Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    DBGVCC429 4C

    Uploaded by

    OFFICE DANAC
    The document provides testing instructions for a test stand for an engine pump. It lists 14 check points to test aspects of the pump such as injection lines, nozzle opening pressure, engine cycle, pump accessories, pump settings, and governor controls. It also lists applicable part numbers for gasket kits and accessory adjustments. The test stand is used to test and ensure proper functioning of the engine pump under different operating conditions and speeds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DBGVCC429 4C

    Uploaded by

    OFFICE DANAC
    66 views2 pages
    The document provides testing instructions for a test stand for an engine pump. It lists 14 check points to test aspects of the pump such as injection lines, nozzle opening pressure, engine cycle, pump accessories, pump settings, and governor controls. It also lists applicable part numbers for gasket kits and accessory adjustments. The test stand is used to test and ensure proper functioning of the engine pump under different operating conditions and speeds.

    Original Title

    DBGVCC429-4C

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides testing instructions for a test stand for an engine pump. It lists 14 check points to test aspects of the pump such as injection lines, nozzle opening pressure, engine cycle, pump accessories, pump settings, and governor controls. It also lists applicable part numbers for gasket kits and accessory adjustments. The test stand is used to test and ensure proper functioning of the engine pump under different operating conditions and speeds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views2 pages

    DBGVCC429 4C

    Uploaded by

    OFFICE DANAC
    The document provides testing instructions for a test stand for an engine pump. It lists 14 check points to test aspects of the pump such as injection lines, nozzle opening pressure, engine cycle, pump accessories, pump settings, and governor controls. It also lists applicable part numbers for gasket kits and accessory adjustments. The test stand is used to test and ensure proper functioning of the engine pump under different operating conditions and speeds.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    TEST STAND

    A. INJECilON LINES I.:). BY 20” LONG 4. CHECK POINT 2000


    l/16”
    8. TEST OIL TFMPERPTVRE CHECK POINT 1200
    IlO-115°F.
    C. NOZZLE OPFNING PRESSlJRE PSI 1. CHECK POINT
    2x10
    EWGYNE ~~~~~~~~~ CYCLE 4 ii. SET TORQUE SCREW
    PUMP ACXESSORIES _~ CHECK POINT--PART LOAD
    W. MINIMUM CRP.NKING SPEED DELIVERY 150
    A. AUTOMATICADVAWCE
    B. U. HIGH IDLE (WOT) 2380
    C. 3. iow IDLE 000
    D, P. TRANSFLR PUMP PRESSURE (WOT) liO0 17-22
    PllMP SETTINGS 2. TRANSFER PUMP PRESSURC (WOT)
    A. ROl.LER 10 RULI.ER DIHENSlOiN 2. GOVERNOR CIJT-OFF (% HI-IDLE DE!.) 2&O
    l"9CIO + .0005
    6. GOVERNOR LINKAGE GAP ,135 .TO .i55
    (USE GAGi NO. 13389. Xl.-133 tND OF GAG!) S. NAME PLAiE LEn SIDE VIEWING E.P.
    C. OPERATE PUMP A-r 1OOCl RPM (WOT*) FOR 10 MlNUTiS TO BillNG 1. TIMED LxF1’ SIDE VIEWING E.P.
    TO OPERATING TEMPERATURE AND CILEAR AIR FROM SYSTEM. u. TIMED TO CAP! (S?;AKi’ 03’ I~J~C’flO#j
    I’WOT- -YVlDE OPEN TIiR;)I-TLE) Y_ GOVERNOR CONTROL COVLH TO BE STAMPED VOLTS.
    I). CHECKFORMINIMU,W 15”i-itil.ll~NSFEFiPl~MPLiFTAT400RPM: M. NiJMRER ONE CYLINDER (FROM ENLI PLATE) 5 O’CIOCK.
    E. CHECK FOR MINIMUM CRANKING SPEED DELiVERY (SEE SlEP M X. GASKET KIT NO. 13692 APPL.ICABLE THIS PUMP
    F. CHECK TRANSFER I‘IMP PRCSSlJRE (WCT) (SEE STEPS P 8‘ 9) Y. ACCESSORY ADJUSTMENTS.
    G. AUTO AU\rANCE SPmi) RESPONSiVf
    a. ADVANCE MOVEMENT 5 ”
    b. SET HIGH IDLE (SEE STEP M)
    -_-_--
    RC%

    iR%J, cover hold dam

    SBAFT, drive
    SEAL, drive shaft

    IMi HpD. HEAD& ROTORASSY.


    1105 PLUNGER,rotor
    111,: wm,vent
    CRM RIXG
    SC&EW,hyd. heid plus
    wm, vent r1ire ret.
    SCREW,hyd. head plug
    RING, rotor ret,ainer
    AETAIXER, rotor

    WASHER,fuel. line COIJL


    PLUG, end plate

    _.,~_..“.

    I‘
    .-I__., -----._“.l__-

    --LI-.~..,---

    -^.-l_-._l--- II.-“-~_~-

    ,_--.. -----.-_

    __.,___ ._._”
    .__...-_.
    “I

    _-.-.-“-_-.--._. .“I- .._---.-- ..-

    CM, ‘Jhut-aff
    lmx ASSY., gopernor linkage
    SCREW, gov. hook adj.
    WAMER, gov. hook adj. ser.
    Y-Y

    PISTON, spring 12671


    SCREW,eamadvarlce 126y7t-------------B @ *

    HOUSl.NG, auto. advance


    WASHER,slide
    PISTOK, power 12623E 1 CIUXK, ball
    1.2629 I SPUNG, ball check sl;cp
    PLATE, auto. adve end a1507 1 SEAL, adv. clamp scnw

    SCREW,adv. end plate 125h7 I SCI&W&w,


    adv. body clamp
    I

    You might also like