LESSON 1: EXOGENIC PROCESS

Exogenic processes are interconnected with the atmosphere, hydrosphere, and biosphere, and
include the processes of weathering, erosion, transportation, and deposition. Its primary source is
the energy coming from the sun which drives the weather. While the heat produced inside Earth
that drives endogenic processes is enormous, it is much less powerful than the energy Earth
receives from the sun. Earth's internal heat forms the mountains while the sun's energy, which is
responsible for exogenic processes, slowly and steadily tears the landforms down.
The Earth is constantly changing or altered physically as we have observed. The changes driven
by different forces of nature create new land forms. One of these forces is weathering. This
process includes degradation or breaking down of rocks into smaller segments known as
sediments. It occurs when mechanical force is applied on rocks or through chemical reactions
happening on the surface or within the rocks.
In this lesson, you are going to describe how rocks undergo weathering and the different agents
that cause weathering on rocks.
WEATHERING
Weathering is the process of breakdown of rocks at the Earth’s surface, by the action of water,
ice, acids, salts, plants, animals, gravity and changing temperatures. There are three types of
weathering: physical weathering, chemical weathering, and biological weathering.
Agents of Weathering
1. Water
Either in liquid or solid form is one of the agents of mechanical weathering. In liquid
form, it seeped into cracks and crevices of rocks and when the temperature dropped, it
freezes and definitely will expand in the form of ice. The ice then works as a wedge
which slowly widens the cracks and splits the rock. When the ice melts, the liquid water
performs the act of erosion by carrying away the tiny rock fragments lost in the split.

2. Salt
In the process of haloclasty, salts served as an agent of weathering. Saltwater sometimes
gets into the cracks and pores of rock. When it evaporates, salt crystals are left behind
and grow in the cracks and pores which caused pressure on the rock and slowly break it
apart.

3. Temperature
Temperature changes can also contribute to weathering through the process called
thermal stress. During thermal stress, rock tend to expand with heat and contract with low
temperature. As this happens repeatedly, the structure of the rock weakens and over time
crumbles.

4. Plants
Plants also served as agents of weathering. Its contribution take place when the seed of a
tree being spread in the environment sprout in soil that has collected in a cracked rock.
As the roots grow, they widen the cracks, eventually breaking the rock into pieces. Over
time, trees can break apart even large rocks. Even small plants, such as mosses, can
enlarge tiny cracks as they grow.

5. Animals
Animals that tunnel underground, such as moles and prairie dogs, also work to break
apart rock and soil. Other animals dig and trample rock aboveground, causing rock to
slowly crumble.
Types of Weathering

A. Physical Weathering
Physical weathering is caused by the effects of changing temperatures on rocks,
causing the rock to break apart. The process is sometimes assisted by water. It happens
especially in places where there is little soil and few plants grow, such as in mountain
regions and hot deserts. It occurs either through repeated melting and freezing of water
(mountains and tundra) or through expansion and contraction of the surface layer of rocks
that are baked by the sun (hot deserts). There are two main types of physical weathering:
1. Abrasion. It occurs when rocks surface is frequently exposed to water, wind and
gravity.
2. Freeze-thaw. It occurs when water continually seeps into cracks, freezes and
expands, eventually breaking the rock apart. It occurs in mountainous regions like the
Alps or Snowdonia. It occurs through the following process:
Rainwater or snow- melt collects in cracks in the rocks→ at night the temperature
drops and the water freezes and expands→ the increases in volume of the ice exerts
pressure on the cracks in the rock, causing them to split further open→ during the day
the ice melts and the water seeps deeper into the cracks → at night, the water freezes
again.
3. Exfoliation. It can happen as cracks develop parallel to the land surface as a
consequence of the reduction in pressure during uplift and erosion. It occurs typically
in upland areas where there are exposures of uniform coarsely crystalline igneous
rocks. The following are the process of exfoliation.
The rock mass at depth is under high pressure from underlying rocks. It tends to
be uniform and lack fractures. → As progressive erosion occurs, the rock mass is
subjected to progressively lower pressure of overlying rocks which leads to tension in
directions at right angles to the land surface → this tension is relieved by formation of
cracks which follow the land surface. They are relatively flat on plateaus but can be
steep on the flanks of mountains which are called exfoliation domes → once the crack
is developed; water enters and causes chemical weathering leading to the formation of
new low- density minerals. This enhances the cracks and encourages slabs of rock to
detach from the surface.

B. Chemical Weathering
Chemical weathering is caused by rainwater reacting with the mineral grains in
rocks to form new minerals (clays) and soluble salts. These reactions occur particularly
when the water is slightly acidic. These chemical processes need water, and occur more
rapidly at higher temperature, so warm, damp climates are best. Chemical weathering
(especially hydrolysis and oxidation) is the first stage in the production of soils.

There are different types of chemical weathering, the most important are:
1. Carbonation – carbon dioxide in the air dissolves in rainwater and becomes weakly
acidic. This weak “carbonic acid” can dissolve limestone as it seeps into cracks and
cavities. Over many years, solution of the rock can form spectacular cave systems.

2. Hydrolysis – the breakdown of rock by acidic water to produce clay and soluble
salts. Hydrolysis takes place when acid rain reacts with rock-forming minerals such
as feldspar to produce clay and salts that are removed in solution. The only common
rock-forming mineral that is not affected is quartz, which is a chemically resistant
mineral. Therefore, quartz and clay are the two of the most common minerals in
sedimentary rocks.
3. Hydration – a type of chemical weathering where water reacts chemically with the
rocks, modifying its chemical structure. Example: H2O (water) is added to CaSO4
(calcium sulfate) to create CaSO4 + 2H2O (calcium sulfate dihydrate). It changes
from anhydrite to gypsum.

4. Oxidation – the breakdown of rock by oxygen and water, often giving iron- rich
rocks a rusty-colored weathered surface.

C. Biological Weathering
Biological weathering of rocks occurs when rocks are weakened by different
biological agents like plants and animals. When plant roots grow through rocks, it creates
fracture and cracks that result eventually to rock breakage. It can be classified into:

1. Biological Weathering by Physical Means. Burrowing animals like shrews, moles

and earthworms create holes on the ground by excavation and move the rock
fragments to the surface. These fragments become more exposed to other
environmental factors that can further enhance their weathering. Furthermore,
humans also indirectly contribute to biological weathering by different activities that
cause rocks to break.

2. Biological Weathering by Chemical Compounds. Some plants and animals also

produced acidic substances that react with the rock and cause its slow disintegration.

Most of the time, physical and chemical weathering occur simultaneously in

disintegrating the rocks to form sediments. However, rock types do not weather at the
same rate when exposed to the surface. Soft rocks like shale weather faster than hard
rocks like sandstone. This creates indentations in rock slopes composed of alternating
soft and hard rock layers.

Weathering is an important process in the formation of soil. The products of

weathering, along with organic matter, form the soils that host the primary producers
that sustain life on Earth.

Resources:
Earth Science for STEM Quarter 2 – Module 1: Weathering Cited at:
https://depedtambayan.net/wp-content/uploads/2021/11/earthscienceforstem_q2_mod
1_weathering_v2.pdf
Olivar II, JS et. al (2018). Exploring Life through Sciences Series: Earth Science