.7.11.1 Rig standing 0 hr 0.00
1.7.12 Tests
1.7.12.1 Details stated. 0 nr 0.00
Page 19
1.7 PILING
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 20
1.8 UNDERPINNING
Qty Unit Rate N K
8.00 UNDERPINNING
1.8.0.1 Drawings
Drawings; that must be accompany this section of
1.8.0.1.5.1 Location drawings and detailed section(s) item 0.00
1.8.0.2.5 Mandatory information; to be provided
Limit of length of work to be carried out in one

operation; maximum number of sections to be
carried out at any one time; Ground conditions
1.8.0.2.5.1 including anticipated stability of excavation item 0.00
Minimum information; that must be shown on the

1.8.0.3.5 measurment
Extent and method of work; Details of existing
1.8.0.3.5.1 structure to be underpinned item 0.00
1.8.1 Underpinning
1.8.1.1 Foundations.
Brief description of work stating depth and method
1.8.1.1.1 of underpinning. Curved work. 0m 0.00
Method, if not left to discretion of contractor, may
1.8.1.1.2 be given by reference to drawing. 0m 0.00
1.8.1.2 Walls.
1.8.1.2.1 of underpinning. Curved work. 0m 0.00
1.8.1.2.2 be given by reference to drawing. 0m 0.00
1.8.1.3 Bases.
1.8.1.3.1 of underpinning. Curved work. 0 nr 0.00
1.8.1.3.2 be given by reference to drawing. 0 nr 0.00
1.8.3 Reinforced in-situ concrete
1.8.3.1 Mass concrete
1.8.3.1.1 Mass concrete; Any thickness; In filling voids. 0 m3 0.00
1.8.5 Plain formwork.
1.8.5.13 Sides of foundations and bases
1.8.5.13.1 Sides of foundations and bases; > 500 high. 0 m2 0.00
Page 21
1.8 UNDERPINNING
Qty Unit Rate N K
UNDERPINNING continued ...

1.8.7 Reinforcement
1.8.7.34 High yield steel bars
1.8.7.1.34.1 High yield steel bars; [...] Nominal size 0.00 t 0.00
1.8.8 Brick/Block walling
Walls (Select spec- Common / Engineering / Facing
1.8.8.1 Brickwork / Blockwork)
1.8.8.1.1 Walls; 102.5 mm thick brickwork 0 m2 0.00
1.8.12 Asphalt tanking or damp proofing
1.8.12.1 Coverings > 500mm wide
1.8.12.1.1 Horizontal. 0 m2 0.00
Page 22
1.8 UNDERPINNING
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 23
1.9 DIAPHRAGM WALLS & EMBEDDED RETAINING WALLS
Qty Unit Rate N K
DIAPHRAGM WALLS & EMBEDDED RETAINING

1.90 WALLS
1.90 Drawings
1.9.1.5 measurement
Location drawings; site plans showing boundary

and any djacent buildings or features that might
affect or be affected by the construction of the
1.9.1.5.1 diaphragm walls item 0.00
1.9.2.5 Mandatory information to be provided
Ground conditions including anticipated stability

of excavations; Ground water level(s) and date(s)
established; limit of length of work to be carried
out in one operation; Maximum number of
sections to be carried out at any one time;
1.9.2.5.1 Starting level of each type of excavation. item 0.00
Minimum information; tha must be shown on the
1.9.3.5 drawings accompany this section of measurement
1.9.3.5.1 Extent of work. item 0.00
1.9.1 Diaphragm walls (spec...)
1.9.1.1 Walls
Walls; ... mm thick excavating commencing ...; ...
1.9.1.1.1 maximum depth 0 m2 0.00
1.9.1.2 Extra over excavation and disposal
1.9.1.2.1 Breaking out hard materials. 0 m3 0.00
1.9.1.2.2 Excavating in hazardous material. 0 m3 0.00
Breaking up hard surface pavings, thickness
1.9.1.2.3 stated. 0 m2 0.00
1.9.1.3 Joints
1.9.1.3.1 Dimensioned description. 0m 0.00
1.9.1.4 Trimming and cleaning exposed faces
1.9.1.4.1 Details stated. 0 m2 0.00
1.9.1.5 Delays
1.9.1.5.1 Authorised standing time. 0 hr 0.00
1.9.1.6 Tests
1.9.1.6.1 Details stated. item 0.00
Page 24
9 DIAPHRAGM WALLS & EMBEDDED RETAINING WALLS
Qty Unit Rate N K
DIAPHRAGM WALLS & EMBEDDED RETAINING

WALLS continued ...
1.9.2 Embedded Retaining Walls
1.9.2.1 Walls
Walls; ... mm thick excavating commencing ...; ...
1.9.2.1.1 maximum depth 0 m2 0.00
1.9.2.2 Extra over excavation and disposal
1.9.2.2.2 Excavating in hazardous material. 0 m3 0.00
Breaking up hard surface pavings, thickness
1.9.2.2.3 stated. 0 m2 0.00
1.9.2.3 Joints
1.9.2.4 Trimming and cleaning exposed faces
1.9.2.4.1 Details stated. 0 m2 0.00
1.9.2.5 Delays
1.9.2.6 Tests
Page 25
1.9 DIAPHRAGM WALLS & EMBEDDED RETAINING WALLS
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 26
1.10 CRIB WALLS, GABIONS & REINFORCED EARTH
Qty Unit Rate N K
1.10 CRIB WALLS, GABIONS & REINFORCED EARTH

1.10 Section Preambles /Notes
1.10 Drawings
Plan showing scope and location of each type of
1.10.0.1.5.1 work item 0.00
1.10.0.2.5.1 Kind and quality of materials item 0.00

Original ground levels; finished ground levels and
1.10.0.3.5.1 condition of ground. item 0.00
1.10.1 Crib walls
1.10.1.1 Crib walls
1.10.1.1.1 Crib walls; Thickness stated. 0 m2 0.00
1.10.1.2 Extra for
1.10.1.2.1 Extra for; Ends. 0m 0.00
1.10.1.2.2 Extra for; Corners irrespective of angle. 0m 0.00
1.10.2 Gabions
1.10.2.3 Gabion basket walls
1.10.2.3.1 [Basket size stated][gauge of wire][base ... wide] 0 m2 0.00
1.10.3 Earth reinforcement
1.10.3.4 Earth reinforcement
1.10.3.4.1 Mesh. 0 m2 0.00
1.10.3.4.2 Fabric. 0 m2 0.00
To Summary N 0.00
Page 27
1.11 IN-SITU CONCRETE WORKS
Qty Unit Rate N K

1.11 Drawings
measuremen
1.11.1.1.5.1 General arrangement drawings item 0.00
Kind quality and size of materials; details of test

materials; details of test finished work; limitations
on method sequence, speed or size of pouring;
method of compaction; method of curing and
1.11.1.2.5.1 details of watertightness item 0.00

drawings that accomany this section of
Realative position of all members; the size of

members; the thickness of slab and the
1.11.1.3.5.1 permissibe loads in relation to casting times item 0.00
Plain and /or Reinforced in-situ concrete (select
1.11.1 spec)
1.11.1.1 Mass concrete
1.11.1.1.1 Mass concrete; Any thickness; In filling voids. 0 m3 0.00
1.11.1.1.2 Mass concrete; Any thickness; In trench filling. 0 m3 0.00
Mass concrete; Any thickness; In any other
1.11.1.1.3 situation: details stated. 0 m3 0.00
1.11.1.3 Sloping work <= 15 deg
1.11.1.3.1 Sloping work <= 15 deg; <= 300 thick; In blinding. 0 m3 0.00
Sloping work <= 15 deg; <= 300 thick; In
1.11.1.3.2 structures. 0 m3 0.00
Sloping work <= 15 deg; <= 300 thick; In
1.11.1.3.3 staircases 0 m3 0.00
1.11.1.3.4 Sloping work <= 15 deg; > 300 thick; In blinding. 0 m3 0.00
1.11.1.3.5 Sloping work <= 15 deg; > 300 thick; In structures. 0 m3 0.00
1.11.1.3.6 Sloping work <= 15 deg; > 300 thick; In staircases 0 m3 0.00
1.11.1.4 Sloping work > 15 Deg
1.11.1.4.1 Sloping work > 15 Deg; <= 300 thick; In blinding. 0 m3 0.00
Sloping work > 15 Deg; <= 300 thick; In
1.11.1.4.2 structures. 0 m3 0.00
1.11.1.4.3 Sloping work > 15 Deg; <= 300 thick; In staircases 0 m3 0.00
Page 28
11 IN-SITU CONCRETE WORKS
Qty Unit Rate N K
IN-SITU CONCRETE WORKS continued ...

Plain and /or Reinforced in-situ concrete (select
spec) continued ...
Sloping work > 15 Deg continued ...
1.11.1.4.4 Sloping work > 15 Deg; > 300 thick; In blinding. 0 m3 0.00
1.11.1.4.5 Sloping work > 15 Deg; > 300 thick; In staircases 0 m3 0.00
1.11.2.2 Horizontal work
1.11.2.2.1 Horizontal work; <= 300 thick; In blinding. 0 m3 0.00
1.11.2.2.2 Horizontal work; <= 300 thick; In structures. 0 m3 0.00
1.11.2.5 Vertical work
1.11.2.5.1 Vertical work <= 300 thick. 0 m3 0.00
1.11.2.5.2 Vertical work > 300 thick. 0 m3 0.00
1.11.4 Sprayed in-situ concrete
1.11.4.7 Sprayed in-situ concrete
1.11.4.7.1 Sprayed in-situ concrete; [...] thick. Slabs. 0 m2 0.00
1.11.4.7.2 Sprayed in-situ concrete; [...] thick. Walls. 0 m2 0.00
1.11.4.7.3 Sprayed in-situ concrete; [...] thick. Beams. 0 m2 0.00
1.11.4.7.4 Sprayed in-situ concrete; [...] thick. Columns. 0 m2 0.00
1.11.5 Surface finishes to in-situ concrete
1.11.5.8 Trowelling
1.11.5.8.1 To top surfaces. 0 m2 0.00
1.11.5.8.2 To faces. 0 m2 0.00
1.11.5.8.3 To soffits. 0 m2 0.00
1.11.5.9 Power floating
1.11.5.9.1 To top surfaces. 0 m2 0.00
1.11.5.9.2 To faces. 0 m2 0.00
1.11.5.9.3 To soffits. 0 m2 0.00
1.11.5.10 Hacking
1.11.5.10.1 To top surfaces. 0 m2 0.00
1.11.5.10.2 To faces. 0 m2 0.00
1.11.5.10.3 To soffits. 0 m2 0.00
1.11.5.11 Grinding
1.11.5.11.1 To top surfaces. 0 m2 0.00
1.11.5.11.2 To faces. 0 m2 0.00
1.11.5.11.3 To soffits. 0 m2 0.00
Any other surface treatment not left to discretion of
1.11.5.12 the contractor
1.11.5.12.1 the contractor; To top surfaces. 0 m2 0.00
Page 29
Qty Unit Rate N K

Surface finishes to in-situ concrete continued ...
the contractor continued ...
1.11.5.12.2 the contractor; To faces. 0 m2 0.00
1.11.5.12.3 the contractor; To soffits. 0 m2 0.00
1.11.6 Plain formwork.
1.11.6.13 Sides of foundations and bases
Sides of foundations and bases; <= 500 high: [...]
1.11.6.13.1 wide. 0m 0.00
1.11.6.13.2 Sides of foundations and bases; > 500 high. 0 m2 0.00
1.11.6.14 Edges of horizontal work
1.11.6.14.1 Edges of horizontal work; <= 500 high: [...] wide. 0m 0.00
1.11.6.14.2 Edges of horizontal work; > 500 high. 0 m2 0.00
1.11.6.15 Soffits of horizontal work
1.11.6.15.1 Soffits of horizontal work; for concrete <= 300 thick. 0 m2 0.00
Soffits of horizontal work; for concrete 300 to 450
1.11.6.15.2 thick. 0 m2 0.00
1.11.6.15.3 Soffits of horizontal work; for concrete > 450 thick. 0 m2 0.00
Soffits of troughed or waffled horizontal work, details
1.11.6.16 described
Soffits of troughed or waffled horizontal work,
1.11.6.16.1 details described; for concrete <= 300 thick. 0 m2 0.00
1.11.6.16.2 details described; for concrete 300 to 450 thick. 0 m2 0.00
1.11.6.16.3 details described; for concrete > 450 thick. 0 m2 0.00
1.11.6.17 Sides and soffits of isolated beams
Sides and soffits of isolated beams; Regular:
1.11.6.17.1 shape stated. 0 m2 0.00
Sides and soffits of isolated beams; Irregular
1.11.6.17.2 shaped, dimensioned description or diagram. 0 m2 0.00
1.11.6.18 Sides and soffits of attached beams
Sides and soffits of attached beams; regular:
1.11.6.18.1 shape stated. 0 m2 0.00
Sides and soffits of attached beams; irregular
1.11.6.18.2 shaped, dimensioned description or diagram. 0 m2 0.00
1.11.6.19 Sides of upstand beams
1.11.6.19.1 Sides of upstand beams; regular: shape stated. 0 m2 0.00
Page 30
Qty Unit Rate N K

