GOVERNMENT OF INDIA

MINISTRY OF SKILL DEVELOPMENT & ENTREPRENEURSHIP

DIRECTORATE GENERAL OF TRAINING

COMPETENCY BASED CURRICULUM

SEWING TECHNOLOGY
(Duration: One Year)
Revised in July 2022

CRAFTSMEN TRAINING SCHEME (CTS)

NSQF LEVEL- 3

SECTOR – APPAREL
SEWING TECHNOLOGY
(Non-Engineering Trade)

(Revised in July 2022)

Version: 2.0

CRAFTSMEN TRAINING SCHEME (CTS)

NSQF LEVEL - 3

Developed By

Ministry of Skill Development and Entrepreneurship

Directorate General of Training
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
EN-81, Sector-V, Salt Lake City,
Kolkata – 700 091
www.cstaricalcutta.gov.in
 CONTENTS

S No. Topics Page No.

1. Course Information 1

2. Training System 2

3. Job Role 6

4. General Information 7

5. Learning Outcome 9

6. Assessment Criteria 11

7. Trade Syllabus 18

8. Annexure I (List of Trade Tools & Equipment) 28

Sewing
Technology 1. COURSE INFORMATION

During the one-year duration of “Sewing Technology” trade, a candidate is trained on

Professional Skill, Professional Knowledge and Employability Skill related to the job role. In
addition to this, a candidate is entrusted to undertake project work, extracurricular activities
and on-the-job training to build up confidence. The broad components covered under
Professional Skill subject are as below: -

The skill training starts with making hand stitches in the given fabric; stitching the
following using the given fabric: Seams with seam finishes, Darts, Pleats, Tucks, Gathers &
Shirrs, Frill, Hem, Casing, Edge Finishing, Neck lines, Placket, Pocket, Collar, Sleeves, Cuff. The
trainee learns how to fix the fasteners on the given fabric, mend the given fabric as per
requirement. He/she is also able to draft a pattern for Ladies' Suit & Sew a Ladies' Suit with the
help of the given pattern.

In the later phase of the course, the trainee is trained to sketch different varieties of
garments like ladies’ Tops/Short kurties, ladies’ Suit, Nightwear (one piece/two piece), Sari
blouse, dresses for new born, toddler & kids etc. He/ she constructs the various garments like
sari petticoat, ladies’ top/short kurties, ladies’ Suit, nightwear (One Piece with Yoke, Two Piece
– Night suit), sari blouse (Simple Model - Plain), dress for a Newborn(Jhabla), dress for a Toddler
(Sun-Suit), Kids(Frock), Gent’s Kurta and Pyjamas, Casual Shirt and Trousers with fitting and
quality according to the sketched designs.

1
Sewing
Technology 2. TRAINING SYSTEM

2.1 GENERAL

The Directorate General of Training (DGT) under Ministry of Skill Development &
Entrepreneurship offers a range of vocational training courses catering to the need of different
sectors of economy/ Labour market. The vocational training programmes are delivered under
the aegis of Directorate General of Training (DGT). Craftsman Training Scheme (CTS) with
variants and Apprenticeship Training Scheme (ATS) are two pioneer schemes of DGT for
strengthening vocational training.

‘Sewing Technology’ trade under CTS is one of the courses delivered nationwide through
a network of ITIs. The course is of one-year duration. It mainly consists of Domain area and Core
area. The Domain area (Trade Theory & Practical) imparts professional skills and knowledge,
while the core area (Employability Skill) imparts requisite core skills, knowledge, and life skills.
After passing out the training program, the trainee is awarded National Trade Certificate (NTC)
by DGT which is recognized world-wide.

Candidates broadly need to demonstrate that they are able to:

● Read and interpret parameters/documents, plan and organize work processes, identify
necessary materials and tools;
● Perform tasks with due consideration to safety rules, accident prevention regulations
and environmental protection stipulations;
● Apply professional skill, knowledge & employability skills while performing jobs.
● Document the parameters related to the task undertaken.

2.2 PROGRESSION PATHWAYS

● Can join industry as Tailor (Craftsman) in general and will progress further as Master
Tailor (Senior Craftsman), Supervisor and can rise up to the level of Manager.
● Can become Entrepreneur in the related field.
● Can join Apprenticeship programs in different types of industries leading to a National
Apprenticeship certificate (NAC).
● Can join Crafts Instructor Training Scheme (CITS) in the trade for becoming an instructor
in ITIs.
● Can join Advanced Diploma (Vocational) courses under DGT as applicable.

2
Sewing
Technology
2.3 COURSE STRUCTURE

Table below depicts the distribution of training hours across various course elements
during a period of one year: -

Notional Training
S No. Course Element
Hours
1 Professional Skill (Trade Practical) 840
2 Professional Knowledge (Trade Theory) 240
3 Employability Skills 120

Total 1200

Every year 150 hours of mandatory OJT (On the Job Training) at nearby industry,
wherever not available then group project is mandatory.

On the Job Training (OJT) / Group Project 150

Trainees of one-year or two-year trade can also opt for optional courses of up to 240 hours in each year
for 10th/ 12th class certificate along with ITI certification, or, add on short term courses.

