Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

MSDS Dev25

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MATERIAL SAFETY DATA SHEET (MSDS)

Ceramic Balls Manufactured by Devson Catalyst Pvt.Ltd

01 Product and Chemical Name : Not Available


Chemical Name Trade Name : Ceramic Balls
and Synonyms: Aluminum Sillicate. Ceramic Balls.
Company Manufacturer: Devson Catalyst Pvt.Ltd.
Identification Plot No: 214,GIDC Phase-II, Ambawadi, Wadhawancity-363035.
Dist Surendranagar, Gujarat. India.
Place Of Origin : India.
02. Chemical CAS # Component Percentage
Composition 60676-86-0 sillica Max 80.00
1344-28-1 Aluminum Oxide 20 to 26
12136-45-7 Potassium Oxide 2 to 3
1313-59-3 Sodium Oxide 1.3 to 1.8
1309-48-4 Magnesium Oxide 0.5 to 1.2
1309-37-1 Iron Oxide 0.4 to 0.8
13463-67-7 Titanium Dioxide 0.5 to 1.0
1305-78-8 Calcium oxide 0.5 to 1.1
03. Physical Data • Physical State : Solid • Appearance : Balls. (Spherical).
• Odor : Odorless • Boiling point 0C : Not Applicable.
0
• Melting Point C : Not Applicable • Freezing Point : Not Applicable • Solubility in Water : Insoluble.
•Specific Gravity : 2.2 to 2.4 gm/cc
NFPA Hazard HMIS Hazard Rating System
codes codes
Health 1 Health 1 0 = No Hazard 3 = Serious Hazard
Flammability 0 Flammability 0 1 = Slight hazard 4 = Severe hazard
Instability 0 Reactivity 0 2 = Moderate Hazard
04. Hazard *Hazardous Polymerization: Will not occur.
Identification * Reactivity Data: 1. Chemical Stability : Stable 2. Incompatibility with other material: Not
Data Applicable 3. Reactivity: Not Applicable 4. Hazardous reaction products: Not Applicable.
* Health Hazard data :
1. PRIMARY EXPOSURE ROUTE : Suspended solid particles in inhaled air
2. PRECAUTIONS IN USE : Eyes, nose and throat may be irritated by dust.
3. Threshold Limit Value : 10 mglm (nuisance particulate)
* Non- hazardous, non-poisonous and non-Inflammable. No special precautions are therefore required
While Transporting, Handling& Loading of the material.
05. Fire & Explosion * Flammability: No. Not flammable.* Auto-ignition temperature : Not Applicable.
Measure *Fire Fighting: Cool fire – exposed containers with water spray.

06. Stability And *Stability : Stable Under Normal Condition of Use.*Condition of Reactivity : Hazardous
Reactivity polymerization will not occur.*Hazardous Decomposition Products: N/Ap
*Incompatible Materials: N/Av
07. Accidental Personal Precaution: Do not breath dust. Avoid contact with eyes.
Release Enviromental Precautions: This product does not present any particular risk to the environment
Measure :
08. Emergency and Fire Extinguishing Media: All extinguishing agents can be used. Ceramic materials do not present any

1
First Aid : particular risk in the event of a fire. Use media appropriate for surrounding fire.
Product ingestion is unlikely to occur if proper safety/hygiene procedures are followed.
Skin Contact: Wash affected areas with soap and water. If irritation developed, Obtain medical
attention.
Eye contact: Immediately rinse with plenty of water for a prolonged period (at least 15 minutes) while
keeping the eyes wide opens. If necessary obtain medical attention.
Ingestion: Rinse mouth out with water. If necessary obtain medical attention.
Inhalation: Remove affected person to fresh air. If respiratory problem Develop, obtain medical
attention.
Spills: No special precaution.
09. Usage : It is used as absorbent, as catalyst and as catalyst support.
10. Handling & Does not require any specific or particular measure.
Storage: HANDLING : Avoid contact with skin, eyes, and clothing
Avoid breathing product vapors and mists. Do not take internally
Wash thoroughly after handling this material.Use this material only with adequate ventilation
Storage :To guarantee the quality and properties of the product store in tightly closed, protected from
humidity and bad weather bad condition and properly labeled containers. Avoid formation of dust.
11. Exposure No specific measure required provided the product is handled accordance with the general rules of
Controls occupational hygiene and safety.
Personal Respiratory protection: use respiratory protective device with particle filter while handling of large
Protection: quantities of product.
Skin Protection: Use gloves to avoid prolonged or repeated skin contact.
Eye protection: safety glasses or goggles as necessary to prevent eye contact.
12. Toxicological Local Effect: Slightly irritating to the respiratory system. The dust is irritating to the eyes.
Information : • IMMEDIATE EFFECT: No • CARCINOGENICITY : No • MUTAGENICITY : No
• EPIDEMIOLOGY : No • TERATOGENICITY : No • REPRODUCTIVITY : No
• NEURTOXICITY : No
13. Ecological No effects are expected from this material which as supplied is considered “”.
Information :
14. Transportation D.O.T. SHIPPING NAME : Not D.O.T. regulated D.O.T. HAZARD CLASS : None
Information DOT ID NUMBER : UN N/AP DOT PACKING GROUP : None DOT RQ : N/AP
OTHER : Labels required: None
IMDG HAZARD CLASS : None ICAO HAZARD CLASS : None
* Non- hazardous, non-poisonous and non-Inflammable. No special precautions are therefore required
While Transporting, Handling& Loading of the material.
15. Disposal Dispose of according to national and local regulations. Material is not classified as hazardous,
consideration dangerous or toxic. Approved landfill sites can be used.
16. Other Abbreviations
Information N/Av: not available N/Ap: not applicable
The information and recommendations set forth herein are presented in good faith and believed to be correct as of
the date of this MSDS.Devson Catalyst Pvt .Ltd. makes no representations as to the completeness or accuracy
thereof, and information is supplied upon the express condition that the persons receiving same will be required to
make their own determination as to the suitability for their purposes of use. In no event will .Devson Catalyst Pvt
.Ltd .be responsible for any damages of any nature whatsoever resulting from the use of, reliance upon, or the
misuse of this information.
This information is supplied simply to be informative and to alert the user of the material. The ultimate compliance
with federal, state, and/or local regulations concerning the use of this material, or compliance with respects to
products liability, rest solely upon the purchaser thereof.

You might also like