DETAILS ON VALUATION OF PLANT & MACHINERY AND OTHERS RELATED EQUIPMENTS

S.n o Description of Article

I PULP SECTION COMMON STOCK PREPARATION

• Slot Chain Conveyor for feeding Raw materials, including M.S.

Table - For HICON LINE, conveying length: 12.0 mtr (app), width:
0.8mtr, drive motor: 75H.P with Gear box, with all supporting structures,
Qty: 1no,
• Slot Chain Conveyor for feeding Raw materials, including M.S.
Table - For MEDIUM-CON LINE, conveying length: 12.0 mtr (app), width:
1 0.75mtr, drive motor: 75H.P with Gear box,with all supporting structures,
Qty: 1no,
• Slot Chain Conveyor for feeding Raw materials, including M.S.
Table - For LOWCON LINE, conveying length: 12.5 mtr (app), width:
1.0mtr, drive motor with Gear box, with all supporting structures,
Qty:1no

II PAPER MACHINE - REFINERY

HYDRO PULPER (High Consistency Pulper) - HICON PULPER

Vertical PULPER – S.S cladding constructed,

with all accessories and connections including Impeller, Pulper drive
motor – 75 H.P with Pump,Make: NIL, Qty: 1no,High Consistency Pulper -
2 Vacuum Pump with motor, qty: 1no, Primary Centri Cleaner (Top
Layer), capacity: 400 m³/hr, head: 30 mtr, pump with motor: 37KW (make:
ELGI), qty: 1no, Primary & Secondary Centri Cleaner, 8-centrifuge
filters, 2nos of transfer pump with motor, Qty: 1sec, Vibrating Screen
with vibro arrangements & drive motor, Qty: 2nos,

HYDRO PULPER (Medium Consistency Pulper) - MEDIUM - CON PULPER

Vertical Pulper – S.S cladding constructed, with all accessories and
connections including Impeller, Pulper drive motor: 75H.P with Pump,
Make: NIL, Qty: 1no, Medium Consistency Pulper - Vacuum Pump with
3 motor, qty:1no, Primary Centri Cleaner, 6-centrifuge filters, of
transfer pump with motor, Qty: 1sec, Secondary Centri Cleaner, 3-
centrifuge filters, transfer pump with motor, Qty: 1sec, Tertiary Centri
Cleaner, 1- centrifuge filters, transfer pump with motor, Qty: 1sec,
 • HYDRO PULPER (Low Consistency Pulper)-LOWCON PULPER
Vertical Pulper – S.S cladding constructed, with all accessories and
connections including Impeller,Pulper drive motor with Pump, Make:
NIL, Qty: 1no,
• LOWCON Pulper (Screen) -
M.S. construction with Screen Drive motor, make: -, Qty: 1no, •
Primary Centri Cleaner, 7- centrifuge filters, of transfer pump with
motor, Qty: 1sec,
• Secondary Centri Cleaner, 4- centrifuge filters, transfer pump with
motor, Qty: 1sec,
• Tertiary Centri Cleaner, 1- centrifuge filters, transfer pump with
motor, Qty: 1sec,
• Low Consistency Pulper - Vacuum Pump with motor, Qty: 1no,
4 • Turbo Separator, with belt drive motor & pump, Qty: 2nos,
• Sliding Screen - S.S.
construction with all accessories and connections – Screen, transfer
pump with motor, Qty: 2nos, • Triple Disk Refiner
(TDR) (size: 17”) - with all accessories and connections, make:
Parason Machinery (India) Pvt. Ltd., model: TDR17SM, s.no:
000730, Drive motor, year:2007, Qty: 1no,
• Triple Disk Refiner
(TDR) (size: 17”) - with all accessories and connections, make:
Parason Machinery (India) Pvt. Ltd., model:TDR17SM, s.no:
000731,
Drive motor, year: 2007, Qty: 1no,
• Skid mounted - HDPE Tank with agitator with motor, Qty:
2nos

Location: Plant

• Chest (for LOW-CON) with Agitator (with drive motor) & Pump, Qty:
1no,
• Chest (for HIGH-CON)
with Agitator (with drive motor) & Pump, Qty: 1no,
• Cyclone
separator with suction fan (with motor), Qty: 1sec
• Discharge pump with motor, Qty: 1no, Circulation pump with motor,
Qty: 1no,
• CHEST UNITS consist of
• B/L Collection Chest with Agitator (with drive motor: 15H.P.) &
Pump (with motor: 60H.P.), Qty: 1no,
• P/L Collection Chest with Agitator (with drive motor: 15H.P.)
& Pump (with motor: 30H.P.), Qty: 1no,
• Top Collection Chest with Agitator (with drive motor:
15H.P.) & Pump (with motor: 25H.P.), Qty: 1no,
• Top Refiner Collection Chest with Agitator (without drive
5 motor) & Pump (with motor: 30H.P.), Qty: 1no,
• P/L Collection Chest with
Agitator (with drive motor: 15H.P.) & Pump (with motor: 15H.P.), Qty: 1no,
 • B/L Collection Chest with Agitator (with drive motor: 15H.P.) &
Pump (with motor: 60H.P.), Qty: 1no,
• P/L Collection Chest with Agitator (with drive motor: 15H.P.)
& Pump (with motor: 30H.P.), Qty: 1no,
• Top Collection Chest with Agitator (with drive motor:
15H.P.) & Pump (with motor: 25H.P.), Qty: 1no,
• Top Refiner Collection Chest with Agitator (without drive
5 motor) & Pump (with motor: 30H.P.), Qty: 1no,
• P/L Collection Chest with
Agitator (with drive motor: 15H.P.) & Pump (with motor: 15H.P.), Qty: 1no,
• Top Machine Chest with Agitator (with drive motor: 15H.P.) &
Pump (with motor: 15H.P.), Qty: 1no,
• Top Thickener Chest with Agitator (with drive motor: 15H.P.) &
Pump (with motor: 15H.P.), Qty: 1no,
• P/L Thickener Chest with Agitator (with drive motor:
15H.P.) & Pump (with motor: 10H.P.), Qty: 1no,
• Top Stock Chest with Agitator (with drive motor: 15H.P.) &
Pump (with motor: 10H.P.), Qty: 1no,
• P/L Refiner Chest with Agitator (with drive motor: 15H.P.)
& Pump (with motor: 30H.P.), Qty: 1no,
• F/L Machine Chest with Agitator (with drive motor: 20H.P.) &
Pump (with motor: 20H.P.), Qty: 1no, •
B/L Machine Chest with Agitator (with drive motor:
20H.P.) & Pump (with motor: 10H.P.), Qty: 1no,