2.4 ASSESSMENT & CERTIFICATION

The trainee will be tested for his skill, knowledge and attitude during the period of course
through formative assessment and at the end of the training programme through summative
assessment as notified by the DGT from time to time.

a) The Continuous Assessment (Internal)during the period of training will be done by Formative
Assessment Method by testing for assessment criteria listed against learning outcomes. The
training institute has to maintain an individual trainee portfolio as detailed in assessment
guideline. The marks of internal assessment will be as per the formative assessment template
provided on www.bharatskills.gov.in.

b) The final assessment will be in the form of summative assessment. The All India Trade Test
for awarding NTC will be conducted by Controller of examinations, DGT as per the guidelines.
The pattern and marking structure are being notified by DGT from time to time. The learning
outcome and assessment criteria will be the basis for setting question papers for final
assessment. The examiner during final examination will also check the individual trainee’s
profile as detailed in assessment guideline before giving marks for practical examination.

3
Sewing
Technology
2.4.1 PASS REGULATION

For the purposes of determining the overall result, weightage of 100% is applied for six
months and one-year duration courses and 50% weightage is applied to each examination for
two years courses. The minimum pass percent for Trade Practical and Formative assessment is
60% & for all other subjects is 33%.

2.4.2 ASSESSMENT GUIDELINE

Appropriate arrangements should be made to ensure that there will be no artificial

barriers to assessment. The nature of special needs should be taken into account while
undertaking the assessment. Due consideration should be given while assessing for teamwork,
avoidance/reduction of scrap/wastage and disposal of scrap/waste as per procedure,
behavioral attitude, sensitivity to the environment and regularity in training. The sensitivity
towards OSHE and self-learning attitude are to be considered while assessing competency.

Assessment will be evidence based comprising some of the following:

● Job carried out in labs/workshop

● Record book/ daily diary
● Answer sheet of assessment
● Viva-voce
● Progress chart
● Attendance and punctuality
● Assignment
● Project work
● Computer based multiple choice question examination
● Practical Examination

Evidences and records of internal (Formative) assessments are to be preserved until

forthcoming examination for audit and verification by examining body. The following marking
pattern to be adopted for formative assessment: -

Performance Level Evidence

(a) Marks in the range of 60%-75% to be allotted during assessment
For performance in this grade, the ● Demonstration of good skills and accuracy
candidate should produce work which in the field of work/ assignments.
demonstrates attainment of an acceptable ● A fairly good level of neatness and
standard of craftsmanship with occasional consistency to accomplish job activities.
guidance, and due regard for safety ● Occasional support in completing the task/
procedures and practices. job.

4
Sewing
Technology (b) Marks in the range of 75%-90% to be allotted during assessment
For this grade, a candidate should produce ● Good skill levels and accuracy in the field
work which demonstrates attainment of a of work/ assignments.
reasonable standard of craftsmanship, with ● A good level of neatness and consistency
little guidance, and regard for safety to accomplish job activities.
procedures and practices ● Little support in completing the task/job.
(c) Marks in the range of more than 90% to be allotted during assessment
For performance in this grade, the ● High skill levels and accuracy in the field of
candidate, with minimal or no support in work/ assignments.
organization and execution and with due ● A high level of neatness and consistency to
regard for safety procedures and practices, accomplish job activities.
has produced work which demonstrates ● Minimal or no support in completing the
attainment of a high standard of task/ job.
craftsmanship.

5
Sewing
Technology
3. JOB ROLE

Tailor, General: makes ladies and gents' garments and children's clothes by stitching various
components together according to pattern, by hand or sewing machine. Measures customers
for size with inch-tape and record measurements for making garments. Cuts material according
to pattern and size and assembles garment parts by sewing. Fits stitched garment on customer,
marks alterations to be made and finishes garments. May prepare new designs and Masden
Lays and supervise sewing, stitching, button holing, etc. delegated to other workers. May also
repair and renovate garments.

Sampling tailor; is responsible for developing garment sample as per buyer’s specifications in
the apparel industry. A sampling tailor should be able to perform basic fabric cutting operations
and stitch garments of various designs with different necklines, sleeves, collar etc. as per the
quality standards. This job requires the individual to have thorough knowledge of
measurements, garment styles, sampling and apparel production processes and should be able
to sew garments with different materials and trims.

Dress Maker/ Ladies Dress Maker; stitches together parts of women's garments such as
dresses, blouses, jumpers, brassieres, etc., according to instructions of Master Cutter. Stitches
together parts by hand and machine. Inserts inner material, makes embroidery work, button-
holes, etc., and attaches lining, lace, button, etc. Carries out alteration as directed. May press
garments and supervise work of Sewer, Hand.

Reference NCO- 2015:

(i) 7531.0100 – Tailor, General

(ii) 7531.0101 – Samplingtailor
(iii) 7531.0200 –Dress Maker/Ladies Dress Maker

Reference NOS:
i) AMH/N9405
ii) AMH/N1948,
iii) AMH/N9406
iv) AMH/N1949,
v) AMH/N1947,
vi) AMH/N 1211,
vii) AMH/NO701

6
Sewing
Technology 4. GENERAL INFORMATION

Name of the Trade Sewing Technology

Trade Code DGT/1011

NCO – 2015 7531.0100, 7531.0101 ,7531.0200

NOS Covered AMH/N9405,AMH/N1948,AMH/N9406, AMH/N1949, AMH/N1947,

AMH/N 1211, AMH/NO701
NSQF Level Level-3
Duration of Craftsmen
One Year (1200 Hours+150 hours OJT/Group Project)
Training

Entry Qualification Passed 8th class examination

Minimum Age 14 years as on first day of academic session.

