Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Çimsa Eco White TDS (EN)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ECOWHITE

TECHNICAL DATA SHEET

1 GENERAL INFORMATION 6 CHEMICAL FEATURES


Çimsa Eco White Cement (CEM II/B-L 42.5R) is one of Standart Limits
Features Çimsa (EN 197-1)
the cements with high whiteness. It is an environmentally Values
friendly cement with low clinker amount due to the marble Min. Max.
in its content. Insoluble Residue 0.12 % - -
SiO2 17.50 % - -
The advantages offered by Çimsa Eco White Cement to Al2O3 3.30 % - -
Fe2O3 0.21 % - -
the Applications;
CaO 63.50 % - -
· High whiteness, MgO 1.15 % - -
· Low CO2 emission, SO3 2.80 % - 4.0
Ignition Loss 11.5 % - -
· High durability, Na2O 0.25 % - -
· Low alkali content, K2O 0.27 % - -
Chlorine (CI) 0.0080 % - -
· High volume stability. Free CaO 1.80 % - 0.1

2 APPLICATION AREA 7 PHYSICAL AND MECHANICAL FEATURES


Çimsa Eco White Cement application areas are; Standart Limits
Features Çimsa (EN 197-1)
· Construction chemicals production, Values
Min. Max.
· Glass fibre-reinforced concrete production,
Specific Gravity g/cm 3 3.00 - -
· Terrazo tile production, Blaine cm 2/g 5500 - -
· Exposed concrete. Whiteness Y 86.5 % 85.5 90
Vicat İnitial Set Minute 110 60.0 -
Vicat Final Set Minute 135 - -
3 PRODUCTION Water Volume 28.6 % - -
Stability (Le Chatelier) mm 1.0 - 10.0
Stability is the focal point of the Çimsa production Residue at 45 (microns) 1.5 % - -
plants and the variability in the product parameters is Residue at 90 (microns) 0.1 % - -
minimized by the controls at each stage during the Compressive Strength (7 days) MPa - - -
Compressive Strength (28 days) MPa 49.0 42.5 62.5
process from raw material to delivery. Production
processes are certified according to EN ISO 9001 and 8 QUALITY CONTROL
EN ISO 18001 standards.
Çimsa Eco White Cement is subject to quality control
4 PHASE COMPOSITION conforming to EN 197-1 standard. It is presented to
foreign markets with CE certificate.
Main mineral Phases : C 3 S, C 2 S
9 SAFETY INSTRUCTIONS
Auxiliary Mineral Phases : C 3 A
Standard safety requirements for general cements
5 WHITENESS are followed. Please refer to the Eco White Cement
Safety Data Sheet for more information.
Whiteness of Eco White Cement is done according to
L, a, b, and Y values with regard to Hunter Lab systematic. 10 STORAGE CONDITIONS AND SHELF LIFE
Çimsa Eco White Cement must be stored in dry and
L (Brigthness) 93.25
sheltered conditions. In this case, it will retain its
a (Greenness) -1.45
properties for at least 6 months. Based on earlier
b (Yellowness) 2.90
studies, it has been observed to maintain its properties
Y (Whiteness) 86.5 for more than a year. No more than 10 bags or 2
pallets should be stacked in a row. The product must be
stored in its original package. In cases where it is not
used, the mouth of the package must be tightly closed.

Revizyon Tarihi : 08.07.2021


Revizyon No : 002 NAME OF THE FORMULA

You might also like