FusionSolar

Commercial & Industrial

Smart PV Solution
About Huawei

Huawei is a leading global provider of information and communications technology (ICT) infrastructure and smart devices. With
integrated solutions across four key domains – telecom networks, IT, smart devices, and cloud services – we are committed to
bringing digital to every person, home and organization for a fully connected, intelligent world. Huawei's end-to-end portfolio of
products, solutions and services are both competitive and secure. Through open collaboration with ecosystem partners, we
create lasting value for our customers, working to empower people, enrich home life, and inspire innovation in organizations of all
shapes and sizes. At Huawei, innovation focuses on customer needs. We invest heavily in basic research, concentrating on
technological breakthroughs that drive the world forward.

Employees R&D Personnel Countries

207,000+ 55.4% 170+

Best Global Brands –
Interbrand R&D Investment Most Innovative Companies

86 4 8

300GW+
Inverter Shipment Accumulated

SOLAR.HUAWEI.COM
 Commercial & Industrial
Smart PV Solution
FusionSolar PVMS

Smart Power
PDC Sensor
Smart PV Inverter
PV Module
Grid

Smartlogger3000 Load
Smart String ESS
Smart PCS

Active Safety Higher Yields Maintenance Free

Level 4 AFCI, ahead in the 2 Strings per MPPT, More Energy No Fuse & Other Quick-wear Parts,
industry Yields Inverter Touch Free
0V voltage shutdown Built-in PID Recovery, Online Smart I-V Curve Diagnosis,
Secure Better Module
4 layer protections Performance Module Touch Free

SOLAR.HUAWEI.COM
SUN2000-12/15/17/20/25KTL-M5
Smart PV Controller

Active Safety Higher Yields Flexible Communication

AI Powered Arcing Protection Up to 30% More Energy with Optimizer WLAN, Fast Ethernet, 4G
Communication Supported

Efficiency [%] Efficiency Curve Circuit Diagram

99% DC
Switch
98% PV1+
PV1-
97% PV2+
PVA

DC/AC Output
PVAB-
96% PV2- EMI
Filter
Converter Isolation Relay
PV3+

95% 530 PV3- PVB

L1

PV4+ Output EMI L2

94% 600 PV4-
Filter Filter

L3
SPD
93% N
800 PE

92% SPD

91%
0% 20% 40% 60% 80% 100%
Load [%] SUN2000-12/15/17/20/25KTL-M5

SOLAR.HUAWEI.COM
 SUN2000-12/15/17/20/25KTL-M5
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification -12KTL-M5 -15KTL-M5 -17KTL-M5 -20KTL-M5 -25KTL-M5

Efficiency
Max. efficiency 98.4% 98.4% 98.4% 98.4% 98.4%
European weighted efficiency 97.9% 98.0% 98.1% 98.1% 98.2%

Input
Recommended max. PV power 1 18,000 Wp 22,500 Wp 25,500 Wp 30,000 Wp 37,500 Wp
Max. input voltage 2 1100 V
Full-load MPPT voltage range 370V~800V 410V~800V 440V~800V 480V~800V 530~800V
MPPT Operating voltage range 3 200 V ~ 1000 V
Start-up voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 30 A (two string) / 20 A (single string)
Max. short-circuit current 40 A
Number of MPP trackers 2
Max. number of inputs 4

Output
Grid connection Three phase
Rated output power 12,000 W 15,000 W 17,000 W 20,000 W 25,000 W
Max. apparent power 13,200 W 16,500 VA 18,700 VA 22,000 VA 27,500 VA
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 239.6 Vac / 415Vac, 3W + N + PE
Rated AC grid frequency 50 Hz
18.2A/380Vac 25.2A/380Vac 28.6A/380Vac 33.6A/380Vac 42.0A/380Vac
Max. output current 17.3A/400Vac 23.9A/400Vac 27.1A/400Vac 31.9A/400Vac 39.9A/400Vac
16.7A/415Vac 23.1A/415Vac 26.1A/415Vac 30.8A/415Vac 38.5A/415Vac
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%

Features & Protections

Overvoltage Category PV Ⅱ/AC Ⅲ
Input-side disconnection device Yes
Anti-islanding protection Yes
AC over-current protection Yes
DC reverse-polarity protection Yes
String fault detection Yes
DC surge protection TYPE II
AC surge protection CLASS II
Residual current monitoring unit Yes
Arc fault protection Yes
Ripple control ripple control Yes
Integrated PID recovery 4 Yes

General Data
Operation temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Relative humidity 0 % RH ~ 100% RH
Max. operating altitude 0 ～ 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Smart air cooling
Display LED Indicators; Integrated WLAN + FusionSolar App
RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Communication
4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (with mounting plate) 21kg (46.4 lb)
Dimensions (W x H x D)
546 x 460 x 228mm (21.5 x 18.1 x 9.0 inch)
(incl. mounting plate)
Degree of protection IP66
DC Connector Staubli MC4

Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-600W-P, MERC-1100W/1300W-P

Standard Compliance (more available upon request)

Safety EN/IEC 62109-1, EN/IEC 62109-2
G99, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, C10/11, ABNT, VFR 2019, UNE 217001, UNE
Grid connection standards
217002, RD 244, TOR D4, IEC61727, IEC62116
*1 Inverter max input PV power is 12,000 Wp/string when long strings are designed and fully connected with SUN2000-600W-P power optimizers.
*2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*3 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*4 SUN2000-12~25KTL-M5 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly)

SOLAR.HUAWEI.COM
SUN2000-30/36/40KTL-M3
Smart PV Controller

Smart Efficient Safe Reliable

8 strings intelligent monitoring Max. efficiency 98.7% Fuse free design Type II surge arresters for DC & AC