Eligibility for PwD LD,CP,LC,DW,AA,LV,DEAF,HH,AUTISM,ID,SLD

Unit Strength (No. of

20 (There is no separate provision of supernumerary seats)
Student)
Space Norms 64Sq. m

Power Norms 5 KW

Instructors Qualification for:

7
Sewing
Technology(i) Sewing Technology B.Voc/Degree in Fashion & Apparel Technology from UGC recognized
Trade College /university with one-year experience in the relevant field.
OR
Diploma (Minimum 2 years) in Garment fabrication Technology/
Costume Design & Dress Making from recognized board of technical
education or relevant Advanced Diploma (Vocational) from DGT with
two years’ experience in the relevant field.
OR
NTC/NAC passed in the Trade of “Sewing Technology” earlier named
as “Cutting &Sewing” with 3 years experience in the relevant field.

Essential Qualification:
Relevant Regular / RPL variants of National Craft Instructor Certificate
(NCIC) under DGT.

Note:
Out of two Instructors required for the unit of 2(1+1), one must have
Degree/Diploma and other must have NTC/NAC qualifications.
However, both of them must possess NCIC in any of
its variants.
(ii) Employability Skill MBA/ BBA / Any Graduate/ Diploma in any discipline with Two years’
experience with short term ToT Course in Employability Skills.
(Must have studied English/ Communication Skills and Basic Computer
at 12th / Diploma level and above)

OR
Existing Social Studies Instructors in ITIs with short term ToT Course in
Employability Skills.
(iii) Minimum Age for 21 Years
Instructor
List of Tools and
As per Annexure – I
Equipment

8
Sewing
Technology 5. LEARNING OUTCOME

Learning outcomes are a reflection of total competencies of a trainee and assessment will
be carried out as per the assessment criteria.

5.1 LEARNING OUTCOMES (TRADE SPECIFIC)

1. Make hand stitches in the given fabric following safety precautions .:AMH/N9405
2. Stitch the following using the given fabric: ( NOS: AMH/N1948)
● Seams with seam finishes
● Dart
● Pleat Tucks
● Gathers &Shears
● Frills
● Hems
● Casing
● Edge-Finishing
● Neck line
● Placket
● Pocket
● Collar Sleeve
● Cuff
3. Fix the fasteners on the given fabric. :AMH/N9406
4. Mend the given fabric. (NOS:AMH/N 1949)
5. Draft a pattern for Ladies’ Suit and Sew a Ladies’ Suit with the help of the given pattern. ( NOS:
AMH/N 1947)
6. Sketch the following garments: (NOS: AMH/N1211)
● Ladies’ Tops/Short kurties (NOS: AMH/N1211)
● Ladies ‘Suit (NOS: AMH/N1211)
● Nightwear (one
piece/two- (NOS:
AMH/N1211)piece)
● Sari Blouse (NOS: AMH/N1211)
● Dresses for New Born (NOS: AMH/N1211)
● Dresses for Toddler (NOS: AMH/N1211)
● Dresses for Kids (NOS: AMH/N1211)
7. Construct the following garments with fitting and quality according to the sketched
gns:
(NOS: AMH/NO701)
● Sari Petticoat (NOS:AMH/NO701)
● Ladies’ Top/Short Kurties (NOS:AMH/NO701)
● Ladies’ Suit (NOS:AMH/NO701)

9
 ● Nightwear (One Piece with Yok
Sewing
(NOS:AMH/NO701)e)
Technology
● Nightwear (Two Piece – Night suit)
(NOS:AMH/NO701)
● Sari Blouse (Simple Model - Plain)
(NOS:AMH/NO701)
● Dress for a New-born(Jhabla) (NOS:AMH/NO701)
● Dress for a Toddler (Sun Suit) (NOS:AMH/NO701)
● Dress for Kids (Frock) (NOS:AMH/NO701)
● Gent’s Kurta and Pyjamas (NOS:AMH/NO701)
● Gent’s Casual-Shirt (NOS:AMH/NO701)
● Gent’s Trousers (NOS:AMH/NO701)

10
Sewing
Technology 6. ASSESSMENT CRITERIA

LEARNINGOUTCOMES ASSESSMENT CRITERIA

1. Make hand stitches in the Identify tools for Cutting, Sewing & Finishing and use of these tools
given fabric following with safety.
safety precautions. Select suitable fabric. Select suitable needle size and sewing thread
:AMH/N9405 according to fabric.
Straighten the fabric grain.
Maintain the distance between two stitches. Take care about length
and width of the stitches.
Follow the color combination while doing the decorative stitches.
Finish the edge of the fabric using hemming stitch.
Follow the safe measures and needle guard policy while doing the
sewing.

