120GC

PRODUCT PREVIEW

VILT,21 JANUARY 2022

ARIEF PRIYONO
APP ENGINEER, C&F DIV
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
Confidentiality Status Yellow
Emergency Evacuation Plan
Emergency Extension Number Total First Aider
XXXX X person

Safety Officer
XXX (+XXXX XXXX XXXX) Evacuation Route

Saat situasi darurat atau kebakaran:

• Anda akan mendengar pengumuman atau alarm kebakaran
• Jangan panik
• Floor warden dan Emergency Response Team (ERT) akan
memandu Anda untuk proses evakuasi
• Jangan kembali ke dalam gedung sebelum mendapatkan
pengumuman status aman

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 SPESIFICATION

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
120 PERBANDINGAN SPESIFIKASI MOTOR GRADER
Specification 120K / K2 120 120GC
Drive Type Tandem Tandem AWD Tandem AWD
Engine C7 (7.2 Litre) C7.1 (7.1 Litre) C4.4 (4.4 Litre)
Base Power: Emissions (1) 120K: 125 HP (93 kW) No AWD T3
130 HP (97 kW) 136 HP (101 kW)
120K2: 145 HP (108 kW)) 154 HP (115 kW)
Base Power: Emissions (2) & (3) 140 HP (104 kW) 145 HP (108 kW) 163 HP (121 kW)

Typically Equipped Weight App. 13 843 kg 16 000 kg 16 600 kg 16 100 kg (35,494 16 500 kg
(30,519 lb) (35,300 lb) (36,600 lb) lb) (36,376 lb)
Transmission Direct Drive Powershift Torque Convertor Powershift
Rear Axle Differential Lock / Unlock No-Spin Differential
Service Brakes Air actuated / Wet Disk Hydraulic actuated / Wet Disk Caliper Disc Brakes / Dry Disc
Hydraulic Pump Type (L/min) Variable Piston (0-210) Variable Piston (0-200) Variable Piston (0-155)
(1) Equivalent to U.S. EPA (1) Equivalent to U.S. EPA Tier 3 / EU Stage IIIA
Emission Standards Tier 3 / EU Stage IIIA (2) Meets India CEV Stage V emission standards
(3) U.S EPA Tier 4 Final and EU Stage V
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
120GC - Designed for the Life Cycle Value Segment
Operator Environment Options
• Base Cab
• Plus Cab
• * Canopy ROPs Engine
• 4 Cylinder C4.4
• 154 Net HP (115 kW)
• VHP and ECO Modes

Powertrain
* Canopy options FUW T3 version
• Powershift 6F / 3R
• Torque Convertor Drive

Differential & Brakes

• Service: Dry Caliper Disc
LCV Options
• Parking: Expanding Drum type
All Wheel Drive • Fixed Sideshift • No-Spin Differential
• Fixed Link-Bar
• Optional
• No Circle Drive Slip Clutch
• Not available T3
• consent
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written 10’ & from12’ Blade
PT Trakindo options (3.05 & 3.65 m)
Utama.
 Durability - Frame and Structures
 Cat 120 GC maintains durability in construction activities
 Rugged Structures for Long Life
 Drawbar, Circle, Moldboard (DCM)
 Linkbar Options
 Center Shift
 Standard DCM Range of Motion
 Front Axle

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 Durability - Drawbar, Circle and Moldboard
 Hardware Details: Adjustable wear strips between:

 Circle and Drawbar, Circle shoe and Circle

 Moldboard and Carrier, Lift and Drawbar Cylinder Sideshift Ball Joints
 Common parts with 120K and 120
 New 10’ and 12’ moldboard options
 Customer Benefits

 Low cost, replaceable vs refurbish parent iron

 Wear strips prevent costly parent iron wear out
 Replaceable wear material maintains factory tightness
 Shimable side shift wear strips eliminate blade chatter
 Designed for precise grading applications
 Added blade area coverage versatility

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
Durability - Moldboard
 Hardware Details
 More blade options
 10’ & 12’ (3.05 & 3.65 m) Basic Moldboard
 12’ (3.05 m) Plus Moldboard
 With standard end bits and thicker cutting edge

 Customer Benefits
 Optimum blade curvature for rolling action of material which saves fuel
 Rolling action also mixes material for a consistent finish grade
 Hardened side shift rails for long life
 Standard end bits to prevent wear on the end of the moldboard

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 Entry Level Technology Options – Digital Blade Slope
Hardware Details
 IMU sensor on drawbar
 Inertia Meter Unit
 Uses integrated machine display to show blade slope

Customer Benefits
 Entry level system to display blade slope
 Blade slope indication is often used far more than automatic
 Aids operator in maintaining consistent surface slope
 Reduces dependence on manual grade checking
 Ensure roads are being built with appropriate, consistent slope
Digital Blade Slope
 Use readout as benchmark Animation