Plain formwork. continued ...
Sides of upstand beams continued ...
Sides of upstand beams; irregular shaped,
1.11.6.19.2 dimensioned description or diagram. 0 m2 0.00
1.11.6.20 Sides of isolated columns
Sides of isolated columns, [...] nr; regular: shape
1.11.6.20.1 stated. 0 m2 0.00
Sides of isolated columns, [...] nr; irregular shaped,
1.11.6.21 Sides of attached columns
1.11.6.21.1 Sides of attached columns; regular: shape stated. 0 m2 0.00
Sides of attached columns; irregular shaped,
Sides of attached columns; irregular shaped,
1.11.6.22 Faces of walls and other vertical work
1.11.6.22.1 Vertical. 0 m2 0.00
1.11.6.23 Extra over
Extra over; Openings for doors or the like:
1.11.6.23.1 thickness of wall stated. 0 nr 0.00
1.11.6.24 Wall ends, soffits and steps in walls
Wall ends, soffits and steps in walls; <= 500 wide,
1.11.6.24.1 [...] wide. 0m 0.00
1.11.6.24.2 Wall ends, soffits and steps in walls; > 500 wide. 0 m2 0.00
1.11.6.25 Soffits of sloping work
1.11.6.1.25.1 Soffits of sloping work; Sloping one way. 0 m2 0.00
1.11.6.1.25.2 Soffits of sloping work; Sloping two ways. 0 m2 0.00
1.11.6.26 Staircase strings and the like
1.11.6.1.26.1 Staircase strings and the like; Maximum [...] wide. 0m 0.00
1.11.6.27 Staircase risers and the like
1.11.6.1.27.1 Staircase risers and the like; Vertical: [...] wide. 0m 0.00
1.11.6.1.27.2 Staircase risers and the like; Undercut: [...] wide. 0m 0.00
1.11.6.28 Sloping top surfaces
1.11.6.1.28.1 Sloping top surfaces; <= 15 deg. 0 m2 0.00
1.11.6.28.2 Sloping top surfaces; > 15 deg. 0 m2 0.00
1.11.6.29 Steps in top surfaces
1.11.6.1.29.1 Steps in top surfaces; <= 500 high: [...] wide. 0m 0.00
1.11.6.29.2 Steps in top surfaces; > 500 high. 0m 0.00
Page 31
Qty Unit Rate N K

Plain formwork. continued ...
1.11.6.30 Steps in soffits
1.11.6.1.30.1 Steps in soffits; <= 500 high: [...] wide. 0m 0.00
1.11.6.30.2 Steps in soffits; > 500 high. 0m 0.00
1.11.6.31 Complex shapes
Dimensioned description or
1.11.6.1.31.1 diagram. 0 nr 0.00
1.11.6.32 Wall kickers
1.11.6.1.32.1 Wall kickers; Plain. 0m 0.00
1.11.6.32.2 Wall kickers; Suspended. 0m 0.00
1.11.8 Reinforcement
1.11.8.34 High yield steel bars (slect spec)
1.11.8.1.34.1 High yield steel bars; [...] Nominal size 0.00 t 0.00
1.11.8.35 Accessories not at the discretion of the contractor
Accessories not at the discretion of the contractor;
1.11.8.1.35.1 [...] Nominal size 0 Nr 0.00
1.11.8.36 Pre/Post-tensioned members
1.11.8.1.36.1 Dimensioned description. 0 nr 0.00
1.11.8.37 Mesh
Stainless steel reinforcement as E30/170; Weight
1.11.8.1.37.1 per m2; ... minimum laps. 0 m2 0.00
Steel fabric reinforcement to B.S.4483; Weight per
1.11.8.1.37.2 m2; ... minimum laps. 0 m2 0.00
Fabric reinforcement as E30/210; Weight per m2;
1.11.8.1.37.3 ... minimum laps. 0 m2 0.00
Mesh; Weight per m2; {fabric reference]; ...
1.11.8.1.37.4 minimum laps. 0 m2 0.00
1.11.9 Designed joints in in-situ concrete
1.11.9.38 Plain
1.11.9.1.38.1 Plain; Dimensioned description; [...] total depth. 0m 0.00
1.11.9.39 Formed
1.11.9.1.39.1 Formed; Dimensioned description; [...] total depth. 0m 0.00
1.11.9.40 Cut
1.11.9.1.40.1 Cut; Dimensioned description; [...] total depth. 0m 0.00
1.11.9.41 Type or proprietary reference stated
Type or proprietary reference stated; Dimensioned
1.11.9.1.41.1 description. 0 m2 0.00
1.11.9.1.41.2 description. 0m 0.00
Page 32
Qty Unit Rate N K

Designed joints in in-situ concrete continued ...
Type or proprietary reference stated continued ...
1.11.9.1.41.3 description. 0 nr 0.00
11.10 In-situ concrete sundries
1.11.10.42 Grouting
Grouting with epoxy resin mortar; Dimensioned
1.11.10.42.1 description 0 nr 0.00
Grouting with epoxy resin mortar; Dimensioned
1.11.10.42.2 description 0 nr 0.00
Grouting with cement and sand as G10/441;
1.11.10.42.3 Dimensioned description 0 nr 0.00
1.11.10.43 Filling mortices or holes
Filling mortices or holes with cement and sand
1.11.10.43.1 (1:2); Dimensioned description 0 nr 0.00
1.11.10.44 Filling chases
Filling chases with cement and sand (1:2;
1.11.10.44.1 Dimensioned description 0m 0.00
Page 33
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 34
1.12 COMPOSITE / PRECAST CONCRETE
Qty Unit Rate N K

1.12 Drawings
General arrangement drawings; Specific drawings
1.12.0.1.5.1 or details relating to precast works. item 0.00
Size and spacing of planks and blocks; method

of compaction and curing; bedded and fixing;
surface finishes; kind and quality of reinforcement
or pre/post tensioning, spacing and stresses;
finish of exposed surfaces; details of test of
1.12.0.2.5.1 materials; details of tests of finished work. item 0.00

The relative position of concrete members; size of

members; the thickness of slabs and panels; the
1.12.0.3.5.1 permissible loads. item 0.00
Composite / precast concrete walls, partitions &
1.12.1 panels
1.12.1.1 Composite Concrete work
1.12.1.1.1 Generally
1.12.1.1.1.1 [Nature and composition of work] [... thick] 0 m2 0.00
1.12.1.2 Designed Joints
1.12.1.2.1 [Dimensions] 0m 0.00
1.12.1.3 Holding down or tie straps
1.12.1.3.1 [Dimensioned description] 0 nr 0.00
1.12.2 Composite / precast concrete decking & flooring
1.12.2.1 Composite concrete work
1.12.2.1.1 Slabs
1.12.2.1.2 Floors
1.12.2.1.3 Decking
Page 35
Qty Unit Rate N K
COMPOSITE / PRECAST CONCRETE continued ...

Composite / precast concrete decking continued ...
1.12.2.2.1 [Dimensions] 0m 0.00
1.12.3 Other precast/composite concrete work
1.12.3.1 Composite concrete work
1.12.3.1.1 [Nature and composition of work] [... thick] 0 m2 0.00
1.12.3.2.1 [Dimensions] 0m 0.00
Page 36
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 37
1.13 PRECAST CONCRETE
Qty Unit Rate N K

1.13 Drawings
General arrangement drawings; Specific drawings
1.13.0.1.5.1 or details relating to precast works. item 0.00
1.13.0.2.5 To be provided
Method of compaction and curing; bedding and

fixing; surface finishes; kind and quality of
reinforcement or pre/post tensioning, spacing and
stresses; finishes of exposed surfaces; details of
1.13.0.2.5.1 test of materials; details of test of finished work. item 0.00
Minimum information; That must be shown on the

The relative position of concrete members; the

thickness or size of members; the thickness of
slab and panels; the permissible loads and full
1.13.0.3.5.1 details of anchorages, duct shaeting and vents. item 0.00
1.13.1 Precast concrete goods
1.13.1.1 Beams
1.13.1.1.1 Dimensioned description or dimensioned diagram. 0 nr 0.00
1.13.1.1.2 Dimensioned description stating number of pieces. 0m 0.00
1.13.1.1.3 Dimentioned description stating thickness 0 m2 0.00
1.13.1.2 Columns
1.13.1.3 Portal frames
1.13.1.4 Staircases
1.13.1.5 [Use rogue for any other (number) item]
1.13.1.6 [Use rogue for any other (linear) item]
Page 38
Qty Unit Rate N K
PRECAST CONCRETE continued ...

Precast concrete goods continued ...
1.13.1.7 [Use rogue for any other (square area) item]
1.13.1.7.1 Dimensioned description stating thickness. 0 m2 0.00
Precast concrete sills, lintels, copings and other
1.13.2 units
1.13.2.1 Sills
1.13.2.2 Lintels
... x ... x... prestressed precast concrete lintels

manufactured by XXXX to BS 5977, Part 2, installed
in accordance with the manufacturers
1.13.2.2.1 recommendations 0 nr 0.00
1.13.2.3 Padstones
1.13.2.4 Mullions
1.13.2.5 Transoms
1.13.2.6 Jambs
1.13.2.7 Copings
1.13.2.8 Cornices
1.13.2.9 Pier caps
Page 39
Qty Unit Rate N K

units continued ...
1.13.2.10 Chimney caps
1.13.2.11 Finials
1.13.2.12 Corbels
1.13.2.13 Small panels
1.13.2.1.13.2 Dimensioned description stating number of pieces. 0m 0.00
1.13.2.14 Steps
1.13.2.15 Landings
1.13.2.16 Staircases
1.13.2.17 Staircase strings
1.13.2.18 Handrails
1.13.2.19 Cappings
1.13.2.20 Balusters
Page 40
Qty Unit Rate N K

units continued ...
1.13.2.21 Balustrades
1.13.2.22 Newels
1.13.2.23 Templates
1.13.3 Precast Panel Cladding
1.13.3.1 Wall panels
1.13.4 Precast concrete slabs
1.13.4.1 Concrete Slabs
1.13.5 Precast walls and partitions
1.13.5.1 Wall panels
1.13.5.2 Partitions
1.13.6 Precast concrete decking
1.13.6.1 Floor descking
1.13.6.2 Roof decking
1.13.7 Rooflighs and pavement lights
1.13.7.2 Rooflights
1.13.7.2.1 [Dimensioned description] [... nr] 0 m2 0.00
1.13.7.3 Pavement lights
1.13.7.4 Vertical panel lights
Page 41
Qty Unit Rate N K

1.13.8 Precast composite concrete work
1.13.8.1 Define as required
1.13.8.1.1 [Dimensions][...nr] 0 nr 0.00
1.13.9 Designed Joint, Holding Down and Straps
1.13.9.5 Designed joints
Dimensioned description or proprietary reference
1.13.9.6.1 number. 0 Nr 0.00
Page 42
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 43
1.14 MASONRY
Qty Unit Rate N K
1.14 MASONRY
1.14 Drawings
Plans of each floor level; principal sections

showing floor to floor height; external elevations
1.14.0.1.5.1 and any other major masonry work. item 0.00
Bonding to other work; raking or curved work so

described; radius of curved work and type of
1.14.0.2.5.1 finish/facing to each side. item 0.00

1.14.0.3.5 measurment.
Major horizontal and vertical dimensions; types of

materials used to construct the walls and other
1.14.0.3.5.1 structures and position of main frame members. item 0.00
1.14.1 Brick/Block walling
1.14.1.1 Brickwork (Select spec)
1.14.1.1.1 Walls
1.14.1.1.1.1 ...... mm thick brickwork 0 m2 0.00
1.14.1.1.2 Diaphragm walls
Diaphragm walls; . mm overall thickness, ribs ..
1.14.1.1.2.1 spaced at . centers 0 m2 0.00
Diaphragm walls; . mm overall thickness, ribs ..
1.14.1.1.2.2 spaced at . centers 0 m2 0.00
1.14.1.1.3 Vaulting
1.14.1.1.3.1 Vaulting; thickness and type stated 0 m2 0.00
Isolated piers; isolated casings; chimney stacks;
1.14.1.1.4 columns
1.14.1.1.4.1 ...... thick; vertical 0m 0.00
1.14.1.1.5 Attached projections
1.14.1.1.5.1 Attached projection [. x . ] 0m 0.00
1.14.1.1.6 Arches
1.14.1.1.6.1 Arches Flat .. Nr, . height on face, . wide soffit 0m 0.00
1.14.1.1.7 Bands
1.14.1.1.7.1 Flush 0m 0.00
1.14.1.1.7.2 Sunk depth of set back stated 0m 0.00
Page 44
1.14 MASONRY
Qty Unit Rate N K
MASONRY continued ...

Brick/Block walling continued ...
Brickwork (Select spec) continued ...
Bands continued ...
1.14.1.1.7.3 Projecting depth of set forward stated 0m 0.00
1.14.1.1.7.4 Basket pattern bands . wide 0m 0.00
1.14.1.2 Blockwork (Select spec)
1.14.1.2.1 Walls
1.14.1.2.1.1 100 mm thick blockwork 0 m2 0.00
1.14.1.2.1.2 150 mm thick blockwork 0 m2 0.00
1.14.1.2.1.3 ...mm thick blockwork 0 m2 0.00
1.14.1.2.1.4 ...mm thick block skins of hollow walls 0 m2 0.00
1.14.1.2.8 Flues
Flues [Dimensioned description, method of
1.14.1.2.8.1 forming] 0m 0.00
1.14.1.2.9 Flue linings
1.14.1.2.9.1 Flue linings [. x .] 0m 0.00
1.14.1.2.9.2 Flue linings . diameter 0m 0.00
1.14.1.2.10 Filling around flues
Filling around flues [Dimensioned description,
1.14.1.2.10.1 method of forming] 0m 0.00
Extra over walls for perimeters and abutments,
1.14.1.2.11 details stated
1.14.1.2.11.1 Forming eaves . 0m 0.00
Extra over walls for opening perimeters, details
1.14.1.2.12 stated
1.14.1.2.12.1 Sills 0m 0.00
1.14.1.2.13 Special purpose blocks or stones
1.14.1.2.13.1 Generally 0 nr 0.00
1.14.1.2.14 Forming cavities
1.14.1.2.1.14.1 Width and method of forming 0 m2 0.00
1.14.1.2.15 Cavity insulation
1.14.1.2.15.1 Type and thickness 0 m2 0.00
1.14.1.2.16 Damp proof courses <= 300mm wide
1.14.1.2.16.1 ... mm thick, in ... layer, bedded ... 0m 0.00
1.14.1.2.17 Damp proof courses > 300mm wide
1.14.1.2.17.1 ... mm thick, in ... layer, bedded ... 0 m2 0.00
1.14.1.2.18 Preformed cavity trays
1.14.1.2.18.1 Cavity trays 0m 0.00
Page 45
1.14 MASONRY
Qty Unit Rate N K
MASONRY continued ...