2. Stitch the following using Identify tools for Cutting, Sewing & Finishing and use of these tools
the given fabric. with safety.
(NOS: AMH/N 1948) Select suitable fabric. Select suitable needle size and sewing thread
according to fabric.
Straighten the fabric grain.
Sit in a correct posture and test the stitch formation in these wing
machine.
Use proper sewing aids while sewing the garment.
Seams with seam finishes
Use appropriate stitching techniques such as single pointed darts,
plain seam, continuous placket, casing and decorative hem.
Check the direction of darts.
Finish the garment by applying suitable fasteners.
Dart
Mark the dart properly at the start and the end.
Stitch the dart and knot the dart end.
Press the dart.
Pleat
Mark the pleat lines.
Stitch the pleat.
Check distance in between the pleats.
Press the Pleat.
11
Sewing
Technology Tucks
Mark the tuck lines.
Stitch the tucks.
Finish the stitching at the tuck end.
Press the tucks.
Gathers and Shirrs
Marks the start and end of gathers.
Check the equal distribution of gathers.
Stitch in straight lines.
Thread the overlock machine.
Finish the free edge by overlock machine.
Press the fabric at the end.
Mark and cut the frill strips.
Frills
Finish the edge of the frill.
Attach the frill to a fabric.
Mark the hem with proper tools.
Hems
Maintain equal folding throughout the hem.
Properly finish the corner in case of mitered hem.
Mark the allowance for casing in the fabric.
Casing
Turn the fabric equally while stitching casing.
Finish the edge of the casing at the opening side.
Maintain the straight line while stitching.
Make the bias strips.
Edge finishing
Join the bias strips properly.
Attach the bias strip on the curved lines.
Cut & clip in the curved lines.
Maintain the shape of the necklines.
Neckline
Select the proper method of finishing the neckline.
Follow perfection while stitching in curves.
Maintain neatness and balance throughout the process.
Finish the end point of the placket.
Placket
Mark and cut the finishing strips.
Follow straight edge stitching.
12
Sewing
Technology Select and mark the placement of the pocket.
Pocket
Stitch neatly the corners in case of patch pockets.
Secure the ends of the pocket mouth.
Follow neatness while sewing with the base fabric.
Select suitable interlining and its facing for the main fabric.
Collar
Check the balance of the collars.
Maintain shapes at the both ends of the collars.
Follow sharp collar points while turning the collar.
Check the fabric suits the sleeve style.
Sleeve
Cut the fabric for sleeve by following proper fabric grain.
Finish the bottom of the sleeve neatly.
Select suitable interlining material according to main fabric.
Cuff
Fix or Fuse the interlining to the main fabric.
Maintain neatness while sewing the corners of the cuff.
Make neat top stitching on the cuff.
Solve the sewing machine problems with suitable remedies after
finding the causes.
Follow the safe measures and needle guard policy while doing the
sewing.

3.Fix the fasteners on the Select a suitable fastener according to the requirement.
given fabric. Maintain neatness while starting and ending stage of fixing fasteners.
AMH/N9406 Match male & female part of fasteners.
Fix the size of the buttonhole according to the button.
Follow equidistance and equal height with neatness of buttonhole
stitches.

4. Mend the given fabric. Select the thread with suitable color and quality for patching.
( NOS:AMH/N 1949) Finish neatly the darned or patched piece.

5.Draft the pattern of Ladies Identify tools for measuring, marking, drafting & cutting and use of
these tools with safety.

Explain the measuring units and measuring techniques for required

Suit with the help of the measurements.

13
Sewing
Technology given pattern. Draft the pattern for a Ladies’ Suit. Use the paper economically and
( NOS: AMH/N 1947) check for shapes, front and back shoulder, side seams.
Cut the pattern using shears properly along the cutting line and check
cutting edges.
Finish the pattern with pattern particulars.
Identify tools for Sewing & Finishing and use of these tools with
safety.
Select suitable fabric for the garment and select suitable needle size
and sewing thread according to fabric.
Straighten the fabric grain.
Place the patterns on the fabric and mark the pattern outline
properly.
Cut the components by selecting suitable tool.
Make upper and lower threading in an Industrial Model single needle
lock stitch machine.
Sit in a correct posture and test the stitch formation.
Sew the ladies’ suit by applying the component making techniques.
Use proper sewing aids while sewing the garment.
Finish the garment by applying suitable fasteners.
Solve the sewing machine problems with suitable remedies after
finding the causes.
Follow the safe measures and needle guard policy while doing the
sewing.

6. Sketch the following Select a suitable paper for sketching and plan the layout before
garments. ( NOS starting sketching.
:AMH/N1211) Identify the suitable sketching items and use them properly.
a. Ladies Tops/Short kurties
Sketch the garment.
(NOS:AMH/N1211)
b. Ladies’ Suit. ( NOS: Select the proper colors and color combinations.
AMH/N1211) Apply colors and shade on the sketch.
c. Nightwear (one piece/two
piece). (NOS
:AMH/N1211)
d. Sari Blouse. ( NOS
:AMH/N1211)
e. Dresses for New Born.
(NOS: AMH/N1211)
f. Dresses for Toddler.
(NOS :AMH/N1211)
g. Dresses for Kids. s.
(NOS: AMH/N1211)

