Bosch Rexroth AG

Spare parts list Service Hydraulics

Glockeraustrasse 4

Material number: R902024039 89275 Elchingen

Germany
Drawing: R902007157
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
AA4VG125HWD1/32L-NSF52F001F-S

Status of version: 08/2023 Date: 08.08.2023

Page: 1

Pos. Material number Designation Quantity

1 R902199782 ROTARY GROUP 1 UNIT L

2 R902011331 CONTROL 1 UNIT L
3 R909609525 CONNECTION PLATE 1 UNIT L
4 R909606320 INTERNAL GEAR PUMP 1 UNIT L
5 R902033624 CONTROL MODULE 1 UNIT L
6 R902278268 MOUNTABLE FILTER 1 UNIT L
10 R902010541 HOUSING 1 UNIT
13 R902118633 PIVOT PIN 2 UNIT
14 R909405732 POITIONING PIN 1 UNIT
20 R909153378 SCREW PLUG 2 UNIT D
22 R909153371 SCREW PLUG 4 UNIT D
24 R909083229 SCREW PLUG 1 UNIT
25 R909085545 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902024039 89275 Elchingen

Germany
Drawing: R902007157
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
AA4VG125HWD1/32L-NSF52F001F-S

Status of version: 08/2023 Date: 08.08.2023

Page: 2

Pos. Material number Designation Quantity

26 R909153572 SCREW PLUG 1 UNIT

28 R909426701 NOZZLE 2 UNIT
31 R913016373 SLOTTED SPRING PIN 2 UNIT
32 R909151692 SCREW PLUG 2 UNIT D
35 R909153364 SCREW PLUG 2 UNIT D
37 R909156570 SCREW PLUG 1 UNIT
46 R909154982 SETSCREW 1 UNIT
47 R909087405 SEALING NUT 1 UNIT D
48 R909153339 SCREW PLUG 1 UNIT D
49 R909426707 NOZZLE 1 UNIT
63 R909154478 SCREW PLUG 2 UNIT D
98 R902095658 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902024039 89275 Elchingen

Germany
Drawing: R902007157
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
AA4VG125HWD1/32L-NSF52F001F-S

Status of version: 08/2023 Date: 08.08.2023

Page: 3

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902199782 89275 Elchingen

Germany
Drawing: RA86753686
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 4

Pos. Material number Designation Quantity

1 R902105942 ROTARY GROUP 1 UNIT L

2 R902195233 CONTROL PLATE, LEFT-HAND ROTATION 1 UNIT
12 R902287483 CRADLE 1 UNIT
13 R909449034 SLIDER 1 UNIT
14 R909921707 DRIVE SHAFT 1 UNIT
17 R902192961 WIRE 2 UNIT
26 R913062815 BEARING SHELL PAIR 1 UNIT
31 R902603914 CYL. ROLLER BEARING 1 UNIT
32 R909830578 CAGE PAIR 1 UNIT
36 R909084416 RETAINING RING 1 UNIT
37 R902600002 RETAINING RING 2 UNIT
38 R902601821 ROTARY SHAFT LIP-TYPE SEAL 1 UNIT D
98 R902002391 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902199782 89275 Elchingen

Germany
Drawing: RA86753686
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 5

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902105942 89275 Elchingen

Germany
Drawing: RA68728510
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 6

Pos. Material number Designation Quantity

1 R902105527 CYLINDER 1 UNIT

2 R902076829 PISTON PAD 9 UNIT
11 R902192959 CUP-SPRING STACK 1 UNIT
20 R909432505 SHIM RING 1 UNIT
20 R909432506 SHIM RING 1 UNIT
20 R909432507 SHIM RING 1 UNIT
20 R909432508 SHIM RING 1 UNIT
24 R902205456 RETAINING PLATE 1 UNIT
25 R902152626 RETAINING BALL 1 UNIT
27 R902105941 WASHER 2 UNIT
29 R909435465 COMPRESSION SPRING 1 UNIT
41 R909083405 RETAINING RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902105942 89275 Elchingen