Spare Roller (wire mesh type) (size: 3938mm x 2400mm), make:

6 Shalimar Wires industries,
Qty: 1roll (New)
 Loc: Screen Section Building Ground Floor (Below)
Chest with Pump & motor - 1no,
R.C.C. Chest consist of
• Filler Bottom Thickener Chest with Agitator (with drive motor), Qty:
1no, (without Pump & motor)
• F/L & B/L BK Chest with Agitator (with drive motor) & Pump, Qty:
1no,
• Bottom Refiner Chest without drive motor & pump, Qty: 1no,
• Filler Stock Chest - 01 with Agitator (with drive motor), Qty: 1no,
(without pump)
• Filler Stock Chest - 02 with Agitator (with drive motor) & Pump, including
7 Flow meter & actuator valve Qty: 1no,
• F/L, S/C & A/G Chest with
Agitator (without drive motor & Pump), Qty: 1no,
• P/L Stock Chest with Agitator (with drive motor), Qty: 1no, (without pump)
• Bottom Stock Chest with Agitator (with drive motor) & Pump, Qty:
1no,
1st Floor of Screen Building
• Turbo separator with drive motor, Qty: 1no,
• Slide Screen - S.S. construction with steel supporting
structure, Feed Pump (with motor) Qty:
3nos,

Chemical Storage Tank (HDPE) - 10.0K.Ltrs, with transfer pump (make: JEE
Pumps Pvt. Ltd., model: JPP-50R, s.no: 164 01 13, cap: 8m³/hr,
8
size: 40x40mm, head: 10mtr, motor:
1.5H.P@1500rpm)

KROFTA SECTION consist of

• M.S constructed - Cylindrical Tank - Tank with Agitator with drive
motor with gearbox, Qty: 1no,  Skid mounted - Sliding Screen
( to ETP) - S.S. construction Screen, transfer pump with motor, Qty:
9 1no,
• M.S constructed - Square type Tank - 2nos of transfer Pumps with
motor, Qty: 1no,
• Skid mounted - HDPE Tank with Agitator Assembly with motor with
gearbox, Qty:
 KROFTA SECTION consist of
• M.S constructed - Cylindrical Tank - Tank with Agitator with drive
motor with gearbox, Qty: 1no,  Skid mounted - Sliding Screen
( to ETP) - S.S. construction Screen, transfer pump with motor, Qty:
1no,
9
• M.S constructed - Square type Tank - 2nos of transfer Pumps with
motor, Qty: 1no,
• Skid mounted - HDPE Tank with Agitator Assembly with motor with
gearbox, Qty:
1no,

Location: Infront of Workshop

10 • Waste Pulp / Broke Pulp Making Unit with Drive motor with pulley &
gears box, Qty: 1sec

COATING KITCHEN SECTION

consist of
• Skid Mounted - Pre-Coat SR Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - Pre-Coat ST Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox,
Qty: 1no,
• Skid Mounted - Top-Coat Vibro-Screen - M.S
constructed Vessels with vibrating & screen arrangements &
drive motor with gearbox, Qty: 1no,
• Skid Mounted - Pre-Coat Vibro-Screen - M.S constructed
Vessels with vibrating & screen arrangements & drive motor
with gearbox, Qty: 1no,
• Skid Mounted - Top-Coat ST Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - Top-Coat SR Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - Size Press Vibro-Screen - M.S constructed Vessels
with vibrating & screen arrangements & drive motor
with gearbox, Qty: 1no, Skid Mounted - Size Press SR Agitator - M.S
constructed Vessels with Agitator with drive motor with gearbox, Qty:
1no,
11
• Skid Mounted - Size Press ST Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - PVA Cooker Agitator - 1 - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - PVA Cooker Agitator - 2 - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no
 • Skid Mounted - Size Press Vibro-Screen - M.S constructed Vessels
with vibrating & screen arrangements & drive motor
with gearbox, Qty: 1no, Skid Mounted - Size Press SR Agitator - M.S
constructed Vessels with Agitator with drive motor with gearbox, Qty:
1no,
11 • Skid Mounted - Size Press ST Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - PVA Cooker Agitator - 1 - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no,
• Skid Mounted - PVA Cooker Agitator - 2 - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no
• Skid Mounted - Starch Cooker Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no
• Skid Mounted - Bottom SR Agitator - M.S constructed
Vessels with Agitator with drive motor with gearbox, Qty: 1no
• Skid Mounted - Top Coat ST Agitator - M.S constructed Vessels with
Agitator with drive motor with gearbox, Qty: 1no
• Skid Mounted - Top Coat Vibro-Screen - M.S constructed Vessels
with vibrating & screen arrangements & drive motor with gearbox, Qty:
1no,
Coating kitchen section with transfer pump - 4nos, steel supporting
structures, pipelines, valves, gauges & control system Others consist of
• Chemical PVC Barrel - 18nos,
• Material Lift (with wire rope hoist for lifting), Qty: 1no,
• Electronic Weighing Scale (make: Essae, model: DS215) (damage
condition) -
1no,