Efficiency Curve Circuit Diagram

Efficiency [%]
99.00%

98.50%

98.00%

97.50%

97.00%
600V
96.50% 540V
96.00% 800V

95.50%

95.00%
0.00% 20.00% 40.00% 60.00% 80.00% 100.00%

Load [%] SUN2000-30/36/40KTL-M3

SOLAR.HUAWEI.COM
 SUN2000-30/36/40KTL-M3
Technical Specification

Technical Specification SUN2000-30KTL-M3 SUN2000-36KTL-M3 SUN2000-40KTL-M3

Efficiency
Max. Efficiency 98.7%
European Efficiency 98.4%

Input
Max. Input Voltage 1 1,100 V
Max. Current per MPPT 27 A (per MPPT) / 20 A (per Input)
Max. Short Circuit Current per MPPT 40 A
Start Voltage 200 V
MPPT Operating Voltage Range 2 200 V ~ 1000 V
Rated Input Voltage 600 V
Number of Inputs 8
Number of MPP Trackers 4

Output
Rated AC Active Power 30,000 W 36,000 W 40,000 W
Max. AC Apparent Power 33,000 VA 3 40,000 VA 44,000 VA
Rated Output Voltage 230 Vac / 400 Vac / 480 Vac, 3W/N+PE
Rated AC Grid Frequency 50 Hz / 60 Hz
Rated Output Current 43.3 A 52.0 A 57.8 A
Max. Output Current 47.9 A 58.0 A 63.8 A
Adjustable Power Factor Range 0.8 LG ... 0.8 LD
Max. Total Harmonic Distortion < 3%

Protection
Input-side Disconnection Device Yes
Anti-islanding Protection Yes
AC Overcurrent Protection Yes
DC Reverse-polarity Protection Yes
PV-array String Fault Monitoring Yes
DC Surge Arrester Yes
AC Surge Arrester Yes
DC Insulation Resistance Detection Yes
Residual Current Monitoring Unit Yes
Arc Fault Protection Yes
Ripple Receiver Control Yes
Integrated PID Recovery 3 Yes

Communication
Display LED Indicators, Integrated WLAN + FusionSolar APP
RS485 Yes
WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Smart Dongle
4G / 3G / 2G via Smart Dongle-4G (Optional)

General Data
Dimensions (W x H x D) 640 x 530 x 270 mm (25.2 x 20.9 x 10.6 inch)
Weight (with mounting plate) 43 kg (94.8 lb)
Operating Temperature Range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Cooling Method Natural Convection
Max. Operating Altitude 4,000 m (13,123 ft.) (Derating above 2000 m)
Relative Humidity 0% RH ~ 100% RH
DC Connector Amphenol Helios H4
AC Connector Waterproof Connector + OT/DT Terminal
Protection Degree IP 66
Topology Transformerless
Nightime Power Consumption ≤ 5.5W

Optimizer Compatibility
DC MBUS Compatible Optimizer SUN2000-600W-P,MERC-1100W/1300W-P

Standard Compliance (more available upon request)

Safety EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD
Grid Connection Standards 1699,
P.O. 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7,
NRS 097-2-1, AS/NZS 4777.2, DEWA
1. The maximuminput voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
2. Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
3. SUN2000-30~40KTL-M3 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly)

SOLAR.HUAWEI.COM
SUN2000-50KTL-M3
Smart PV Controller

Higher Yields Active Safety Flexible Communication

Up to 30% More Energy AI Powered

2 WLAN, Fast Ethernet, 4G
with Optimizer Active Arcing Protection Communication Supported

Efficiency [%] Efficiency Curve Circuit Diagram

99%

98%

97%

96%

95%
800V
94% 600V
530V
93%
0% 20% 40% 60% 80% 100%
Load [%]
SUN2000-50KTL-M3

SOLAR.HUAWEI.COM
 SUN2000-50KTL-M3
Technical Specification
Technical Specification SUN2000-50KTL-M3

Efficiency
Max. Efficiency 98.5%
European Efficiency 98.0%

Input
Max. Input Voltage 1 1,100 V
Max. Current per MPPT 30 A
Max. Current per Input 20 A
Max. Short Circuit Current per MPPT 40 A
Start Voltage 200 V
MPPT Operating Voltage Range 2 200 V ~ 1,000 V
Rated Input Voltage 600 V
Number of Inputs 8
Number of MPP Trackers 4

Output
Rated AC Active Power 50,000 W
Max. AC Apparent Power 55,000 VA
Max. AC Active Power (cosφ=1) 55,000 W
Rated Output Voltage 400 Vac / 480 Vac, 3W+(N) + PE
Rated AC Grid Frequency 50 Hz / 60 Hz
Rated Output Current 72.2 A @ 400Vac, 60.1 A @ 480Vac
Max. Output Current 79.8 A @ 400Vac, 66.5 A @ 480Vac
Adjustable Power Factor Range 0.8 LG ... 0.8 LD
Max. Total Harmonic Distortion <3%

Protection
Input-side Disconnection Device Yes
Anti-islanding Protection Yes
AC Overcurrent Protection Yes
DC Reverse-polarity Protection Yes
PV-array String Fault Monitoring Yes
DC Surge Arrester Type II
AC Surge Arrester Type II
DC Insulation Resistance Detection Yes
Residual Current Monitoring Unit Yes
Arc Fault Protection Yes
Ripple Receiver Control Yes
Integrated PID Recovery 3 Yes

Communication
Display LED Indicators, Bluetooth + APP
RS485 Yes
WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Smart Dongle
4G / 3G / 2G via Smart Dongle-4G (Optional)
Monitoring BUS (MBUS) Yes (Isolation Transformer required)

Optimizer Compatibility
DC MBUS Compatible Optimizer4 MERC-1100/1300W-P

General Data
Dimensions (W x H x D) 640 x 530 x 270 mm (25.2 x 20.9 x 10.6 inch)
Weight (with mounting plate) 49 kg (108.1 lb)
Operating Temperature Range -25°C ~ 60°C (-13°F ~ 140°F)
Cooling Method Smart Air Cooling
Max. Operating Altitude 4,000 m (13,123 ft.)
Relative Humidity 0% RH ~ 100% RH
DC Connector Amphenol HH4
AC Connector Waterproof Connector + OT/DT Terminal
Protection Degree IP 66
Topology Transformerless
Nighttime Power Consumption ≤ 5.5W

Standard Compliance (more available upon request)

