Electric Vehicle Standardization

Progress in Indonesia
Directorate of Standard Development for Mechanical, Energy,
Electrotechnical, Transportation and Information Technology

Jakarta, November 21 th 2019

National Standardization Agency of

Indonesia
1
 Background

*BOE : The barrel of oil equivalent

Source : https://www.esdm.go.id/assets/media/content/content-handbook-of-energy-and-
economic-statistics-of-indonesia-2018-final-edition.pdf;

2
 Background
1. Fuel Energy Consumption
• To Reduce of fuel consumption (imports).
• Increased energy efficiency and conservation
especially to support transportation and
industry sector.
2. Environment:
• clean energy and environment friendly.
• Indonesia's commitment to reduce emissions
greenhouse gas.

3
National Technical Committee
Related to EV and Charging
SystemElectric Vehicle

4
 National Technical Committee
(Related to EV and Charging System)
No Code TC Secretariat
1 43-01 Road vehicle Ministry of Industry
2 43-01-S1 Automotive Component Ministry of Industry
3 43-02 Kendaraan jalan raya bertenaga listrik BSN
4 29-01 Electricity System
5 29-02 Electrical protection equipment and systems
6 29-03 Electrical insulation
7 29-04 Electric Power Transmission and Distribution
Network Ministry of Energy and Mineral
8 29-05 Transformer Resources
9 29-06 Electricity installation and reliability
10 29-07 Cables and electrical conductors
11 29-08 Electrical Equipment
12 29-09 Electric Machine
13 31-01 Household Electronics Ministry of Industry
14 91-03 General Requirements For Electrical Installation Ministry of Energy and Mineral
Resources

5
 TC 43-02 Electric Vehicle
• Creation Date
September 2016

• Secretariat :
Badan Standardisasi Nasional

• Scope
Specific aspects of electrically propelled road vehicles, electric propulsion
systems, related components and vehicle integration.

This TC is responsible for National Mirror Committee of:

o ISO/TC 22/SC 37 Electrically propelled vehicles
o IEC TC 69 Electric road vehicles and electric industrial trucks
Indonesia is participated as P-Member in both international Technical
Committee.

6
 Membership of 43-02
No Position Name Institution
1 Chair Putu Juli Ardika Ministry of Industry
2 Co-Chair Wiwiek Joelijani Ministry of Research, Technology and Higher
Education
3 Secretary Fandi Yogiswara BSN
4 Member Muhammad Ihsan Ministry of Industry
5 Member Alief Wikarta Institut Teknologi Sepuluh November
6 Member D. Danardono Dwi Prija T Universitas Sebelas Maret Surakarta
7 Member Siti Choirun Nisa Asosiasi Gabungan Industri Alat-Alat Mobil dan
Motor
8 Member Bambang Prihandoko Asosiasi Pengembang Kendaraan Listrik
Bermerek Nasional
9 Member Hermawan Wijaya PT NIPRESS Tbk
10 Member Asosiasi Gabungan Industri Alat-Alat Mobil dan
Budi Prasetyo Susilo
Motor
11 Member Hanggoro AISI
12 Member Bayu Sentany B4T
13 Member Arifin Ministry of Transportation
14 Member Doney Kusuma Ministry of Energy and Mineral Resources
15 Member Agus Purwadi Institut Teknologi Bandung
7
 TC 43-02 Electric Vehicle

To accommodate participation of National

stakeholder, TC 43-02 has three working
groups as follows:
• System and Component of Electric Vehicle
• Safety Aspect of Electric Vehicle
• Charging system and infrastructure of
Electric Vehicle

8
 EV‘s standards for Vehicle System and Component
SNI/ISO/IEC Standards
Category Description
Cars Motorcycles / Moped
General General SNI ISO/TR 8713:2017 SNI 8608:2018
Terminology
(ISO/TR 8713:2012, IDT) (ISO/TR 13062:2015, IDT)
SNI ISO 6469-1: 2009
(Ditetapkan oleh BSN tahun 2019 )
Electrification safety SNI ISO 6469-2: 2018 SNI 8613:2018
(vehicle) (Ditetapkan oleh BSN tahun 2019) (ISO 13063:2012, IDT)
Safety
SNI ISO 6469-3:2011
(Ditetapkan oleh BSN tahun 2019)
Vehicle system Electrification safety (post- SNI ISO 6469-4:2015
impact) (Ditetapkan oleh BSN tahun 2019)
RSNI3 ISO 8714 SNI 8614-1:2018
Electricity consumption
(Public enquiry stage) (ISO 13064-1:2012, IDT)
Performance
RSNI3 ISO 8715 SNI 8614-2:2018
Vehicle performance
(Public enquiry stage) (ISO 13064-2:2012, IDT)
Cell size ISO/PAS 16898
SNI IEC 62660-1:2017 (IEC 62660-1:2010, IDT)
Cell testing & safety SNI IEC 62660-2:2017 (IEC 62660-2:2010, IDT)
RSNI3 IEC 62660-3:2016 (Public enquiry stage)
RSNI3 ISO 12405-4
Battery pack Performance ISO 18243
Battery (Public enquiry stage)
EV Vehicle RSNI3 (Public enquiry
Battery pack safety RSNI3 (Public enquiry stage)
Component stage)
Non Li-Ion Battery IEC 61982
Li-Ion + Lead Acid Battery ISO 18300
Recycle Li-Ion + Non Li-Ion N/A
ISO 21782 (Part 1 s.d 7) ISO 23280
Motor, Inverter & Motor, Inverter & converter
(Under development) (Under development)
converter