III COATED PAPER (DUPLEX BOARD) SECTION - Capacity: 80

TPD (app) (Paper size: 200 to 400GSM)

Skid mounted - M.S. Constructed Head Box with circulation pumps,

distribution pipelines for 8nos of Moulds, Qty: 1sec, Along with pressure
gauge and control valve and safety relief valves Forming (Mould) Section
- with Drive: Common drive unit using Propeller shaft, plumber block,
gearbox, Pulleys & gear wheels), Forming Section consist of Roller Former - 1,
2, 3, 4, 5, 6, 7 & 8 consisting of former drum, couch roll, felt rolls, return roll
12 & drainage element, Top & Bottom shower arrangements with pumps along
with Pneumatic loading, including Control Panel make: -,Forming Roll size:
1.25mtr (Dia) x 2.15mtr (Length), Qty: 8nos, (Mould - 1 to 8) each with
pump with motor Vacuum Pump with motor, Qty: 3nos, Vacuum Pump
with motor (1H.P.), Qty: 1no, Water Transfer Pump - 2nos M.S. constructed
Tank/Sump - 1no with 4nos of pump (1no found dismantled)
 Press Part Section
Press Part consisting of 3nos, of press section, pneumatically operated,
(Drive: Common drive unit using Propeller shaft, plumber block,
13
gearbox, Pulleys & gear wheels), Including Control Panel Each Press Part with
Evener Roll - 2nos & Pressing Rolls - 6nons, Suction Couch, Water separating
& collection tank, collection and recycling pumps

PRE DRYER PART consisting of

pneumatically operated with steam distribution line provision, control
valves, felt rollers, guide rollers (Drive: Common drive unit using
Propeller shaft, plumber block, gearbox, Pulleys & gear wheels) Pre-dryer
part consisting of 12 nos of cylinders, Top dryer cylinder – 5nos,
Bottom dryer cylinder – 7nos Make: JMC Water separation and recycling
unit
M.G (MACHINE GLAZED) cylinders section – Touch roll, pneumatic
control system, gearbox, Drive System ( Common drive unit
using Propeller shaft, plumber block, gearbox, Pulleys & gear wheels) Along
with Loading & Unloading arrangements, guide rollers, POST DRYER
SECTION - 1st Group - consisting of Dryer Cylinder - 8nos (Roller -
13 to 20), Pneumatic loading arrangements with Doctor Blade, guide
roll, stretch rolls, felt rolls, Gear drive motor with gearbox, make: NK, Top
dryer cylinder – 4nos, Bottom dryer cylinder – 4nos Qty: 1sec
Intermediate Roller Section consisting of Roller & common drive
system,
POST DRYER SECTION - 2nd
Group - consisting of Dryer Cylinder - 8nos (Roller - 21 to 28),
Pneumatic loading arrangements with Doctor Blade, guide roll, stretch
rolls, felt rolls, Gear drive motor with gearbox, make: NK, Top dryer cylinder
– 4nos, Bottom dryer cylinder – 4nos Qty: 1sec
Size Press Section consisting of Pneumatic operated type Press Roller &
guide roller with common drive system, Qty: 1sec Coating Section
14 consisting of 3nos of Coating Sections (Pre- Coater, Bottom Coater &
Top Coater ) including each with MCC & drive Control Panel
Pre-Coater Section consist of Rope Cylinder arrangements, Coating
Roller with guide rollers, Paper Drying & Cooling system & common drive
system, including control panel, Qty: 1sec
Bottom Coater Section consist of Rope Cylinder arrangements, Coating
Roller with guide rollers, Paper Drying & Cooling system & common drive
system, including control panel, Qty: 1sec
Top-Coater Section consist of Rope Cylinder arrangements, Coating
Roller with guide rollers, Paper Drying & Cooling system & common drive
system, including control panel, Qty: 1sec
POST DRYER SECTION (after
Coating section) - consisting of Dryer Cylinder - 3nos, Pneumatic loading
 system, including control panel, Qty: 1sec
Bottom Coater Section consist of Rope Cylinder arrangements, Coating
Roller with guide rollers, Paper Drying & Cooling system & common drive
system, including control panel, Qty: 1sec
Top-Coater Section consist of Rope Cylinder arrangements, Coating
Roller with guide rollers, Paper Drying & Cooling system & common drive
system, including control panel, Qty: 1sec
POST DRYER SECTION (after
Coating section) - consisting of Dryer Cylinder - 3nos, Pneumatic loading
arrangements with guide roll, stretch rolls, felt rolls, Gear drive motor with
gearbox,
make: NK, Top dryer cylinder – 2nos, Bottom dryer cylinder – 1no, Qty:
1sec
Hard Calendaring Section - 2 roll calendaring machine, with common
drive system with gearbox (make: Elecon, type: 9SNU), pneumatic
operated Roll loading & Unloading arrangements, including
control panel
Make: Dalian Mingzhu Machinery Co. Ltd., model: 2075, paper width:
2075mm, linear pr: 8.0Kgf/cm, speed: 250m/min, product no: 201098,
Qty: 1no,
Scanner - Quality Control