Brick/Block walling continued ...
Blockwork (Select spec) continued ...
1.14.1.2.19 Joint reinforcement
1.14.1.2.19.1 width stated 0m 0.00
1.14.1.2.20 Fillets
1.14.1.2.20.1 Width and thickness stated 0m 0.00
1.14.1.2.21 Pointing
1.14.1.2.21.1 width and depth of joint to be pointed 0m 0.00
1.14.1.2.22 Jointing
1.14.1.2.23 Wedging and pinning
1.14.1.2.24 Creasing
1.14.1.2.24.1 width stated 0m 0.00
1.14.1.2.24.2 Number of courses 0m 0.00
1.14.1.2.25 Proprietarry and individual spot items
1.14.1.2.1.25.1 [Dimensions] 0 nr 0.00
1.14.2 Glass block walling
1.14.2.0 Glass blockwork (Select spec)
1.14.2.0.1 Walls
1.14.2.0.1.1 ...mm thick blockwork 0 m2 0.00
1.14.3 Natural stone rubble walling and dressings
1.14.3.0 Natural Stone (Select Spec)
1.14.3.0.1 Walls
1.14.3.0.1.1 ...mm thick 0 m2 0.00
1.14.3.0.1.2 ...mm thick skins of hollow walls 0 m2 0.00
1.14.4 Natuaral stone ashlar walling and dressing
1.14.4.0 Natural Stone (Select Spec)
1.14.4.0.1 Walls
1.14.4.0.1.1 ...mm thick 0 m2 0.00
1.14.5 Artificial stone walling and dressings
1.14.5.1 Cast Stone (Select spec)
1.14.5.1.1 Walls
1.14.5.1.1.1 ...mm thick 0 m2 0.00
Page 46
1.14 MASONRY
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 47
1.15 STRUCTURAL METALWORK
Qty Unit Rate N K

1.15 Section Preambles / Preliminaries / Notes
1.15 Drawings
All general arrangement drawings, plans,
1.15.0.1.5.1 sections and elevations; item 0.00
Specification describing fabrication, welding,

testing, erection and everything else necessary to
1.15.0.2.5.1 complete the installation. item 0.00

Position of the work in relation to the proposed

structure and any existing structure that new
work is being connected to; The types and size of
all structural members and their position to each
other; Details of connectionor the reactions,
1.15.0.3.5.1 moments and axial loads at connection points. item 0.00
1.15.1 Structural Steelwork
1.15.1.1 Framed members, framing and fabrication
1.15.1.1.1 Lengths not exceeding 1.00m; Weight <= 25kg/m
1.15.1.1.1.1 Columns etc 0.00 t 0.00
1.15.1.1.2 Lengths not exceeding 1.00m; Weight 25-50kg/m
1.15.1.1.2.1 Columns, etc 0.00 t 0.00
1.15.1.1.3 Lengths not exceeding 1.00m; Weight 50-100kg/m
1.15.1.1.3.1 Columns. 0.00 t 0.00
Lengths not exceeding 1.00m; Weight over
1.15.1.1.4 100kg/m in increments of 50kg.
1.15.1.1.4.1 Columns. 0.00 t 0.00
Lengths over 1.00 but not exceeding 9.00m; Weight
1.15.1.1.5 <= 25kg/m
1.15.1.1.5.1 Columns. 0.00 t 0.00
1.15.1.1.6 25-50kg/m
1.15.1.1.6.1 Columns. 0.00 t 0.00
1.15.1.1.7 50-100kg/m
1.15.1.1.7.1 Columns. 0.00 t 0.00
Page 48
Qty Unit Rate N K
STRUCTURAL METALWORK continued ...

Structural Steelwork continued ...
Framed members, framing and continued ...
1.15.1.1.8 over 100kg/m in increments of
1.15.1.1.8.1 Columns. 0.00 t 0.00
1.15.1.1.9 Lengths exceeding 9.00m; Weight <= 25kg/m
1.15.1.1.9.1 Columns. 0.00 t 0.00
1.15.1.1.10 Lengths exceeding 9.00m; Weight 25-50kg/m
1.15.1.1.10.1 Columns. 0.00 t 0.00
1.15.1.1.11 Lengths exceeding 9.00m; Weight 50-100kg/m
1.15.1.1.11.1 Columns. 0.00 t 0.00
Lengths exceeding 9.00m; Weight over 100kg/m in
1.15.1.1.12 increments of 50kg.
1.15.1.1.12.1 Columns. 0.00 t 0.00
1.15.1.2 Framed members, permanent erection on site
1.15.1.2.1 Lengths not exceeding 1.00m; Weight <= 25kg/m
1.15.1.2.1.1 Columns. 0.00 t 0.00
1.15.1.3 Isolated structural members, fabrication
Plain member: use stated; Dimensioned
1.15.1.3.1 description and weight per Lin. m 0.00 t 0.00
Isolated structural members, permanent erection on
1.15.1.4 site
1.15.1.4.1 Built-up member, use stated. 0 nr 0.00
1.15.1.5 Allowance for fittings
1.15.1.5.1 Calculated weight 0.00 t 0.00
1.15.1.5.2 Precentage allowance; percentage sated 0.00 t 0.00
1.15.1.6 Cold rolled purlins, cladding rails and the like
1.15.1.6.1 Type and method of fixing stated. 0m 0.00
1.15.1.6.2 Size or proprietary reference stated 0m 0.00
1.15.1.7 Extra over for
1.15.1.7.1 Forming cranks 0 Nr 0.00
1.15.1.8 Profiled metal decking, type and/or profile stated
1.15.1.8.1 Height not exceeding 5.00m 0 m2 0.00
1.15.1.8.2 Height exceeding 5.00m but not exceeding 10.00m 0 m2 0.00
1.15.1.8.3 And so on in 5.00m increments 0 m2 0.00
1.15.1.9 Extra over for
Edge trims size, girth, profile or proprietary
1.15.1.9.1 reference stated 0m 0.00
Page 49
Qty Unit Rate N K
STRUCTURAL METALWORK continued ...

Structural Steelwork continued ...
1.15.1.10 Holding down bolts or assemblies
1.15.1.10.1 Type and diameter stated. 0 nr 0.00
1.15.1.11 Special bolts
1.15.1.11.1 Type and diameter stated. 0 nr 0.00
Connections to existing steel and other members or
1.15.1.12 structures
1.15.1.12.1 Details stated 0 nr 0.00
1.15.1.13 Trial erection
1.15.1.13.1 Details and location stated. 0.00 t 0.00
1.15.1.14 Filling hollow sections
1.15.1.14.1 Water. item 0.00
1.15.1.14.2 Concrete. item 0.00
1.15.1.14.3 Other material type stated item 0.00
1.15.1.15 Surface treatments
1.15.1.1.15.1 Galvanising. 0 m2 0.00
1.15.1.15.2 Sprayed coating. 0 m2 0.00
1.15.1.15.3 Painting. 0 m2 0.00
1.15.1.15.4 Other treatment: type stated. 0 m2 0.00
1.15.1.16 Isolated protective coatings
1.15.1.16.1 Approximate size or area stated 0 Nr 0.00
1.15.1.17 Testing
1.15.1.17.1 Load tests item 0.00
1.15.1.17.2 Fire protection tests item 0.00
1.15.1.17.3 Other tests item 0.00
Page 50
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 51
1.16 CARPENTRY
Qty Unit Rate N K
1.16 CARPENTRY
1.16 Drawings

sections and elevations; Drawings specific to the
1.16.0.1.5.1 work. item 0.00
1.16.0.2.5 Mandatory information; To be provided
Grade of Timber; spacing of battens and grounds;
1.16.0.2.5.1 Nature of base item 0.00

Layout and spacing of timbers; Types of

materials used and Position of Timber in relation
1.16.0.3.5.1 to adjacent structures. item 0.00
1.16.1 Timber framing
1.16.1.1 Primary or structural timbers
1.16.1.1.1 Nominal size stated. 0m 0.00
1.16.1.2 Engineered or prefabricated members/items
1.16.1.2.1 Finished Dimensioned description. 0 nr 0.00
1.16.2 Timber first fixings
1.16.2.3 Backing and other first fix timbers
1.16.2.3.1 Nominal Dimensioned description of each member. 0m 0.00
1.16.2.3.2 Nominal Dimensioned description of each member. 0 m2 0.00
Timber, metal and plastic boarding, sheeting,
1.16.3 decking, casings & linings
Boarding, flooring, sheeting, decking, casings,
1.16.3.4 linings, sarking, fascias, barge boards and the like
Not exceeding 600mm wide; finished width and
1.16.3.4.1 thickness stated. 0m 0.00
1.16.3.4.2 Over 600mm wide; finished thickness stated. 0 m2 0.00
1.16.3.5 Ornamental ends of timber members
1.16.3.5.1 Size and detail stated. 0 nr 0.00
1.16.4 Metal and plastic accessories
1.16.4.6 Metal fixings, fastenings and fittings
Page 52
1.16 CARPENTRY
Qty Unit Rate N K
CARPENTRY continued ...

Metal and plastic accessories continued ...
Metal fixings, fastenings and fittings continued ...
Proprietary reference or catalogue number where
1.16.4.6.2 applicable. 0 nr 0.00
Page 53
1.16 CARPENTRY
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 54
1.17 SHEET ROOF COVERINGS
Qty Unit Rate N K

1.17 Drawings
Drawings; That must accompany this of
1.17.1.5 measurement
Plans of each roof; principal sections of roof;
1.17.1.5.1 external elevations item 0.00
1.17.2.5 Mandatory information; to be provided
Thickness, gauge, weight and temper; method of

fixing; details and position of laps, drips, welts,
beads, rolls, joints, upstands and downstands;
Bonding to other work; Radius of curved work;
Type(s) and spacing of joints; Type(s) and
1.17.2.5.1 spacing of seams and special finishes. item 0.00

measurement.e following references are to the
minimum level of information that should be shown
1.17.3.5 on drawings as part of the Bills
Majot horizontal and vertical dimensions; Types of

materials used to construct the roof and its
structure; Position of main structural frame
members; Height of work above ground level stating
whether working platform level or finished and All
1.17.4.1 labours and dressings item 0.00
Bituminous felts, Plastic sheets, Sheet metals,

Rigid boards with factory applied sheet covering,
1.17.1 Any other type of sheet roof covering
1.17.1.1.1 Horizontal. 0 m2 0.00
1.17.1.1.2 Sloping: ... deg pitch 0 m2 0.00
1.17.1.1.3 Vertical. 0 m2 0.00
1.17.1.1.4 Curved: radii stated. 0 m2 0.00
1.17.1.2 Coverings <= 500mm wide
1.17.1.2.1 Horizontal. 0m 0.00
1.17.1.2.2 Sloping: ... deg pitch 0m 0.00
1.17.1.2.3 Vertical. 0m 0.00
1.17.1.2.4 Curved: ... radius 0m 0.00
1.17.1.2.5 Curved: ... radius 0m 0.00
Page 55
Qty Unit Rate N K
SHEET ROOF COVERINGS continued ...
Bituminous felts, Plastic sheets, Sheet metals,

Rigid boards with factory applied sheet covering,
Any other type of sheet roof covering continued ...
1.17.1.3 Extra over for forming
1.17.1.3.1 Drips ... high 0m 0.00
1.17.1.3.2 Welts 0m 0.00
1.17.1.3.3 Rolls ... x ... 0m 0.00
1.17.1.3.4 Seams ... long 0m 0.00
1.17.1.3.5 Laps ... long 0m 0.00
Boundary work, location and method of forming
1.17.1.4 described
1.17.1.4.1 ... net girth 0m 0.00
1.17.1.4.2 Average ... net girth, .. number of lengths 0m 0.00
1.17.1.5 Flashings
1.17.1.5.1 ... net girth 0m 0.00
1.17.1.6 Gutters
1.17.1.6.1 ... net girth 0m 0.00
1.17.1.7 Valleys
1.17.1.7.1 ... net girth 0m 0.00
1.17.1.8 Spot items
1.17.1.8.1 Dimensioned diagram or dimensioned description. 0 nr 0.00
1.17.1.9 Fittings
Page 56
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 57
1.18 TILE AND SLATE ROOF AND WALL COVERINGS
Qty Unit Rate N K
1.18 TILE AND SLATE ROOF AND WALL COVERINGS

1.18 Drawings
Plans of each roof; Principal sections of roof;
1.18.0.1.5.1 External elevations item 0.00
Method of fixing; minimum laps; spacing of

battens and counter battens; composition and
mix of mortar; type of pointing; Bonding of other
1.18.0.2.5.1 work; Radius of curved work item 0.00

Major horizontal and vertical dimensions; Types

of materials used to construct the roof and its
structures; position of main structural frame
1.18.0.3.5.1 members. item 0.00
1.18.1 Plain tiling
1.18.1.1 Roof coverings
1.18.1.1.1 pitch stated 0 m2 0.00
1.18.1.2 Wall coverings
1.18.1.2.1 Vertical. 0 m2 0.00
Boundary work; location and method of forming
1.18.1.3 described
1.18.1.3.1 Dimensioned description stating net girth. 0m 0.00
1.18.1.4 Fittings
1.18.2 Interlocking tiling
1.18.2.1 Roof coverings
1.18.2.1.1 .. deg pitch 0 m2 0.00
1.18.2.2 Wall coverings
1.18.2.2.1 Vertical. 0 m2 0.00
Boundary work; location and method of forming
1.18.2.3 described
1.18.2.3.1 Dimensioned description stating net girth. 0m 0.00
1.18.2.4 Fittings
To Summary N 0.00
Page 58
1.19 WATERPROOFING
Qty Unit Rate N K
1.19 WATERPROOFING
1.19 Drawings
Plans of each level where work is to be carried
1.19.0.1.5.1 out; Section showing extent of work item 0.00
Restriction on sitting of materials and plant;

maximum laps; Thickness and number of coats;
1.19.0.2.5.1 surface finishes or treatment. item 0.00

1.19.0.3.5.1 Extent of work; Height of work above ground level. item 0.00
1.19.1 Mastic asphalt roofing
1.19.1.1.1 Horizontal. 0 m2 0.00
1.19.1.2 Coverings <= 500mm wide
1.19.1.2.1 Horizontal. 0m 0.00
1.19.1.3 Skirtings
1.19.1.3.1 ... net girth on face. 0m 0.00
1.19.1.4 Fascias
1.19.1.5 Aprons
1.19.1.6 Gutters
1.19.1.7 Channels
1.19.1.8 Valleys
1.19.1.9 Kerbs
1.19.1.10 Spot items
Page 59
1.19 WATERPROOFING
Qty Unit Rate N K
WATERPROOFING continued ...