Germany
Drawing: RA68728510
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 08/2023 Date: 08.08.2023

Page: 7

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902011331 89275 Elchingen

Germany
Drawing: R902010594
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 08/2023 Date: 08.08.2023

Page: 8

Pos. Material number Designation Quantity

1 R902025586 POSITIONING PISTON 1 UNIT L

3 R902010571 COVER 1 UNIT
4 R902010572 COVER 1 UNIT
16 R909157477 HEXAGON NUT 1 UNIT
17 R909083038 SOCKET HEAD CAP SCREW 8 UNIT
20 R909085360 O-RING 2 UNIT D
30 R902600839 ROD GUIDANCE RING 2 UNIT
31 R902600272 ROD SEAL 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902011331 89275 Elchingen

Germany
Drawing: R902010594
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 08/2023 Date: 08.08.2023

Page: 9

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902025586 89275 Elchingen

Germany
Drawing: R902025542
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 08/2023 Date: 08.08.2023

Page: 10

Pos. Material number Designation Quantity

1 R902205355 POSITIONING PISTON 1 UNIT

2 R909449241 ROD 1 UNIT
5 R902043149 RING 2 UNIT
5 R902020493 RING 2 UNIT
5 R902020494 RING 2 UNIT
5 R902020495 RING 2 UNIT
5 R902020496 RING 2 UNIT
5 R902020497 RING 2 UNIT
5 R902020498 RING 2 UNIT
5 R902029756 RING 2 UNIT
5 R902029757 RING 2 UNIT
6 R902600767 LOCATING RING 2 UNIT
7 R902272200 SPRING DISK 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902025586 89275 Elchingen

Germany
Drawing: R902025542
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 08/2023 Date: 08.08.2023

Page: 11

Pos. Material number Designation Quantity

9 R909435004 COMPRESSION SPRING 2 UNIT

10 R909435005 COMPRESSION SPRING 2 UNIT
15 R902280447 RETAINING RING 2 UNIT
19 R909086333 O-RING 1 UNIT D
23 R909449252 SPRING DISK 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902025586 89275 Elchingen

Germany
Drawing: R902025542
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 08/2023 Date: 08.08.2023

Page: 12

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909609525 89275 Elchingen

Germany
Drawing: RA63625801
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 08/2023 Date: 08.08.2023

Page: 13

Pos. Material number Designation Quantity

1 R902603817 DELIVERY-VALVE ASSEMBLY 2 UNIT L

2 R902215658 PRESSURE RELIEF VALVE 1 UNIT L
3 R909433834 PRESSURE CUT-OFF VALVE 1 UNIT L
5 R902278459 CONNECTION PLATE 1 UNIT
6 R902283573 BUSHING 1 UNIT
7 R909083145 SOCKET HEAD CAP SCREW 4 UNIT
9 R909830217 O-RING 1 UNIT D
11 R909831320 DOUBLE BREAK-OFF PLUG 1 UNIT
12 R909151692 SCREW PLUG 1 UNIT D
26 R909086333 O-RING 2 UNIT D
35 R909154478 SCREW PLUG 2 UNIT D
43 R909432774 BUSHING 1 UNIT
44 R902283574 BUSHING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909609525 89275 Elchingen

Germany
Drawing: RA63625801
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 08/2023 Date: 08.08.2023

Page: 14

Pos. Material number Designation Quantity

48 R909831319 DOUBLE BREAK-OFF PLUG 3 UNIT

55 R913064588 R-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909609525 89275 Elchingen

Germany
Drawing: RA63625801
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 08/2023 Date: 08.08.2023

Page: 15

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902603817 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: DELIVERY-VALVE ASSEMBLY