• Single Girder EOT Crane with

Electric hoist (make: Sigma), Cap: 10 M.T., box type, lifting ht: 7.5mtr,
span: 12.5mtr, make: -, Qty: 1no, Along with load lifting Beam (Loc: Paper
Mill - East)
15
• Single Girder EOT Crane with Electric hoist, Cap: 3 M.T., I- Beam type,
lifting ht: 7.5mtr, span: 12.5mtr, make: Vogal, s.no: 100202, Qty: 1no,
Along with load lifting Beam
(Loc: Paper Mill - East)

IV Location : Finishing Section

 Slitting Machine (Cutter - 01 & 02) with drive motor, finished reel, Idler
rollers & Guiding roller, Trimming arrangements, hydraulic reel un-
loader & sheet table attachments & all accessories &
16 connection including control panel & Festo Drive control unit (make:
Erhardt+Leimer EL, type: SG4411 PB, s.no: 2012-09-582)
Make: WEB Converter (India)
Ltd.,

Re-Winder Machine with drive

motor, finished reel, softness rewind, Twin Drum with drum brake with
17 pneumatic clutch, rollers & Trimming arrangements, hydraulic
reel un- loader & Ejector attachments including control panel,
make: -, Qty: 1no,

Single Girder EOT Crane with Electric hoist, I-Beam type, make: -,
18 Qty: 1no, Along with load lifting Beam - 1no,
(Loc: Finishing Area)
 Reciprocating type Air Compressor with Air receiver, drive motor
Make: Elgi Equipments Ltd., model: SS03E, fab.no: DJJLT10007,
19 cap: 203Lpm, Air
Receiver Cap: 160Ltrs, wr. Pr:
12Kgf/cm²

Location: Dispatch Shed

• Paper Cutting Machine (Sheet) with roller & cutting blade
arrangements with belt drive motor, including sizing Table & Paper Roller
stands,
Qty: 3nos
• M.S. constructed - Pallets (size: 1mtr x 0.5mtr), Qty: 150nos (app.)
20 (in entire plant)
• Diesel Operated type Fork Lift Machine (damage & dismantled
condition), Make: Malati Machines Pvt. Ltd., model: CPC025, s.no: 1019,
cap:2500Kgs, chassis no: 12040923, lifting ht: 3000mm, load
center: 500mm, Qty: 1no,
• Electronic weighing scale
(damage) - 1no,
 Loc: QCS Room
• DCS Termination Panel - 1no,
• Control Panel (make: METSO, Project no: 271011, HW: 161,
ACS1/AMS1/AP01), Qty: 1no,
• UPS - 1no with 12V 160aH Amaran make Batteries (available in Lab)
• Split type Air conditioner (make: Bluestar), Qty: 2nos,
Loc Instrumentation Department
• Split type Air conditioner (make: Bluestar), Cap: 1Ton, Qty: 1no,
Loc: Lab
• Hot Air oven (model: TC-303)
21 - 1no,
• Degree Deflection Stiffener - 1no,
• Bursting Strength Tester (make: Econo-Tech), Mullen type, Qty:
1no,
• Photo Electric Digital Timer - 1no,
• Electric Bunsen (make: Guna Enterprises) - 1no,
• Servomax make Stabilizer Unit - 1no,
• Electronic Voltage Stabilizer (make: Pearl Power Pack) - 1no,
• Digital Weighing Scale (make: Essae, model: DS-
852) - 1no,

Vehicles consist of
• Tractor with Top Hood (Reg.No: NIL), Make: Massey Ferguson, Qty: 1no,
(damage &
condemned condition) (Loc: Near Workshop)
• Tyre Mounted (2-wheel) - M.S constructed Tank (cap: 5000Ltrs
(app.)) with Centrifugal Pump operated by Kirloskar make Oil Engine,
Qty: 1no,
• Tractor with Top Hood (Reg.No: NIL), Make:
22 Sonalika, model: DI-750-III RX, Qty: 1no, Along Hydraulic operated type
Material Loader attachments, Qty: 1no,
(Loc: Hi-con & Medium Con Conveyors)
• Tractor with Top Hood (Reg.No: NIL), Make:
Massey Ferguson, Qty: 1no, Hydraulic operated type Trailer (2- wheeler),
Qty: 1no,
(Loc: Near Coating Kitchen
Section)
 Wood Fired - STEAM BOILER –
6.0 Tonnes/hr with Water wall, Wood chips feeding system (Pocket
Feeding with 3nos of screw conveyor) & bucket elevator, shell and
tube steam boiler with all connected system, with steel chimney, water
feed pumps, pipe lines, steam line with insulation, IBR instruments &
controllers, fan, Steel chimney and other accessories
23 Boiler make: Veesons Energy Systems Private Limited, model: RFS,
Capacity: 6.0 Tonnes/hr, Output: 6000 Kgs/hr, S.no: VBR- 119, Wr. Pr:
130Psi,
Also including M.S constructed skid mounted feed water tank, high
pressure Feed pumps - 2nos, I.D Fan - 1no, F.D Fan - 1no, and
Steel supporting
structure,

