APR23 CE Assignment

TOTAL MARKS
100
Choose an item.
APRIL 2023 SESSION
Choose an item.
CONTROL ENGINEERING
(BME 3033/BEE3093)
STUDENT NAME :
MATRIC NO :
SUBMISSION DATE :Click or tap to enter a date.
LECTURER NAME :Choose an item.
GENERAL INSTRUCTION
THIS PAPER CONTAINS SEVEN PRINTED PAGES (6) INCLUDING THE FRONT PAGE.
THIS PAPER CONTRIBUTES TO 20% OF THE FINAL MARKS.
FEEDBACKS FROM LECTURER
FEEDBACKS FROM STUDENT

FACULTY OF ENGINEERING AND BUILT ENVIRONMENT
Assignment brief
Program : Bachelor of Mechanical Engineering with Honours

Module Name : Control Engineering
Code : BME 3033/BEE 3093
Assignment : Individual assignment
Assignment submission guideline:
A Hard copy of the assignment signed by student with faculty cover sheet attached.
Also, assignment must be submitted in Microsoft word format or Pdf format to the
submission assignment provided on LMS.
Your lecture notes will give you the basic framework ONLY of the ideas, theories and
concepts you will need to complete the assignment. These notes will therefore NOT be
sufficient on their own. You will need to make use of the required reading, extra references
and any other material you come across in the course of researching your assignment.
Only academic references are accepted. Don’t cite those non-academic website or
articles (e.g. Wikipedia, google, etc.).
Late Submission
For any late submission without any good reasons, thus comply to the rules as per
mention below:
1 day late: 5 marks will be deducted from the mark achieved by the student
2 to 9 days late: a further 5 marks will be deducted from the mark achieved by the student
for each day the work remains unsubmitted
10 days late: a mark of zero will normally be recorded
Non-submission of work
Non-submission of work without extenuating circumstances will be counted as a
non- submission and marked as zero.
2
Editorial/Presentation guidelines
Font size Size12
Font style Times New Roman
Headings Size 12 bold
Margins 4cm Left margin
2.5 cm top, bottom, and side margins
Spacing 1.5 lines spacing
Colour Depends on your report
Paginatio Individual pages must be numbered - bottom of page and
n centre
Justify Justify text in the document
Table Table caption must be placed on top of the table
Table caption font is Times New Roman, size 10, Italic
Table number font is Times New Roman, size 10, bold
Within table font is Times New Roman, size 10
Figure Figure caption must be placed on the bottom of the figure
Figure caption font is Times New Roman, size 10, Italic
Figure number font is Times New Roman, size 10, bold
Within Figure (Axis) font is Times New Roman, size 10
Reference IEEE template (Not older than 2010)
Assignment Submission due date

Final submission:
1 MONTH FROM HANDOVER DATE
Assignment must be submitted through the submission link provided on LMS and all
the works must be type written.
Marking
This assignment has only 20% marks of your total mark. All the assessment will
evaluate based on the rubric given.
3
Control Engineering
BME 3033
Rubric Assessment
Evaluation Scale
Weightage Between Max.
CLO Criteria Below Out-
(%) Acceptable to Score
Expectation standing
Outstanding
CLO  Correct expression the 1.67 1 2 3
1: mathematical model of quarter
PLO car model.
1:  Correct derivation procedure
C2 and method.
(WP  Use the correct term in
1) derivations
CLO  Correct Simulink diagram in 1.67 1 2 3
2: MATLAB Simulink software.
PLO  Correct insert the parameter
2: for passive suspension
C3
(WP system.
3)  Correct parameter used.
CLO 3  Correct analyze 1.67 1 2 3
PLO performance of semi-active

3 suspension system.
C4  Correct behavior of passive
(WP suspension system.
3)  Correct plotting the graph.
CLO  Correct design control 1.67 1 2 3
4:PLO structure for semi-active
3: C5 suspension system.
(WP1,  Provide a good results and
WP3) readable legend and font.
 Provide discussion on the
prediction results between
passive and semi-active
suspension system.
 Plagiarism must be less than
30% of the Assignment.
Accepted/
 Provide student feedbacks on
Rejected
the front pages.
Total /20
4
Assignment description
1. TASKS:
PLM Company is an automotive vendor company that provided services to
design a semi-active suspension system for MNB vehicle brand. As production
engineer, you are required to design a new semi-active damper for
crashworthiness system in a new vehicle to reduce the crash impact to the driver.
In preliminary stage you as production engineering need to provide a prediction
results to present to your client. By providing a part of crashworthiness in vehicle
which is single degree of freedom (SDOF) as in Figure 1, you need to evaluate
the performance of the proposed suspension system by using MATLAB Simulink
software and provide the evidence results compared to passive suspension
system. You are also required to design a control system for a semi-active
suspension for the vehicle. Then, you are required to provide technical report as
followed by customer needs:
Figure 1: Crashworthiness system of passenger vehicle
1. Classify the type of control loop system that able to implement for suspension
system. Why? Justify your answer.
[CLO1:PLO1:C2]
2. From the diagram in Figure 1, prepare mathematical equation for crash
impact model and build a model that includes passive damper system in
MATLAB Simulink. The parameters of quarter car model are as listed below.
[CLO2:PLO2:C3]
Table 1: Parameter
Parameter Value Unit
m XY0 Kg
k YY 000 N/m
c ZZ 00 N-s/M
5
*Important notes: the value of XYZ is obtained from the last 3 digits of your
matric number.
3. Based on the simulation analysis, analyze the response of the passive

damper system for this crash impact model.
[CLO3:PLO3: C4]
4. Develop a control system for a semi-active damper system and compare its
performance against passive damper system. Diagnose with discussion
based on the results obtained.
[CLO4:PLO3:C4]
Summary: From this assignment, the students need to provide a discussion for
comparing the characteristic performance between passive and semi-active damper
system for crash impact model. Each student will provide their own result and the
discussion should be related with parameters obtained.

APR23 CE Assignment

Uploaded by

Copyright:

Available Formats

APR23 CE Assignment

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

APR23 CE Assignment

Uploaded by

Copyright:

Available Formats

TOTAL MARKS

FEEDBACKS FROM LECTURER

FEEDBACKS FROM STUDENT

Program : Bachelor of Mechanical Engineering with Honours

Assignment submission guideline:

Assignment Submission due date

PLO performance of semi-active

Figure 1: Crashworthiness system of passenger vehicle

3. Based on the simulation analysis, analyze the response of the passive

You might also like