MR59 Ball probe moisture meter with Bluetooth

P/N: MR59
Copyright
© 2021, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: MR59
Commit: 78765
Language: en-US
Modified: 2021-08-19
Formatted: 2021-08-19
Website
http://www.flir.com
Customer support
http://support.flir.com
Disclaimer
Specifications subject to change without further
notice. Camera models and accessories subject
to regional market considerations. License
procedures may apply. Products described herein
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any
questions.
General description
Part number MR59
Part name Ball probe moisture meter with Bluetooth

The MR59 is the right choice for professionals looking for a cost effective, rugged and reliable pin-less
moisture meter. The Ball tip design makes it easy to run over, and around objects on the measuring
surface. This combined with the non-invasive measurement principle, allows you to cover a large target
area in short time without leaving a mark. Use with the optional MR04 extension pole to reduce the
need for a ladder, or to optimize ergonomics for ‘high’ and ‘low’ measuring targets.
Don’t’ underestimate remediation work scope due to hidden moisture problems! Identify potential
moisture problems not visible on the surface, as deep as 100 mm (4 in.) depending on the target
material.
Connect via FLIR MeterLink protocol to the FLIR Tools App on your mobile iOS device and display
current relative moisture content (0-100%) together with min and max readings. Ideal for building
inspectors, moisture remediation technicians, pest control professionals and residential flooring
contractors.
• Relative measurement- Range 0 to 100 %
• Work Light
• Large display with backlight
• Moisture level Alert setting

Measurement
Measurement Range 0% to 100%

Measurement Accuracy Relative measurement

Measurement detection depth Sensing depth up to 100 mm (4.0 in.), depending

on material under test.

Meter data
Work light White LED

Display Backlit LCD

Measurement Principle Capacitance ball sensor (non-invasive)

1 (4) www.flir.com
 MR59 Ball probe moisture meter with Bluetooth

P/N: MR59 Meter data

© 2021, FLIR Systems, Inc. Warranty https://www.flir.com/testwarranty
#MR59; r. 78765; en-US
Calibration cycle N/A

Certifications
Certifications CE, RCM

Power system
Power requirements 9V battery (rear compartment)

Battery life 40 hours typical, W.O Worklight

Battery status indicator 4 Bar battery icon (100% to empty)

Auto Power Off (APO) After 30 minutes

Environmental data
Drop test 2 m (6.6 ft.)

Ingress Protection Rating IP40

Operating RH/ Temperature 90%, 0-30°C (32-86°F)

75%, 30-40°C (86-104°F)
45%, 40-50°C (104-122°F)

Physical data
Weight 245 g (8.6 oz)

Dimensions (H × W × L) 240.5 x 67 x 38 (9.5 x 2.6 x 1.5 in.)

Material Impact resistant plastic

Color Black

Shipping information

Packaging type Gift box with colored sleeve

Packaging contents
• MR59 Non-invasive Ball type moisture meter
with BLE connectivity
• Pouch • 1 × 9V alkaline battery
• Quick Start manual
• Warranty card
• Line card
Packaging weight 0.37 kg (0.82 lb.)

Packaging dimensions (H × W × L) 15.0 × 7.9 × 28.7 (5.9 × 3.1 × 11.3 in.)

Carton weight 6.6 kg (14.6 lb.)

Carton dimensions (H × W ×L) 47 × 31 × 41.5 cm (18.5 × 12.2 × 16.3 in.)

Carton quantity 15

EAN-13 0793950370599
UPC-12 793950370599
Country of origin China

Tariff code 9027.80.4560

Technical support
Website http://support.flir.com

Supplies & accessories:

• MR04; Extension pole

2 (4) www.flir.com
 Teledyne FLIR LLC
9 Townsend West, Nashua NH 03063 / Phone: 603.324.7800 / Fax: 603.324.7864

Declaration of Conformity
Extech Model: MR59
Description: Pinless Moisture Meter w/BT
Date of Issue: 12-Jul-21
We, Teledyne FLIR LLC, 9 Townsend West, Nashua, NH 03063 declare that a
sample of the product listed above has been tested by a third party for CE marking

EMC Directive: 2014/30/EU

Report Number: CE180815N040
RM180815N040
Report Date of Issue: 9/27/2018
Standards:
EN 61326-1:2013
EN 61326-2-2:2013
DRAFT EN 301 489-1 V2.2.0 (2017-03)
DRAFT EN 301 489-17 V3.2.0 (2017-03)

RED Directive: 2014/53/EU

Report Number: RE 180815N040
Report Date of Issue: 9/28/2018
Standards:
EN 300 328 V2.1.1 (2016-11)

RoHS Directive: EU DIrective 2015/863/EU (RoHS 3)

The test reports show that the product fulfills the requirement in the EC EMC Directive, RED Directive, and
RoHS Directive for CE Marking. On this basis, together with the manufacturer's own documented
production control, the manufacturer (or his European authorized representative) can in his EC Declaration
of Conformity verify compliance with the EC EMC Directive, RED Directive, and RoHS Directive.

Mark Sultzbach / QA Manager

Taipei, Taiwan July 28, 2021

UK Declaration of Conformity
Product: FLIR MR59
Name and address of the manufacturer: Teledyne FLIR LLC,
9 Townsend West,
Nashua, NH 03063
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration: FLIR MR59.
The object of the declaration described above is in conformity with the relevant statutory requirements
applicable to the specific product:

Standards review between UK and EU

UK legislation refr. UK designated EU regulation refr. EU harmonised standard
standard*
EMC EMC
S.I. 2016 No. 1091 EN 61326-1:2013 2014/30/EU EN 61326-1:2013
S.I. 2016 No. 1091 EN 61326-1:2013 2014/30/EU EN 61326-2-2:2013
S.I. 2016 No. 1091 EN 301 489-1 V2.2.0 2014/30/EU DRAFT EN 301 489-1 V2.2.0
(2017-03)
S.I. 2016 No. 1091 EN 301 489-17 V3.2.0 2014/30/EU DRAFT EN 301 489-17 V3.2.0
(2017-03)
Radio equipment (RE) RED
S.I. 2017 No.1206 ETSI EN 300 328 v2.1.1 2014/53/EU (RED) EN 300 328 V2.1.1 (2016-11)

RoHS
S.I. 2012 No. 3032 EN 50581:2012 2015/65/EU (RoHS) EN 50581:2012

* https://www.gov.uk/guidance/designated-standards
Designated standards: EMC – consolidated list, version 1, 1 January 2021
Designated standards: radio equipment – consolidated list, version 1, 1 January 2021.
Designated standards: RoHS – consolidated list, version 1, 1 January 2021

FLIR Commercial Systems

Quality Assurance

Hank Tsai
Quality Manager