Safety EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699,
Grid Connection Standards P.O. 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7,
NRS 097-2-1, DEWA
1. The maximuminput voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
2. Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
3. SUN2000-30~50KTL-M3 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly), N-type (nPERT, HIT)

SOLAR.HUAWEI.COM
SUN2000-100KTL-M2
Smart PV Controller

10 98.6% (@400V) String-level Smart I-V Curve Diagnosis

MPP Trackers Max. Efficiency Management Supported

MBUS Support AFCI & Surge Arresters for IP66

Smart String Level
Supported Disconnector DC & AC Protection

Efficiency Curve Circuit Diagram

+
+ MPPT1
-
SUN2000-100KTL-M2 @400 V -
+ L1
Efficiency [%] +
1
MPPT2
Output
Filter
EMI
Filter
L2
L3
-
- N

99.0% +
+ MPPT3
DC/AC
Inverter
Output
Relay
SPD PE

98.5% -
DC Switch 1
SPD

98.0% +
-
MPPT4

97.5% +
+
1
MPPT5
-

97.0% -

+
EMI
Filter MPPT6
96.5%
+
-
- SPD
DC Switch 2

96.0% +
+ MPPT7
-
95.5% -
+
+
MPPT8
95.0% -
-

0% 20% 40% 60% 80% 100% +

+
MPPT9
-
-

540V 600V 800V +

+ MPPT10
-
- SPD
Load [%] Current
Sensor
DC Switch 3
SUN2000-100KTL-M2

SOLAR.HUAWEI.COM
 SUN2000-100KTL-M2
Technical Specification

Technical Specification SUN2000-100KTL-M2

Efficiency
Max. efficiency 98.6% @ 400 V, 98.8% @ 480 V
European efficiency 98.4% @ 400 V, 98.6% @ 480 V

Input
Max. Input Voltage 1 1,100 V
Max. Current per MPPT 30 A
Max. Current per Input 3 20 A
Max. Short Circuit Current per MPPT 40 A
Start Voltage 200 V
MPPT Operating Voltage Range 2 200 V ~ 1,000 V
Nominal Input Voltage 600 V @ 400 Vac, 720 V @ 480 Vac
Number of MPP trackers 10
Max. input number per MPP tracker 2

Output
Nominal AC Active Power 100,000 W
Max. AC Apparent Power 110,000 VA
Max. AC Active Power (cosφ=1) 110,000 W
Nominal Output Voltage 380 V/ 400 V/ 480 V, 3W+(N)+PE
Rated AC Grid Frequency 50 Hz / 60 Hz
Nominal Output Current 144.4 A @ 400 V, 120.3 A @ 480 V
Max. Output Current 160.4 A @ 400 V, 133.7 A @ 480 V
Adjustable Power Factor Range 0.8 leading... 0.8 lagging
Max. Total Harmonic Distortion ＜3%

Protection
Input-side Disconnection Device Yes
Anti-islanding Protection Yes
AC Overcurrent Protection Yes
DC Reverse-polarity Protection Yes
PV-array String Fault Monitoring Yes
DC Surge Arrester Type II
AC Surge Arrester Type II
DC Insulation Resistance Detection Yes
Residual Current Monitoring Unit Yes
Arc Fault Protection Yes
Smart String Level Disconnector Yes

Communication
Display LED indicators; WLAN adaptor + FusionSolar APP
RS485 Yes
USB Yes
Smart Dongle-4G Smart Dongle – 4G / WLAN (Optional)
Monitoring BUS (MBUS) Yes (isolation transformer required)

General Data
Dimensions (W x H x D) 1,035 x 700 x 365 mm
Weight (with mounting plate) 93 kg
Operating Temperature Range -25°C ~ 60°C
Cooling Method Smart Air Cooling
Max. Operating Altitude 4,000 m (13,123 ft.)
Relative Humidity 0 ~ 100%
DC Connector Amphenol Helios H4
AC Connector Waterproof Connector + OT/DT Terminal
Protection Degree IP66
Topology Transformerless
Nighttime Power Consumption < 3.5 W

Standard Compliance (more available upon request)

Certificate EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 61727, IEC 60068, IEC 61683
Grid Connection Standards VDE-AR-N4105, EN 50549-1, EN 50549-2, RD 661, RD 1699, C10/11
*1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*2 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*3 Single-string access.
SOLAR.HUAWEI.COM
SUN2000-115KTL-M2
Smart PV Controller

10 98.6% (@400V) String-level Smart I-V Curve Diagnosis

MPP Trackers Max. Efficiency Management Supported

MBUS Support Surge Arresters for IP66

Supported Smart String Level DC & AC Protection
Disconnector

Efficiency Curve Circuit Diagram

+
+ MPPT1
SUN2000-115KTL-M2 @400 V -
Efficiency [%] -
L1
+
+
1 Output EMI L2
99.0% -
-
MPPT2
Filter Filter L3
N
+ DC/AC Output SPD PE
98.5% +
-
MPPT3 Inverter Relay
- SPD
DC Switch 1
98.0% +
+ MPPT4
-

97.5% -
+ 1
+ MPPT5
-

97.0% -

+
EMI
+
Filter MPPT6

96.5% -
-
DC Switch 2
SPD

96.0% +
-
MPPT7

95.5%
+
+
MPPT8
-
-

95.0% +
+
MPPT9

0% 20% 40% 60% 80% 100% -

-

+
+ MPPT10
-
540V 600V 800V - SPD
Current
DC Switch 3
Load [%] Sensor
SUN2000-115KTL-M2

SOLAR.HUAWEI.COM
 SUN2000-115KTL-M2
Technical Specification

Technical Specification SUN2000-115KTL-M2

Efficiency
Max. efficiency 98.6% @400 V, 98.8% @480 V
European efficiency 98.4% @400 V, 98.6% @480 V

Input
Max. Input Voltage 1 1,100 V
Max. Current per MPPT 30 A
Max. Current per Input 20 A
Max. Short Circuit Current per MPPT 40 A
Start Voltage 200 V
MPPT Operating Voltage Range 2 200 V ~ 1,000 V
Nominal Input Voltage 600 V @400 Vac, 720 V @480 Vac
Number of MPP trackers 10
Max. input number per MPP tracker 2