Wood Fired - STEAM BOILER –

5.0 Tonnes/hr with Water wall, Wood chips feeding system (Pocket
Feeding with 3nos of screw conveyor) & bucket elevator, shell and
tube steam boiler with all connected system, with steel chimney (ht: 72ft
(app.)), water feed pumps, pipe lines, steam line with insulation, IBR
instruments & controllers, fan, Steel chimney and other accessories
24 Boiler make: Veesons Energy Systems Private Limited, model: BPS,
Capacity: 5.0 Tonnes/hr, Output: 5000 Kgs/hr, S.no: VBR- 149, Wr. Pr:
150Psi,
Also including M.S constructed skid mounted feed water tank & Steam
condensate tank, high pressure Feed pumps - 2nos, I.D Fan - 1no, F.D Fan
- 1no, and
Steel supporting structure,

Skid mounted - M.S. Constructed

- Fully insulated type Steam Condensate Tank, with steel supporting
25 structure
Indicators, including pipelines
throughout factory, gauges, valves and other instruments,
 R.O (Reverse Osmosis) Plant Skid mounted R.O Plant including 2nos of
Filter Membranes, Cartridge Filter, High Pressure Pump (with motor:
30H.P.),
Chemical Dosing system with transfer pump, pressure gauges,
M.S. Constructed Filters - 2nos, with Inter connecting Pipe lines, fittings
and connected accessories, including control panel
R.O. Plant Tanks including HDPE Tank (cap: 5000Ltrs) - 3nos, with
transfer pump with motor including Monoblock pump (5H.P.) - 1no,
26
R.O. Tank transfer pump (5H.P.) - 1no, Raw Water Pump (5H.P.) - 1no,
Mixed Bed Vessel,
WATER SOFTENING PLANT (
D.M WATER PLANT ) consisting of Skid mounted - M.S. Constructed
DM Water storage Tank, Multistage DM Transfer Pump, Multistage
DM Transfer pump, Submergible type Raw Water Pump, Feed water
pump,
filters tank,

Skid mounted - M.S. Constructed

27 - Fully insulated type Steam Condensate Tank, with steel supporting
structure and its accessories ndicators, including pipelines
throughout factory, gauges, valves and other instruments,

Others
• Hydraulic operated type Wood Splitter Machine with Hydraulic
28 Power Pack with motor, Qty: 1no,
(Loc: Near R.O. Plant)
• S.S. Pipes - 9nos ( Loc: Near Coating kitchen)

VI COMPRESSORS
 • Packaged type Air Compressor with air dryer, air receiver &
all other accessories & connections Make: ELGI Equipments
Limited, model: EG22-7.5, s.no: BJIS031866, cap: 3.57
m³/hr, working pr: 7.0kg/cm², power: 22 KW, year: 2010, Qty:
1no,
• Packaged type Air Compressor with air dryer, air receiver &
all other accessories & connections Make: ELGI Equipments
Limited, model: EG22-7.5, s.no: BJIS031191, cap: 3.57
m³/hr, working pr: 7.0kg/cm², power: 22 KW, year: 2009, Qty:
29 1no,
• M.S. Constructed - Vertical type Air receiver tank capacity: 1000
Ltrs, make: ELGI, fab.no: BO9V0654, year: 2009, Qty: 1no,
• Motor with Bed & gearbox (Rusted condition) - 1no,
• (Location: Power Room) - Refrigerated type Air Dryer, make: ELGI
Equipments ltd., cap: 191CFM, model: ELRD- 191, s.no: 9780-12/09,
power: 1.2KW, Qty: 1no, Including Pneumatic pipelines throughout the
factory, valves,
gauges & other instruments

EFFLUENT TREATMENT PLANT

Effluent Treatment plant consisting of Pumps, motors, agitators
for classifiers, circulating pumps & Discharging pumps, weighing scale
& mixing
hopper and all accessories, Raw Water circulation Pumps - 3nos,
RCC Primary clarifier tank - 1no with pump, Agitator (with motor &
gearbox) - 1no,
30 RCC Secondary clarifier tank - 1no with pump, Agitator (with motor &
gearbox) - 1no,
M.S. Constructed Filter Tank - 2nos,
RCC Aeration tank - 1 & 2 with 2nos of transfer pump, Qty: 2sec,
Transfer Pumps - 3nos,
Back Water Agitator with motor & gearbox & 2nos of transfer pump Overflow
back water tank with agitator with motor & gearbox,
2nos of Pumps with motor

VIII OTHERS
 Plat Form Type Vehicle (Lorry) Electronic Weighing Scale (BRIDGE),
Capacity: 40 M.T,
31 Make: Essae, model: TM950, Platform size: 10ft x 30ft
Along with Dead Weight Stones (each 20Kg) - 45nos,
UPS - 1no with 5nos of Batteries (make: Surya Tubulars, 75aH)

