Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

DN391B Led11-840 Psu D150 Alu WP GM

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

Lighting

GreenSpace G5
DN391B LED11/840 PSU D150 ALU WP GM

High-gloss high reflectance - Transparent bowl with white cover


- 65° -

GreenSpace Gen5 is a new LED downlight range combining light efficiency and
comfort with product diversity and system compatibility

Product data

General information Operating and electrical


Beam angle of light source 60 ° Input Voltage 220-240 V

Light source color 840 neutral white Input Frequency 50 or 60 Hz

Light source replaceable No Inrush current 2.2 A

Number of gear units 1 unit Inrush time 0.045 ms

Driver included Yes Power Factor (Min) 0.95

Optic type High-gloss high reflectance

Optical cover/lens type Transparent bowl with white cover Controls and dimming
Luminaire light beam spread 65° Dimmable No

Control interface -

Connection Push-in connector 6-pole Mechanical and housing


Protection class IEC Safety class I Housing Material Aluminum die cast

Glow-wire test Temperature 650 °C, duration 30 s Reflector material Polycarbonate aluminum coated

Flammability mark For mounting on normally flammable Optic material Polycarbonate


surfaces Optical cover/lens material Polycarbonate
CE mark CE mark Optical cover/lens finish Matte
Warranty period 5 years Overall length 0 mm

Constant light output No Overall width 0 mm

Number of products on MCB of 16 A type B 48 Overall height 100 mm

Light source engine type LED Overall diameter 162 mm

Datasheet, 2022, April 23 data subject to change


GreenSpace G5

Color Black and white Median useful life L80B50 43000 h

Median useful life L90B50 20000 h

Approval and application


Ingress protection code IP20/54 [ Finger-protected; dust Application conditions
accumulation-protected, splash-proof] Ambient temperature range -20 to +40 °C

Mech. impact protection code IK02 [ 0.2 J standard] Maximum dim level Not applicable

Initial performance (IEC compliant) Product data


Initial luminous flux (system flux) 1100 lm Full product code 911401581141

Luminous flux tolerance +/-10% Order product name DN391B LED11/840 PSU D150 ALU WP GM

Initial LED luminaire efficacy 116 lm/W Order code 911401581141


Init. Corr. Color Temperature 4000 K Numerator - Quantity Per Pack 1
Init. Color Rendering Index >80 Numerator - Packs per outer box 1
Initial chromaticity (0.38,0.38) SDCM<5 Material Nr. (12NC) 911401581141
Initial input power 9.5 W Net Weight (Piece) 0.420 kg
Power consumption tolerance +/-10%

Over time performance (IEC compliant)


Median useful life L70B50 50000 h

Dimensional drawing

DN391B LED11/840 PSU D150 ALU WP GM

© 2022 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or

completeness of the information included herein and shall not be liable for any action in reliance thereon. The

information presented in this document is not intended as any commercial offer and does not form part of any

quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered www.lighting.philips.com

trademarks of Koninklijke Philips N.V. 2022, April 23 - data subject to change


200
Dimensions in mm 288

Battery LED driver


IP20 74 74
IP20

30 32

!
C

430 300

The luminaire shall, under no circumstance,


be covered with thermal insulation matting or
1 Ø See table on 1st page similar material.

Trustsight pro ELP3


Battery

Inverter
Unswitched mains

Luminaire

Switched mains
Driver
DALI
2

Trustsight DALI ELD3


Battery

Inverter
Unswitched mains
DALI
Luminaire

Switched mains
Driver
DALI

3
4422 948 60644 2/10 2022-05-17
PSD-E PSD-E PSU-E/PSE-E
0.8Nm Touch & Dim
P1

P1
Ø 6-9 mm

DALI
DALI
2 x 0.50-1.5 mm2
20 9 0.8Nm

DA
N
DA
N PE L L
N Ls
DA
N
Dali
L

DALI
DALI
220-
240V
Ø 6-13 mm
2 x 0.75-2.5 mm2
N PE L 20 9
Ø 6-9 mm 20 9 N PE L
2 x 0.75-2.5 mm2 Ls N N
N
L
L
through-wiring possible through-wiring possible
4a 4b 4c

WIA-E (Interact) Optional: EWP, BWP


0.8Nm
through-wiring
P1
possible
Min. 2 x 0,75 mm2
Max. 2 x 1,50 mm2
Ø 9 - Ø13 mm 1
L N
9

18
3b
Min. 3 x 0,75 mm2
Max. 3 x 2,50 mm2 (solid)
Max. 3 x 1,50 mm2 (stranded)
Ø 8 - Ø10 mm
L 4
43

30 9 N
140
3 5
L
2
30
0.8Nm
3a N

TrustSight PRO ELP3


20 9
Unswitched mains
Ø 6-9 mm 220- 240V L
2 x 0.50-1.5 mm2 N

RD
Indicator LED
GN

P1

0.8Nm

6
4422 948 60644 3/10 2022-05-17
TrustSight DALI ELD3

Unswitched mains
220- 240V L
Ø 6-9 mm
2 x 0.50-1.5 mm2 DALI N
20 9 DA
DA
RD
Indicator LED
GN

P1

0.8Nm

TrustSight Basic ELB3


Battery

Unswitched mains
Inverter

Luminaire
Switched mains

driver
DALI
8

ELB3 connection Unswitched mains


Ø 6-9 mm
2 x 0.50-1.5 mm2

2x 0.8Nm
P1
20 9
Switched mains N
Ø 6-9 mm
2 x 0.75-2.5 mm2 L

20 9
L N
N sw L
P1
L
0.8Nm

9
4422 948 60644 4/10 2022-05-17

You might also like