Data sheet 3UG4615-1CR20

Digital monitoring relay 3-phase supply voltage Phase sequence can

be activated Phase failure 3 x 160 to 690 V 50 to 60 Hz AC
Undervoltage and overvoltage 160-690 V Hysteresis 1-20 V 0-20 s
each for Umin and Umax 1 CO for Umin 1 CO for Umax screw
terminal Successor product for 3UG3041-1BP50

Product brand name SIRIUS

Product designation Network monitoring relay with digital setting
Design of the product 5 functions
Product type designation 3UG4

General technical data

Product function Phase monitoring relay
Display version LED No
Design of the display LCD
Insulation voltage
● for overvoltage category III according to IEC
60664
— with degree of pollution 3 rated value 690 V
Degree of pollution 3
Type of voltage
● for monitoring AC
● of the control supply voltage AC
Surge voltage resistance rated value 6 kV

3UG4615-1CR20 Subject to change without notice

Page 1/6 09/23/2019 © Copyright Siemens
 Protection class IP IP20
Shock resistance
● acc. to IEC 60068-2-27 sinusoidal half-wave 15g / 11 ms
Vibration resistance
● acc. to IEC 60068-2-6 1 ... 6 Hz: 15 mm, 6 ... 500 Hz: 2g
Mechanical service life (switching cycles)
● typical 10 000 000
Electrical endurance (switching cycles)
● at AC-15 at 230 V typical 100 000
Thermal current of the switching element with 5 A
contacts maximum
Reference code acc. to DIN 40719 extended K
according to IEC 204-2 acc. to IEC 750
Reference code acc. to DIN EN 81346-2 K
Reference code acc. to DIN EN 61346-2 K
Relative repeat accuracy 1 %

Product Function
Product function
● undervoltage detection Yes
● Overvoltage detection Yes
● phase sequence recognition Yes
● Phase failure detection Yes
● Phase unbalance Yes
● Overvoltage detection 3 phase Yes
● undervoltage detection 3 phases Yes
● Voltage window recognition 3 phase Yes
● Adjustable open/closed-circuit current principle Yes
● Auto-reset Yes

Control circuit/ Control

Control supply voltage at AC
● at 50 Hz rated value 160 ... 690 V
● at 60 Hz rated value 160 ... 690 V
Operating range factor control supply voltage rated
value at AC at 50 Hz
● initial value 1
● Full-scale value 1
Operating range factor control supply voltage rated
value at AC at 60 Hz
● initial value 1
● Full-scale value 1

Measuring circuit
Adjustable response delay time

3UG4615-1CR20 Subject to change without notice

Page 2/6 09/23/2019 © Copyright Siemens
 ● with lower or upper limit violation 0.1 ... 20 s
Accuracy of digital display +/-1 digit

Precision
Relative metering precision 5 %

Auxiliary circuit
Number of NC contacts
● delayed switching 0
Number of NO contacts
● delayed switching 0
Number of CO contacts
● delayed switching 2
Operating frequency with 3RT2 contactor maximum 5 000 1/h

Main circuit
Number of poles for main current circuit 3

Outputs
Ampacity of the output relay at AC-15
● at 250 V at 50/60 Hz 3 A
● at 400 V at 50/60 Hz 3 A
Ampacity of the output relay at DC-13
● at 24 V 1 A
● at 125 V 0.2 A
● at 250 V 0.1 A
Operating current at 17 V minimum 5 mA
Continuous current of the DIAZED fuse link of the 4 A
output relay

Electromagnetic compatibility
Conducted interference
● due to burst acc. to IEC 61000-4-4 2 kV
● due to conductor-earth surge acc. to IEC 2 kV
61000-4-5
● due to conductor-conductor surge acc. to IEC 1 kV
61000-4-5
Field-bound parasitic coupling acc. to IEC 61000-4-3 10 V/m
Electrostatic discharge acc. to IEC 61000-4-2 6 kV contact discharge / 8 kV air discharge

Galvanic isolation
Galvanic isolation
● between entrance and outlet Yes
● between the outputs Yes
● between the voltage supply and other circuits Yes

Connections/ Terminals

3UG4615-1CR20 Subject to change without notice

Page 3/6 09/23/2019 © Copyright Siemens
 Product function
● removable terminal for auxiliary and control Yes
circuit
Type of electrical connection screw-type terminals
Type of connectable conductor cross-sections
● solid 1x (0.5 ... 4 mm2), 2x (0.5 ... 2.5 mm2)
● finely stranded with core end processing 1x (0.5 ... 2.5 mm2), 2x (0.5 ... 1.5 mm2)
● at AWG conductors solid 2x (20 ... 14)
● at AWG conductors stranded 2x (20 ... 14)
Connectable conductor cross-section
● solid 0.5 ... 4 mm²
● finely stranded with core end processing 0.5 ... 2.5 mm²
AWG number as coded connectable conductor cross
section
● solid 20 ... 14
● stranded 20 ... 14
Tightening torque
● with screw-type terminals 0.8 ... 1.2 N·m

Installation/ mounting/ dimensions

Mounting position any
Mounting type snap-on mounting
Height 92 mm
Width 22.5 mm
Depth 91 mm
Required spacing
● with side-by-side mounting
— forwards 0 mm
— Backwards 0 mm
— upwards 0 mm
— downwards 0 mm
— at the side 0 mm
● for grounded parts
— forwards 0 mm
— Backwards 0 mm
— upwards 0 mm
— at the side 0 mm
— downwards 0 mm
● for live parts
— forwards 0 mm
— Backwards 0 mm
— upwards 0 mm
— downwards 0 mm

3UG4615-1CR20 Subject to change without notice

Page 4/6 09/23/2019 © Copyright Siemens
 — at the side 0 mm

Ambient conditions
Installation altitude at height above sea level
● maximum 2 000 m

Certificates/ approvals
General Product Approval EMC Declaration of Conformity
Miscellaneous

Test Certificates Marine / Shipping other Railway

Type Test Certific- Special Test Certi- Confirmation Vibration and Shock
ates/Test Report ficate

Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
www.siemens.com/sirius/catalogs
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3UG4615-1CR20
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3UG4615-1CR20
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3UG4615-1CR20
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3UG4615-1CR20&lang=en

3UG4615-1CR20 Subject to change without notice

Page 5/6 09/23/2019 © Copyright Siemens
 22,5 86
7 65
4 5

L1 L2 L3

SIRIUS
15x110
68,2

120

74

83
92
12 11 14

22 21 24

last modified: 09/23/2019

3UG4615-1CR20 Subject to change without notice

Page 6/6 09/23/2019 © Copyright Siemens