Status of version: 08/2023 Date: 08.08.2023

Page: 16

Pos. Material number Designation Quantity

1 R901162844 PRESSURE RELIEF VALVE 1 UNIT

98 R961000764 SEAL KIT 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8

Material number: R961000764 97816 Lohr

Germany
Drawing: R961003655
Designation: SEAL KIT

Status of version: 08/2023 Date: 08.08.2023

Page: 17

Pos. Material number Designation Tech.Pos. Quantity

37 O-RING 5 UNIT
40 CORRUGATED CARD BOARD BOX 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Bgm.-Dr.-Nebel-Str. 8

Material number: R961000764 97816 Lohr

Germany
Drawing: R961003655
Designation: SEAL KIT

Status of version: 08/2023 Date: 08.08.2023

Page: 18

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902215658 89275 Elchingen

Germany
Drawing: R902215657
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 19

Pos. Material number Designation Quantity

1 R902197130 SCREW PLUG 1 UNIT

2 R902197131 ADJUSTING SCREW 1 UNIT
3 R909435899 VALVE SPOOL 1 UNIT
4 R902010336 SPRING DISK 1 UNIT
5 R909440765 COMPRESSION SPRING 1 UNIT
8 R909083761 O-RING 1 UNIT D
9 R909153271 SEALING NUT 1 UNIT D
98 R902166399 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902215658 89275 Elchingen

Germany
Drawing: R902215657
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 20

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909433834 89275 Elchingen

Germany
Drawing: R909731064
+49 (0)7308/82-2126
Designation: PRESSURE CUT-OFF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 21

Pos. Material number Designation Quantity

1 R909432376 SCREW PLUG 1 UNIT

2 R909426552 VALVE BUSHING 1 UNIT
3 R909432301 CONTROL PISTON 1 UNIT
4 R909432163 PISTON 1 UNIT
5 R909432164 VALVE SPOOL 1 UNIT
6 R909432775 VALVE SEAT 1 UNIT
7 R902168277 COMPRESSION SPRING 1 UNIT
8 R902049851 SPRING DISK 2 UNIT
9 R909432167 ADJUSTING SCREW 1 UNIT
10 R909083757 O-RING 1 UNIT D
14 R909152707 SEALING NUT 1 UNIT D
15 R909086380 O-RING 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909433834 89275 Elchingen

Germany
Drawing: R909731064
+49 (0)7308/82-2126
Designation: PRESSURE CUT-OFF VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 22

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909606320 89275 Elchingen

Germany
Drawing: R902078145
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 08/2023 Date: 08.08.2023

Page: 23

Pos. Material number Designation Quantity

1 R902078032 INTERNAL GEAR PUMP 1 UNIT L

2 R902272221 WEAR PLATE 1 UNIT
3 R913007069 HOLDING PLUG 3 UNIT
98 R902002413 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R909606320 89275 Elchingen

Germany
Drawing: R902078145
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 08/2023 Date: 08.08.2023

Page: 24

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902078032 89275 Elchingen

Germany
Drawing: R909723644
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 08/2023 Date: 08.08.2023

Page: 25

Pos. Material number Designation Quantity

1 R902260600 PUMP COVER 1 UNIT

3 R902283573 BUSHING 1 UNIT
5 R902099580 PLUG-IN SHAFT 1 UNIT
7 R902006261 WHEEL SET 1 UNIT
8 R902105557 PARALLEL KEY 1 UNIT
9 R909154019 SNAP RING 1 UNIT
10 R909083089 SOCKET HEAD CAP SCREW 4 UNIT
12 R913026809 KANTSEAL 1 UNIT D

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902078032 89275 Elchingen

Germany
Drawing: R909723644
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 08/2023 Date: 08.08.2023

Page: 26

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902033624 89275 Elchingen

Germany
Drawing: R909726028
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 08/2023 Date: 08.08.2023