Back Side of Godown

• M.S frame, size: 3ftx 9.5ft, Qty: 5nos
• Material stand using channels & angles, S.S. Pipe, PVC Pipe,
32 M.S. Pipe, Qty: 1lot
M.S. Angle - Frame (size:12ft x 3ft), Qty: 8nos
S.S/M.S Bin:3nos & Pump
Case - 1no
 Workshop Machineries:
• Bench Grinding Machine with double head grinding wheel & drive motor
- 1no,
• Cutting blade Sharpener Machine with holding stand & 2nos of
motors, Qty: 1no
• Power hacksaw Machine, with drive motor, Qty: 1no
• Center Lathe Machine - 4ft with Job holding Jaw Chuck, belt drive
motor & other attachments, make: Radhika steel industries, Bed Length:
4ft, drive motor: 2H.P., Qty: 1no,
• Center Lathe Machine - 16ft with 4-Jaw Chuck, Length job holding
attachments, Drive motor & other attachments, make: Radhika
steel industries, Bed Length: 16ft, drive motor: 3H.P., Qty: 1no,
• ‘A’ frame - with Hand operated type Chain Pulley Block ( CPB),
33
make: Indef, Cap: 5.0 Ton, Qty: 1no,
• Pillar type Drilling Machine with drive motor (1.0KW) - 1no,
• Stand with pipe wrench - 1no,
• HDPE tank (cap: 2000Ltr) - 1no,
• Welding transformer - 1no, Greasing Machine - 1no , M.S. Oil Barrel
with Oil - 1no,
• Pumps with motors, Gearboxes, Pulleys, blocks, bushes, Roller-
3nos, Plumber blocks, Impeller, Tools & tackles, Shafts, S.S pulleys,
Qty: 1lot,
• Steel working table - 1no,
M.S tools rack with tools - 1no, M.S. frame - 1no,
• Split type A.C - Out door unit
(make: Blue star) - 1no, ,