Output
Nominal AC Active Power 115,000 W
Max. AC Apparent Power 125,000 VA
Max. AC Active Power (cosφ=1) 125,000 W
Nominal Output Voltage 400 V / 480 V, 3W+(N)+PE
Rated AC Grid Frequency 50 Hz / 60 Hz

Nominal Output Current 166.0 A @400 V, 138.4 A @480 V

Max. Output Current 182.3 A @400 V, 151.9 A @480 V
Adjustable Power Factor Range 0.8 leading... 0.8 lagging
Max. Total Harmonic Distortion ＜3%

Protection
Input-side Disconnection Device Yes
Anti-islanding Protection Yes
AC Overcurrent Protection Yes
DC Reverse-polarity Protection Yes
PV-array String Fault Monitoring Yes
DC Surge Arrester Type II
AC Surge Arrester Type II
DC Insulation Resistance Detection Yes
Residual Current Monitoring Unit Yes
Smart String Level Disconnector Yes

Communication
Display LED indicators; WLAN adaptor + FusionSolar APP
RS485 Yes
USB Yes
Smart Dongle-4G 4G / 3G / 2G via Smart Dongle – 4G (Optional)
Monitoring BUS (MBUS) Yes (isolation transformer required)

General Data
Dimensions (W x H x D) 1,035 x 700 x 365 mm
Weight (with mounting plate) 93 kg
Operating Temperature Range -25 ℃ ~ 60 ℃
Cooling Method Smart Air Cooling
Max. Operating Altitude 4,000 m (13,123 ft.)
Relative Humidity 0 ~ 100%
DC Connector Amphenol Helios H4
AC Connector Waterproof Connector + OT/DT Terminal
Protection Degree IP66
Topology Transformerless
Nighttime Power Consumption < 3.5 W

Standard Compliance (more available upon request)

Certificate EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 61727, IEC 60068, IEC 61683
Grid Connection Standards VDE-AR-N4105, VDE 4110, EN 50549-1, EN 50549-2, RD 661, RD 1699, C10/11
*1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*2 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
SOLAR.HUAWEI.COM
LUNA2000-200KWH-2H1
Smart String ESS

More Energy Simple O&M Safe & Reliable

Energy Storage System Parameters

Battery Configuration 12S1P

Maximum Battery Capacity of the Energy Storage System 193.5 kWh

Rated Power 100 kW

Dimensions (W x H x D), including DC/DC and PCS 2570mm×2135mm×1200mm

Dimensions (W x H x D) 1810mm×2135mm×1200mm

Weight (including the battery module) ≤2950kg

Weight (without the battery module) ≤1070kg

Operating Temperature Range -30 °C ~ 55 °C

Storage Temperature Range -40 °C ~ 60 °C

Operating Humidity Range 0 ~ 100% (non-condensing)

Maximum Operating Altitude 4,000 m

Installation Environment Requirement Outdoor installation

Battery Temperature Control Mode Industrial-grade air conditioner

Fire Suppression of Energy Storage System YES

Auxiliary Power Supply 220Vac，<=4.2kVA

Communication Port Ethernet / SFP

Communication Protocol Modbus TCP

Protection Degree IP55

EMC Protection Rating ClassA

DC Lightning Protection Type II

Standards

Environment RoHS6

Certification Standards GBT 36276-2018；IEC62619; UL9540A;UN38.3

SOLAR.HUAWEI.COM
Battery Pack & Smart Rack Controller
Smart String ESS

Battery Pack

General

Cell Material LFP

Nominal Capacity 16.13 kWh

Supported Charge & Discharge Rate ≤ 0.5 C

Weight ≤ 140 kg

Dimensions (W x H x D) 442 x 308 x 660 mm

Smart Rack Controller

Efficiency
Max. Efficiency ≥ 98.5.0%

Battery Side
Rated Voltage 691.2@280Ah

Operating Voltage Range 40 V ~ 1,050 V

Min. Start Voltage 350 V

Bus Side
Max. DC Voltage 1,100 V

Rated Voltage 665 V

Rated Current 76.3 A

General
Dimensions (W x H x D) 600 x 270 x 820 mm

Weight ≤ 90 kg

Cooling Method Smart Air Cooling

Protection Degree IP66

SOLAR.HUAWEI.COM
LUNA2000-100KTL-M1
Smart PCS

Max. Efficiency 98.4% Modular Design IP66 Protection

Surge Arresters for Ethernet Smart Grid

DC & AC Communication Algorithm

Efficiency Curve Circuit Diagram

Efficiency [%]

99
98.5
L1 L2
98 +
BUS+ = AC
EMI
L1
L2
DC Soft Filter L3
EMI Start
97.5 Filter Circuit
SPD
-
BUS- ~ C
Relay Relay Residual
97 SPD Current
Detection

Inverter Bridge Line Filter

96.5
96
95.5
0.00% 20.00% 40.00% 60.00% 80.00% 100.00%

570 650 750

LUNA2000-100KTL-M1
Load [%]

SOLAR.HUAWEI.COM
 LUNA2000-100KTL-M1
Technical Specifications
Efficiency
Max. Efficiency 98.4%

DC Side
Rated DC Voltage 645 V
Max. DC Voltage 1,100 V
Operating DC Voltage Range 570 V ~ 1100 V
Max. DC Current 215.8 A
Max. Number of Inputs 1

AC Side
Rated AC Active Power 100,000 W @40°C
Rated AC Voltage 380 Vac / 400 Vac / 440Vac

Rated AC Grid Frequency 50 Hz / 60 Hz

Max. AC Current 173.2 A

Adjustable Power Factor Range -1 ... +1
Max. Total Harmonic Distortion ＜3%

Protection
Anti-islanding Protection Yes
AC Overcurrent Protection Yes
DC Reverse-polarity Protection Yes
Insulation Resistance Detection Yes
Earth Fault Protection Yes
Residual Current Protection Yes
DC Surge Protection Type II
AC Surge Protection Type II