9
 EV ‘s standards for Charging
SNI/ISO/IEC Standards
Category Description
Cars Motorcycles/ Moped
SNI IEC 61851-1:2017
(Ditetapkan oleh BSN tahun 2019)
SNI IEC 61851-23:2014 IEC 61851-3 (series)
Conductive charging system
(Ditetapkan oleh BSN tahun 2019) (under development)
SNI IEC 61851-24 2014
(Ditetapkan oleh BSN tahun 2019)
Safety for household battery
SNI IEC 60335-2-29:2012
charger
IEC 61980-1
IEC 61980-2
Wireless power transfer
IEC 61980-3
Infrastructures Charging
ISO 19363
System
Connection to an external
ISO 17409 ISO 18246
electric power supply
EMC (On-board) SNI IEC 61851-21-1:2017 (Ditetapkan oleh BSN tahun 2019)
EMC (Off-board) IEC 61851-21-2
IEC 62840-1 IEC TS 61851-3-3
Swap battery system
IEC 62840-2 (dalam pengembangan)
In-cable control IEC 62752
SNI IEC 62893-1:2017 (Ditetapkan oleh BSN tahun 2019)
Charging cable SNI IEC 62893-2:2017 (Ditetapkan oleh BSN tahun 2019)
SNI IEC 62893-3:2017 (Ditetapkan oleh BSN tahun 2019)
10
 EV ‘s standards for Charging

SNI/ISO/IEC Standards
Category Description
Cars Motorcycles/ Moped
SNI IEC 62196-1:2014
(Ditetapkan oleh BSN tahun
2019)
SNI IEC 62196-2:2016
Charging IEC TS 62196-4
Charging Connector (Ditetapkan oleh BSN tahun
Connector
2019)
Infrastructures
SNI IEC 62196-3:2014
(Ditetapkan oleh BSN Tahun
2019)
Interface IEC 62831 (under development)
Communication
Vehicle to grid ISO 15118 (Part 1 to 8) year 2020-2021
Interface
Roaming service IEC 63119-1:2019

11
 Published SNI in 2017 -2018
from TC 43-02 Electric Vehicle
No SNI Number Title Adopted Standard
SNI ISO TR Kendaraan berpenggerak (propulsi) listrik - ISO TR 8713:2012 Electrically
1
8713:2017 Kosakata propelled road vehicles — Vocabulary
Sel ion Lithium sekunder untuk penggerak IEC 62660-1 Secondary lithium-ion
SNI IEC 62660-1
2 kendaraan listrik Bagian 1 : Pengujian cells for the propulsion of electric road
:2017
Performa vehicles – Part 1: Performance testing
IEC 62660-2 Secondary lithium-ion
Sel ion-lithium sekunder untuk penggerak
SNI IEC 62660- cells for the propulsion of electric road
3 kendaraan listrik – Bagian 2: Pengujian
2:2017 vehicles – Part 2: Reliability and abuse
keandalan dan penyalahgunaan
testing
ISO/TR 13062:2015 Electric mopeds
SNI ISO/TR Sepeda motor dan mopeds elektrik -
4 and motorcycles - Terminology and
13062:2018 Terminologi dan klasifikasi
classification
ISO 13063:2012 Electrically propelled
SNI ISO Sepeda motor dan mopeds elektrik -
5 mopeds and motorcycles — Safety
13063:2018 Spesifikasi keselamatan
specifications

12
 Published SNI
(from TC 43-02)
No SNI Number Title Adopted Standard
ISO 13064-1 Battery-electric mopeds
Kinerja - Moped dan Sepeda Motor Baterai-
6
SNI ISO 13064-1 and motorcycles — Performance —
Listrik - Bagian 1 : Konsumsi dan jangkauan
:2018 Part 1: Reference energy consumption
energi acuan
and range
Kinerja – Moped dan sepeda motor Baterai- ISO 13064-2 Battery-electric mopeds
SNI ISO 13064-2
7 listrik Bagian 2 : Karakteristik and motorcycles — Performance —
:2018
pengoperasian jalan Part 2: Road operating characteristics

