Submersible Dewatering Pump High Head Series EU

DIMENSION
PUMP

Submersible Dewatering Pump

High Head Series Type EU

Submersible pumps with only a single impeller except (150EU5150) carry out
dewatering job up to unbelievable higher locations. Simple structure of these
models ensures easy maintenance at your heavy-duty worksites.

100EU522 100EU530 150EU537 • 150EU545 • 150EU555

200EU537 • 200EU545 • 200EU555 APPLICATIONS
Dimension in ( ) refers to 150EU545 and 200EU545

• Drainage out of sumps, pits, quarries, minings, cellars

• Tunnels, Caisson dewaterings, reclaiming operations, power station constructions
• Waste, storm or emergency water removal, dams, harbour projects
• Contractors & rental companies, etc

FEATURES
• Motor Protector
Incorporating Miniature Thermal Protector (MTP) and
Infiltrative Water Detector (WD) in the pump body protect
the motor from thermal and mechanical troubles. Both in
combination with external pump operating panel
equipped with Electro Magnectic Contactor (MC),
Infiltrative Water Detector Relay Set (WD-X) and
Thermal Relay (THR), the pump assures perfect and
safety-minded motor protection. In case water
infiltrates the motor housing or the temperature
in the motor coil rises to a set maximum, the WD
fitted immediately beneath the motor compartment or
the MTP activates the MC by way of WD-X or THR
in order to cut off the electric supply to the motor.
100EU522 is not with MTP nor WD. This models shall be
150EU575 • 150EU5110 250EU575 • 250EU5110 150EU5150 provided with an external pump operating panel equipped
200EU575 • 200EU5110
with MC for the protection of the motor upon request.
* Dimensional details are provided for reference only.
* All specifications are subject to change without prior notice. • Motor
The motors are well designed to demonstrate higher
Authorised dealer:
motor efficiency and torque. The stators conform to
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park, class B insulation rating, ensure high heat resistance.
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM EU 1014
Submersible Dewatering Pump High Head Series EU Submersible Dewatering Pump High Head Series EU

FEATURES PERFORMANCE CURVE

• Shaft Seal 110 20
Double mechanical seals are cooled and lubricated in the oil bath. Together with the good effect of 0E 50Hz
design of pressure relief furnished just beneath the motor compartment, guarantee reliable sealing effect 100

U
51
10
and steady effect & service at heavy-duty sites for a long period of time. 90
25
0E
20 U5
80 18
• Impeller & Casing 2
0E
U
5
Close impeller made of High Chrome Alloy in heavy gauge body gives high 70

00

57
EU
Total Head (m)

5
efficiency in pumping performance in combination with assorted casing as well as providing admirable 20
0E

55
60
resistance in the water containing abrasive solid particles.

5
U
2
50 0

54
5

25
0E
• Grease Replenisher 25

U5

0E
40 0E

37

U5
Grease replenishing attachment is furnished with the models in this series with more than 100HP

11
U
30

57
motor output to simplify their grease maintenance of bearings.

0
5
20
NOTE : In the case of stationary operation, water level regulating equipment is available at extra cost upon your request. Motors
bigger than 50HP are star-delta starting. Other specifications shall be considerable upon requests. 10

SPECIFICATIONS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Capacity (m3/min)

• Discharge Dia. : 100 - 250mm

Nominal Outer dimension (mm)
• Total Head : 33 - 200m Model
diameter Output
(kW)
Ph/Hz/V
Total Head Capacity
(m) (m3/min)
Max. Head
(m)
Weight
(kg)
• Capacity : 1.0 - 10m3/min 50Hz (mm) Max. diameter Height
200EU537 200 37 35 4.0 58 542 1385 510
• Motor Output : 22 - 185kW
200EU545 200 45 40 4.0 63 542 1315 510
200EU555 200 55 50 4.0 75 542 1385 560
PERFORMANCE CURVE 200EU575 200 75
3/50/415
60 4.5 80 570 1550 980
200EU5110 200 110 90 4.5 110 570 1550 1080
250EU575 250 75 33 8.4 53 680 1585 980
230
220 50Hz 250EU5110 250 110 50 8.4 67 565 1585 1000
210 150 250EU5185 250 185 74 10.0 92 735 1900 1450
EU
200 515
0
190
180
170 SECTIONAL VIEW
160
150
150EU5
Total Head (m)

140 110
130
120 1 5 0 EU
110 575
100 150E
90 U5
1 50 E 5 5
80 U5 4
150
70 EU 5
1 00 53
7
60 1 0 0 EU 5
50 EU 3 0
52
40 2
30

0 1 2 3
Capacity (m3/min)

Nominal
Model Output Total Head Capacity Max. Head Outer dimension (mm) Weight
diameter Ph/Hz/V
(kW) (m) (m3/min) (m) (kg)
50Hz (mm) Max. diameter Height
100EU522 100 22 60 1.0 68 455 970 280
100EU530 100 30 70 1.0 78 420 1130 380
150EU537 150 37 80 1.0 87 542 1385 485
150EU545 150 45 90 1.0 96 542 1315 485
3/50/415
150EU555 150 55 90 2.0 105 542 1385 545
150EU575 150 75 120 1.5 125 570 1550 980
150EU575 • 150EU5110 200EU537 • 200EU545 • 200EU555
150EU5110 150 110 140 2.5 155 565 1550 1080
150EU5150 150 150 200 2.5 225 550 1760 1250
Submersible Dewatering Pump High Head Series EU Submersible Dewatering Pump High Head Series EU

FEATURES PERFORMANCE CURVE

• Shaft Seal 110 20
The twin mechanical seals are cooled and lubricated in the oil bath. Together with the good effect of 0E 50Hz
design of pressure relief furnished just beneath the motor compartment, guarantee reliable sealing effect 100

U
51
10
and steady effect and steady service at heavy-duty sites for a long period of time. 90
25
0E
20 U5
80 18
• Impeller & Casing 2
0E
U
5
The close typed impeller made of High Chrome Alloy and housed in a heavy gauge body gives high 70

00

57
EU
Total Head (m)

5
efficiency in pumping performance in combination with assorted casing as well as providing admirable 20
0E

55
60
resistance in the water containing abrasive solid particles.