Communication
Display LED Indicators, WLAN + APP
Networking Mode Ethernet， CAN

General
Dimensions (W x H x D) 875 x 820 x 365 mm
Weight < 95 kg
Operating Temperature Range -25°C ~ 60°C ( Derating above 40°C )
Cooling Method Smart Air Cooling
Max. Operating Altitude without Derating 4,000 m
Relative Humidity 0 ~ 100%
DC Connector OT/DT Terminal
AC Connector OT/DT Terminal
Protection Degree IP66
Topology Transformerless

SOLAR.HUAWEI.COM
MERC-1100/1300W-P
Smart Module Controller

Long String Design Up to 20 A Input Current < 5s

Better for C&I Scenarios Fit All Type Module Module Auto-Mapping

Temperature Detection 1V Safe Voltage Shutdown Arc Fault Pinpoint Positioning

Safety Enhanced Easier for Detection Along PV Cable

SOLAR.HUAWEI.COM
 MERC-1100/1300W-P
Smart Module Controller
Technical Specification MERC-1100W-P MERC-1300W-P

Input
Rated Input DC Power1 1100 W 1300 W
Max. input voltage 125 V
MPPT operating voltage range 12.5 – 105 V
Max. short-circuit current (Isc) 20 A
Max. efficiency 99.5 %
Weighted efficiency 99.0 %
Overvoltage category II

Output
Max. output voltage 80 V
Max. output current 22 A
Output bypass2 Yes
Shutdown output voltage per optimizer3 1V

Standards Compliance
Safety IEC62109-1 (class II safety)
RoHS Yes

General Data
Dimension (W x H x D) 149 mm x 104 mm x 49 mm (5.9 in. x 4.1 in. x 2.0 in.)
Weight (including cables) 1.05 kg (2.2 lb.)
Installation part (optional) PV Module Frame Plate, T-shaped Bolt
Input connector MC4
Input wire length 0.1 m (short input cable version)4
Output connector MC4
Output wire length 0.1 m (+), 5.1 m (–) (short input cable version)4
Operating temperature/humidity range –40°C to +85°C 5/ 0%–100% RH
Degree of protection IP68
SUN2000-12/15/17/20KTL-M2
SUN2000-30/36/40KTL-M3
Compatible Inverter SUN2000-12/15/17/20/25KTL-M5
SUN2000-50KTL-M3

String Configuration (Full Optimizer Configuration)

* MERC-1100/1300W-P support full optimizer configuration only
SUN2000-12-20KTL-M2 SUN2000-12-25KTL-M5 SUN2000-20-40KTL-M3 SUN2000-50KTL-M3

Minimum optimizers per string 6 6 6 6

Maximum optimizers per string 25 25 25 20
Recommend strings per inverter 12KTL 15-20KTL 12KTL 15-25KTL 30/36KTL 40KTL
* Only one string can be connected to each MPPT.
* The DC/AC ratio is 1.0 to 1.3 for this recommended configuration. For other ratios, refer
4
to the user manual. 1 2 1 2 3 4

Maximum DC power per string

* It is recommended that strings have equal capacity. The capacity difference between 20,000 W 20,000 W 20,000 W 20,000 W
strings should ≤ 2 kW. Otherwise, the energy yield might be adversely affected.

Short Input Cable Version

*1 The rated power of modules under standard test conditions (STC) shall not exceed the rated DC input power of optimizers. The module power can be 5% higher than the rated optimizer power.
*2 Failed optimizers will be bypassed so that other optimizers and inverters will not be affected.
*3 When the optimizer output is an open circuit or the inverter connected to the optimizer is shut down, the default optimizer output is 1 V DC voltage.
*4 For the short input cable version (Input cable 0.1m (+/-), output cable 0.1m(+), 5.1m(-)), ensure that the PV module cables are long enough to connect to the optimizers. For split junction box module with a short cable, the long-
input cable version of optimizer is available (input cables: 1.3 m (+/–); positive output cable: 0.1 m; negative output cable: 2.9 m) on request.
*5 When the operating temperature of the optimizer is 70°C to 85°C, the optimizer may shut down for overtemperature protection and report an overtemperature alarm. After the operating temperature drops to 70°C or below, the
optimizer automatically recovers with no risk of damage.
*6 The SUN2000-450/600W-P cannot be mixed with the MERC-1100/1300W-P under the same inverter.
*7 The temperature detection function is only available on the short output cable (0.1 m).
*8 It is allowed to connect single PV module to the MERC-1100/1300W-P.
SOLAR.HUAWEI.COM
SUN2000-600W-P
Smart Module Controller

One-Fits-All Optimizer Arc Fault Pinpoint Positioning

Easier Business <5s Module Auto-Mapping
Along PV Cable

Technical Specification SUN2000-600W-P

Input
Rated Input DC Power 1 600 W
Absolute maximum input voltage 80 V
MPPT operating voltage range 10 - 80 V
Maximum Short Circuit Current (Isc) 14.5 A
Max. efficiency 99.5 %
Weighted efficiency 99.0 %
Overvoltage category II

Output
Max. output voltage 80 V
Max. output current 15 A
Output bypass 2 Yes
Shutdown output voltage per optimizer 3 0V
Shutdown output impedance per optimizer 1k ohm ± 10 %

Communication
Communication Method MBUS

Standard Compliance
Safety IEC62109-1 (class II safety)
RoHS Yes

General Data
Dimension (W x H x D) 75 x 140 x 28 mm (3.0 x 5.5 x 1.1 inch)
Weight (including cables) 0.6 kg (1.3 lb.)
Installation part (optional) Frame Mounting Bracket / T-shaped Bolt 4
Input connector MC4
Input wire length 0.15m (0.49 ft.)
Output connector MC4
Output wire length 1.3 m (4.3 ft.) 5
Operating temperature / humidity range -40 ℃～85 ℃ 5 / 0 %RH～100 %RH
Degree of protection IP68
Compatible product SUN2000-2/3/4/5/6KTL-L1, SUN2000-5/8/10KTL-M1,
SUN2000-12/15/17/20KTL-M2,SUN2000-12-25KTL-M5, SUN2000-30/36/40KTL-M3