Mastic asphalt roofing continued ...
1.19.1.11 Fittings
1.19.1.12 Edge trim
1.19.1.12.1 Dimensioned diagram or dimensioned description. 0m 0.00
Page 60
1.19 WATERPROOFING
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 61
1.20 PROPRIETARY LININGS & PARTITIONS
Qty Unit Rate N K

1.20 Drawings
1.20.0.1.5 Drawings; that must accompany this section.
Plans, sections and elevations to show scope
1.20.0.1.5.1 and location of work. item 0.00
Method of fixing framing and linings; Layout and

treatment of joints; method of jointing; surface
preparation; finish; Radii of curved work; Nature of
base; Locationof wall or ceiling mounted fittings
requiring additional support of framing; Sealant to
1.20.0.2.5.1 joints and perimeters. item 0.00

Strcutural floor to ceiling heights; The services

located within the ceiling, partition or lining where
1.20.0.3.5.1 the work includes complex integral services. item 0.00
1.21.1 Metal framed systems to walls and ceilings
Drylining and partitioning systems to walls and
1.21.1.0 ceilings
1.21.1.0.1 Proprietary metal framed system to form walls
1.21.1.0.1.1 Finished thickness stated 0 m2 0.00
Height or average height stated in 1.00m
1.21.1.0.1.2 increments. 0 m2 0.00
1.21.1.0.1.3 Total length stated measured along centre line. 0 m2 0.00
1.21.1.0.2 Proprietary metal framed system to form ceilings
1.21.1.0.2.1 Over 300mm wide on face 0 m2 0.00
1.21.1.0.2.2 Not exceeding 300mm wide on face 0m 0.00
1.21.1.0.3 Extra over for different
1.21.1.0.3.1 Lining: details stated 0 m2 0.00
1.21.1.0.3.2 Finish: details stated 0 m2 0.00
1.21.1.0.4 Extra over for forming openings.
1.21.1.0.4.1 Not exceeding 2.50m2. 0 nr 0.00
1.21.1.0.4.2 2.50-5.00m2. 0 nr 0.00
Exceeding 5.00m2 in further increments of
1.21.1.0.4.3 2.50m2. 0 nr 0.00
Page 62
Qty Unit Rate N K
PROPRIETARY LININGS & PARTITIONS continued ...

Metal framed systems to walls and continued ...
ceilings continued ...
1.21.1.0.5 Extra over for non-standard perimeter details.
1.21.1.0.5.1 Dimensioned description. 0m 0.00
1.21.1.0.6 Extra over for angles.
1.21.1.0.7 Extra over for junctions.
1.21.1.0.8 Extra over for access panels.
1.21.1.0.8.1 Dimensioned description or proprietory reference 0 nr 0.00
1.21.1.0.9 Fair ends to partitions
1.21.1.0.9.1 Thickness of partition stated 0m 0.00
1.21.1.0.10 Proprietary linings to walls
1.21.1.0.10.1 Over 300mm wide on face. 0 m2 0.00
1.21.1.0.10.2 Not exceeding 300mm wide on face. 0 m2 0.00
1.21.1.0.11 Proprietary linings to ceilings.
1.21.1.0.11.1 Over 300mm wide on face. 0 m2 0.00
1.21.1.0.11.2 Not exceeding 300mm wide on face. 0 m2 0.00
1.21.1.0.12 Proprietary linings to columns.
1.21.1.0.12.1 Girth n/e 300mm, ... Nr of faces 0m 0.00
1.21.1.0.12.2 Girth 300mm - 600mm, ... Nr of faces 0m 0.00
1.21.1.0.12.3 Girth 600mm - 900mm, ... Nr of faces 0m 0.00
1.21.1.0.12.4 Thereafter in 300mm stages, ...Nr of faces 0m 0.00
1.21.1.0.13 Proprietary linings to beams.
1.21.1.0.13.1 Girth n/e 300mm, Nr of faces stated 0m 0.00
1.21.1.0.13.2 Girth 300mm - 600mm, ...Nr of faces 0m 0.00
1.21.1.0.14 Proprietary linings to bulkheads.
1.21.1.0.14.1 Girth n/e 300mm, Nr of faces stated 0m 0.00
1.21.1.0.15 Extra over for forming openings.
1.21.1.0.15.1 Not exceeding 2.50m2. 0 nr 0.00
1.21.1.0.15.2 2.50-5.00m2. 0 nr 0.00
Page 63
Qty Unit Rate N K
PROPRIETARY LININGS & PARTITIONS continued ...

Metal framed systems to walls and continued ...
ceilings continued ...
Extra over for forming openings. continued ...
Exceeding 5.00m2 in further increments of
1.21.1.0.15.3 2.50m2 0 nr 0.00
1.21.1.0.17 Extra over for angles.
1.21.1.0.18 Extra over for junctions.
1.21.1.0.18.1 Dimensioned description. 0 nr 0.00
1.21.1.0.19 Extra over for access panels.
1.21.1.0.19.1 Dimensioned description or proprietory reference 0 nr 0.00
1.21.1.0.20 Beads, function stated
1.21.1.0.21.1 Dimensioned description or proprietory reference 0m 0.00
Page 64
20 PROPRIETARY LININGS & PARTITIONS
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 65
1.21 CLADDING AND COVERING
Qty Unit Rate N K

1.21 Drawings
Plans, section and elevations sufficient to show

scope and locationof the works; component
1.21.0.1.5.1 drawings item 0.00
Type, finish and spacings of structural members;

Nature , thickness and spacing of structural
1.21.0.2.5.1 supports. item 0.00

drawings tha accompany this section of
1.21.0.3.5.1 Construction of each installations. item 0.00
Patent glazing, curtain walling, rainscreen

cladding, glazed vaulting and structural glass
1.21.1 assemblies
1.21.1.1 Walls
1.21.1.1.1 Not exceeding 600 wide. 0m 0.00
1.21.1.1.2 Exceeding 600 wide. 0 m2 0.00
Isolated area not exceeding 1m2, irrespective of
1.21.1.1.3 width. 0 nr 0.00
1.21.1.2 Floors
1.21.1.2.2 Exceeding 600 wide. 0 m2 0.00
1.21.1.2.3 width. 0 nr 0.00
1.21.1.3 Ceilings
1.21.1.3.2 Exceeding 600 wide. 0 m2 0.00
1.21.1.3.3 width. 0 nr 0.00
1.21.1.4 Roofs
1.21.1.4.2 Exceeding 600 wide. 0 m2 0.00
1.21.1.4.3 width. 0 nr 0.00
Page 66
Qty Unit Rate N K
CLADDING AND COVERING continued ...
Patent glazing, curtain walling, rainscreen

cladding, glazed vaulting and structural glass
assemblies continued ...
1.21.1.5 Sides and tops of dormers
1.21.1.5.2 Exceeding 600 wide. 0 m2 0.00
1.21.1.5.3 Exceeding 600 wide. 0 m2 0.00
1.21.1.5.4 width. 0 nr 0.00
1.21.1.6 Sides and soffits of beams
1.21.1.6.2 Exceeding 600 wide. 0 m2 0.00
1.21.1.6.3 width. 0 nr 0.00
1.21.1.7 Sides of columns
1.21.1.7.2 Exceeding 600 wide. 0 m2 0.00
1.21.1.7.3 width. 0 nr 0.00
1.21.1.8 Items extra over the work in which they occur
1.21.1.8.2 Proprietary reference. 0 nr 0.00
1.21.1.9 Boundary work
1.21.1.9.2 Proprietary reference. 0m 0.00
1.21.1.10 Opening perimeters
1.21.1.11 Angles
1.21.1.12 Closers
Page 67
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 68
1.22 GENERAL JOINERY
Qty Unit Rate N K

1.22 Drawings
1.22.0.1.5.1 General arrangement plans item 0.00
Kind and quality of materials; finish of timber if nit

wrot; preservation treatment; surface treatment as
part of the production process; Selection and
protection for subsequenttreatment or clear finish;
matching grain or colour; limits on planning
margins; method of jointing and construction
where not at the discretion of the contractor; form
of construction and jointing where not at the
discretion of the contractor; method of fixing
1.22.0.2.5.1 where not at the discretion of the contractor. item 0.00

1.22.0.3.5.1 Scope and location of work item 0.00
Unframed isolated trims, skirtings and sundry
1.22.1 items
1.22.1.1 Skirtings, picture rails,
Dimensioned overall cross section stated.; Number
1.22.1.1.1 and type of labours described. 0m 0.00
1.22.1.2 Architraves and the like
1.22.1.3 Cover fillets, stops, trims, beads, nosings and the like
1.22.1.4 Isolated shelves and worktops
1.22.1.5 Window boards
Page 69
Qty Unit Rate N K
GENERAL JOINERY continued ...

Unframed isolated trims, skirtings and sundry
items continued ...
1.22.1.6 Isolated handrails and grab rails
1.22.1.7 Duct covers
1.22.1.7.1 Thickness and width or girth stated. 0m 0.00
Thickness and width or girth not exceeding 300mm
1.22.1.7.2 stated 0m 0.00
Thickness and width or girth over 300mm but not
1.22.1.7.3 exceeding 600mm stated 0m 0.00
Thickness and width or girth thereafter in 300mm
1.22.1.7.4 stages 0m 0.00
1.22.1.8 Pipe casings
1.22.1.8.2 stated 0m 0.00
1.22.1.8.4 stages 0m 0.00
1.22.1.9 Shelves
1.22.1.9.2 stated 0m 0.00
1.22.1.9.4 stages 0m 0.00
1.22.1.10 Pinboards, backboards, plinth blocks and the like
Dimensioned description.; Method of fixing.; Nature
1.22.1.10.1 of base. 0 nr 0.00
Floor, wall and ceiling boarding, sheeting,
1.22.2 panelling, linings and casings
1.22.2.11 Boarding, sheeting, panelling over 600mm wide
1.22.2.11.1 Thickness. 0 m2 0.00
Boarding, sheeting, panelling not exceeding 600mm
1.22.2.12 wide
1.22.2.12.1 Width and thickness. 0m 0.00
Page 70
Qty Unit Rate N K
GENERAL JOINERY continued ...

1.22.3 Proprietary partitions, panels and cubicles
1.22.3.13 Partitions
Height and thickness stated. Proprietary name or
1.22.3.13.1 reference stated 0m 0.00
1.22.3.14 Items extra over the partition they occur in
1.22.3.14.1 Openings: size stated. 0 nr 0.00
1.22.3.14.2 Trims: dimensioned description. 0m 0.00
1.22.3.15 Duct panels, Sanitary ware back panels and the like
1.22.3.15.1 Overall size stated; Thickness stated 0 Nr 0.00
1.22.3.16 Cubicle partition sets
Items extra over the partition they occur in Infill
1.22.3.17 panels
1.22.3.17.1 Trims: dimensioned description. 0m 0.00
1.22.4 Infill panels
1.22.4.18 Infill panels and sheets, number stated
1.22.4.18.1 Thickness stated. 0 m2 0.00
1.22.5 Sealant joints
1.22.5.19 Joints: contact surfaces stated
1.22.5.19.1 Type and size of components stated. 0m 0.00
1.22.5.20 Pointing: contact surfaces stated
1.22.5.20.1 One side. 0m 0.00
1.22.5.20.2 Both sides. 0m 0.00
1.22.5.21 Raking out existing joints
1.22.5.21.1 Width , depth and type of material stated. 0m 0.00
1.22.6 Ironmongery
1.22.6.22 Type of item, unit or set stated
1.22.6.22.1 Method of fixing.; Nature of base. 0 nr 0.00
Page 71
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 72
1.23 WINDOWS, SCREENS & LIGHTS
Qty Unit Rate N K

1.23 Drawings
General arrangement plans; Door and window

schedule; Glazing schedule; Ironmingery
1.23.0.1.5.1 schedule item 0.00
Preservation; Surface; Selection; matching grain;

Limits on planning margins; method of jointing
and construction where not at the discretion of
the contractor; Form of construction and jointing
where not at the discretion of the contractor;
method of fixing where not at the discretion of the
1.23.0.2.5.1 contractor and background where vulnerable. item 0.00

drawings that accompany this sectio of
Shape and size of units; methods of fixing units
1.23.0.3.5.1 and Glazing item 0.00
1.23.1 Windows
1.23.1.1 Windows and window frames
1.23.1.1.1 Dimensioned description or diagram. 0 nr 0.00
1.23.1.2 Window shutters
1.23.1.3 Sun shields
1.23.2 Rooflights
1.23.2.4 Rooflights, skylights and lanternlights
1.23.3 Screens
1.23.3.5 Screens, borrowed lights and
1.23.4 Shop fronts
1.23.4.6 Shop fronts
Page 73
Qty Unit Rate N K
WINDOWS, SCREENS & LIGHTS continued ...

