Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

RT Acceptance Criteria All Code

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

RT Acceptance Criteria

CODES ASME SEC VIII DIV-1 API-1104 API-650 ANSI/ ASME B 31.3 ASME B 31.1 ASME Sec IX AWS D1.1

Used For Pressure Vessel Cross Country Storage TANKS Chemical Plants Power Boiler For TEST Pieces Structural &

Under Ground Piping Petroleum Refinery,Gas WQT/PQR Marines

5
Transmission Piping Plant, Process Piping

SL Discontinuity

56
1 Cracks Not Acceptable Crater & star length <3.9mm Not Acceptable Not Acceptable Not Acceptable Not Acceptable Not Acceptable
Lack of
2 Penetration Not Acceptable Max 25.4 mm Not Acceptable Not Acceptable Not Acceptable Not Acceptable Not Acceptable

(Normal and Category M Fluid


Service FOR Girth
Miter

79
Groove, and
Branch
Connection
Welds) < 38 mm in 150 mm
length or 25% of total weld
length, whichever is less

50
Category D Fluid Service-Girth
and
Miter
Groove
Welds ≤38 mm (1.5 in.) in any
150 mm (6 in.) weld length
or 25% of total weld length,

15
whichever is less

3 Lack of Fussion Not Acceptable Max 25.4 mm Not Acceptable Not Acceptable Not Acceptable Not Acceptable Not Acceptable
Category D Fluid Service-Girth
and
Miter
Groove

8
Welds ≤38 mm (1.5 in.) in any
150 mm (6 in.) weld length
or 25% of total weld length,
whichever is less
91
4 Burn Through 2 / 3 T when T is Not exceed 6.35 mm in Not Acceptable Not Acceptable Not Acceptable Not Acceptable Not Acceptable

thickness of plate 300 mm weld length

5 Under Cut 0.8mm or 0.1T which Not exceed 1/16th 0.8mm or 0.1T which Depth of undercut 1 mm or T/4 Not Acceptable As per Chart
/
Cumulative length of internal
and external undercut ≤38 mm
(1.5 in.) in any 150 mm (6 in.)
25

weld length
or 25% of total weld length,
ever is lesser is accept weld length ever is lesser is accept whichever is less

(1) Up to 10 mm base metal


thickness - 3mm accept
(2) 10 to 57 mm base metal
35

6 Slag Inclusion Thk mm Length mm Max Length 50.8 mm Thk mm Length mm 1 / 3T Length Thk mm Length mm thickness - t/3 mm accept Length 6.0mm
(3) above to 57 mm base
metal thickness thickness -
19mm accept

Elongated 0 to 19 6.3 Width 1.59mm, Pipe <60.3 mm 0 to 19 6.3 width 1.59mm thk in 0 to 19 6.3 0 to 19 -6.3mm width 1.5mm
83

19 to 57 1 / 3T 3T max Length 19 to 57 1 / 3T 12x weld lenth 19 to 57 1 / 3T 19 to 57 - 1/3T

> 57 - 19 mm > 57 - 19 mm Elongated - 4T > 57 - 19 mm >57 -19mm

6 Slag Inclusion 2 / 3T when T is Max Length 12.7mm Max T in a Length of 1 / 3T Length Max T in a Length of 3.0mm Dia - 50mm

Isolated Thickness of Plate width 3.17mm, pipe 12T when distance width 1.59mm thk in 12T when distance 4.5mm Dia - 50-70mm

0<60.3mm 2T max Length between indications 12x weld lenth between indications

or 300mm weld Length exceed 6L when L is individual - 2T exceed 6L when L is


10

Longest Indication Longest Indication

7 Porosity The Max size of Isolate max size of individual pore The max size of in 3mm thick the isolated pore

& Pores shall be 1/4T or 3.17mm max of group isolate 1/3T length more No.of rounded 3.0mm dia-50mm

Porosity 4.0mm which ever is 12.7mm individual size pores shall be1/4T width 2.4mm As above Indication shall not 4.5mm dia-50-70mm

cluster lesser if the separation 1.59mm 4.0mm which ever is exceed 12 mm in isolated worm holes
80

of two pore is 25.4 mm lesse of the seperation 150 mm of length Length 6.0mm

then max size is 1/61 or of two pores 25.4mm OR width 1.5mm

6.4mm for T > 50.8 max then max size is 1/4T 20% Of T

Isolated pore size

is 3.5 mm
91

You might also like