Long String Design (Full Optimizer) SUN2000-2-6KTL-L1 SUN2000-3-10KTL-M1 SUN2000-12-25KTL-M5 SUN2000-30-40KTL-M3

Minimum optimizer number per string 6 4 6 6 6

Maximum optimizer number per string 25 35 35 25
Maximum DC power per string 6,000 W 10,000 W 12,000 W 12,000 W
*1 In the STC environment, The rated power of the module shall not exceed 1.05 times of the optimizer rated input power.
*2 Power optimizer is bypassed in the string connected to an operating inverter when it fails to work
*3 Power optimizer output 0Vdc when disconnecting to the inverter or inverter is shutdown.
*4 Allow PV module frame installation / extruded aluminum profile installation
*5 Fits PV module in landscape and portrait installation.
*6. Require standard 60 cells module to meet the inverter minimum startup voltage
*7 Full power capability refers to online smart design tool. SOLAR.HUAWEI.COM
 Smart Dongle-WLAN-FE

Smart Simple Reliable

WLAN & Fast Ethernet (FE) communication Plug & Play IP65
Support 3rd-party monitoring system 1 Support max. 10 devices Support auto reconnection

Technical Specification SDongleA-05(AP+STA)

General Data
Max. Devices Supported 10
Max. Inverters Supported 10
Connection interface USB
Ethernet Interface 10/100M Ethernet
Installation Plug-and-play
Indicator LED Indicator
Dimensions (W * H * D) 146 x 48 x 33 mm (5.1 x 1.9 x 1.3 inch)
Weight 90 g (0.2 lb.)
Degree of protection IP65
Power consumption (typical) 2.5 W
Operation Mode AP + STA
Encryption Mechanism: WPA/WPA2
Encryption Algorithm
Encryption: TKIP/CCMP/AES

Wireless Parameter
Supported standards & frequencies 802.11b/g/n (2.412G—2.484G)

Environment
Operating temperature range -30 ℃ to +65 ℃ (-22 ℉ to 149 ℉)
Relative humidity range 5 - 95% RH
Storage temperature range -40 ℃ to +70 ℃ (-40 ℉ to 158 ℉)
Max. operating altitude 4,000 m (13,123 ft.)

Standard Compliance (more available upon request)

Certificate SRRC, CE, RCM

Inverter Compatibility
SUN2000-2/3/4/5/6KTL-L1
SUN2000-5/8/10KTL-M1
SUN2000-12/15/17/20KTL-M2
Inverter Model
SUN2000-12-25KTL-M5
SUN2000-30/36/40/50KTL-M3
SUN2000-100/115KTL-M2

1: 3rd-party management system shall match the communicationprotocol with Huawei Smart Dongle.

SOLAR.HUAWEI.COM
Smart Dongle-4G

Smart Simple Reliable

4G communication 1
Plug & Play IP65
Support 3rd-party monitoring system 2 WLAN-AP for local deploying 3 Support auto reconnection

Technical Specification SDongleB-06-EU

General Data
Max. Devices Supported 10
Max. Inverters Supported 10
Connection interface USB
Installation Plug-and-play
Indicator LED Indicator
Dimensions (W * H * D) 162*48*28mm
Degree of protection IP65
Power consumption (typical) 3.5W

Wireless Parameter
Sim card type mini-sim (15 mm*25 mm)
LTE-FDD：B1/B3/B7/B8/B20/B28
Supported standards & frequencies 4 LTE-TDD：B38/B40/B41
GSM：850/900/1800/1900MHz
Wifi Operation Mode AP
Supported standards & frequencies 802.11b/g/n (2.412G—2.484G)

Environment
Operating temperature range -30 ℃ to +65 ℃ (-22 ℉ to 149 ℉)
Relative humidity range 5 - 95% RH
Storage temperature range -40 ℃ to +70 ℃ (-40 ℉ to 158 ℉)
Max. operating altitude 4,000 m (13, 123 ft.)

Standard Compliance (more available upon request)

Certificate CE

Inverter Compatibility
SUN2000-2/3/4/5/6KTL-L1, SUN2000-5/8/10KTL-M1, SUN2000-12-25KTL-M5,
Inverter model SUN2000-12/15/17/20KTL-M2, SUN2000-30/40/50TL-M3, SUN2000-60KTL-M0
SUN2000-100KTL-M1, SUN2000-100KTL-M1 Pro, SUN2000-100/115KTL-M2

1: To ensure stable data transmission, Huawei suggests 4G dongle to be installed in areas with stable mobile signal (2G signal ≥4 bars, 3G/4G signal ≥3 bars).
2: 3rd-party management system shall match the communicationprotocol with Huawei Smart Dongle.
3: When all inverters support WLAN hotspot, hotspot of Dongle will be disabled by default.
4: For recommended carriers list and details on supported frequencies, please contact local distributors.

SOLAR.HUAWEI.COM
Smartlogger3000A

Smart Simple Reliable

Smart zero export control design Easy to install on site Safety by lightning protection module

Technical Specification SmartLogger3000A00GL 1

Device Management
Max. Number of Connected Devices 2 80

Communication Interface
WAN WAN x 1, 10 / 100 / 1000 Mbps
LAN LAN x 1, 10 / 100 / 1000 Mbps
RS485 COM x 3, 1200 / 2400 / 4800 / 9600 / 19200 / 115200 bps, 1000 m
Digital / Analog Input / Output DI x 4, DO x 2, AI x 4
Active DO 12V, 100mA (connection with relay, sensor)

Communication Protocol
Ethernet Modbus-TCP, IEC 60870-5-104
RS485 Modbus-RTU, IEC 60870-5-103 (standard), DL / T645

Interaction
LED LED Indicator x 3 – RUN, ALM, 4G
WEB Embedded Web
USB USB 2.0 x 1
APP Communication by WLAN for Commissioning

Environment
Operating Temperature Range -40°C ~ 60°C (-40°F ~ 140°F)
Storage Temperature -40°C ~ 70°C (-40°F ~ 158°F)
Relative Humidity (Non-condensing) 5% ~ 95%
Max. Operating Altitude 4,000 m (13,123 ft.)