1.23.5 Louvres, shutters, canopies and blinds
1.23.5.7 Louvres and frames
1.23.6 Associated glass & glazing
1.23.6.8 Glass, type stated
Thickness of glass or overall thickness of sealed
1.23.6.8.1 unit stated. 0 nr 0.00
1.23.6.9 Louvre blades
1.23.6.9.1 unit stated. 0 nr 0.00
1.23.7 Associated ironmongery
1.23.7.10.1 Method of fixing, nature of base 0 nr 0.00
Page 74
23 WINDOWS, SCREENS & LIGHTS
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 75
1.24 DOORS, SHUTTERS AND HATCHES
Qty Unit Rate N K

1.24 Drawings
Floor plans; door schedule; ironmongery
1.24.0.1.5.1 schedule. item 0.00
Kind and quality of materials and, if timber,

describing if wrot or sawn; preservation
treatments; surface treatment applied as part of
the poduction process; selection and protection
for subsequent treatment or clear finish; matching
grain or colour; limit of planning margins; method
of jointing and constructionwhere not at the
dixcretion of the contractor; form of construction
and jointing where not at the discretion of the
contractor; method of fixing where not at the
discretion of the contractor and background
1.24.0.2.5.1 where vulnerable. item 0.00

1.24.0.3.5.1 Location of all doors and door reference number. item 0.00
1.24.1 Doors & frames
1.24.1.1 Door sets
1.24.1.1.1 Detailed description of set. 0 nr 0.00
1.24.1.1.2 Structural opening size. 0 nr 0.00
1.24.1.2 Doors
1.24.1.4 Collapsible gates
1.24.1.4 Strong room doors
1.24.1.7 Grills
1.24.1.9 Door frames
1.24.1.9.1 Dimensioned overall cross section description. 0m 0.00
1.24.1.10 Door linings
Page 76
Qty Unit Rate N K
DOORS, SHUTTERS AND HATCHES continued ...

Doors & frames continued ...
1.24.1.11 Door stops
1.24.1.12 Associated fire stops
1.24.2 Shutters & Hatches
1.24.2.3 Roller shutters
1.24.2.6 Hatches
1.24.2.12 Associated fire stops
1.24.2.13 Associated smoke stops
1.24.3 Sliding or folding doors & partitions
1.24.3.5 Sliding folding partitions
1.24.4 Grilles
1.24.4.8 Grilles
1.24.5 Associated glass & glazing
1.24.5.14 Glass, type stated
1.24.5.14.1 unit stated. 0 nr 0.00
1.24.5.15 Louvre blades
1.24.5.15.1 unit stated. 0 nr 0.00
1.24.6 Associated ironmongery
1.24.6.16.1 Method of fixing. 0 nr 0.00
Page 77
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 78
1.25 STAIRS, WALKWAYS AND BALUSTRADES
Qty Unit Rate N K

1.25 Drawings
Plans and section showing location and scope of
1.25.0.1.5.1 each unit item 0.00
Kind and quality of materials and, if timber,

describing if wrot or sawn; preservation
treatments; surface treatment applied as part of
the poduction process; selection and protection
for subsequent treatment or clear finish; matching
grain or colour; limit of planning margins; method
of jointing and constructionwhere not at the
dixcretion of the contractor; form of construction
and jointing where not at the discretion of the
contractor; method of fixing where not at the
discretion of the contractor and background
1.25.0.2.5.1 where vulnerable. item 0.00
1.25.0.3.5 drawings that accompany this section
Principle dimensions of each staircase or unit;
1.25.0.3.5.1 height from structural floor to strucrural floor level item 0.00
1.25.0.3.5.2 Enter details item 0.00
1.25.1 Staircases
1.25.1.1 Staircase: type stated
1.25.1.2 Loft ladders
1.25.1.3 Ladders
1.25.1.4 Extra over for:
1.25.1.4.1 Quarter landing. 0 nr 0.00
1.25.1.4.2 Half landing. 0 nr 0.00
1.25.2 Walkways & Gantries
1.25.2.5 Catwalks
1.25.2.6 Walkways
Page 79
Qty Unit Rate N K
STAIRS, WALKWAYS AND continued ...

1.25.3 Balustrades
1.25.3.7 Balustrades
1.25.3.7.2 Component drawing 0 nr 0.00
1.25.3.8 Handrails
1.25.4 Barriers
1.25.4.9 Barriers
1.25.5 Guardrails
1.25.5.10 Guard rails
1.25.5.11 Balcony units
1.25.5.12.1 Opening portions: size and details stated 0 nr 0.00
Page 80
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 81
1.26 METALWORK
Qty Unit Rate N K
1.26 METALWORK
1.26 Drawings
Plans, section, elevations or details sufficient to

show location, scope and construction of each
1.1.26.1.5.1 item measured. item 0.00
Types and grades of materials; details of

connections; details of wedding test and X-rays
1.1.26.2.5.1 and details of performing tests. item 0.00
1.26.3.5 drawings that accompany this section
Position of work; type and size of structural
1.26.3.5.1 members and their position relative to each other item 0.00
1.1.26.1 Isolated metal members
1.26.1.1 Isolated metal members
Dimensioned description: cross section profile
1.26.1.1.1 stated. 0m 0.00
1.26.2 General metalwork
1.26.2.2 General metalwork members
Dimensioned description: cross section profile
1.26.2.2.1 stated. 0m 0.00
1.26.2.3 Sheet metal
1.26.2.4 Wire mesh
1.26.2.4.1 Mesh size and thickness stated. 0 m2 0.00
1.26.2.5 Composite items
1.26.2.5.2 Drawing reference. 0 nr 0.00
1.26.2.6 Filling hollow sections
1.26.2.6.1 Water. item 0.00
1.26.2.6.2 Concrete. item 0.00
1.26.2.6.3 Other material: type stated. item 0.00
Page 82
26 METALWORK
Qty Unit Rate N K
METALWORK continued ...

General metalwork continued ...
1.26.2.7 Surface treatments
1.26.2.7.1 Galvanising. 0 m2 0.00
1.26.2.8 Isolated protective coatings
1.26.2.8.1 Approximate size or area stated 0 Nr 0.00
Page 83
1.26 METALWORK
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 84
1.27 GLAZING
Qty Unit Rate N K
1.27 GLAZING
1.27 Drawings
1.27.0.1.5.1 Elevations; component drawings item 0.00
Kind, quality and thickness of glass; kind and

quality of glazing materials; Method of glazing
including details of gasket where required and
1.27.0.2.5.1 nature of frame or background. item 0.00
1.27.0.3.5.1 General scope and location of work item 0.00
1.27.1 Glass, type stated
1.27.1.1 Thickness of glass or overall thickness of sealed unit. 0 nr 0.00
1.27.1.2 Pane size. 0 nr 0.00
1.27.2 Sealed glazed units, type of glass stated
1.27.2.2 Pane size. 0 nr 0.00
1.1.27.3 Louvre blades, type of glass stated
1.27.3.2 Pane size. 0 nr 0.00
1.27.4 Extra for:
1.27.4.1 Grinding. 0 nr 0.00
1.27.4.2 Sandblasting. 0 nr 0.00
1.27.4.3 Sandblasting. 0 nr 0.00
1.27.4.4 Acid etching. 0 nr 0.00
1.27.4.5 Embossing. 0 nr 0.00
1.27.4.6 Engraving. 0 nr 0.00
1.27.5 Lead light glazing, type of glass stated
1.27.5.1 Thickness of glass. 0 nr 0.00
1.27.6 Saddle bars
1.27.6.1 Diameter and length stated. 0m 0.00
1.27.7 Mirrors
1.27.7.1 Dimensioned description. 0 nr 0.00
Page 85
1.27 GLAZING
Qty Unit Rate N K
GLAZING continued ...

Removing existing glass and preparing frame or
1.27.8 surround to receive new glass
1.27.8.1 Type of frame or surround. 0 nr 0.00
Page 86
1.27 GLAZING
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 87
1.28 FLOOR, WALL, CEILING & ROOF FINISHINGS
Qty Unit Rate N K

1.28 Drawings
Drawings; that must accomany this section of
Plan of each floor; principal sections through
1.28.0.1.5.1 building; external elevations; finished schedules item 0.00
Kind, quality and size of materials; number of

coatsof insitu work; types of underlay or linings;
bedding or other method of fixing; type of
pointing; laps; layout and width of joints and
bays; patterns; spacing of battens and counter
bettens; composition and mix of mortars; bonding
of other work; radius of curved work; nature of
base; laid in one operation with base; Applied
1.28.0.2.5.1 finishes/sealers/polishes. item 0.00
All floor to floor or ceiling heights; layout of
1.28.0.3.5.1 pattern work; details of moulded work item 0.00
1.28.1 Insitu finishes
Screeds, beds and toppings, thickness and number
1.28.1.1 of coats stated
1.28.1.1.1 <= 600mm wide. 0m 0.00
1.28.1.1.2 > 600mm wide. 0 m2 0.00
Finish to floors, type of finish and overall thickness
1.28.1.2 stated
1.28.1.2.1 <= 600mm wide. 0m 0.00
1.28.1.2.2 > 600mm wide. 0 m2 0.00
Raised access floors, type of finish and thickness of
1.28.1.3 panels stated
1.28.1.3.1 <= 600mm wide. 0m 0.00
1.28.1.3.2 > 600mm wide. 0 m2 0.00
1.28.1.4 Ramps to raised access floors
1.28.1.4.1 Thickness, length and width stated. 0 nr 0.00
1.28.1.5 Fire barriers within void below raised floor
1.28.1.5.1 Thickness stated 0 m2 0.00
1.28.1.5.2 Thickness and height stated 0m 0.00
Page 88
28 FLOOR, WALL, CEILING & ROOF FINISHINGS
Qty Unit Rate N K
FLOOR, WALL, CEILING & ROOF continued ...

Insitu finishes continued ...
Finish to Roofs, type of finish and overall thickness
1.28.1.6 stated
1.28.1.6.1 <= 600mm wide. 0m 0.00
1.28.1.6.2 > 600mm wide. 0 m2 0.00
Finish to Walls, type of finish and overall thickness
1.28.1.7 stated
1.28.1.7.1 <= 600mm wide. 0m 0.00
1.28.1.7.2 > 600mm wide. 0 m2 0.00
Finish to Isolated columns, type of finish and overall
1.28.1.8 thickness stated
1.28.1.8.1 <= 600mm wide. 0m 0.00
1.28.1.8.2 > 600mm wide. 0 m2 0.00
1.28.1.9 Ceilings, type of finish and overall thickness stated
1.28.1.9.1 <= 600mm wide. 0m 0.00
1.28.1.9.2 > 600mm wide. 0 m2 0.00
Finish to Isolated beams, type of finish and overall
1.28.1.10 thickness stated
1.28.1.10.1 <= 600mm wide. 0m 0.00
1.28.1.10.2 > 600mm wide. 0 m2 0.00
1.28.1.11 Finish to Treads
1.28.1.11.1 Net width stated. 0m 0.00
1.28.1.12 Finish to Risers
1.28.1.12.1 Net width stated. 0m 0.00
1.28.1.13 Finish to Strings and aprons
1.28.1.13.1 Net width or girth on face stated. 0m 0.00
1.28.1.14 Skirtings, net height stated
1.28.1.14.1 Net Height stated 0m 0.00
1.28.1.15 Linings to channels
1.28.1.15.1 Net girth on face stated 0m 0.00
1.28.1.16 Kerbs and cappings
1.28.1.16.1 net girth on face stated 0m 0.00
1.28.1.17 Coves
1.28.1.17.1 Girth and shape stated. 0m 0.00
1.28.1.18 Mouldings
Page 89
Qty Unit Rate N K

1.28.1.19 Cornices
1.28.1.20 Architraves
1.28.1.21 Ceiling ribs
1.28.1.22 Bands
1.28.1.23 Special tiles, slabs or blocks
Dimensioned description / Manuafacurers
1.28.1.23.1 Reference 0 nr 0.00
Dimensioned description / Manuafacurers
1.28.1.23.2 Reference 0 m2 0.00
1.28.1.24 Surface dressings, sealers or polishes.
1.28.1.24.1 Type stated 0 m2 0.00
1.28.1.25 Movement joints
1.28.1.26 Cover strips
1.28.1.27 Dividing strips
1.28.1.28 Beads, function stated
1.28.1.29 Nosings
1.28.1.30 Reinforcement, details stated
1.28.1.1.30.1 To walls. 0m 0.00
1.28.1.30.2 To ceilings. 0 m2 0.00
1.28.1.30.3 To floors. 0 m2 0.00
1.28.1.30.4 To roofs. 0 m2 0.00
1.28.1.30.5 To isolated beams. 0 m2 0.00
1.28.1.30.6 To isolated columns. 0 m2 0.00
Page 90
Qty Unit Rate N K