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
Operating Costs – Extended Service Intervals
Tier 3 / CEV Stage V U.S. EPA Tier 4 Final / EU Stage V
Every 500 Service Hours Every 500 Service Hours
ENGINE OIL AND FILTER
FUEL FILTER/SECONDARY & TERTIARY FUEL FILTER/SECONDARY & TERTIARY
FUEL FILTER/PRIMARY & WATER SEPARATOR FUEL FILTER/PRIMARY & WATER SEPARATOR
Every 1000 Service Hours Every 1000 Service Hours
ENGINE OIL AND FILTER
TRANSMISSION OIL FILTER TRANSMISSION OIL FILTER
TRANSMISSION OIL TRANSMISSION OIL
DIFFERENTIAL OIL DIFFERENTIAL OIL
HYDRAULIC SYSTEM OIL FILTER HYDRAULIC SYSTEM OIL FILTER
ALL WHEEL DRIVE OIL FILTER
Every 2000 Service Hours Every 2000 Service Hours
CIRCLE DRIVE OIL CIRCLE DRIVE OIL
WHEEL BEARING OIL (NON-ALL WHEEL DRIVE) WHEEL BEARING OIL (NON-ALL WHEEL DRIVE)
TANDEM DRIVE OIL TANDEM DRIVE OIL
Every 6000 Service Hours Every 6000 Service Hours
HYDRAULIC SYSTEM OIL CHANGE HYDRAULIC SYSTEM OIL CHANGE
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 Operating Costs – Cooling Fan
On Demand Cooling Fan with Reverse Fan Option
Hardware Details
 Hydraulic Driven Fan
 Standard: On-Demand Fan
 Automatic fan speed dependent on cooling needs
 Optional - Reversible Fan
 Operator controlled mode for reverse clean purge
Customer Benefits
 Hydraulic driven fan lowers operating costs
 Adjustment maintenance free
 No belts to replace
 Less parasitic horsepower to drive fan, lowers fuel consumption
 Removal of material from the rear door intake screen to improve cooling airflow
 Reduce downtime
 Reduces under-hood heat for long component life
 Extend clean-out interval of cooling package

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 Comfort – Operator Environment Options
 All Cabs feature:
 Low Profile or High-Profile, ROPs or NON-ROPs, HVAC or No HVAC options
 Base Cab
 Wipers, intermittent, front
 Radio ready and converter group (24V to 12V)
 Cab Plus Enclosed Cab
 Includes Base cab features
 Fan and defroster, front and rear windows
 Sun shade, rear
 Lower & Rear / Wiper & Washer
 Canopy
 Open ROPs
Open ROPs Canopy

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 Comfort - Operator Environment
 Multiple seat options
 Standard
 Vinyl (PVC) covered, no suspension
 Mechanical suspension
 Vinyl covered
 Fold up arm rests
 Air suspension STANDARD MECHANICAL SUSPENSION
 Cloth covered
 Fold up arm rests
 Seat back angle adjustment
 Lumbar support
 Head rest

AIR SUSPENSION
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
Safety - Service Brakes
Dry Caliper Disc Brakes
 2 Service Brake Options with similar braking performance
 Brakes are located at each tandem wheel
 Hydraulically actuated
 Dry Caliper Disc Brakes - Standard
 Outboard caliper design
 Deliver dependable stopping power and longer life
 offers easy access, with improved serviceability
 Wet Disc Brakes - Optional
 Enclosed oil-bathed multi-disc service brakes
 Smooth, predictable braking and lower operating costs
Wet Disc Brakes
 Larger total brake surface areas
 Deliver dependable stopping power and longer life

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
Safety – Parking Brake
 Auto Park Brake - New
 Park brake automatically engages under certain conditions Disk Parking Brake

 Auto Park Engage Conditions

 After 5 seconds
 If service brake is not on
 Foot off pedal Park Brake
Transmission Output
 Machine is not moving or engine is not running.
 Park brake switch is in OFF position
 Direction lever is in NEUTRAL

 Auto Park Over ride

 After 1 second
 Directional gear selected
 Machine moving and engine speed greater than 850 rpm
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 Safety - Walkways & Grab Irons

 Hardware Details
 Grab irons and walkways located at all accessible areas
 Provides 3 points of safe contact

 Customer Benefits
 Prevents slips and falls when entering and exiting the cab and servicing the machine
 Serrated tandem housing walking platform

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
Versatility- Work Tools / Attachments
Rear Attachments Front Attachments
• Ripper Scarifier Combination • Front Blade (Straight & Angle)
‒ 5 ripper shank pockets • Attachments through aftermarket
‒ 9 scarifier shank pockets • Front Lift Group
• Tow Hitch • V & One-way Plows
• Front pin on Scarifier

Drawbar, Circle & Moldboard

• New 10’ Blade
• 12’ Blade

• New Mid Mount Scarifier

2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.
 ARIEF PRIYONO
APP ENGINEER / C&F
arif.priyono@trakindo.co.id

The content of this presentation may not be used, duplicated or transmitted

in any form without the written consent from PT Trakindo Utama.
2021 © PT Trakindo Utama. All rights reserved. The content of this presentation may not be used, duplicated or transmitted in any form without the written consent from PT Trakindo Utama.