IX ELECTRICAL INSTALLATIONS AND

FITTINGS
 ELECTRICAL INSTALLATIONS
AND FITTINGS Consisting of M.V., MCC, SSB, LSB panel
boards, Automatic power factor panels, controllers, U.G. Cables (H.T. &
L.T.) throughout factory, motor controllers, switches, bus bars ducts,
Earthing materials, electrical fittings and others
A.C. Variable Frequency drives unit – 1lot,
2 - Pole structures with Outdoor VCB Panel (make: Megawin Switchgear,
Cap: 800Amps, 11KV) - 1no,
Location: Power House Capacitor Bank Panel - 1no
LSB Panel - 1no, SSB Panel (SSB
- 01) - 1no,
M.V Panel - 01 with incoming (without ACB Unit) (2500Amps), outgoing
switches 800Amps - 7nos, 400Amps - 1no, Busbar
coupler unit Switches 800Amps - 5nos, 630Amps - 2nos, 125Amps
- 2nos, 400Amps - 2nos,
RTCC Panel for Transformer (1600KVA) - 1no,
Motors (with different ratings) - 52nos, Geared motor - 1no, Pump with
motor - 2nos, Capacitor Bank Panel - 1no,
MV Panel - 02 with Incoming ACB Unit (rating: 1600amps, make:
Siemens) & outgoing switches - 800Amps - 8nos, 630Amps - 2nos
Integrated type RTCC panel (for Transformer - 02), model: STD- 04, make:
P.E. Systems Pvt. Ltd., Qty: 1no,
HT Panel Section
VCB Unit, make: Megawin Switch Gears, Outgoing - 01 - rating: 12KV,
25KVA, 800amps DO type VCB, CT ratio: 100/5A,
Incomer : rating: 12KV, 25KVA, 800amps DO type VCB, CT ratio: 150/5A &
Outgoing - 02 - rating: 12KVA, 25KVA, 630A LBS O/G-
02
MCC-01 Panel board with Incoming switch 800amps from MV Panel
& Outgoing switches - 63Amps (for Top press screen - 25HP), 63Amps
(for Top hydro pulper -75HP), 63Amps (for Top load transformer pump -
30HP), 63Amps (for Bottom TCC-10HP), 63Amps (for Top collection chest
pump-25HP), APFC-25KVAR,
63Amps (for P/L collection chest agitator-15HP), 63Amps (for Top Refiner
chest agitator -15HP), 63Amps (for P/L machine chest agitator -15HP),
 Incomer : rating: 12KV, 25KVA, 800amps DO type VCB, CT ratio: 150/5A &
Outgoing - 02 - rating: 12KVA, 25KVA, 630A LBS O/G-
02
MCC-01 Panel board with Incoming switch 800amps from MV Panel
& Outgoing switches - 63Amps (for Top press screen - 25HP), 63Amps
(for Top hydro pulper -75HP), 63Amps (for Top load transformer pump -
30HP), 63Amps (for Bottom TCC-10HP), 63Amps (for Top collection chest
pump-25HP), APFC-25KVAR,
63Amps (for P/L collection chest agitator-15HP), 63Amps (for Top Refiner
chest agitator -15HP), 63Amps (for P/L machine chest agitator -15HP),
63Amps (for Top Refinery chest pump -30HP), 100Amps (for Top SCC
pump- 30HP), 100Amps (for Top HCH30 screen motor-30HP), 32Amps (for
APFC-5KVAR), 32Amps (for Top m/c chest pump-15HP), 32Amps (for
Top stock chest pump -10HP), 32Amps (for Top vibration screen-3HP),
32Amps (for P/L TDR dosing pump-2HP), 32Amps (for H.P Pump-15 HP),
32 Amps (for Top Rotary thick near motor-5HP), 32Amps (for
Top convears-5HP) MCC-02 Panel board with Incoming switch
800amps & Outgoing switches - 630Amps (for P/L Transformer),
200Amps (for P/L hydro pump (75HP), 200Amps (for P/L collection
pump (60HP)), 200Amps - (for P/L HCH30 screen pump -30HP), 63Amps
( for P/L collection chest pump-30HP), 63Amps (for Bottom & filler
chest colletion- 15HP), 63Amps (for Top collection Chest Agitator-
15HP), 63Amps (for P/L machine chest colletion-15HP), 63Amps (for Top
sealing water pump -20HP), 63Amps (for P/L machine chest pump -
15HP), 63Amps (for B/L dump chest pump -15HP), 63Amps (for P/L
sealing water pump -20HP), 63Amps (for Chemical pump (PL, TDR)-
10HP), 63Amps (for 2KVA APFC),
63Amps (for P/L TCC-5HP), 32Amps (for P/L SCC pump- 10HP),
32Amps (for P/L vibrating Screen-3HP), 32 Amps (for
Starch agitator south-2HP), 32Amps (for T/L Pulper pulp mill dosing),
Mould blower-25HP
MCC-03 Panel with Incomer:800Amps from MV Panel &
Outgoing Switches for 250Amps (for CH.5 bottom.60HP) &
63 Amps (for APFC 25KVAR x 2nos), 125Amps
- 5nos (for bottom turbo 500- (bottom& filler), HCH60-60HP, Bottom &
34
filler pr screen motor(back water board pump)- 50HP, Top PCC pump
motor-60 HP, Bottom & filler pump-50HP & B/L transformer prister-30HP),
63Amps - 10nos (for P/L chest aditator-15HP, Top stock chest agitator-
15 HP, Top thick near agitator-15HP, P/L thick near agitator-15HP,
Bottom machine chest agitator- 20HP, Filler machine chest agitator-
20HP, Filler machine chest pump- 20HP
, P/L machine chest conceders valves , P/L pressure screen motor- 30
HP, High press pump- 25 HP(Near), 32Amps - 9nos (for
Bottom & filler reject screen Diapola, APFC-5KVA, B/L machine
pump-10HP, P/L thick near chest pump-10HP, Top thick near chest Pump -
15HP, Starch agitator ( pulp mill skill )-1HP, B/F vibration screen-5HP,
B/F converse & APFC 8KVA+5KVA MCC - 3A Panel Board - Incoming from SSB -
01 with switches for B/L & F/L PCC Pump (100H.P.),
Drainage pump (10H.P.), BL thickener Shower (motor: 5H.P.), P/L Rotary
Thickener (5H.P.), B/L & F/L Sealing Water (40H.P.), P/L Refinery Chest
Pump, B/L Transfer Pump West (30H.P.), B/L & F/L SCC Pump
(20H.P.), P/L PCC Pump (60H.P.),
Auto Float Control Supply from LDB-9
MCC-04 Panel with Incomer:800Amps from MV Panel &
Outgoing Switches for 315Amps (for Pulper motor-150 HP), 315Amps
(for Top TDR - 150HP), 315Amps (for Bottom filler pulper-120HP),
MCC-05 Panel Board with switches for Vacuum pump (cap: 120HP) -
3nos, (Cap: 175 HP) -
1no, (Cap: 275HP) - 1no, Fresh Water Pump (5HP), Chemical spray
pump, F/L mould back water (10HP), Edge cutter, Couch Pit Pump
(20HP), EOT Crane, HP back water pump (60 HP), Shower Panel, B/F Pressure
screen Rejection Pump (10HP) - 1no, Top mould back water (10HP),
Low pressure pump (15 HP), Scan cooler near pope reel, Vacuum Separate
Pump - 3 (5HP), M.G oscillation-1no, Vacuum pump - 4 (5HP),
Vacuum Separate Pump - 3 (3HP), B/F Pressure Screen Rejection
pump - 2 (10HP),
MCC-07 with 800Amps switch Incoming from M.V. Panel - II and
Outgoing switches for Mould Pressure Screen (30HP) - 7nos, Air
compressor - 2 (30HP), 125Amps for Couch Pit Agitator, Mould fan
pump - 7 (30HP), Mould fan pump - 1 to 6 (40HP) -
(20HP), EOT Crane, HP back water pump (60 HP), Shower Panel, B/F Pressure
screen Rejection Pump (10HP) - 1no, Top mould back water (10HP),
Low pressure pump (15 HP), Scan cooler near pope reel, Vacuum Separate
Pump - 3 (5HP), M.G oscillation-1no, Vacuum pump - 4 (5HP),
Vacuum Separate Pump - 3 (3HP), B/F Pressure Screen Rejection
pump - 2 (10HP),
MCC-07 with 800Amps switch Incoming from M.V. Panel - II and
Outgoing switches for Mould Pressure Screen (30HP) - 7nos, Air
compressor - 2 (30HP), 125Amps for Couch Pit Agitator, Mould fan
pump - 7 (30HP), Mould fan pump - 1 to 6 (40HP) -
6nos, Spare 125Amps switch - 1no, Air compreser-1 (30H.P.), MCC-08 Panel
Board - 800amps incoming from SSB-02 and outgoing switches - 250A -
3nos, Dispersal motor (63HP) - 2nos, Coating kitchen - 1no, Capacitor bank
(100Amps)-1no, Power banking capacitor
MCC-08 Panel with 250Amps switch for Incoming and outgoing
switches - 125Amps - 4nos (for Broke pulper (30HP), Paper Passing
Roll Drive & Coating Machine), 32Amps - 4nos (for Pressure
screen rejection pump, Top Load P/L- 7.5HP), Coating rope carries
drive & 63Amps - 2nos (for Broke pulper pump(20HP) & New vacuum
sealing water pump (10H.P.)
MCC- 09 Panel - with Switches for Main fresh pump (15H.P.), P/L Pulper
Back water pump (10H.P.), Krofta Feed Pump - 1&
2 (40H.P.), Fresh Water Pump (3H.P.), Machine Back water
pump (25H.P.), M.S. Tank motor (15H.P.), Broke Pulper use motor (10H.P.)
HT Panel Section
Motor - 12nos, Pump with motor
- 1no Rotor - 1no,
Split A.C Outdoor Unit - 1no, Split A.C Indoor Unit - 1no, make: Blue
Star, outdoor A.C. Radiator with compressor-1no Transformer Section -
Siemens make motor - 4nos, Motor with Pump (centrifugal) , motor -
8nos, Rotor - 1no, Pumps, Pulleys, Submergible pumps - 2nos,
Electrical focus light - 1lot,Panel, make: ABB -1no
T.N.E.B Service connection HTS.C.No: 302 & 1, dt: 20.02.2008,
sanctioned demand: 2300KVA, MF: 4000, CT ratio:
200/5A.
 DRIVE CONTROL PANELS
including
Main Drive Panel - VFD, make: ABB, Qty: 1no,
M-214 Disperser motor - 1, make: ABB, Qty: 1no,
M-214, Disperser motor - 2, make: ABB (No drives)
Cutting Machine - 2 - Drive panel with ABB make drive (15HP) also for
conveyer motor (5HP), Rewinder (25HP) Panel without drive
35 Duplex cutter panel, make: ABB (without drive) and also for conveyer
motor,
Cutting machine - 1 Drive panel make: ABB and also for with conveyer
CP-1 Electrical starter panel - 1no,
Thermo couples (range: 0- 350°C, length: 1000mm) - 3nos, Thermo
couples (range: 0-80°C, length: 1000mm) - 1no & others, Split A.C (make:
Bluestar) with
stabilizer, Qty: 2nos