1.28.1.31 Metal mesh lathing, details stated
1.28.1.1.31.1 To walls. 0m 0.00
1.28.1.31.2 To ceilings. 0 m2 0.00
1.28.1.31.3 To ceilings. 0 m2 0.00
1.28.1.31.4 To floors. 0 m2 0.00
1.28.1.31.5 To roofs. 0 m2 0.00
1.28.1.32 Board insulation, thickness stated
1.28.1.1.32.1 To walls. 0m 0.00
1.28.1.32.2 To ceilings. 0 m2 0.00
1.28.1.32.3 To floors. 0 m2 0.00
1.28.1.32.4 To roofs. 0 m2 0.00
1.28.1.33 Quilt insulation, thickness stated
1.28.1.1.33.1 To walls. 0 m2 0.00
1.28.1.33.2 To ceilings. 0 m2 0.00
1.28.1.33.3 To floors. 0 m2 0.00
1.28.1.33.4 To roofs. 0 m2 0.00
1.28.1.34 Isolation membranes, thickness stated
1.28.1.1.34.1 To walls. 0 m2 0.00
1.28.1.34.2 To ceilings. 0 m2 0.00
1.28.1.34.3 To floors. 0 m2 0.00
1.28.1.34.4 To roofs. 0 m2 0.00
1.28.1.35 Accessories
1.28.1.1.35.1 Dimensioned description 0 nr 0.00
1.28.1.36 Precast plaster components
1.28.1.1.36.1 Dimensioned description or proprietary reference. 0m 0.00
Page 91
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 92
1.29 DECORATION
Qty Unit Rate N K
1.29 DECORATION
1.29 Drawings
Drawings; tha must accompany this section of
Plans and elevation drawings showing scope and

location of the work; painting /decoration
1.29.0.1.5.1 schedule(s) item 0.00
Kind and quality of materials; Nature of base;

description of surface if not smooth; preparatory
work to base; type and number of priming or
sealing joints; type and number of undercoats;
type and number of finishing coats; method of
application; type of treatment applied between
coats; pattern of decorative papers; method of
1.29.0.2.5.1 fixing jointing papers or fabrics. item 0.00
1.29.0.3.5.1 Ceilings over 3.5m above finished floor level item 0.00
1.29.1 Painting & clear finishes
1.29.1.1 Painting to general surfaces
1.29.1.1.1 <= 300mm girth. 0m 0.00
1.29.1.1.2 > 300mm girth. 0 m2 0.00
Isolated areas <= 1.00m2 irrespective of location or
1.29.1.1.3 girth. 0 nr 0.00
1.29.1.2 Painting to glazed surfaces
1.29.1.2.1 <= 300mm girth. 0m 0.00
1.29.1.2.2 > 300mm girth. 0 m2 0.00
1.29.1.2.3 girth. 0 nr 0.00
1.29.1.3 Painting structural metalwork
1.29.1.3.1 <= 300mm girth. 0m 0.00
1.29.1.3.2 > 300mm girth. 0 m2 0.00
1.29.1.3.3 > 300mm girth. 0 m2 0.00
1.29.1.3.4 girth. 0 nr 0.00
1.29.1.4 Painting radiators, type stated
1.29.1.4.1 <= 300mm girth. 0m 0.00
Page 93
29 DECORATION
Qty Unit Rate N K
DECORATION continued ...

Painting & clear finishes continued ...
Painting radiators, type stated continued ...
1.29.1.4.2 > 300mm girth. 0 m2 0.00
1.29.1.4.3 girth. 0 nr 0.00
1.29.1.5 Painting gutters
1.29.1.5.1 <= 300mm girth. 0m 0.00
1.29.1.5.2 > 300mm girth. 0 m2 0.00
1.29.1.5.3 > 300mm girth. 0 m2 0.00
1.29.1.5.4 girth. 0 nr 0.00
1.29.1.6 Painting pipes
1.29.1.6.1 <= 300mm girth. 0m 0.00
1.29.1.6.2 > 300mm girth. 0 m2 0.00
1.29.1.6.3 girth. 0 nr 0.00
1.29.1.7 Painting services, type stated
1.29.1.7.1 <= 300mm girth. 0m 0.00
1.29.1.7.2 > 300mm girth. 0 m2 0.00
1.29.1.7.3 girth. 0 nr 0.00
1.29.1.8 Painting railings, fences and gates
1.29.1.8.1 <= 300mm girth. 0m 0.00
1.29.1.8.2 > 300mm girth. 0 m2 0.00
1.29.1.8.3 girth. 0 nr 0.00
1.29.3 Decorative papers or fabrics
1.29.3.9 Walls and columns
1.29.3.9.1 Areas <= 1.00m2. 0m 0.00
1.29.3.9.2 Areas > 1.00m2. 0 m2 0.00
1.29.3.10 Ceilings and beams
1.29.3.10.1 Areas <= 1.00m2. 0m 0.00
1.29.3.10.2 Areas > 1.00m2. 0 m2 0.00
1.29.3.11 Borders
1.29.3.12 Motifs
Page 94
1.29 DECORATION
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 95
1.30 SUSPENDED CEILINGS
Qty Unit Rate N K

1.30 Drawings
Plans showing location of the work; Reflected

ceiling plans showing scope and complexity of
1.30.0.1.5.1 the work. item 0.00
Kind and quality of materials; size(s) of panels and

strips; construction of suspension framing and
systems; method of fixing; nature of background;
nature of services located in the ceiling void; nature
1.30.0.2.5 of integral services and fittings
Services located within the ceiling void; Location
1.30.0.3.5.1 or integral services and fittings item 0.00
1.30.1 Demountable suspended ceilings
1.30.1.1 Ceilings
1.30.1.1.1 Depth of suspension <= 150mm. 0 m2 0.00
1.30.1.1.2 Depth of suspension 150- 500mm. 0 m2 0.00
1.30.1.1.3 Depth thereafter in 500mm stages. 0 m2 0.00
1.30.1.2 Plenum ceilings
1.30.1.3 Beams
1.30.1.4 Bulkheads
1.30.1.5 Isolated strips
1.30.1.5.1 Width <= 600mm. 0m 0.00
Page 96
Qty Unit Rate N K
SUSPENDED CEILINGS continued ...

Demountable suspended ceilings continued ...
Isolated strips continued ...
1.30.1.5.2 Width thereafter in 300mm stages. 0m 0.00
1.30.1.6 Upstands
1.30.1.6.1 Width <= 600mm. 0m 0.00
1.30.1.7 Access panels
1.30.1.7.2 Proprietary reference. 0 nr 0.00
1.30.1.8 Edge trims
1.30.1.9 Angle trims
1.30.1.10 Fire barriers
1.30.1.11 Collars for services passing through fire barriers
1.30.1.11.1 Diameter of pipe. 0 nr 0.00
1.30.1.11.2 Size of trunking. 0 nr 0.00
1.30.1.12 Fittings
1.30.1.13 Shadow gap battens
Page 97
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 98
1.31 INSULATION, FIRE STOPPING & FIRE PROTECTION
Qty Unit Rate N K
1.31 INSULATION, FIRE STOPPING & FIRE PROTECTION

1.31 Drawings
Plans, section and details sufficient to show the

scope and location of the various works relating
1.31.0.1.5.1 to this section. item 0.00
Type, quality and thickness of materials; fire

rating where required; extent of laps; method of
fixing, laying or applying where not at the
1.31.0.2.5.1 discretion of the contractor. item 0.00
Board, sheet, quilt, sprayed, loose fill or foamed
1.31.1 insulation and fire protection
1.31.1.1 Boards
1.31.1.1.2 Purpose and dimensioned description. 0m 0.00
1.31.1.2 Sheets
1.31.1.2.40 Soffit.
1.31.1.3 Quilts
1.31.1.4 Loose
1.31.1.5 Sprayed
1.31.1.6 Filling cavities
1.31.1.7 Fire stops, type stated
1.31.1.7.1 Dimensioned description 0m 0.00
1.31.1.8 Fire sleeves, collars and the like
1.31.1.8.1 Dimensioned description 0 Nr 0.00
To Summary N 0.00
Page 99
1.32 FURNITURE, FITTINGS AND EQUIPMENT
Qty Unit Rate N K
1.32 FURNITURE, FITTINGS AND EQUIPMENT

1.32 Drawings
1.32.0.1.5.1 Location drawings item 0.00
Sufficient information to design, procure or

manufacture the items; Kind and quality of
1.32.0.2.5.1 materials; item 0.00
1.32.0.3.5.1 Components item 0.00
1.32.1 General fixtures, furnishings & equipment
1.32.1.1 Fixtures, fittings or equipment without services
1.32.1.1.1 Component drawing reference. 0 nr 0.00
1.32.1.1.2 Dimensioned diagram. 0 nr 0.00
1.32.1.1.3 Manufacturers reference. 0 nr 0.00
1.32.1.2 Fixtures, fittings or equipment with services
1.32.1.2.1 Component drawing reference. 0 nr 0.00
1.32.1.2.2 Dimensioned diagram. 0 nr 0.00
1.32.1.2.3 Manufacturers reference. 0 nr 0.00
1.32.1.2 Ancillary items not provided with item of equipment
1.32.1.2.1 Type, size and method of jointing stated. 0 nr 0.00
Fixtures, fittings or equipment supplied by the
1.32.1.4 employer
1.32.1.4.1 Type and size. 0 nr 0.00
1.32.1.5 Signwriting
To Summary N 0.00
Page 100
1.33 DRAINAGE ABOVE GROUND
Qty Unit Rate N K

1.33 Drawings
Roof Plan(s); Floor plans of any floors that have

drainage installation; Principal selection and
1.33.0.1.5.1 elevation. item 0.00
Location of installation; nature of background;

method of spacing of fixing; method and spacing
of joints; description of materials; type of
1.33.0.2.5.1 brackets or support; finish item 0.00

1.33.0.3.5 shown on drawings as part of the Bills
1.33.0.3.5.1 Scope and location of work item 0.00
1.33.1 Rainwater installations
1.33.1.1 Pipework
1.33.1.1.1 Nominal diameter. 0m 0.00
1.33.1.2 Pipework ancillaries
1.33.1.3 Items extra over the pipe in which they occur
1.33.1.3.1 Fittings, pipe size <= 65mm. 0 nr 0.00
1.33.1.3.2 Fittings, nominal pope size > 65mm. 0 nr 0.00
1.33.1.4 Pipe sleeves through walls, floors and ceilings
1.33.1.4.1 Type and nominal diameter of pipe. 0 nr 0.00
1.33.1.5 Gutters
1.33.1.5.1 Nominal size. 0m 0.00
1.33.1.6 Gutter ancillaries
1.33.1.7 Items Extra over the gutter in which they occur
Marking, position of and leaving or forming all holes,

mortices, chases and the like required in the
1.33.1.8 structure.
1.33.1.8.1 Number and type of installations. item 0.00
Page 101
33 DRAINAGE ABOVE GROUND
Qty Unit Rate N K
DRAINAGE ABOVE GROUND continued ...

Rainwater installations continued ...
1.33.1.9 Identification
1.33.1.9.1 Plates. 0 nr 0.00
1.33.1.10 Testing and commissioning
1.33.1.11 Preparing drawings
1.33.1.11.1 Number of copies stated. item 0.00
1.33.1.12 Operating manuals and instructions
1.33.1.12.1 Number of copies stated. item 0.00
Page 102
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 103
1.34 DRAINAGE BELOW GROUND
Qty Unit Rate N K

1.34 Drawings
1.34.0.1.5 emasurement
1.34.0.1.5.1 Drawings layout(s) item 0.00
Mandatory information; That must be shown on the

drawings that must accompany this sectiob of
Layout of drawings showing scope of work; Invert

depths; Cover levels; pipe sizes; details of
manhole, inspection chambers and the pits,
tanks, chambers or the like; work outside site
1.34.0.2.5.1 boundary. item 0.00
1.34.1 Storm water drain systems
1.34.1.1 Drain runs
1.34.1.1.1 Average trench depth in 500mm increments. 0m 0.00
1.34.1.1.2 Type and nominal diameter of pipes 0m 0.00
Multiple pipes stating number and nominal diameter
1.34.1.1.3 of pipes 0m 0.00
Items extra over drain runs irrespective of depth or
1.34.1.2 pipe size
Breaking up hard surface pavings: thickness
1.34.1.2.1 stated. 0 m2 0.00
1.34.1.2.2 Lifting and preserving turf: thickness stated. 0 m2 0.00
1.34.1.2.4 Excavating in and removing hazardous material. 0 m3 0.00
Excavating in running silt, running sand or other
1.34.1.2.5 unstable ground. 0 m3 0.00
1.34.1.2.6 Excavating below ground water level. 0 m3 0.00
1.34.1.2.7 Next to existing live services. 0m 0.00
1.34.1.2.8 Around existing live services crossing trench. 0 nr 0.00
1.34.1.3 Pipe fittings
1.34.1.5 Pumps
1.34.1.5.1 Size and capacity stated. 0 nr 0.00
Page 104
Qty Unit Rate N K
DRAINAGE BELOW GROUND continued ...