7. Construct the following Identify tools for Drafting, Cutting, Sewing & Pressing and use of
garments with fitting and these tools with safety.
14
Sewing
Technology quality according to the Decide the design features of the garment according to the sketching.
sketched designs Select the fabric and other raw materials suitable for the garment.
(NOS: AMH/NO701) Explain the measuring units and measuring techniques for required
measurements.
Draft the pattern for the garment. Use the paper economically.
Cut the pattern using shears properly along the cutting line.
Finish the pattern with pattern particulars.
Straighten the fabric grain and prepare the fabric for cutting.
Select and make a suitable economical pattern layout on the fabric
and estimate the fabric consumption.
Mark the pattern outlines properly and cut the components by
selecting suitable shears.
Identify and select the suitable industrial sewing machines for each
process of constructing the garment.
Select suitable needle size and sewing thread according to fabric.
Make upper and lower threading in the required Industrial
Model sewing machines.
Sew the garments using the Industrial model sewing.
Machines with sewing aids by following proper seam and other
allowances.
( NOS: AMH/NO701) Sari Petticoat
Use appropriate stitching techniques such as single pointed darts,
plain seam, continuous placket, casing and Circular/decorative hem.
Check the direction of darts.
Finish the garment by applying suitable fasteners.
(NOS: AMH/NO701) Ladies’ Top/Short Kurties
Select the particular seam type suited to the particular area of the
garment.
Check the front kurta placket, Faced neckline and squared hem.
Check the neckline edge finished with facing of Kameez.
Stitch neatly the Squared turned up bottom hem & Turned up sleeve
bottom of Kameez.
Maintain neatness in armhole joints and there should be no puckering
at armhole joints in Kameez.
Stitch neatly the according to the design of salwar bottom.
Fold down the casing uniformly in salwar.
Maintain proper positioning and distribution of cluster pleats in
salwar.
Finish the belt finishing of salwar properly.

15
Sewing
Technology Nightwear (One Piece with Yoke)
(NOS: AMH/NO7010) Stitch the yoke and neck in proper shape.
Use appropriate sleeve pattern.
Distribute the gathers properly.
Stitch with no puckering at armhole.
Finish the neckline properly with clean.
Finish the Turned-up hem neatly.
Make the flare of nightwear with proportion.
(NOS:AMH/NO7001 Nightwear (Two Piece – Night suit)
Stitch the Front placket of the Shirt neatly.
Finish the neckline with Convertible collar.
Stitch Full/Half plain sleeve with turned up bottom.
Make the Squared turned up bottom hem properly.
Stitch the two patch pockets with hem with proper position.
Maintain neatness while stitching Fold down casing and turned up
hem in Simple Pyjamas.
Sari Blouse (Simple Model - Plain)
(NOS:AMH/NO701)
Select suitable fabric.
Check the dart positions.
Finish the neckline with pipings.
Sew Front Placket neatly.
Check the position and finishing of fasteners.
Finish the hemline neatly.
No puckering should be anywhere in the blouse.
(NOS:AMH/NO701) Dress for a Newborn (Jhabla)
Select a smooth soft fabric suitable for a newborn baby.
Press studs or strings should be used.
Finish the turned-up hem.
Finish the Neckline and armhole with combined facings.
(NOS:AMH/NO701) Dress for a Toddler (Sun Suit)
Select a fabric properly.
Check that the elastic should not be very tight.
Check the finishing of the strap and bib attached to the bloomer.
Check the design element of sun suit.
Fix suitable fasteners.
(NOS:AMH/NO701) Dress for Kids (Frock)
Check the design element of frock.
Check the finishing in stitching lines.
Check the Proportionate and equally distributed gathers.
16
Sewing
Technology Stitch the Puffed Sleeve proportionately.
Check the position of the placket and fasteners.
Check the Overall finishing in hand work such as attachments of
fasteners, hemming and neckline finishing.
Make the collar with proper shape.
Check the quality of the Turned up hem.
( NOS:AMH/NO701) Gent’s Kurta and Pyjamas
Make two-piece placket in Kurta.
Finish the neckline with continuous facing.
Make the Squared hem neatly.
Finish the Inseam kurta pocket properly.
Fold down the casing of pyjamas neatly.
Finish the side pocket.
Secure the end of pocket.
Match seam at the intersecting points of the seamlines.
Gent’s Casual Shirt
( NOS: AMH/NO701)
Check the shape of collar, cuff, pocket, and its finishing.
Check the finishing of placket and placement of button and buttonholes.
Check the yoke shape and pleat position below the yoke.
Make the Sleeve placket and check the position of pleats.
Check the overall finishing of shirt.
Gent’s Trousers
(NOS: AMH/NO701)
Assure that Side pocket/Back hip pocket and fly placket ends should
be secured properly.
Sew the side seams without puckering.
Make the loops, pleats and darts with proper placement.
Check the alignment of both left and right side of Waist band.
Check the finishing of side pocket and back hip pocket.
Finish and hem the bottom properly.
Check the fitting of the garment.
Check the measurements and Quality of the garments and
find the defects and stains if any.
Correct the defects and remove the stains if any.
Press and folding the garment using pressing tools and folding
accessories.
Solve the sewing machine problems with suitable remedies after
finding the causes.
Follow the safe measures and needle guard policy while doing the
sewing and other operations.

17
Sewing
7. TRADE
Technology SYLLABUS

SYLLABUS FOR SEWING TECHNOLOGY TRADE

Duration – One Year
Professional Skills
Reference Learning Professional Knowledge
Duration (Trade Practical)
Outcome (Trade Theory)
With Indicative Hours
Professional Make hand stitches 1. Familiarization with the Introduction
Skill 160 Hrs. in the given fabric Institute. (25hrs.) ● Trade
following safety ● Job Prospects
Professional precautions.AMH/N ● Safety precautions
Knowledge 9405 ● First Aid
42Hrs. (06 hrs.)