Location: Power Room

• Motor: 30HP@960rpm, Qty: 1no
• Motor Make: ABB, 50HP,1470rpm, , Qty: 1no
• Motor motor:25HP (Siemens),
, Qty: 1no
• Motor Make: ABB, cap: 60HP, 30KW, 45KW, 40HP, Qty:
4nos,
36 • Motor Make: Siemens, cap: 20HP, 15KW, Qty: 2nos,
• Motor (Siemens) - 20HP, Qty: 1no
• Motor make: Siemens, Qty: 2nos,
• Motor make: Siemens, cap: 10HP -1no,
• Motor Make: ABB, cap:20HP, 15HP, 15HP, Qty: 3nos,
• Motor make: cap:15HP, Qty: 1no,
• Industrial sweeping Machine -
1no,
 STOCKS ROOM (New Power Room)
• Multistage Pump with motor- 1no, Multistage Pump - 12nos
• Pneumatic Actuators, Industrial Blower Fan (make: Vintech,
model: VR5LL 7, S.no: 07084619, with motor:7.5HP@2850rpm) -
1no,
• Pulleys, Blocks, Connecters,
37
and other loose items, Qty: 1lot,
• M.S. Barrel with oil, M.S. shaft - 1no,
• Electrical fitting, Bay Light, Street Light, Aluminum flats, Tube light
fittings, Qty: 1lot,
• HDPE Tank (cap: 1000Ltr) -
1no,

POWER TRANSFORMER: 1600

KVA, with Bus Bar system & all other Connections, make: Crompton
Greaves, s.no: DT1460/1, volts at H.V: 11000 & L.V: 433 volts, Amperes
at H.V:
38 84.0 & L.V: 2133.4 amps, ratings: 1600KVA, 3P, 50 Hz, type of
cooling: ONAN,
Along with OLTC, make: ON Load Gears, type: ABB 111 200 12 17
17 0, s.no: 18826, year: 2007,
no. of steps: 17, 171V
 POWER TRANSFORMER: 800
KVA, make: Universal Power Transformer Pvt. Ltd., s.no:
OKDB042/0001, volts at H.V: 11000 & L.V: 433 volts, Amperes
39 at H.V: 42.0 & L.V: 1066.7
amps, ratings: 800KVA, 3P, 50 Hz, type of cooling: ONAN,
Along with OLTC, make: ON Load Gears, type: ABB 111 200 12 17
17 0, s.no: 24582, year: 2010,
no. of steps: 17, 137.5V

Power Generator (Closed) - D.G. set with Acoustical enclosures,

M.S. Oil storage Tank, Battery connection, connected cables, Capacity:
100 KVA,
Alternator (A.C. Generator) Make: Kirloskar Oil Engines Limited,
40 s.no: 22S3L007F38141, Frame: KG225L, Cap: 100.0
KVA, rating: 139.1Amps, 1500 RPM, 415V, 3P,
Engine: Kirloskar Oil Engines Limited , engine model: 6R1080T,
Engine no: 6H.34010700167, rating:
93.5KW/127 H.P.@1500rpm,
UIPMENTS

Qty in No s.

1 Sec

1 Sec
 1

1 Lot
1 Lot

1
1 Nos

1 Sec

1
 1

1 sec

1 Sec
1 Sec
1 Sec

1 Sec
2
 2

1 Sec

1 Sec
 1

1 Lot
1 Lot
1 Sec

1 Sec
1 sec

1 Sec

1 Sec
1 Sec

1 Sec
 1

1 Lot
1 Sec
1 Sec
1 Sec

1 Lot
1 Lot

1
1