Currently, BSN is conducting public hearing of the SNI certification scheme for the
performance of two-wheeled electric vehicle (Lingkup SNI ISO 13064-1 dan SNI ISO
13064-2)

The scheme can be seen as follow:

https://bsn.go.id/main/berita/detail/10666/public-hearing-skema-sertifikasi-kendaraan-
listrik-dan-skema-sertifikasi-laundry-rumah-sakit

13
 SNI Mark

SNI mark as proof of product conformity

that meets :
• SNI ISO 13064-1 Battery-electric
mopeds and motorcycles —
Performance — Part 1: Reference
energy consumption and range
• SNI ISO 13064-2 Battery-electric
mopeds and motorcycles —
Performance — Part 2: Road operating
characteristics

14
 TC 43-02 Work Programme 2019
No Title Reference
ISO 12405-3
Kendaraan berpenggerak listrik -
Electrically propelled road vehicles — Test
spesifikasi uji kemasan dan sistem
1 specification for lithium-ion traction battery
baterai traksi lithium ion - Bagian 3:
packs and systems — Part 3: Safety
Persyaratan kinerja keselamatan
Performance requirements
Kendaraan berpenggerak listrik – IEC 62660-3:2016
spesifikasi uji kemasan dan system Secondary lithium-ion cells for the
2
baterai traksi lithium ion- Bagian 3: propulsion of electric road vehicles - Part
Persyaratan kinerja keselamatan 3: Safety requirements
UNR 100
RSNI3 Kendaraan bermotor Uniform provisions concerning the
berpenggerak listrik kategori M dan N approval of vehicles with regard to specific
– Sistem penyimpanan energi listrik requirements for the electric power train
3
mampu-isi-ulang / Rechargeable
Electrical Energy Storage System Part II: Requirements of a Rechargeable
(REESS) – Persyaratan keselamatan Energy Storage System (REESS) with
regard to its safety

15
 TC 43-02 Work Programme 2019
No Title Reference
Kendaraan bermotor UNR 136
berpenggerak listrik kategori L – Uniform provisions concerning the approval of
Sistem penyimpanan energi vehicles of category L with regard to specific
4 listrik mampu-isi-ulang / requirements for the electric power train
Rechargeable Electrical Energy
Storage System (REESS) – Part II: Requirements of a Rechargeable Energy
Persyaratan keselamatan Storage System (REESS) with regard to its safety
Kendaraan berpenggerak listrik - ISO 8715:2001
5 Karakteristik pengoperasian Electric road vehicles - Road operating
jalan raya characteristics
Kendaraan berpenggerak listrik - ISO 8714:2002
Konsumsi energi dan jarak Electric road vehicles - Reference energy
tempuh acuan - Prosedur consumption and range – Test procedures for
6
pengujian untuk mobil passenger cars and light commercial vehicles
penumpan dan kendaraan
komersial ringan
Swap Battery untuk sepeda motor
listrik (mendukung Perpres 55
7
tahun BAB III PEMBERIAN
INSENTIF Pasal 17 butir 3.f
16
 TC 43-02 Work Programme 2020
Standar yang
No Judul
diadopsi
1 Kendaraan jalan raya bertenaga listrik - Spesifikasi uji untuk komponen propulsi
ISO 21782-1:2019
listrik – Bagian 1 : Definisi dan kondisi pengujian umum
2 Kendaraan jalan raya bertenaga listrik - Spesifikasi uji untuk komponen propulsi
ISO 21782-2:2019
listrik – Bagian 2 : Pengujian kinerja sistem motor
3 Kendaraan jalan raya bertenaga listrik - Spesifikasi uji untuk komponen propulsi
listrik – Bagian 3 : Pengujian Kinerja Motor dan Inverter ISO 21782-3:2019

4 Kendaraan jalan raya bertenaga listrik - Spesifikasi uji untuk komponen propulsi
ISO 21782-6:2019
listrik – Bagian 4 : Pengujian beban operasi motor dan inverter
5 Kendaraan jalan raya - antarmuka komunikasi kendaraan ke jaringan listrik- bagian
ISO 15118-1:2019
1: informasi umum dan definisi kasus penggunaan