1.34.1 Manholes
Detailed description stating maximum internal size
1.34.1.6.1 of chamber. 0 nr 0.00
Depth from top surface of cover to invert level in
1.34.1.6.2 250mm stages 0 nr 0.00
1.34.1.6.3 proprietary system, details stated 0 nr 0.00
1.34.1.7 Inspection chambers
1.34.1.1 250mm stages 0 nr 0.00
1.34.1.2 Proprietary system, details stated 0 nr 0.00
1.34.1.7.1 of chamber. 0 nr 0.00
1.34.1.8 Soakaways
1.34.1.8.1 of chamber. 0 nr 0.00
1.34.1.8.5 250mm stages
1.34.1.8.1 Proprietary system, details stated 0 nr 0.00
1.34.1.9 Cesspits
1.34.1.9.1 of chamber. 0 nr 0.00
1.34.1.10 Septic tanks,
1.34.1.10.1 of chamber. 0 nr 0.00
1.34.1.11 Other tanks and pits, type stated
1.34.1.11.1 of chamber. 0 nr 0.00
1.34.1.12 Extra over the excavation for:
1.34.1.12.1 stated. 0 m2 0.00
1.34.1.13 Sundries
1.34.1.13.1 Detailed dimensioned description. 0 nr 0.00
1.34.1.14 Covers and frames
Page 105
Qty Unit Rate N K
DRAINAGE BELOW GROUND continued ...

Manholes continued ...
1.34.1.15 Marker posts
1.34.1.16 Connections
1.34.1.17 Testing and commissioning
1.34.1.17.1 Detailed description. item 0.00
1.34.1.17.2 Type of test and standard to be achieved item 0.00
Page 106
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 107
1.35 SITE WORKS
Qty Unit Rate N K
1.35 SITE WORKS

1.35 Drawings
1.35.0.1.5.1 Site plans and sections; components details. item 0.00
Kind, quality, shape and size of materials and

components; Treatment and layout of joints;
Nature of base; Preparatory work; Bedding and/or
1.35.0.2.5.1 methods of fixing item 0.00

drawings that must accompany this section of
1.35.0.3.5.1 Scope and location of the work item 0.00
1.35.1 Road & path pavings
1.35.1.1 Kerbs
1.35.1.2 Edgings
1.35.1.3 Channels
1.35.1.4 Paving accessories
1.35.1.5.1 Special units. 0 nr 0.00
1.35.1.5.2 Accessories. 0 nr 0.00
Page 108
1.35 SITE WORKS
Qty Unit Rate N K
SITE WORKS continued ...

Road & path pavings continued ...
1.35.1.6 In-situ concrete
All measured in accordance with rules of Section
1.35.1.6.5 11, In- situ 'Concrete works'.
1.35.1.7 Formwork
1.35.1.8 Reinforcement
1.35.1.9 Joints
1.35.1.10 Worked finishes
1.35.1.11 Accessories cast in
1.35.1.12 Coated macadam and asphalt
1.35.1.12.1 Over 300mm wide: thickness stated. 0 m2 0.00
Not exceeding 300mm wide: thickness and width
1.35.1.12.2 stated. 0m 0.00
1.35.1.12.3 Thickness and girth on face stated. 0m 0.00
1.35.1.13 Gravel, hoggin and woodchip
1.35.1.13.1 Over 300mm wide: thickness stated. 0 m2 0.00
1.35.1.13.2 stated. 0m 0.00
Interlocking brick and blocks, slabs, bricks, blocks,
1.35.1.14 setts and cobbles
1.35.1.14.1 Over 300mm wide. 0 m2 0.00
1.35.1.14.2 stated. 0m 0.00
1.35.1.14.3 Thickness and girth on face stated. 0m 0.00
1.35.1.15.1 Special units. 0 nr 0.00
1.35.1.15.2 Accessories. 0 nr 0.00
Page 109
1.35 SITE WORKS
Qty Unit Rate N K
SITE WORKS continued ...

Road & path pavings continued ...
Accessories continued ...
1.35.1.17 Site furniture
1.35.1.17.1 Dimensioned description; Manufacturers reference 0 nr 0.00
1.35.1.18 Liquid applied surfacings
1.35.1.19 Sheet surfacings
1.35.1.20 Tufted surfacings
1.35.1.21 Proprietary coloured sports surfacings
1.35.1.22 Surface dressings
1.35.1.23 Line markings, width stated
1.35.1.23.1 Width <= 300mm. 0m 0.00
1.35.1.24 Letters, figures and symbols
Sheet linings to pools, lakes, ponds, waterways and
1.35.1.25 the like
1.35.1.1.25.1 Width <= 300mm 0M 0.00
1.35.1.1.25.2 Width > 300mm 0 M2 0.00
1.35.1.26 Spot items
1.35.1.1.26.1 Dimensioned diagram or Dimensioned description. 0 nr 0.00
Page 110
1.35 SITE WORKS
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 111
1.36 FENCING
Qty Unit Rate N K
1.36 FENCING
1.36 Drawings
1.36.0.1.5.1 Site plans and sections; Components details item 0.00
Kind and quality of materials; methods of

construction; surface treatments or finishes
applied as part of the manufacturing process or
applied before delivery to site; nature and size of
1.36.0.2.5.1 backfilling. item 0.00

Scope and location of the work; location of

fencing designed for sloping ground; pre-contract
1.36.0.3.5.1 ground water level(s) and date(s) established. item 0.00
1.36.1 Fencing, type stated
1.36.1.1 Height of fence. 0m 0.00
1.36.2 Extra over for special supports
1.36.2.1 Size: height and depth stated. 0 nr 0.00
1.36.3 Independent gate posts
1.36.3.1 Size: height and depth stated. 0 nr 0.00
Items extra over fencing, supports and special

supports and independent gate posts irrespective
1.36.4 of type
1.36.4.1 Excavating below ground water level. 0 m3 0.00
1.36.4.2 Excavating in hazardous material: details stated. 0 m3 0.00
1.36.4.3 Breaking out existing. 0 m3 0.00
1.36.4.4 Breaking up existing hard pavings: thickness stated. 0 m3 0.00
1.36.5 Gates
1.36.5.1 Height and width stated. 0 nr 0.00
1.36.6 Ironmongery
1.36.6.1 Type of item, unit or set stated. 0 nr 0.00
To Summary N 0.00
Page 112
1.37 SOFT LANDSCAPING
Qty Unit Rate N K

1.37 Drawings
Site plans and sections; components details;
1.37.0.1.5.1 planting schedule. item 0.00
Kind, quality, size and composition of materials;

preparatory work; timing of operations; size and
type of pits; holes and trenches, eithr excavated
of formed; type of support and ties; special filling
materials; mehod of labelling; work on roofs and
1.37.0.2.5.1 the like stated. item 0.00

1.37.0.3.5.1 Scope and location of the work item 0.00
1.37.1 Cultivating
1.37.1.1 Depth stated. 0 m2 0.00
1.37.2 Surface applications
1.37.2.1 Type and rate stated; Method of application stated. 0 m2 0.00
1.37.3 Seeding
1.37.3.1 Rate stated. 0 m2 0.00
1.37.4 Turfing
1.37.4.1 Type and thickness stated. 0 m2 0.00
1.37.4.2 Type, width and thickness stated. 0m 0.00
1.37.5 Trees
1.37.5.1 Botanical name. 0 nr 0.00
1.37.6 Young nursery stock trees
1.37.7 Shrubs
1.37.8 Hedge plants
1.37.9 Plants
1.37.9.1 Botanical name. 0 m2 0.00
Page 113
37 SOFT LANDSCAPING
Qty Unit Rate N K
SOFT LANDSCAPING continued ...

1.37.1 Bulbs, corms and tubers
1.37.10.1 Botanical name. 0 m2 0.00
1.37.11 Plant containers
1.37.11.1 Dimensioned description. 0 nr 0.00
1.37.12 Protection
1.37.12.1 Temporary fencing: type and duration stated. 0m 0.00
1.37.12.2 Tree guards, dimensioned description. 0 nr 0.00
Wrappings: height of wrapping and girth of tree
1.37.12.3 stated. 0 nr 0.00
Anti-desiccant sprays, height and girth of tree or
1.37.12.4 spread of plant stated 0 nr 0.00
1.37.12.5 General: details stated. item 0.00
Page 114
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 115
1.38 MECHANICAL SERVICES
Qty Unit Rate N K

1.38 Drawings
1.38.0.1.5 measurement include the following
Floor and site plans detailing layout of systems;

System schematics; cross section and
elevations; detail layouts for plant room and
principal services installation areas; specific
installation details for equipment and fittings;
1.38.0.1.5.1 equipment schedules. item 0.00
Type, quality, size or thickness of the materials;
1.38.0.2.5.1 method of fixing; locations. item 0.00
1.38.0.4.1 Enter details item 0.00
1.38.1 Primary equipment
1.38.1.1 System
Location of installation - Roofs, high or low level in
1.38.1.1.1 plantrooms, risers or ser 0 nr 0.00
1.38.1.1.2 Off-load and position primary equipment. 0 nr 0.00
Assembly of composite items of primary
1.38.1.1.3 equipment. 0 nr 0.00
1.38.1.2 Terminal equipment and fittings
1.38.1.2.1 System. 0 nr 0.00
1.38.1.3 Pipework
1.38.1.3.1 Straight; Curved, radii stated; flexible; extended 0m 0.00
1.38.1.4 Alternative 1 - pipe fittings
Type, material, finish, nominal diameter, method of
1.38.1.4.1 jointing. 0 nr 0.00
1.38.1.5 Pipe ancillaries
1.38.1.5.1 jointing. 0 nr 0.00
1.38.1.6 Ventilation ducts
1.38.1.6.5 Ducts
Materials, dimensions, method of jointing, finish,
1.38.1.6.1 section shape, fixing and background for fixing 0 m2 0.00
1.38.1.6 Altrnative 1 duct ancillaries
Joints, flanges, tees, sets, junctions, reducers,
1.38.1.1 spigot, test hole and the like 0 nr 0.00
Page 116
Qty Unit Rate N K
MECHANICAL SERVICES continued ...

Primary equipment continued ...
1.38.1.8 Duct ancillaries
1.38.1.8.1 Damers in duct heater/ cooling coils 0 nr 0.00
1.38.1.9 Insulation and fire protection
1.38.1.9.1 To equipment and fittings 0 nr 0.00
Thickness, material, finish, nominal diameter of
1.38.1.9.2 pipe. 0m 0.00
Alternative 1 - Insulation and fire protection to pipe
1.38.1.10 fittings
Unions, connectors, flanges, bends, tees, sets,

junctions, reducers, test points, bosses, sockets,
1.38.1.10.1 tapering and the like. 0 nr 0.00
1.38.1.11 Insulation and fire protection to pipe ancillaries
1.38.1.11.1 jointing. 0 nr 0.00
Valves; strainers; expansion bellows; anchors; guides

and rolelrs; outlets; rainwater heads; tundishes';
1.38.1.12 traps; pipe sleeves and the like.
1.38.1.12.1 Thickness, material, finish 0 nr 0.00
Alternative 1 - Insulation and fire protection to duct
1.38.1.13 fittings
Joints, flanges,bends, tees,sets,junctions,
1.38.1.13.1 reducers,spigots, test holes and the like. 0 m2 0.00
1.38.1.14 Insulation and fire protection to equipment
Thickness, material, finish, nominal area,
1.38.1.14.1 performance rating. 0 m2 0.00
1.38.1.15 Fire stopping
Material, location, size of opening to be stopped,
1.38.1.15.1 size of service stopping to b 0 nr 0.00
1.38.1.16 Identification
1.38.1.16.1 Plates. item 0.00
1.38.1.16.2 Discs. item 0.00
1.38.1.16.3 Labels. item 0.00
1.38.1.17 Testing
1.38.1.17.1 Describe item 0.00
1.38.1.18 Commissioning
1.38.1.19 System validation
Page 117
Qty Unit Rate N K
MECHANICAL SERVICES continued ...

Primary equipment continued ...
1.38.1.20 Operation and maintenance manuals
1.38.1.21 Drawing preparation
1.38.1.21.1 Classification of drawings. item 0.00
1.38.1.22 Training
1.38.1.23 Loose ancillaries
1.38.1.23.1 Keys, tools, spares, chemicals and the like. item 0.00
1.38.1.24 Post-completion services
1.38.1.24.1 Maintenance, adjustments, servicing and the like. item 0.00
Page 118
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 119
1.39 ELECTRICAL SERVICES
Qty Unit Rate N K

1.39 Drawings
1.39.0.1.5 measurment include the following
Floor and site plans detailing layout of systems;

system schematics; cross sections and
elevations; detail layout for plantrooms; specific
installationdetails for equipment and fittings;
1.39.0.1.5.1 equipment schedules item 0.00
Mandatory information; Type, quality size or
1.39.0.2.5 thickness of materials; method of fixing; location
1.39.1 Primary equipment
1.39.1.1 System. 0 nr 0.00
1.39.1.2 Off-load and position primary equipment. 0 nr 0.00
1.39.1.3 Assembly of composite items of primary equipment. 0 nr 0.00
1.39.2 Terminal equipment and Fittings
1.39.2.1 System. 0 nr 0.00
Cable containment (excluding those in final
1.39.3 circuits)
1.39.3 Cable containment
Type, material, finish, section shape, dimensions,

number of compartments, method of jointing, fixings
1.39.3.1 and background for fixing 0m 0.00
1.39.3 Alternative 1-cable containment fittings
Joint boxes, connectors, flanges, bends, tees,sets,

junctions, reducers, spigots, fire barriers and the like;
1.39.3.1 Type size, overall length and type of adaptors stated 0 nr 0.00
1.39.4 Cables
Type, rating, size, number of cores, material,
1.39.4.1 armouring, sheathing, method of j 0m 0.00
1.39.5 Cable terminations and joints
Type, rating, size, number of cores, material,
1.39.5.1 armouring, sheathing. 0 nr 0.00
1.39.6 Final circuits
Cable type, rating, size, material, sheathing, number
1.39.6.1 and type of points. 0 nr 0.00
1.39.7 Modular wiring systems
Cable type, rating, size, material, sheathing, number
1.39.7.1 and type of points. 0 nr 0.00
Page 120
Qty Unit Rate N K
ELECTRICAL SERVICES continued ...