5
U
2
50 0

54
5

25
0E
• Grease Replenisher 25

U5

0E
40 0E

37

U5
Grease replenishing attachment is furnished with the models in this series with more than 100HP

11
U
30

57
motor output to simplify their grease maintenance of bearings.

0
5
20
NOTE : In the case of stationary operation, water level regulating equipment is available at extra cost upon your request. Motors
bigger than 50HP are star-delta starting. Other specifications shall be considerable upon requests. 10

SPECIFICATIONS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Capacity (m3/min)

• Discharge Dia. : 100 - 250mm

Nominal Outer dimension (mm)
• Total Head : 33 - 200m Model
diameter Output
(kW)
Ph/Hz/V
Total Head Capacity
(m) (m3/min)
Max. Head
(m)
Weight
(kg)
• Capacity : 1.0 - 10m3/min 50Hz (mm) Max. diameter Height
200EU537 200 37 35 4.0 58 542 1385 510
• Motor Output : 22 - 185kW
200EU545 200 45 40 4.0 63 542 1315 510
200EU555 200 55 50 4.0 75 542 1385 560
PERFORMANCE CURVE 200EU575 200 75
3/50/415
60 4.5 80 570 1550 980
200EU5110 200 110 90 4.5 110 570 1550 1080
250EU575 250 75 33 8.4 53 680 1585 980
230
220 50Hz 250EU5110 250 110 50 8.4 67 565 1585 1000
210 150 250EU5185 250 185 74 10.0 92 735 1900 1450
EU
200 515
0
190
180
170 SECTIONAL VIEW
160
150
150EU5
Total Head (m)

140 110
130
120 1 5 0 EU
110 575
100 150E
90 U5
1 50 E 5 5
80 U5 4
150
70 EU 5
1 00 53
7
60 1 0 0 EU 5
50 EU 3 0
52
40 2
30

0 1 2 3
Capacity (m3/min)

Nominal
Model Output Total Head Capacity Max. Head Outer dimension (mm) Weight
diameter Ph/Hz/V
(kW) (m) (m3/min) (m) (kg)
50Hz (mm) Max. diameter Height
100EU522 100 22 60 1.0 68 455 970 280
100EU530 100 30 70 1.0 78 420 1130 380
150EU537 150 37 80 1.0 87 542 1385 485
150EU545 150 45 90 1.0 96 542 1315 485
3/50/415
150EU555 150 55 90 2.0 105 542 1385 545
150EU575 150 75 120 1.5 125 570 1550 980
150EU575 • 150EU5110 200EU537 • 200EU545 • 200EU555
150EU5110 150 110 140 2.5 155 565 1550 1080
150EU5150 150 150 200 2.5 225 550 1760 1250
 Submersible Dewatering Pump High Head Series EU

DIMENSION
PUMP

Submersible Dewatering Pump

High Head Series Type EU

Submersible pumps with only a single impeller except 150EU5150 carry out
dewatering job up to unbelievable higher locations. Simple structure of these
models ensures easy maintenance at your heavy-duty worksites.

100EU522 100EU530 150EU537 • 150EU545 • 150EU555

200EU537 • 200EU545 • 200EU555 APPLICATIONS
Dimension in ( ) refers to 150EU545 and 200EU545

• Drainage out of sumps, pits, quarries, minings, cellars

• Tunnels, Caisson dewaterings, reclaiming operations, power station constructions
• Waste, storm or emergency water removal, dams, harbour projects
• Contractors & rental companies, etc

FEATURES
• Motor Protector
Incorporating Miniature Thermal Protector (MTP) and
Infiltrative Water Detector (WD) in the pump body protect
the motor from thermal and mechanical troubles. Both in
combination with external pump operating panel
equipped with Electro Magnectic Contactor (MC),
Infiltrative Water Detector Relay Set (WD-X) and
Thermal Relay (THR), the pump assures perfect and
safety-minded motor protection. In case water
infiltrates the motor housing or the temperature
in the motor coil rises to a set maximum, the WD
fitted immediately beneath the motor compartment or
the MTP activates the MC by way of WD-X or THR
in order to cut off the electric supply to the motor.
100EU522 is not with MTP nor WD. This models shall be
150EU575 • 150EU5110 250EU575 • 250EU5110 150EU5150 provided with an external pump operating panel equipped
200EU575 • 200EU5110
with MC for the protection of the motor upon request.
* Dimensional details are provided for reference only.
* All specifications are subject to change without prior notice. • Motor
The motors are well designed to demonstrate higher
Authorised dealer:
motor efficiency and torque. The stators conform to
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park, class B insulation rating, each highly heat resistance.
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM EU 1014