2. Familiarization & handling of Basic Industrial Terminology

tools. (10hrs.) Trade related Tools, their
3. Safety Precautions while importance, usage and safety
handling the tools. (10 hrs.) ● Measuring Tools
4. Measurement on dummy ● Drafting Tools
(06hrs) ● Marking Tools
● Cutting Tools
● Sewing Tools
● Finishing Tools
(06 hrs.)

18
Sewing
Technology 5. Identification of fabrics and Fabric Fundamentals
texture. (10 hrs.) ● Brief idea about fibers
6. Handling of Fabrics. (10 hrs.) ● Types of Fabrics
7. Making weave samples. (15 ● Selection of Needle and
hrs.) thread according to fabric
types
● Broken Needle
Policy Fabric Preparation
for cutting
● Fabric Grain
● Selvedge
● Shrinkage
Straightening the fabric
Grains
● Measurements
● Units
● Measuring Techniques
8.Market survey and Swatch file (06 hrs.)
(10hrs) ● Define the Problem
&Research Object
• Developing Marketing
Research Planning
• Collect Needed Information
• Implementing Marketing
Research Plan (06 hrs.)

Practice on Industrial Single Basic Sewing Machine

needle lock stitch Sewing ● Parts and functions
Machine ● Machine needle
9.Ergonomic principle of sitting ● Stitch formation
on sewing machine. (8 hrs.) ● Sewing machine practice
10.Speed Control. ● Care and maintenance
(5 hrs.) ● Trouble-Shooting
11Practice on paper. (8hrs.) ● Types of Industrial Sewing
12Threading of machine. (10 Machine
hrs.) (12 rs.)
13Bobbin winding &loading. (5
hrs.)
14.Practice on fabric. (8hrs.)

19
Sewing
Technology 15.Running on (10 hrs.) Over lock machine
● Straight lines ● Parts and functions
● Square ● Machine practice
● Zigzag lines ● Care and maintenance
● Circle ● Trouble Shooting Basic
● Semicircle Garment Analysis (06 hrs.)
● Spiral.
16.Practice on Over lock
machine
● Threading
● Running
● Minor adjustments.
(10hrs.)
Professional Stitch the following 17.Practice of making Seams Seams
Skill 230 hrs. using the given (15hrs.) ● Classification
fabric: Seams with ● Plain Seam (Straight ● Uses
Professional seam finishes, Darts, &Curved) with seam ● Properties of Seams
Knowledge Pleats, Tucks, finishes ● Seam finishes Sewing Aids
60 hrs. Gathers & Shirrs, ● Self-Enclosed seams ● Presser foots
Frill, Hem, Casing, ● Top stitched seams ● Folders
Edge Finishing, Neck ● Corded Seam ● Guides
lines, Placket, ● Decorative seams (06 hrs.)
18.Practicing with Sewing Aids.
(NOS: AMH/N1948) (05hrs)

Pocket, Collar,
Sleeves, Cuff. 19.Making Samples of Introducing Fullness
● Darts ● Darts – Necessity, type &
● Pleats. precautions during
(15hrs.) stitching
● Pleats – Necessity, type
&uses
(06 rs.)

20
Sewing
Technology 20.Making Samples of Introducing Fullness
● Tucks ● Tucks – Types &use
● Gathers and Shirrs ● Gathering and Shirring
● Frills. ● Flare
(10hrs.) ● Ruffles/Frills – Types
(Straight & Circular) &uses
21.Practice of Hand stitches &
Making Samples of them. Hand stitches
(10hrs.) ● Hand needles –
Size &types
● Sewing Thread
● Types & Applications of
hand stitches
(06 rs.)

22.Making samples of Hems

● Faced Hem ● Types
● Edge stitched hem ● Uses
● Double stitched hem
● Band hem Corner Makings
● Ease in ahem ● Types
● Mitered hem. ● Uses
(10hrs.) (06 hrs.)
23Practice of the corner
makings
● Self-turned
● With additional strip.
(10 hrs.)
24.Making samples of: Casing
● Casing with Drawstring ● Introduction

21
Sewing
● Casing with elastic ● Use
Technology
● Casing with heading Edge Finishing
● Inside applied casing ● Facings
● Outside applied ● Bindings
casing. ● Pipings
(20 hrs.) (06 hrs.)
25.Making samples of edge
finishing:
● Bias facing
● Combination shaped
facing
● Outside facing
● Self-facing
● Shaped facing
● Binding
● Piping
(30 hrs.)
26. Making samples of different Necklines
shaped necklines. (25 hrs.) ● Different shapes of
neckline
27.Making samples of Plackets: Plackets
(25 hrs.) ● Types
● Faced Placket ● Sample makings
● Continuous Placket (06 hrs.)
● One Piece Placket
● Two Piece Placket
● Two piece Placket with
pleat
● Zippered Placket
⮚ Lapped
⮚ Fly Front
⮚ Open End
⮚ Invisible
⮚ Visible
28.Making samples of different Pockets
Pockets ● Types
● Patch ● Design variations
● Inseam (06 hrs.)