1.39.8 Busbar
Type, rating, material, number of bars, method of
1.39.8.1 jointing, fixings and buckaround 0m 0.00
1.39.9 Alternative 1 - busbar fittings
Joints, flanges,bends, tees,sets,junctions,
1.39.9.1 reducers,spigots, test holes and the like. 0 nr 0.00
1.39.1 Tapes
Type, rating, size, material, sheathing, method of
1.39.10.1 jointing, fixings and background 0m 0.00
Electrodes, earth rods, air terminations,
1.39.11 termination bars
Type, rating, size, material, method of jointing, fixings
1.39.11.1 and background for fix 0 nr 0.00
Fire stopping and other associated fire protect
1.39.12 work
Material, location, size of opening to be stopped, size
1.39.12.1 of service stopping to b 0 nr 0.00
1.39.13 Identification
1.39.13.1 Plates. item 0.00
1.39.13.2 Discs. item 0.00
1.39.13.3 Labels. item 0.00
1.39.13.4 Tapes. item 0.00
1.39.14 Testing
1.39.14.1 Describe. item 0.00
1.39.15 Commissioning
1.39.16 System validation
1.39.17 Operation and maintenance manuals
1.39.18 Drawing preparation
1.39.18.1 Classification of drawings. item 0.00
1.39.19 Training
1.39.2 Loose ancillaries
1.39.20.1 Keys, tools, spares, chemicals. item 0.00
1.39.21 Post practical completion Services servicing.
1.39.21.1 Maintenance, adjustments and item 0.00
Page 121
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 122
1.40 TRANSPORTATION
Qty Unit Rate N K
1.40 TRANSPORTATION
1.40 Drawings
1.40.0.1.5.1 Locations plans item 0.00
Kind, quality and size or thickness of materials;
1.40.0.2.5.1 location; Earth conncetors, straps and links. item 0.00

1.40.0.3.5.1 Overall dimensions of items orr system. item 0.00
1.40.1 System
Type, size, capacity, load, rating, length, number of

stops, storey height, associated integrated or remote
1.40.1.1 ancillaries, controls, indicators or components 0 nr 0.00
1.40.1.2 Off-load and position primary equipment. 0 nr 0.00
1.40.1.3 Assembly of composite items of primary equipment. 0 nr 0.00
Free issue fixing steelwork and other components
1.40.1.4 for installation by others 5 Item 0.00
Interface with and connection to systems supplied
1.40.1.5 and installed by others Item 0.00
Fire stopping and other associated fire protect
1.40.1 work
Material, location, size of opening to be stopped, size
1.40.1.1 of service stopping to b 0 nr 0.00
1.40.3 Identification
1.40.3.1 Plates item 0.00
1.40.3.2 Discs item 0.00
1.40.3.3 Labels item 0.00
1.40.4 Testing and commissioning.
1.40.5 System validation.
1.40.6 Operation and maintenance manuals.
Page 123
40 TRANSPORTATION
Qty Unit Rate N K
TRANSPORTATION continued ...

1.40.7 Drawing preparation.
1.40.8 Training.
1.40.9 Loose ancillaries.
1.40.9.1 Keys, tools, spares, chemicals. item 0.00
1.40.1 Post practical completion services.
1.40.10.1 Maintenance, adjustments and servicing. item 0.00
Page 124
1.40 TRANSPORTATION
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 125
1.41 BUILDERS WORK IN CONNECTION WITH MECHANICAL, ELECTRICAL & TRANSPORTATION INSTALLATIONS
Qty Unit Rate N K
BUILDERS WORK IN CONNECTION WITH

MECHANICAL, ELECTRICAL & TRANSPORTATION
1.41 INSTALLATIONS
1.1.41.0. Section Preambles / Preliminaries / Notes
1.41.0.1 Drawings
Drawings; The following drawings should be referred
1.41.0.1.5 to as part of the pricing of the Bill
1.41.0.1.5.1 sections and elevations; as drawings .... item 0.00
1.41.0.2 Madatory infomation
1.41.0.3 Minimum information

1.41.0.3.5 shown on drawings as part of the Bills
1.41.0.4 Specific information
1.41.0.4.1 Enter details item 0.00
1.41.1 Work for services installations in new buildings
1.41.1.1 General builders work in connection with:
1.41.1.1.1 Type of Installation stated. item 0.00
Marking position of holes, mortices and chases in the
1.41.1.2 structure.
1.41.1.2.1 Type of Installation stated. item 0.00
1.41.1.3 Pipe and duct sleeves
1.41.1.3.1 Size and type stated. 0 nr 0.00
1.41.1.4 Bases, plinths and the like
1.41.1.4.1 Size stated. 0 nr 0.00
1.41.1.5 Duct covers and frames
1.41.1.5.1 Width and type stated. 0m 0.00
Supports for services not provided by services
1.41.1.6 contractor
1.41.1.6.1 Size and type stated. 0m 0.00
1.41.1.6.2 Size, length and type stated. 0 nr 0.00
1.41.1.7 Catenary cables
1.41.1.7.1 Size and type stated. 0m 0.00
Page 126
Qty Unit Rate N K

INSTALLATIONS continued ...
Work for services installations in existing buildings
1.41.2 Item or work to be measure
1.41.2.8 Cutting holes through existing structures
1.41.2.8.1 Size stated. 0 nr 0.00
1.41.2.9 Cutting mortices and sinkings in existing structure
1.41.2.9.1 Size stated. 0 nr 0.00
1.41.2.10 Cutting chases through existing structures
1.41.2.10.1 Size and number of services stated. 0m 0.00
1.41.2.11 Lifting and replacing floor boards
1.41.2.11.1 Size and number of services stated. 0m 0.00
1.41.2.12 Lifting and replacing duct covers or chequer plates
1.41.2.12.1 Width and type stated. 0m 0.00
1.41.3 Work for external services installations
1.41.3.13 Underground service runs
1.41.3.13.1 Average trench depth in 500mm increments. 0m 0.00
1.41.3.13.2 Type and nominal diameter of pipe duct. 0m 0.00
Multiple pipe ducts stating number and nominal
1.41.3.13.3 diameter of pipe ducts. 0m 0.00
Pipe duct(s) supplied by others; type and nominal
1.41.3.13.4 diameter. 0m 0.00
Type and size of cover tile(s) or identification
1.41.3.13.5 tape(s). 0m 0.00
Items extra over service runs irrespective of depth or
1.41.3.14 pipe size
1.41.3.14.1 stated. 0 m2 0.00
1.41.3.14.7 Next to existing live services. 0m 0.00
1.41.3.14.8 Around existing live services crossing trench. 0 nr 0.00
1.41.3.15 Pipe duct fittings
Page 127
Qty Unit Rate N K

INSTALLATIONS continued ...
Work for external services continued ...
1.41.3.17 Manholes
1.41.3.17.1 of chamber. 0 nr 0.00
1.41.3.17.2 of chamber. 0 nr 0.00
1.41.3.18 Access chambers
1.41.3.18.1 of chamber. 0 nr 0.00
1.41.3.19 Valve chambers
1.41.3.19.1 of chamber. 0 nr 0.00
1.41.3.20 Inspection chambers
1.41.3.20.1 of chamber. 0 nr 0.00
1.41.3.21 Surface boxes
1.41.3.21.1 of chamber. 0 nr 0.00
1.41.3.22 Stopcock pits
1.41.3.22.1 of chamber. 0 nr 0.00
1.41.3.22.2 stated. 0 m2 0.00
1.41.3.22.10 Detailed description. item 0.00
Page 128
Qty Unit Rate N K
Collection
To Summary N 0.00
Page 129
Qty Unit Rate N K
Summary
1.2 OFF-SITE MANUFACTURED ... Page 3 N 0.00
1.3 DEMOLITIONS Page 6 N 0.00
1.4 ALTERATIONS, REPAIRS AND ... Page 10 N 0.00
1.5 EXCAVATING & FILLING Page 14 N 0.00
1.6 GROUND REMEDIATION AND SOIL ... Page 17 N 0.00
1.7 PILING Page 20 N 0.00
1.8 UNDERPINNING Page 23 N 0.00
1.9 DIAPHRAGM WALLS & EMBEDDED ... Page 26 N 0.00
1.10 CRIB WALLS, GABIONS & ... Page 27 N 0.00
1.11 IN-SITU CONCRETE WORKS Page 34 N 0.00
1.12 COMPOSITE / PRECAST CONCRETE Page 37 N 0.00
1.13 PRECAST CONCRETE Page 43 N 0.00
1.14 MASONRY Page 47 N 0.00
1.15 STRUCTURAL METALWORK Page 51 N 0.00
1.16 CARPENTRY Page 54 N 0.00
1.17 SHEET ROOF COVERINGS Page 57 N 0.00
1.18 TILE AND SLATE ROOF AND WALL ... Page 58 N 0.00
1.19 WATERPROOFING Page 61 N 0.00
1.20 PROPRIETARY LININGS & PARTITIONS Page 65 N 0.00
Carried Forward N 0.00
Page 130
Qty Unit Rate N K
Summary continued ... 0.00
1.21 CLADDING AND COVERING Page 68 N 0.00
1.22 GENERAL JOINERY Page 72 N 0.00
1.23 WINDOWS, SCREENS & LIGHTS Page 75 N 0.00
1.24 DOORS, SHUTTERS AND HATCHES Page 78 N 0.00
1.25 STAIRS, WALKWAYS AND ... Page 81 N 0.00
1.26 METALWORK Page 84 N 0.00
1.27 GLAZING Page 87 N 0.00
1.28 FLOOR, WALL, CEILING & ROOF ... Page 92 N 0.00
1.29 DECORATION Page 95 N 0.00
1.30 SUSPENDED CEILINGS Page 98 N 0.00
1.31 INSULATION, FIRE STOPPING & FIRE ... Page 99 N 0.00
1.32 FURNITURE, FITTINGS AND ... Page 100 N 0.00
1.33 DRAINAGE ABOVE GROUND Page 103 N 0.00
1.34 DRAINAGE BELOW GROUND Page 107 N 0.00
1.35 SITE WORKS Page 111 N 0.00
1.36 FENCING Page 112 N 0.00
1.37 SOFT LANDSCAPING Page 115 N 0.00
1.38 MECHANICAL SERVICES Page 119 N 0.00
1.39 ELECTRICAL SERVICES Page 122 N 0.00
Carried Forward N 0.00
Page 131
Qty Unit Rate N K
Summary continued ... 0.00
1.40 TRANSPORTATION Page 125 N 0.00
1.41 BUILDERS WORK IN CONNECTION ... Page 129 N 0.00
Total for Bill N 0.00
Page 132

BESMM4 1-41 Sections Priced

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BESMM4 1-41 Sections Priced

Uploaded by

Copyright:

Available Formats

BESMM4 Work Sections Master Bill

2 OFF-SITE MANUFACTURED MATERIALS, COMPONENTS OR BUILDINGS

Qty Unit Rate N K

OFF-SITE MANUFACTURED MATERIALS,

Kind and Quality of materials, method of fixing or

Minimum information that must be shown on the

Overall dimensions.; Description of component.;

Qty Unit Rate N K

OFF-SITE MANUFACTURED MATERIALS,

Qty Unit Rate N K

Total from Page 1 N 0.00

Total from Page 2 N 0.00

Qty Unit Rate N K

Brief description and size of the structure to be

Minimum information that must be shown on the

Lowest level of demolition, Extent of any

Qty Unit Rate N K

DEMOLITIONS continued ...

Detailed description of type of material to be

Qty Unit Rate N K

Total from Page 4 N 0.00

Total from Page 5 N 0.00

Qty Unit Rate N K

4.00 ALTERATIONS, REPAIRS AND CONSERVATION

Description of operations where not left to

The following references are to the minimum level of

Qty Unit Rate N K

ALTERATIONS, REPAIRS AND continued ...

Qty Unit Rate N K

ALTERATIONS, REPAIRS AND continued ...

Detailed description of type of material to be

Qty Unit Rate N K

Total from Page 7 N 0.00

Total from Page 8 N 0.00

Total from Page 9 N 0.00

Qty Unit Rate N K

1.50 EXCAVATING & FILLING

Site plan(s), showing all major excavations;

Ground water Level(s) and date(s) established;

Minimum information; The following references are

Original and proposed ground levels; Any item(s)

Qty Unit Rate N K

EXCAVATING & FILLING continued ...

Qty Unit Rate N K

EXCAVATING & FILLING continued ...

Qty Unit Rate N K

Total from Page 11 N 0.00

Total from Page 12 N 0.00

Total from Page 13 N 0.00

Qty Unit Rate N K

1.60 GROUND REMEDIATION AND SOIL STABILISATION

Ground Conditions; Ground water level(s) and

Minimum information thant must be shown on the

Original and proposed ground levels; Any item(s)

Qty Unit Rate N K

GROUND REMEDIATION AND SOIL continued ...

Qty Unit Rate N K

Total from Page 15 N 0.00

Total from Page 16 N 0.00

Qty Unit Rate N K

Site plan showing site boundary and any adjacent

Types of piles; Ground water level(s) and date(s)