Page: 27

Pos. Material number Designation Quantity

1 R902281000 BASIC UNIT 1 UNIT L

2 R902008033 FEEDBACK LEVER 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902033624 89275 Elchingen

Germany
Drawing: R909726028
+49 (0)7308/82-2126
Designation: CONTROL MODULE

Status of version: 08/2023 Date: 08.08.2023

Page: 28

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281000 89275 Elchingen

Germany
Drawing: RA79505206
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 29

Pos. Material number Designation Quantity

1 R902272861 HOUSING 1 UNIT

2 R902027797 CONTROL SLEEVE 1 UNIT
3 R902076994 CONTROL SHAFT 1 UNIT
4 R909650254 SPRING BUSH 1 UNIT
5 R909421991 COMPRESSION SPRING 1 UNIT
6 R909426570 ECCENTRIC PIN 1 UNIT
7 R902076996 COVER 1 UNIT
9 R909400523 LEVER 1 UNIT
12 R909083028 SOCKET HEAD CAP SCREW 4 UNIT
13 R909083021 SOCKET HEAD CAP SCREW 2 UNIT
14 R909083012 SOCKET HEAD CAP SCREW 1 UNIT
15 R909083183 SOCKET HEAD CAP SCREW 2 UNIT
16 R909152707 SEALING NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281000 89275 Elchingen

Germany
Drawing: RA79505206
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 30

Pos. Material number Designation Quantity

17 R909087905 O-RING 1 UNIT D

18 R909086250 O-RING 1 UNIT D
19 R909083757 O-RING 1 UNIT D
20 R909086333 O-RING 4 UNIT D
21 R909086178 O-RING 2 UNIT D
23 R909085709 O-RING 1 UNIT D
24 R902603686 SEALING PLUG 5 UNIT
27 R909153380 SHIM RING 1 UNIT
28 R909086753 SCREW PLUG 1 UNIT
29 R909830413 NEEDLE-ROLLER 1 UNIT
30 R913009677 STRAIGHT PIN 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281000 89275 Elchingen

Germany
Drawing: RA79505206
+49 (0)7308/82-2126
Designation: BASIC UNIT

Status of version: 08/2023 Date: 08.08.2023

Page: 31

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902278268 89275 Elchingen

Germany
Drawing: RA76001256
+49 (0)7308/82-2126
Designation: MOUNTABLE FILTER

Status of version: 08/2023 Date: 08.08.2023

Page: 32

Pos. Material number Designation Quantity

2 R902041128 COLD-START VALVE 1 UNIT L

3 R902200688 FILTER HEAD 1 UNIT
4 R902067322 FILTER HOUSING 1 UNIT D
5 R902603243 FILTER ELEMENT 1 UNIT
6 R902601388 SPRING 1 UNIT
7 R909085571 O-RING 1 UNIT
8 R909831317 DOUBLE BREAK-OFF PLUG 1 UNIT
9 R909083769 O-RING 3 UNIT
10 R909083060 SOCKET HEAD CAP SCREW 4 UNIT
12 R913059272 SCREW PLUG 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902278268 89275 Elchingen

Germany
Drawing: RA76001256
+49 (0)7308/82-2126
Designation: MOUNTABLE FILTER

Status of version: 08/2023 Date: 08.08.2023

Page: 33

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902041128 89275 Elchingen

Germany
Drawing: RA64308824
+49 (0)7308/82-2126
Designation: COLD-START VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 34

Pos. Material number Designation Quantity

2 R902041295 VALVE SPOOL 1 UNIT

3 R902278228 VALVE SEAT 1 UNIT
4 R909831979 O-RING 1 UNIT D
5 R909651440 COMPRESSION SPRING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902041128 89275 Elchingen

Germany
Drawing: RA64308824
+49 (0)7308/82-2126
Designation: COLD-START VALVE

Status of version: 08/2023 Date: 08.08.2023

Page: 35

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Dr. Steffen Haack (Vorsitzender / President), Roland Bittenauer, Thomas Fechner, Holger von Hebel, Reinhard Schäfer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dr. Markus Forschner