Electrical
AC Power Supply 100 V～240 V, 50 Hz / 60 Hz
DC Power Supply 12 V / 24 V
Power Consumption Typical 8 W, Max. 15 W

Mechanical
Dimensions (W x H x D) 225 x 160 x 44 mm (8.9 x 6.3 x 1.7 inch, without mounting ears and antenna)
Weight 2 kg (4.4 lb.)
Protection Degree IP20
Installation Options Wall Mounting, DIN Rail Mounting, Tabletop Mounting

*1: 4G is not available in this model.

*2: Devices including Inverter, Smart Power Meter, EMIs,..etc..

SOLAR.HUAWEI.COM
Smartlogger3000B

Without SmartModule1000A With SmartModule1000A

Smart Simple Reliable

Connecting up to 150 inverters, Deployment wizard allowed, including Safety improvement
One-click commissioning parameters configuration, devices connection by lightning protection module

Technical Specifications SmartLogger3000B SmartLogger3000B

with SmartModule1000A

Device Management
Max. Number of Manageable Devices 200
Max. Number of Manageable Inverters 150
Communication Interface
WAN WAN x 1, 10 / 100 / 1,000 Mbps
LAN LAN x 1, 10 / 100 / 1,000 Mbps LAN x 3, 10 / 100 / 1,000 Mbps
Optical Ethernet SFP x 2, 100 / 1000 Mbps
MBUS MBUS x 1, 115.2 kbps, Compatible with PLC
COM x 3, 1,200 / 2,400 / 4,800 / 9,600 / COM x 6, 1,200 / 2,400 / 4,800 / 9,600 /
RS485 19,200 / 115,200 bps 19,200 / 115,200 bps
Digital / Analog Input / Output DI x 4, DO x 2, AI x 4 DI x 8, DO x 2, AI x 7
PT100 / PT1000 0 2
Active DO 12 V, 100 mA (connection with relay, sensor)
Communication Protocol
Ethernet Modbus-TCP, IEC 60870-5-104
RS485 Modbus-RTU, IEC 60870-5-103 (standard), DL / T645
Interaction
LED Indicator x 5 –
LED LED Indicator x 3 – RUN, ALM, 4G RUN, ALM, 4G (Smartlogger3000B)
& RUN, ALM (SmartModule1000A)
WEB Embedded Web
USB USB 2.0 x 1
APP Communication by WLAN for commissioning
Environment
Operating Temperature Range -40°C ~ 60°C (-40°F ~ 140°F)
Storage Temperature Range -40°C ~ 70°C (-40°F ~ 158°F)
Relative Humidity (Non-condensing) 5% ~ 95%
Max. Operating Altitude 4,000 m (13,123 ft.)
Electrical
Power Adaptor AC input: 100 V～240 V, 50 Hz / 60 Hz; DC output: 12 V, 2 A
DC Power Supply 24 V, 0.8 A
Power Consumption Typical 9 W, Max. 15 W Typical 10 W, Max. 18 W
Mechanical
Dimensions
(W x H x D, without mounting ears) 225 x 160 x 44 mm (8.9 x 6.3 x 1.7 inch) 350 x 160 x 44 mm (13.8 x 6.3 x 1.7 inch)
Weight 2 kg (4.4 lb.) 3 kg (6.6 lb.)
Protection Degree IP20
Wall Mounting, DIN Rail Mounting, Tabletop Mounting
Installation Options Integrated Inside SmartACU2000D

SOLAR.HUAWEI.COM
Smart Power Sensor

Accurate Simple & Easy Energy Efficient

Class 1 measurement accuracy LCD display, easy to set and check Overall power consumption ≤ 1 W

Technical Specification DTSU666-H 250A/50mA

General Data
100 x 72 x 65.5 mm
Dimension (H x W x D)
(3.9 x 2.8 x 2.6 inch)
Mounting type DIN35 Rail
Weight (including cables) 1.5 kg (3.3 lb)

Power Supply
Power grid type 3P3W/3P4W
Input voltage (phase voltage) 176 Vac ~ 288 Vac
Power consumption ≤1W

Measurement Range
Line voltage 304 Vac ~ 499 Vac
Phase voltage 176 Vac ~ 288 Vac
Current 0 ~ 250 A

Measurement Accuracy
Current / Voltage ±0.5 %
Power / Energy ±1 %
Frequency ±0.01 Hz

Communication
Interface RS485
Baud rate 9,600 bps
Communication protocol Modbus-RTU

Environment
Operating temperature range -25 ℃ ~ 60 ℃
Storage temperature range -40 ℃ ~ 70 ℃
Operating humidity 5 %RH ~ 95 %RH (non-condensing)

Others
RS485 Cable (10 m / 33 ft.)
3 CT 250A / 50mA
(5m / 16.4 ft.)
Accessories

SOLAR.HUAWEI.COM
Smart Power Sensor

Accurate Simple & Easy Energy Efficient

Class 1 measurement accuracy LCD display, easy to set and check Overall power consumption ≤ 1.5 W

Technical Specification DTSU666-HW/YDS60-80

General Data
100 x 72 x 80 mm
Dimension (H x W x D)
(3.9 x 2.8 x 3.1 inch)
Mounting type DIN35 Rail
Weight (including cables) < 0.5 kg

Power Supply
Power grid type 3P4W/3P3W
Input voltage (line voltage) 90 ~ 500 Vac
Power consumption ≤ 1.5 W

Measurement Range
Line voltage 90 Vac ~ 1000 Vac (> 500 with external PT 1)
Phase voltage 52~577 Vac
Current 0 ~ 80 A(>80 with external CTs 2)

Measurement Accuracy
Voltage / Current ±0.5 %
Power / Energy ±1 %
Frequency ±0.01 Hz

Communication
Interface RS485
Baud rate 4800/9600/19200/115200 (Default 9600bps)
Communication protocol Modbus-RTU

Environment
Operating temperature range -25 ℃ ~ 60 ℃
Storage temperature range -40 ℃ ~ 70 ℃
Operating humidity 5 %RH ~ 95 %RH (non-condensing)

Others
Accessories RS485 Cable (10 m / 33 ft.)

