My 15 Space Master Manual
My 15 Space Master Manual
My 15 Space Master Manual
Space Master
I. Adjust the roulette
After turning on the machine, the roulette will rotate 1 or 2 laps to test if the
motor and the sensor function well. If they function well, the Diamond of the
roulette will stop below the light pointer. If not, it means the roulette was not
installed properly, it must be re-installed and tested until it functions well,
otherwise it will affect the accuracy of winning.
II. Check account
Press and hold K1 of the IC board, and turn on the machine. Then press START.
IV. Troubleshooting
Error Codes Problems
11 No coin to charge.
22 The sensor of motor or the motor is broken.
33 The coin selector is broken.
44 The switch of hopper (sensor of coin counter) is broken.
55 The switch of key out or the counter is broken.
66 The RAM is broken.
77 The profit of the machine is out of range. Please reset the machine.
95 The series number of IC chip is wrong.
99 Lost of RAM or it’s under interference. Please reset the machine.
2
IV. Adjust the dip switch
1. Adjust the setting
Press and hold K4 of the IC board (back), and turn on the machine. You can
follow the rules as below, and then check on the front of IC board.
2. Description
Part A shows the maximum of profit and the screen will appear 77 with alarm if
player’s profit exceeds this range.
Part B shows if it is able to key in or not. 01 means key-in function is workable,
and 00 means not.
Part C shows the increased value, which is 100 or 200, for each key-in.
Part D shows the increased value for each inserting coin.
Part E shows the winning percentage.
Part F shows winning percentage of Double.
Part G shows the serial number of main program.
3
Default Setting
Dip Switch 1 2 3 4 5 6 7 8
YES ON
The function of KEYIN
NO OFF
200 ON
The amount of KEYIN
100 OFF
The winning 85% ON
percentage of Double 80% OFF
85% OFF OFF OFF
86% OFF OFF ON
87% OFF ON OFF
The winning 88% OFF ON ON
percentage 89% ON OFF OFF
90% ON OFF ON
91% ON ON OFF
92% ON ON ON
1 OFF OFF
2 OFF ON
The setting of Coins
5 ON OFF
10 ON ON
4
V. Wiring
JP1 JP2 JP3 JP4
N.C./ 1 VCC(+5V) SIGNAL OF COUNTER 1
1
1 BILL ACCEPTOR 2 VCC(+5V) (INPUT) 2
SIGNAL 3 GND SIGNAL OF COUNTER 3
2
2 GND 4 GND (OUTPUT) 4
3 GND 5 SSR 3 N.C. 5
KEYBOARD
4 N.C. 6 +12V 4 N.C. 6
N.C./ COIN SELECTOR 7
5
5 BILL ACCEPTOR +12 V 8
(12V) COUNTER (OUTPUT) 9
6
6 HOPPER SIGNAL +12 V 10
7 KEY OUT 7 SPEAKER (+)
8 KEY IN 8 SPEAKER (—)
N.C/
9 CONTROL WIRE 9 COIN SELECTOR SIGNAL
OF BILL ACCEPTOR 10 GND
10 HOPPER (+5V)
JP7
1 PARTY-LINE 1★
2 PARTY-LINE 2◎
3 WIN◎
4 START◎
5 DOUBLE RIGHT◎
6 DOUBLE LEFT◎
7
8 PAY◎
9
10 APPLE★
11 ORANGE★
12 LEMON★
13 BELL★
14 CREDIT◎
15 BAR★
16 77★
17 STARS★
18 WATERMELON★