EDUCATION SKILLS

B.Tech
U.I.E.T, Kurukshetra University
2018 - 2021, CGPA - 6.61/10
Courses
Electronic and Communication Engineering
Diploma
Government Polytechnic Sonipat, Haryana
2015 - 2018, Percentage - 63.95% COLLEGE CLUB
Courses
Robotics (2019 - 2019)
My Role in the robotics club was as a interested student, here i learn a lots
Electronic and Communication Engineering
of method and sharing knowledge, how to make robotics by using Arduino
COLLEGE PROJECT EXPERIENCE and how to do soldering and many more things.

Minor project WORKSHOPS

Attended a workshop on AUTONOMOUS ROBOTICS Organized by ATAL,
Planning & Design FTTH & CCTV Network for held at UIET Kurukshetra. It was five days of workshop.
Purvanchal Silver city 2 WORK EXPERIENCE
Kurukshetra
I have 1 Year of signalling and design experience in Hitachi where I
Responsibilities
learned a lot and understand different and method and way to find
Use AutoCAD for Planning & Design full Telecom FTTH
best solution of network design and implement same during the
Network and CCTV
design. My work assures the cleanness and always fulfil the purpose
First survey then plans the same.
of customer (Indian railways etc), phrases me for the same. For the
Made Site Layout, Riser Layout and CCTV layout for the society for
the same. designing purpose I basically use AutoCAD software in 2D mode and
Use software such as Google Earth, Google Map, Map marker planning to move on other useful software that might help in that
and AutoCAD 2013.
Project Bi-Directional (Auto Section with dual detection)
Also simulate the the network by using Optiwave system
Client Indian Railway
software.
Equipment Microlok-II
Made BoQ for the same.
Team Size 3
Major Project Description As a Trainee Signalling Design Engineer, I was
Automatic Hand Sanitizer Dispenser producing the Vital and Non-Vital Interface
Achievements/Tasks design using source documents, I was responsible
Inside the project we use IR proximity sensor detects the to design bit chart, relay rack and interface
presence of a hand and makes the OUT-pin LOW. Normally OUT circuits as an initial design.
pin keeps HIGH. When it goes low it turns on the PNP transistor
and the pump becomes on. I used the BD136 power transistor Section-KULWA-SOMNA(LSC21)&MEHRAWAL-
for the circuit. A 1K resistor is connected between sensor OUT KULWA(LSC22/23)(Prayagraj Division)
and the base of the transistor. It protects the transistor from
burning out. Project Provision of third line between JHANSI-BINA
For powering the circuit and the motor a 14500 Li-ion cell is used Section (New EI)
and it relates to a USB charging circuit. Client Indian Railway
The dispenser is ready. You can now fill your dispenser with Equipment Microlok-II
whatever liquid you want. Team Size 3
Description As a Trainee Signalling Design Engineer, I was
producing the Vital and Non-Vital Interface design
HOBBIES using source documents, I was responsible to
design bit chart, relay rack and interface circuits
as an initial design.Station-GEHLOTA & SAKHUN
(JAIPUR Division)
Project Provision of Hot Standby System (New EI) Project In connection with provision of new ‘b’ class
Client Indian Railway station between Rewa-Sindhi section.
Equipment Microlok-II Client Indian Railway
Equipment Microlok-II
Team Size 3
Team Size 1
Description As a Trainee Signalling Design Engineer, I was Description As a Trainee Signalling Design Engineer, I was
producing the Vital and Non-Vital Interface producing VDU data base design using source
design using source documents, I was documents.
responsible to design bit chart, relay rack and
interface circuits as an initial design. Station – SILPARA STATION (JABALPUR DIVISION)

Station – ATELI (JAIPUR Division), RAIKA BAG

Project Provision of direct reception of train into non
PALACE, BANAPURA (BHOPAL Division), ICAHULI
interlocked yard freight examination lines
(JHANSI Division) & CHURHAT (JABALPUR
Client Indian Railway
DIVISION)
Equipment Microlok-II
Team Size 3
Project Auto Section with dual detection (New EI). Description As a Trainee Signalling Design Engineer, I was
Client Indian Railway producing application data design using source
Equipment Microlok-II documents.
Team Size 3
Description As a Trainee Signalling Design Engineer, I was Station – PHULERA JUNCTION & GOVINDHGARH
producing the Vital and Non-Vital Interface (JAIPUR DIVISION)
design using source documents, I was
responsible to design bit chart, relay rack and
interface circuits as an initial design.

Station – ATHSARAI-SIRATHU, KANWAR-

ATHSARAI, KATHOGAN-KANWAR, KHAGA-
KATHOGAN, SATYANARAYNI-KHAGA,
FAIZULLAPUR-RAMWA, FATEHPUR-RAMWA

Project Provision of Hot Standby System (New EI) with

dual VDU
Client Indian Railway
Equipment Microlok-II
Team Size 1
Description As a Trainee Signalling Design Engineer, I was
producing VDU data base design using source
documents.

Station – MAONDA (JAIPUR DIVISION) &

CHURHAT (JABALPUR DIVISION)

Project Provision of Double Distant Signal

Client Indian Railway
Equipment Microlok-II
Team Size 1
Description As a Trainee Signalling Design Engineer, I was
producing VDU data base design using source
documents.

Station – LADPURA (JAIPUR DIVISION) &

GEHLOTA & SAKHUN (JAIPUR Division)

Project Provision of Double Distant Signal

Client Indian Railway
Equipment Microlok-II
Team Size 1
Description As a Trainee Signalling Design Engineer, I was
producing the Vital and Non-Vital Interface
design using source documents, I was responsible
to design bit chart, relay rack and interface
circuits as an initial design. Station-GEHLOTA &
SAKHUN (JAIPUR Division)