17
EV Charging System Standardization

18
 SNI Publication
(EV Charging System related)
No SNI Number Title Adopted Standard TC
Sistem pengisian konduktif kendaraan listrik- Bagian 1:
1 SNI IEC 61851-1:2017 IEC 61851-1:2017 29-06
Persyaratan umum
Sistem charging konduktif kendaraan listrik- Bagian 21-
29-06
2 SNI IEC 61851-21-1:2017 1: Persyaratan EMC untuk koneksi konduktif ke suplai IEC 61851-21-1:2017
AC/DC untuk charger on-board kendaraan listrik
Sistem pengisian konduktif kendaraan listrik - Bagian
3 SNI IEC 61851-23:2014 IEC 61851-23:2014 29-06
23 : Stasiun pengisian kendaraan listrik a.s.
Sistem pengisian konduktif kendaraan listrik - Bagian
24 : Komunikasi digital antara stasiun pengisian
4 SNI IEC 61851-24:2014 IEC 61851-24:2014 29-06
kendaraan listrik a.s. dan kendaraan listrik untuk
kendali pengisian a.s.
Steker, stopkontak, konektor kendaraan dan inlet
5 SNI IEC 62196-1:2014 kendaraan- Pengisian konduktif kendaraan listrik- IEC 62196-1:2014 29-08
Bagian 1: Persyaratan umum
Steker, stopkontak, konektor kendaraan dan inlet
kendaraan- Pengisian konduktif kendaraan listrik-
6 SNI IEC 62196-2:2016 Bagian 2: Kompatibilitas dimensi dan persyaratan IEC 62196-2:2016 29-08
kemampusalingtukaran untuk pin a.b. dan lengkapan
tabung kontak
Steker, stopkontak, konektor kendaraan dan inlet
kendaraan- Pengisian konduktif kendaraan listrik-
7 SNI IEC 62196-3:2014 Bagian 3: Kompatibilitas dimensi dan persyaratan IEC 62196-3:2014 29-08
kemampusalingtukaran untuk pin a.s. dan a.b./a.s. dan
AC/DC dan kopler tabung kontak kendaraan

19
 SNI Publication
(EV Charging System related)
No SNI Number Title Adopted Standard TC
Kabel pengisian untuk kendaraan listrik bervoltase
8 SNI IEC 62893-1:2017 pengenal sampai dengan 0,6 / 1 kV - Bagian 1 : IEC 62893-1:2017 29-06
Persyaratan umum
Kabel pengisian untuk kendaraan listrik bervoltase
29-06
9 SNI IEC 62893-2:2017 pengenal sampai dengan 0,6 / 1 kV - Bagian 2 : Metode IEC 62893-2:2017
uji
Kabel pengisian untuk kendaraan listrik bervoltase
pengenal sampai dengan 0,6 / 1 kV - Bagian 1 : Kabel
10 SNI IEC 62893-3:2017 untuk pengisian a.b. menurut mode 1, 2 dan 3 IEC IEC 62893-3:2017 29-06
61851-1 bervoltase pengenal sampai dengan 450/750
V
Kendaraan jalan yang digerakkan listrik - Spesifikasi
11 SNI ISO 6469-1:2009 keselamatan - Bagian 1: Sistem penyimpanan energi ISO 6469-1:2009 29-06
yang dapat diisi ulang di mobil (RESS) ()
Kendaraan jalan yang digerakkan listrik - Spesifikasi
12 SNI ISO 6469-2:2018 keselamatan - Bagian 2: Keselamatan operasional ISO 6469-2:2018 29-08
kendaraan
Kendaraan jalan yang digerakkan listrik - Spesifikasi
13 SNI ISO 6469-3:2011 keselamatan - Bagian 3: Proteksi manusia terhadap ISO 6469-3:2011 29-08
kejut listrik
Kendaraan jalan yang digerakkan listrik - Spesifikasi
14 SNI ISO 6469-4:2015 keselamatan - Bagian 4: Keselamatan listrik pasca ISO 6469-4:2015 29-08
tabrakan

20
EV ‘s standards for Charging

21
EV ‘s standards for Charging System is adopted as Technical Regulation
by Ministry of Energy and Mineral Resource

22
 Picture 2. Charging station for Electronic Vehicle

EV Charging Station at PT Pertamina Parking EV Charging Station at PT PLN EV Charging Station at ITB
Lot (Jl. Perwira, Central Jakarta) Parking Lot (Central Jakarta) Energy Conservation Laboratory
(Bandung)
Picture 3. Charging station for Electric Vehicle
25
 Kontak BSN
• Website BSN : www.bsn.go.id
• SISPK : www.sispk.bsn.go.id
• Pembelian SNI : dokinfo@bsn.go.id or come
directly to:
Layanan Informasi Terpadu (LITe) BSN
Gedung BPPT 1 , Lt.Dasar
Jl. MH Thamrin No.8

26