*1 2nd voltage of CT should be 100V. And accuracy should be better than Class 0.5
*2 2nd current of CT should be 1A or 5A. And accuracy should be better than Class 0.5

SOLAR.HUAWEI.COM
FusionSolar Smart PV Management System

Better experience Energy visualization Smart O&M

⚫ KPI Dashboard, centralized management of ⚫ One-screen mgmt. of site, personnel, status

⚫ One APP for all access procedure
multiple plants
⚫ Auto-definition of local components ⚫ One-click ticket dispatching & site navigation
⚫ Module-level monitoring
⚫ Online Smart I-V Curve Diagnosis, 15mins
⚫ Module auto-mapping within 5s ⚫ Report subscription and real-time alarm push required for a 100MW plant diagnosis

Networking
APP PC

Internet

FusionSolar Smart PV Management System

Internet Internet

Router Base station

WLAN Fast Ethernet 4G/3G/2G

4G/3G/2G

RS485 RS485

Smart string inverter Smart string inverter SmartLogger Smart string inverter

SOLAR.HUAWEI.COM
FusionSolar Smart PV Management System

Category Function Web APP

PV Plants List
Homepage
Add Plant

Plant Report
Report Inverter Report
Management
Battery Report

Device Details
Device Remote Parameter Setting
Management
Remote Optimizer Search

Real-time Status

Alarm Management
Intelligent O&M
Task Management

Smart IV-Curve Diagnose

KPI Dashboard KPI Dashboard

Energy Flow

Energy Management
Homepage of
Single Plant Plant Layout

Kiosk Mode

Plant Management
System Setting
Company Management

Demo Demo Site

SOLAR.HUAWEI.COM
Smart I-V Curve Diagnosis

Smart I-V Curve Diagnosis is able to carry out online I-V curve analysis on entire strings with
advanced diagnosis algorithm. The scanning would help to find out and identify the strings with
low performance or faults, which would help to achieve proactive maintenance, higher O&M
efficiency and lower operation cost.

Smart
⚫ Support plant-level, array-level and inverter-level analysis and
diagnosis
⚫ Automatically identify different failure types and provide recovery
suggestion

Efficient
⚫ One-click scanning without onsite experts or equipment
⚫ Online I-V curve scanning on entire strings of 5 MW plant within 5min
⚫ Automatic report generation of 5 MW plant within 15min

Networking

One Click Scanning Smart I-V Curve Diagnosis Report

Ethernet

FusionSolar
SmartLogger
Smart PV Management system

WLAN 3G/4G RS485

Weather Station
(optional)

SOLAR.HUAWEI.COM
Smart I-V Curve Diagnosis

Technical Specifications Smart I-V Curve Diagnosis

SUN2000-2/3/4/5/6KTL-L1, SUN2000-5-10KTL-M1, SUN2000-12-20KTL-M2,

Smart PV Inverter* SUN2000-12-25KTL-M5,SUN2000-30/36/40/50KTL-M3, SUN2000-60KTL-M0,
SUN2000-100KTL-M1, SUN2000-100KTL-M1 Pro, SUN2000-100/115KTL-M2

Communication SmartLogger3000A, Smart Dongle-WLAN-FE/4G

Management System FusionSolar Smart PV Management System, NetEco1000s

Scanning Time ＜1s (1 string)

Sampling Points per I-V Curve 128

Certification TUV
* I-V curve diagnosis is not supported when inverter is connected with power optimizer.

String-level Management Smart I-V Curve Diagnosis

Real time monitoring Fault Analysis

String I-V Curve Comparison

9
8
7
Current [A]

6
5
4
3 Normal Curve
2
1
Abnormal Curve with shading on Modules
0
200 300 400
0 100 500 600 700 800
Voltage [V]
9
8
7
Current [A]

6
5
4
3 Normal Curve
2
Abnormal Curve with String Current Mismatch
1
0
0 100 200 300 400 500 600 700 800
Voltage [V]

SOLAR.HUAWEI.COM
FUSIONSOLAR

CASE REFERENCE

Location Capacity System

Ho Chi Minh City 400 kW • SUN2000-40KTL-M3

Location Capacity System

Binh Phuoc Province 3 MW • SUN2000-100KTL-M1

Location Capacity System

Dong Nai Province 6 MW • SUN2000-60KTL-M0

SOLAR.HUAWEI.COM
FUSIONSOLAR

CASE REFERENCE

Location Capacity System

Zhejiang Province 200kWh • ESS LUNA2000-200KWH-2H0

Location Capacity System

Dong Nai Province 1 MW • SUN2000-60KTL-M0

Location Capacity System

Binh Phuoc Province 3 MW • SUN2000-100KTL-M1

SOLAR.HUAWEI.COM
 Digital Power
Professional PaaS & SaaS for energy

Green power Energy Transportation Green ICT Integrated

generation digitalization electrification infrastructure smart power

PV/Wind/ESS Micro-grid Smart grid Digitalized power plant EV Charging network Site power Data center Campus Building

Evolve the society from low carbon to zero carbon

Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.

Trademark Notice

, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.

General Disclaimer
The information in this document may contain predictive statements including, without limitation, statements
regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number
of factors that could cause actual results and developments to differ materially from those expressed or implied in the
predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an
offer nor an acceptance. Huawei may change the information at any time without notice.

Huawei Technologies (Vietnam) Co., Ltd

Address 1: Floor 33, Keangnam Landmark, E6, Pham Hung Street, Me Tri Ward, Nam Tu Liem District, Ha Noi
Address 2: Floor 14, Vincom Dong Khoi Center, 72 Le Thanh Ton Street, Ben Nghe Ward, District 1, Ho Chi Minh City
0084969995318 (Mr. Nguyen Huu Doan – Senior Solution Manager)
0084967799834 (Mr. Cao Xuan Thanh – Service Director)
https://solar.huawei.com/vn

SOLAR.HUAWEI.COM