22
Sewing
● Cut/slash
Technology
(25. hrs.)
29.Samples of making Collars. Collars
(15hrs) ● Classification
30.Samples of making Sleeves. ● Collar terms
(15hrs)
Sleeves
● Classification
● Sleeve length variation
● Sample making of Sleeves
with and without cuff.
(06 hrs.)
Professional Fix the fasteners on 31.Practice of fixing fasteners as Trimmings
Skill 10Hrs; the given fabric. Buttons, Hooks, Eyes, Press ● Types
AMH/N9406 Studs. (6 hrs.) ● Applications
Professional 32.Practice of making Button ● Fixing of Buttons, hooks
Knowledge holes by Hand. (4 hrs.) etc.
06Hrs ● Making of Buttonhole
(06 hrs.)
Professional Mend the given 33. Practicing Darning and Mending
Skill 10Hrs; fabric. Patching. ● Darning
(Mapped NOS: (10 hrs.) ● Patching
Professional AMH/N1949) (06 hrs.)
Knowledge
06Hrs
Professional Draft a pattern for 34. Stitching of Ladies suit. (30 Drafting & developing Pattern
Skill 30Hrs; Ladies' Suit and sew hrs.) for
a Ladies' Suit with Ladies suit.
Professional the help of the given (12 hrs.)
Knowledge pattern.
12Hrs (Mapped NOS:
AMH/N1947)

23
Sewing
Professional Sketch the following
Technology 35. Practice of taking Body Human Figures
Skill 140 hrs.; garments.AMH/N12 Measurements. ● Eight Head Theory
11 (20 hrs.) ● Brief introduction about
Professional ● Ladies’ Tops/ • Alteration of garment as Joints and Muscles
Knowledge Short kurties. per requirement of
● Types of Figures Body
customer
42 Hrs ● Ladies’ Suit. Measurements
● Nightwear (one ● Importance
piece/ two ● Types & Measuring
piece). Techniques
● Sari Blouse. ● Precautions
● Dresses for New ● Measurement Charts
Born. ● Records alteration as
per requirement of
● Dresses
customer (06 hrs.)
for Toddlers.
36. Practicing different types of Patterns
Dresses for Kids. layout using the given ● Importance
(Mapped NOS: patterns. ● Pattern Information
AMH/N1211) (20 hrs.) ● Types of Spreading &
Pattern Layout
● Importance
● Spreading
methods/machines
● Types of layout Pattern
Drafting
● Drafting/Pattern
Terminology
● Principles of Pattern
drafting
(06 rs.)
37.Pattern Making, Fabric Pressing
Estimation, Cutting, Sewing, · Tools
Pressing & Folding of Sari · Methods Importance of
Petticoat. Pressing Trial Room
(60 hrs.) · Necessity
· Specification
38.Checking the Fitting of the Sketching and drafting of Sari
garment. Petticoat.
(10 hrs.) (24 rs.)

24
Sewing
Technology 39.Practice on special industrial Mass Production Process –
sewing machines – (30 hrs.) ● Sequence of operations
● Double Needle Machine ● Types of cutting
● Button Hole Machine machines
● Button Sewing Machine ● Fusing Technology
● Multipurpose Machine
● Types of Industrial
(Zigzag)
Machines Used in sewing
● Bar Tack machine
section
● Feed off the Arm Double
● Finishing
Needle
(06 hrs.)
Professional Construct Ladies Wear
Skill 260Hrs; the 40.Pattern Making, Fabric Sketching and drafting of the
following garments Estimation, Cutting, Sewing, following garments-
Professional with fitting and Pressing & Folding of the ● Ladies Tops/Short
Knowledge quality according following garments with design kurties
72Hrs the sketched variations ● Ladies suit
designs. ● Ladies Tops/Short ● Night wear
(NOS:AMH/NO701) kurties (one
● Sari Petticoat. ● Ladies suit piece/two piece)
(NOS:AMH/NO701) ● Sari blouses
● Night wear (one
● Ladies’ Top / (18 hrs.)
Short kurties. piece/two piece)
(NOS:AMH/NO701) ● Simple
● Ladies’ Suit. Ladies Sari
(NOS:AMH/NO701) blouses (60 hrs.)
● Nightwear (one 41.Checking the Fitting of the
piece garment.
(10 hrs)

25
Sewing
Technology with Yoke). Kids Wear Sketching and drafting of the
(NOS:AMH/NO70 42.Pattern Making, Fabric following garments-
1) ● Dresses for newborn
Estimation, Cutting, Sewing,
● Nightwear (Two Pressing & Folding of the ● Dresses for Toddler
piece- Night
following garments with design ● Dresses for Kids
Suit).
variations (24 hrs.)
(NOS:AMH/NO70
● Dresses for newborn
1)
● Dresses for Toddler
● Dresses for
● Dresses for Kids.
New Born
(55 hrs.)
(Jhabla).
(NOS:AMH/NO70
43.Checking the Fitting of the
1) garment.
● Dresses for (10 hrs.).
Toddlers
(NOS:AMH/NO70
Gents Wear Pattern Making, Fabric
1) 44.Pattern Making, Fabric Estimation, Cutting, Sewing,
(Su Estimation, Cutting, Sewing, Pressing & Folding of the
n suit). Pressing & Folding of the following garments with design
● Dresses for Kids following garments with design variations
(Frock). variations
(NOS:AMH/NO70 ● Kurta & Pyazama ● Kurta & Pyazama
1) ● Casual Shirts &Trousers ● Casual Shirts &Trousers
● Gent’s Kurta (24 hrs.)
(90 hrs.)
and Pyjamas.
(NOS:AMH/NO701)
● Gent’s Casual
Shirt.
(NOS:AMH/NO701)
● Gent’s Trousers.
(Mapped
NOS:AMH/NO70
1)
45. Checking the Fitting of the
garment.
(15 hrs.)

26
Sewing
Technology 46.Methods of removing Laundry Stains
different kinds of stains in ● Classification
fabrics. (10 hrs.) ● Removing techniques
47.Checking of garments in Quality Control
respects of –(10 hrs.) · Definition,
● Measurements need &planning
● Stitching · Types of Inspection
● Stains · Stages of Inspection
● Defects · Role of Quality Controller
● Correcting (06 hrs.)
measures.
PROJECT
Choose any four garments mentioned above with specification sheet, Pattern & neatly finished garments
and present the same.

SYLLABUS FOR CORE SKILLS

1. Employability Skills (Common for all CTS trades) (120 Hrs.)

Learning outcomes, assessment criteria, syllabus and Tool List of Core Skills subjects which is
common for a group of trades, provided separately In www.bharatskills.gov.in./ dgt.gov.in

27
Sewing
Technology ANNEXURE-I

List of Tools & Equipment

SEWING TECHNOLOGY (for Batch of 20 Candidates)

S No. Name of the Tools and Equipment Specification Quantity

A. TRAINEES TOOL KIT

1. Measuring Tape 150 cm 20+1 Nos.
2. Seam Ripper 20+1 Nos.
3. Thimble 20+1 Nos.
4. Tailor's Card Scale Triangular 20+1 Nos.
5. Tailors Square Plastic 20+1 Nos.

6. French Curve Set of three 20+1 Nos.

7. Thread Cutter 24" 20+1 Nos.

8. Scale plastic 20+1 Nos.
B. DRAFTING/CUTTING /SEWING ROOM TOOLS & EQUIPMENT
09 Scissors 25 cm 21 Nos.

10 Pinking Shears 05 Nos.

11. Leg Shaper Wooden 21 Nos.

12. Garment Hangers 21 Nos.

13. Screw Driver Set 02 Nos.

14. Pressing Table 02 Nos.

15. Blanket for padding of Pressing Table As per requirement 02 Nos.

16. Pattern Punch 05 Nos.

17. Pattern Notcher 02 Nos.

18. Pattern Hanging Stand 04 Nos.

19. Stand for hanging dresses 05 Nos.

Trial room with arrangements of 3 side mirrors of size 150 cm x 60

20. 01No.
hanging Dresses cm each

21. Electric Automatic steam press 05 Nos.

28
Sewing
Technology Single Needle Lock stitch
22. Sewing Machine - 20 Nos.
Industrial model
23. Over Lock Machine 3 Thread With low back rest stool 01 No.

24. Zigzag Multi Purpose Machine With low back rest stool 01 No.

25. Double Needle Machine With low back rest stool 01 No.

26. Button Hole machine With low back rest stool 01 No.

27. Button Sewing Machine With low back rest stool 01 No.

28. Bar Tack Machine With low back rest stool 01 No.

29. Feed off the arm Double Needle With low back rest stool 01 No.

30. Machine attachments As required

31. Stools 20 Nos.

32. Pigeon hole almirah 10 lockers with separate locking 2Nos

arrangements for trainees
Display Board Covered with glass or 120 x 90 cm 02Nos.
33.
Acrylic Sheet
34. Instructor Table 01No.

35. Instructor Chair 02Nos.

36. Steel Almirah 195x 90 x 60 cm 02Nos.

37. White Board with accessories Size as per requirement 02Nos.

38. Dummy Lady, Men, Kid Different sizes 02 each

39. Air onditioner As required

C. THEORY ROOM
Single desks for trainees with
41. 20 Nos.
arrangements of keeping Books etc.
42. Chairs 20 Nos.

43. Faculty Table & Chair set 01No.

29
Sewing
Technology CPU: 32/64 Bit i3/i5/i7 or latest
processor, Speed: 3 GHz or Higher.
RAM:- 4 GB DDR-III or
Higher, Wi-Fi Enabled. Network
Card: Integrated Gigabit Ethernet,
44. Computer 01No.
with USB Mouse, USB Keyboard
and Monitor (Min. 17 Inch.)
Licensed Operating System and
Antivirus compatible with trade
related software

45. UPS As required

46. Multimedia Projector/interactive As required

board
White Magnetic Board with Felt board
47. 01No.
& accessories
48. Storage Almirah 01No.

49. Book Shelf 01No.

Note: -
1. All the tools and equipment are to be procured as per BIS specification.
2. Internet facility is desired to be provided in the class room.
3. Trainees Tool kit may be treated as consumables in respect of trainees actually completing the
course of one year.

30
Sewing
Technology
ABBREVIATIONS

CTS Craftsmen Training Scheme

ATS Apprenticeship Training Scheme
CITS Craft Instructor Training Scheme
DGT Directorate General of Training
MSDE Ministry of Skill Development and Entrepreneurship
NTC National Trade Certificate
NAC National Apprenticeship Certificate
NCIC National Craft Instructor Certificate
LD Locomotor Disability
CP Cerebral Palsy
MD Multiple Disabilities
LV Low Vision
HH Hard of Hearing
ID Intellectual Disabilities
LC Leprosy Cured
SLD Specific Learning Disabilities
DW Dwarfism
MI Mental Illness
AA Acid Attack
PwD Person with disabilities

31
Sewing
Technology

32